Byggesett Tamiya Vintage-Øvrige

Tamiya 47330 The Bigwig 4WD 2017 Kit Dette er release av orginalen fra 1986 Nødvendig tilbehør: 1 x servo Radio/Motaker Regulator (ESC kompatibel med 25T GT tuned motor)Vi kan anbefale denne HW1060 Batteri/Lader Ønsket lakk til lexan karosseri PS Enkel starterpakke med Radio/Motaker, Servo, 7.2V 2000mAh Nimh Batteri med enkel USB lader ( M-STYLE ) Se under relaterte produkter for anbefalt tilbehør:   Specifications ★Length: 390mm ★Width: 235mm ★Height: 140mm ★Approx Weight: 1,340g (excludes R/C equipment) ★Wheelbase: 262mm ★Tread (F/R): 200mm/198mm ★Tire Width/Diameter: 30mm/88mm (Front), 38mm/88mm (Rear) ★ABS Resin Bathtub Frame ★Shaft-Driven 4WD ★3-Bevel Differential Gears ★Rack & Pinion Steering ★4-Wheel Independent Double Wishbone Suspension ★CVA Oil Dampers x4 ★Gear Ratio = 8.7:1 or 10.04:1 ★GT-Tuned Motor Included (features unique sticker) ★Requires Electronic Speed Controller (sold separately) Separately Required Items ★2-Channel R/C Unit with ESC ★Battery Pack & Charger,  ★R6/AA/UM3 batteries for transmitter The extremely stable shaft-driven 4WD drive train has excellent efficiency thanks to full ball bearings, while differential gears ensure cornering is smooth. 4-wheel independent double wishbone suspension employs A-shaped front and H-shaped rear arms for excellent durability, with CVA oil dampers for high-quality suspension stroke. Dish wheels are not just aesthetically pleasing, but also practical on the off-road surfaces the Bigwig (2017) calls home; they are paired with grippy oval bock tires. The rack and pinion steering setup remains unique to the Bigwig among Tamiya R/C cars. The Tamiya one of a kind classic is back! The BIGWIG 4WD off-road buggy was released back in 1986 to commemorate 10 years of Tamiya R/C models and was the first Tamiya car with a body designed by an outside designer: Japanese full size race car designer and team owner Takuya Yura. This re-release version is based closely upon the original, with some tweaks to bring it up to date. The Tamiya one of a kind classic is back! The BIGWIG 4WD off-road buggy was released back in 1986 to commemorate 10 years of Tamiya R/C models and was the first Tamiya car with a body designed by an outside designer: Japanese full size race car designer and team owner Takuya Yura. This re-release version is based closely upon the original, with some tweaks to bring it up to date. Ready to Go Big The Bigwig is back! This is a 2017 version of the shaft-driven 4WD buggy that was released to commemorate 10 years of Tamiya R/C models back in 1986. It features a number of updates while keeping largely to the classic design of the original. The slimline body is that penned for the 1986 Bigwig by famed Japanese designer Takuya Yura, still a classic today, and which possesses advanced aerodynamics thanks to his encyclopaedic design knowledge. Updated markings retain the flavor of the original Bigwig, and include the Mooncraft logo of Yura’s design company. Body design: Takuya Yura Takuya Yura is a highly-regarded Japanese designer, active in many fields and known particularly for his racing car designs. He is President of the Mooncraft company. King of the Off-Road

Tamiya 47348 1/10 Grasshopper Candy Green Edition Kit Candy Green Edition kit fra Tamiya, du trenger i tillegg. Drev for bruk sammen med 540motor 18t 32P 0.8M Du trenger i tillegg. 1 x servo Radio/Motaker Regulator/ESC : Vår anbefaling : Quicrun HW1060  Klarlakk hvis man vil ha blank finish Kulelager som option: 1150 x 9 stk 850 x 1 stk Se under relaterte produkter for anbefalt tilbehør: This is Candy Green Edition Grasshopper RC Kit. The original Grasshopper was released in 1984 which instantly became a hobby car kit hit throughout the 1980’s and 90’s. Even today it is one of Tamiya’s most successful kits thanks to its ease of assembly and fun driving capabilities.   Type Detail Scale 1/10 Construction type Assembly kit Terrain use Off-Road Drive-train 2WD Drive type Gearbox Drive line Solid axle Differential type Gear Suspension Independent swing axle front and rigid axle rear suspension Steering mechanism Direct servo Shock damper Friction damper Shock damper material Plastic Tire type Rubber Tire tread Grooved front/paddle rear Body material ABS Plastic Chassis material Plastic Electronic Speed Control (ESC) Not Included ESC model n/a LED Light buckets No LED lights No Motor 380-brushed type Bearings Plastic bushing Adjustable camber Fixed Adjustable toe angles Front only Adjustable ground clearance Fixed Adjustable gear ratio Fixed Adjustable wheelbase Fixed Adjustable track width Fixed Adjustable shock angle Fixed Special feature 1   Special feature 2   Special feature 3 The simple but tough 2WD chassis features a monocoque setup that can absorb any type of rough handling. Special feature 4   Requires A 7.2 battery & charger Requires B 2-channel radio gear   The best-selling 1/10, 2WD electric Grasshopper Kit is now available in a Candy Green version that's tailor-made for terrific off-roading! Highlights include a powerful 380 motor, a TBLE-02S ESC, grooved front tires, sand paddle rear tires, five-spoke white wheels, direct-to-servo steering and much, much more. • ABS resin tub chassis. • Two-wheel solid axle rear drive. • 380-size brushed motor, upgradable to a 540 motor (sold separately) for even more power. •  Molded plastic body is painted Candy Green and fastens to the chassis with screws. • Plastic-body friction shocks. • Direct-to-servo steering with servo saver. • Reinforced resin front bumper. • Front swing axle and rigid rear axle suspension, plus a rear straight axle with differential. • Gear differential. • Sealed gearbox. • Grooved front and sand paddle rear tires. • 1.6" (41 mm) diameter three-piece five-spoke white wheels. • Fixed camber. • Adjustable front toe-in. • Full set of plastic bushings.

Tamiya 47350 1/10 Top Force 2017 4WD Kit Top Force er tilbake, dette er RE-Release byggesett av 1991 modellen. Nødvendig tilbehør: Radio/Motaker Regulator (HW1060-1080)  Servo Batteri/Lader Lexan Lakk Vi anbefaler kulelager om bilen skal brukes denne trenger 16 stk 1150 (5x11x4mm) og 10 stk 850 (5x8x2.5mm) lager. Special Edition R/C Product 1/10 R/C Top-Force (2017) Item No: 47350 Length: 400mm. Image shows assembled and painted kit.   Re-release of a Commemorative Model The Top-Force was originally produced in 1991 to mark Tamiya's 100th R/C product release. Lessons learned in actual races were incorporated into this buggy, including features such as the low, wedge-shaped body, large rear wing with built-in flaps, and underbody cowling. Square spike tires give the Top-Force excellent traction on any surface.   Race-Ready Off-Road Buggy The simple and practical FRP double deck frame sees components mounted on the lower deck for a low center of gravity. Both front and rear gearboxes are equipped with precision-made ball differentials, which give limited slip diff. effect and provide awesome cornering ability. Hard propeller shaft and universal shafts increase power transmission efficiency for faster lap times. The suspension system features adjustable upper arms that allow camber angle customization and metal bearings in the steering arms ensure sharp steering response.   Specifications ●Length: 400mm ●Width: 249mm ●Height: 187mm ●Wheelbase: 270mm ●Tread: (Front) 217mm, (Rear) 205mm ●Minimum Ground Clearance: 32mm ●Tire Width/Diameter: (Front) 32/82mm, (Rear) 41/82mm ●2mm FRP Double Deck Frame ●Shaft-Driven 4WD ●Front/Rear Ball Differentials ●3-Piece Steering Tie Rod ●4-Wheel Double Wishbone Suspension ●Gear Ratio: 8.59 (Standard) ●Type 540 Motor ●Electronic Speed Controller   Separately Required Items ●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter Information is current as of June 5, 2017. Specifications are subject to change without notice.

Tamiya 47381 1/10 Super Astute (2018) Kit Nødvendig tilbehør: 1 x servo Radio/Motaker Batteri/Lader Ønsket lexanlakk PS Motor og Regulator(ESC) Se under relaterte produkter for anbefalt tilbehør: Length: 379mm. Image shows painted and assembled kit.   A Super Legend This re-release version of the Super Astute 2WD buggy assembly kit features updates while keeping largely to the design of the original released in 1991. It features a 2.5mm thickness FRP chassis with low center of gravity, plus 4-wheel double wishbone suspension employing CVA oil dampers, while metal bearings in suspension and steering linkage give sharp steering response. The built-in TTC (Tamiya Traction Control) system protects gears from impacts and gives stable drive, even on low-grip surfaces, allowing full enjoyment of the off-road. An efficient 0.5 module gear is included. High-traction front rib-spike and rear square spike tires provide superb response and awesome cornering. The model comes with a durable and lightweight polycarbonate body and rear wing, plus a protective undercowl.   Introducing the TTC The TTC (Tamiya Traction Control system) both protects internal gears from impact and limits wheelspin for a more stable drive. Setup is simple, and can be performed with the unit attached to the model, removing the cap on the gearbox cover then adjusting the lock nut position. 0.5 module pinion gear gives efficient drive and great acceleration.   ★Left: Semi-double deck frame consists of main frame and sub-chassis: a race-proven setup that is both streamlined and highly rigid. ★Right: R/C equipment and battery positions secure a low center of gravity. The use of low-profile servos is recommended.   ★Left: This image gives a close-up look at the heart of this model's drivetrain: the TTC system with 0.5 module gear. ★Right: The FRP main chassis is a stylish shade of black. Different rear upright positions allow 3 differing centers of gravity.   Specifications ★Length: 379mm, Width: 245mm, Height: 150mm ★Wheelbase: 264mm　★Tread: 210mm (Front), 203mm (Rear) ★Tire Width/Diameter: 21/85mm (Front), 41/82mm (Rear) ★2.5mm FRP Semi-Double Deck Frame ★Rear-Wheel 2WD ★Planetary Gear Differential ★Tamiya Traction Control (TTC) system ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension with CVA Short Shock Units (Front) & CVA Long Shock Units (Rear) ★Gear Ratio = 8.49:1 (using kit-standard 0.5 module 25T pinion gear) ★Motor and Electronic Speed Controller (ESC) are sold separately.   Separately Required Items ★Motor ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery Pack & Charger Information is current as of January 7, 2019. Specifications are subject to change without notice.

Tamiya 47390 - 1/10 Avante (2011) Black Special Kit Identisk nyutgivelse av 84270 Avante 2011-settet, som er en nyutgivelse av den originale 58072 Avante Dette er en Limited-Edition Black Special-utgivelse, som opprinnelig ble utgitt for å minnes 35-årsjubileet for Tamiya R/C-bilprodukter. Den har et fargevalg inspirert av Mini 4WD-fetteren Avante Black Special. Nødvendig tilbehør: Radio/Motaker Regulator (HW1060-1080)  Servo Batteri/Lader Lexan Lakk Om Avante: Bilen har et unikt akseldrevet 4WD-system som ble hentet fra Tamiyas første 4WD R/C-buggy, Hotshot. Den har en svært sofistikert design, inkludert en FRP-dobbelt-dekks chassislayout, langsgående motor- og batteriposisjoner, og et formel-type karosseri med chassiskåpe. Den er utstyrt med innovative komponenter som en kompakt girkasse med 3 små planetgir, en senterdiff for å øke stabiliteten, en fullt justerbar fjæring. Den moderne spesifikasjonen til bilen har noen få oppdateringer, som universelle drivaksler og maskinerte aluminiums hjulnav, som gir denne versjonen økt holdbarhet og ytelse i forhold til originalen. • 1/10 skala R/C akseldrevet 4WD buggy byggesett. Lengde: 420mm, bredde: 240mm, høyde: 140mm. Akselavstand: 260 mm. • Karbonfiberdeler som 2 mm tykkelse øvre og nedre dekk, pluss bakre demperstag gir suveren styrke. • Inkluderer Avante (2011) Racing-styringssett, med en 2 mm tykk karbonfiberstyreplate og 850 kulelager som gir silkemyk bevegelse. • Inkluderer Avante (2011) Torque Splitter Set, med momentdeler og kuledifferensialer for sikker trekkraft. • 4-hjuls oppheng med dobble bærearmer har metallaksler for god tilpasningsevne. • Hjulnav foran i aluminium. • Knastedekk er montert på fluorescerende rosa felger. • Leveres med en 25-turn motor som leveres på en spesiell “label” • Krever: 2-kanals radio, servo, ESC (elektronisk hastighetskontroll) 7,2 volt batteripakke og lader, og Tamiya PS maling. Mini 4WD Special Enlarged This updated, re-released version of Tamiya's legendary 1988 Avante buggy features the cool color scheme of the Mini 4WD Avante Black Special. It comes equipped with hybrid spike tires mounted on vivid fluorescent pink lightweight wheels to add to its eye-catching appearance.   Select Options Included The shaft-driven 4WD chassis features carbon fiber upper/lower decks (2mm) and rear damper stay (3.5mm) which ensure superb strength. Front/rear ball differentials and center torque splitter help provide sure-footed traction. Racing steering set with 2mm thick carbon fiber plate offers linear steering response. 4-wheel double wishbone suspension with metal shafts and oil dampers allows a high degree of setting customization. Aluminum front knuckles feature the same shape as those on the original Avante and radius arm protector absorbs shocks to prevent damage to suspension arms. A total of 26 ball bearings contribute to the model's smooth power.   ★Left: 2mm carbon fiber double deck chassis secures excellent performance for this off-road racer. ★Right: Racing steering set features a 2mm thick carbon fiber plate as standard in this kit.   ★Left: 25T Type 540 motor features a dedicated sticker designed for the Avante (2011) Black Special. ★Right: Vibrant fluorescent pink molded wheels add a splash of color to the overall look.   Specifications ★Length: 420mm, Width: 240mm, Height: 140mm ★Wheelbase: 260mm ★Tread (F/R): 200mm ★Tire Width/Diameter: 32/88mm (Front), 40/88mm (Rear) ★2mm Carbon Fiber Double Deck Frame ★Longitudinally-Mounted Motor, Shaft-Driven Full-Time 4WD ★F/R Ball Differentials & Center Torque Splitter ★3-Piece Steering Tie-Rod with 2mm Carbon Fiber Steering Plate ★4-Wheel Double Wishbone Suspension ★Oil Dampers with Metal Cylinders ★Gear Ratio = 8.33:1 ★25T Motor included　★Requires an Electronic Speed Controller (sold separately)   Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery Pack & Charger Information is current as of January 8, 2019. Specifications are subject to change without notice.

Tamiya 47443 1/10 1996 Porsche 911 GT1 Street TA03R-S 4WD Kit Byggesett av 996 Porsche 911 GT1 Street , du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Regulator Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) * ved valg av lipo må overgang AM-8003 benyttes eller lodde om ESC til t-plug/Deans. Se anbefalt tilbehør under relaterte produkter.   LAKK Length: 444mm. Image shows painted and assembled kit. Kulelager til bilen kommer i tillegg: 6x12x4mm   x 4 10x15x4mm x 4 5x11x4mm   x 8 5x8x2.5mm  x 4 3x7x3mm    x 2    90s Powerhouse Developed by Porsche for the 1996 endurance racing season, this car was based upon the 911 (993) with carbon fiber body panels and a midship mounted 600hp 3.2-liter flat-6 twin turbo engine. In addition to three works cars, a number were also said to have been developed for private customers and use upon public roads. This assembly kit creates an R/C model of such a "Street" car, with the sleek, powerful body captured in lightweight polycarbonate and separate parts for the side mirrors and rear wing. Stickers are included to recreate markings, headlights, taillights and more.   ★Left: The stretched form of the body with big rear fenders is accurately captured in lightweight polycarbonate. ★Right: Side mirrors on the front fenders are separate parts, with stickers recreating mirror surfaces.   ★Left: A big wing and rear spoiler really add to the racy look of the car. Both are captured using separate parts. ★Right: Mesh wheels are employed front and rear, with different offsets. Racing slicks have sponge tire inserts.   Efficient and Agile: the TA03R-S Efficient single belt-driven 4WD and quick steering response are the calling cards of the midship motor, short wheelbase TA03R-S chassis. Gearboxes front and rear house differentials for smooth cornering, and are sealed to protect the workings from dust and dirt, while high-performance double wishbone suspension employs oil dampers and utilizes dedicated touring car geometry (camber, caster, etc.), plus delta box lower arms for greater reliability.   ★Left: The 3-piece steering tie-rod uses a center input setup to help ensure a smooth, intuitive drive. ★Right: CVA Super Mini oil dampers are fitted front and rear on the double wishbone suspension.   ★Left: Here is the motor in its midship mount, the heart of the TA03R-S' efficient belt-driven 4WD. ★Right: The rear suspension setup uses reliable delta box lower arms, again with CVA oil dampers.   Specifications ★Length: 444mm, Width: 194mm, Height: 120mm ★Wheelbase: 237mm ★Tread: 157mm (Front), 165mm (Rear) ★Belt-Driven 4WD ★3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★CVA Oil Dampers ★Gear Ratio = 8.51:1 (kit-standard 14T pinion) ★Tire Width/Diameter: 25/59mm (Front & Rear) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of April 6, 2020. Specifications are subject to change without notice.

Tamiya 47470 1/10 Top Force EVO 2021 4WD Kit Top Force er tilbake, dette er RE-Release byggesett av 1992 modellen. Ferdiglakkert i svart/gunmetallic. Impressive Indeed! Dette byggesettet er en nyutgitt og oppdatert versjon av Top-Force EVO., En buggy som først ble utgitt i 1992. Karosseriet og bakvinge er støpt i polykarbonat/lexan ferdig malt i gunmetallfarge, akseldrevet 4WD-drivverk bruker tre differensialer og universelle drivaksler, og chassiset er basert rundt en stiv og lett karbonfiber dobbeltdekkramme med støtdempertårn og batteriplater laget i samme materiale. Modellen er ikke bare kompatibel med 7,2V Racing Pack-produkter, men også LF2200-6,6V Racing Pack. Nødvendig tilbehør: Radio/Motaker Servo Batteri/Lader Kulelager medfølger: Erstatnings kulelagre: 2stk 730 (3x7x3), 10stk 850 (5x8x2.5), 16stk 1150 (5x11x4) Race-Oriented Shaft-Driven 4WD Chassis This chassis features a race-oriented design with a lightweight carbon fiber double-deck layout that supports the gearboxes with 2mm thickness carbon fiber plates. A drivetrain with ball differentials front and rear and center one-way contributes towards sharp steering response, while front and rear assembly type universal shafts offer superior efficiency. Four-wheel independent double wishbone suspension employs oil dampers with aluminum cylinders, while turnbuckle upper arms allow camber adjustment. Vibrant orange wheels are paired with grippy spike tires.   ★This model features a highly refined polycarbonate body design that oozes speed; stickers are included in the kit to decorate it. ★A 4WD setup employs a steel propeller shaft to the right of the upper deck. Drivetrain and steering linkage feature efficient ball bearings. ★This image gives a close-up on the front double wishbone suspension, which also features turnbuckle shaft upper arms for easy adjustment.   ★Upper and lower decks, plus front and rear damper stays, and battery plates are crafted in lightweight, rigid carbon fiber material. ★This image of the double-wishbone rear suspension shows off the dampers with aluminum cylinders. Universal drive shafts are employed front and rear. ★Gear covers can be removed simply with the loosening of four screws, allowing easy access to the differentials for swift maintenance.   ★Alluring, vibrant orange color dish design wheels are paired with spike tires that ensure the Top-Force Evo. has plenty of grip. ★There is exemplary protection from dust, dirt and other potential infiltrators thanks to the kit's tough polycarbonate undercowl. ★An epic polycarbonate wing on the rear of the buggy features integrated end plates and a slatted design that really looks the part.   Specifications ★Length: 400mm, width: 250mm, height: 190mm ★Wheelbase: 270mm ★Tread: 217mm (front), 205mm (rear) ★Carbon fiber double deck frame ★Shaft-driven 4WD ★Front & rear ball differentials ★Center one-way ★3-Piece steering tie-rod (with ball bearings) ★4-Wheel independent double-wishbone suspension ★Tire Width/Diameter: 32/82mm (front), 41/82mm (rear) ★Aluminum cylinder oil dampers ★Gear Ratio = 8.59:1 ★Type 540 motor ★Full ball bearings ★Electronic Speed Controller (ESC) incl.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of May 28, 2021. Specifications are subject to change without notice  

Tamiya 47471 1/10 The Grasshopper II Black Edition Kit Grasshopper II kit fra Tamiya, med lakkert karosseri dette er relansert versjon fra 1988! Drev for bruk sammen med 540motor 18t 32P 0.8M Special Hopper! Dette byggesettet skaper en spesiell Black Edition av Grashopper II, en nippy og morsom 2WD radiostyrt bil. Den er basert på et tøft chassis med svingaksel foran og stive fjæringsoppsett bak med spiralfjærer for en morsom tur. Grå hjul gir en subtil fargevariasjon fra den svarte karosseriet, som er støpt i styrene og kan dekoreres med de medfølgende klistremerkene; de har oransje og gullmotiver som virkelig vil fange øyet. En sjåførfigur er også inkludert. Du trenger i tillegg. 1 x servo Radio/Motaker Batteri/Lader TS Klarlakk hvis man vil ha blank finish Se under relaterte produkter for anbefalt tilbehør: A Durable Off-Road Chassis A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance.   ★Left: This image gives a closer look at the front swing axle suspension setup, which is coil sprung. The front bumper is molded plastic. ★Right: The rear gearbox is integrated with the axle case. Smooth, easy-to-handle power is provided courtesy of the Type 380 motor.   ★Left: Gray wheels are an excellent choice to partner the black body; they are paired with front grooved and rear spike pattern tires. ★Right: The model's battery pack is positioned longitudinally, and can be accessed efficiently from the underside of the chassis.   Specifications ●Length: 400mm, Width: 223mm, Height: 136mm. Weight: 760g (excluding R/C equipment) ●Wheelbase: 253mm ●Tread (Front & Rear): 186mm ●Tire Width/Diameter: 19mm/74mm (Front), 36mm/82mm (Rear) ●ABS Bathtub Type Frame ●Rear-Wheel Drive ●3-Bevel Differential ●2-Piece Steering Tie-Rod ●Suspension: Front Swing Axle, Rear Rolling Rigid ●Gear Ratio = 14.7:1 ●Type 380 Motor ● Electronic Speed Controller (TBLE-04 included)   Separately Required Items ●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger Information is current as of July 16, 2021. Specifications are subject to change without notice.  

Tamiya 47489 - Egress Black Edition 1/10 Kit Dette er en fargevariasjon av 1/10 Egress (2013) (Artikel 58583) – med nye klistremerker, dempere og uprights som passer til ett svart lakkert karrosseri (Karrosseri må lakkeres). Det svarte fargevalget forsterker det stilige bildet til Egress, og emballasjen med svart tema som 1/10 Avante (2011) Black Special (Artikel 47390) fanger øynene dine. Nødvendig tilbehør: Radio/Motaker Styreservo Motor Regulator/ESC Batteri og lader PS lakk Way Out Style! Dette byggesettet skaper en spesiell Black Edition av den legendariske Egress R/C buggyen, som opprinnelig tok verden med storm etter debuten i 1989, og fikk deretter en ytterligere oppdatering i 2013. Som navnet antyder, er fargevalget tydelig svartbasert, med dempere frontstående og byttet til mørke titananodiserte overflater, og hjulene med seks eiker støpt i sølv for å matche et karosseri som skal lakkeres svart. Akseldrevet 4WD-chassis med karbonkomponenter Dette akseldrevne 4WD-chassiset har en langsgående motor og fullt kulelagret, Mens karbonfiber øvre og nedre dekk sikrer at modellen har suveren stivhet. Kuledifferensialer foran og bak gir utmerket pålitelighet og enkelt vedlikehold, og fungerer sammen med det innebygde senteret enveis for å gi sikker bevegelse, og enveislageret kan låses om ønskelig. Universelle drivaksler har samme design som de som brukes i i TRF-serien, for å maksimere overføringseffektiviteten og minimere slitasje. 4-hjuls dobbel wishbone-fjæring støttes av fire oljedempere utstyrt med aluminiumsylindere, mens forsiden og baksiden av modellen er utstyrt med stabilisatorer. Aluminium foran stående gir utmerket pålitelighet, og kulelager i styrekoblingsarmer kombineres med 2 mm tykk karbonfiberplate for å tilby en lineær styrerespons. Egress takler også en snill børsteløs motorkombo. ★The three-piece steering tie-rod has a 2mm carbon fiber plate that helps to keep handling sharp and crisp. ★Dark titanium anodized uprights and oil damper parts are employed along with efficient universal shafts. ★Silver color 6-spoke wheels are paired with high-performance hybrid spike tires for a super drive.   ★Lightweight carbon fiber is employed for the 2mm-thickness decks in the rigid double-deck frame. ★The model uses a midship motor position with one-way bearing on the gear for linear handling feel. *Motor is sold separately. ★This image shows the rear suspension, which also uses efficient universal drive shafts.   ★Left: Take a closer look at the combination of high-capacity oil dampers and carbon fiber stay. ★Right: Mirrored stickers such as the rear wing slogan give the model that finishing touch.   Specifications ★Length: 430mm, width: 243mm, height: 157mm ★Wheelbase: 275mm ★Tire width/diameter: 32/88mm (front), 40/88mm (rear) ★2mm carbon fiber double deck frame ★Longitudinally-placed motor, shaft-driven 4WD ★Polycarbonate body and undertray ★Front & rear ball diffferentials, center one-way ★3-piece steering tie-rod ★4-wheel independent double-wishbone suspension ★High-capacity oil dampers with aluminum cylinders ★Gear ratio = 8.33:1 ★Type 540 motor and electronic speed controller (ESC) are sold separately.   Separately Required Items ★Type 540 motor ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of November 17, 2022. Specifications are subject to change without notice.

Tamiya 84416 1/10 Grasshopper Black Edition Kit Limited Black Edition kit fra Tamiya, du trenger i tillegg. Drev for bruk sammen med 540motor 18t 32P 0.8M Du trenger i tillegg. 1 x servo Radio/Motaker (Ferdig radiopakke med Servo, batteri og lader) Regulator (Vår anbefaling HW1060) (Er inkludert THW-1060 på kit 47522) Batteri/Lader Lakk av TS type hvis man vil lakkere TS Klarlakk hvis man vil ha blank finish Kulelager som option: 1150 x 9 stk 850 x 1 stk Hele settet 54997 Se under relaterte produkter for anbefalt tilbehør: This is a Limited Edition Grasshopper RC Kit. The original Grasshopper was released in 1984 which instantly became a hobby car kit hit throughout the 1980’s and 90’s. Even today it is one of Tamiya’s most successful kits thanks to its ease of assembly and fun driving capabilities.  Basert på enseters buggier som raste rundt på jordbaner over hele USA på 80-tallet. Grasshopper dukket opp i R/C-butikker i 1984. Siden den var lettvekts, lettkjørt og med enkel montering, så ble Grasshopper raskt en suksess som det perfekte nybegynnersettet innen radiostyrt bil. Den kunne også oppgraderes med en rekke tilleggsdeler, som oljedempere, 540 motor og kulelagre, noe som gjorde at bilen kunne utvikle seg i takt med førerens erfaring. Med alle de fantastiske egenskapene fra originalsettet er denne morsomme 2WD-buggyen en fryd å kjøre både på offroad- og asfaltbaner. Enten dette var din første – eller blir din første – vil Grasshopper garantert falle i smak. Den perfekte kombinasjonen av enkel montering og et robust ytre er det som gjorde Grasshopper så spesiell. Det slitesterke plastkarosseriet festes til et monocoque (bathtub style) chassis med skruer, noe som gir en solid ramme som tåler røff behandling. Offroad baner takles lett takket være friksjonsdempere, uavhengig svingaksel oppheng foran og stiv bakaksel bak. En lukket girkasse med differensial holder smuss og småstein ute, for jevn kjøring og stabile svinger. Paddle bakdekk og rillede frontdekk, kombinert med tredelte felger, gir utmerket grep på jordbaner. En figur av føreren setter prikken over i’en på denne morsomme offroad bilen. Spesifikasjoner Lengde / bredde / høyde: 389 × 223 × 135mm, vekt: 830g Motor: type 380 (chassis kompatibelt med 540 motor (benyttes sammen med pinion 3948X), selges separat) Drivverk: Bakhjulsdrift (2WD) Forhjulsoppheng: uavhengig svingaksel | Bakaksel: stiv aksel | Friksjonsdempere Forseglet bakgir for å beskytte differensialen under offroad-kjøring 3-delte hjul | Rette, rillede racing fordekk | Paddle dekk bak Front- og bakaksel kompatibel med kulelager (selges separat) Må kompletteres med: Radio og mottaker Servo NiMH eller LiPO batteri Batterilader

Tamiya 1/8 R/C Dancing Rider T3-01 Chassis Kit Nødvendig tilbehør: Radio/Motaker Regulator Servo Batteri/Lader PS-Lakk   Lord of the Dance This R/C model assembly kit creates the Dancing Rider, a supremely fun 3-wheeled model that offers an exciting lean when cornering. An original body is included with the kit, and was designed under the supervision of famed Japanese artist Atsushi Arino. It is molded in lightweight polycarbonate, and comes with a molded driver figure for an extra touch of fun. T3-01 Chassis: Designed for Fun The T3-01 is a three-wheeled chassis comprised of two main sections (front and rear) connected by a center link; the front section houses R/C equipment and the power source, while the rear holds the integrated gearbox and motor. Positioned in the back of the front section, the servo applies motion to the rear section, which in turn makes the front lean. Support arms are moved by the servo, and help the model to self-right in the event that it turns onto its side. At the front, a telescopic fork has a built-in coil spring, while the rear features a cam-slide setup with cams on the rotating pitch axis: sliding left and right, they actuate the built-in coil spring to cushion the rear. A planetary differential gear is integrated into the rear axle. Specifications ★Length: 260mm ★Width: 135mm ★Height: 175mm ★Wheelbase: 196mm ★Tread (Rear): 91mm ★Tire Width/Diameter 21/61mm (Front), 25/59mm (Rear) ★Monocoque Chassis ★Rear-Wheel Drive ★Planetary Differential Gear ★Front Suspension: Telescopic Fork ★Rear Suspension: Cam-Slide ★Gear Ratio = 10.7:1 ★Requires an Electronic Speed Controller (sold separately) ★Type 370 Motor included Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Power source ★Stylish body design was overseen by Japanese artist Atsushi Arino, and is molded in lightweight polycarbonate. ★The body is inspired by delivery trikes commonly seen in Japan, and will be suited to a range of color schemes. ★T3-01 chassis is comprised of front (with R/C equipment and power source) and rear (motor, gearbox) sections. ★The trademark cornering lean is achieved by the servo acting on the rear section, in turn tilting the front. ★Internal spring in the front fork gives stability even at low speeds. A housing allows attachment of LEDs . ★A close-up on the telescopic front fork suspension, which gives a realistic ride. ★Cams on the rotating pitch axis slide left and right, cushioning the rear via the built-in coil spring. ★Support arms move in concert with the steering servo, and aid the model in righting itself. ★Side guards both protect the body during crashes and hold it in place with the chassis.

Tamiya 1/8 R/C Dual Rider T3-01 Chassis Kit Nødvendig tilbehør: Radio/Motaker Servo Regulator Batteri/Lader PS-Lakk   3-Wheeled Leaning Fun! This R/C model assembly kit creates the Dual Rider, a fun 3-wheeled model with a futuristic Takayuki Yamazaki-designed body featuring a prominent overarching canopy. It is molded in lightweight polycarbonate. The included driver figure offers numerous arm positions and headgear options, while separately sold LEDs can be used for the headlight.   ★A futuristic, sweeping canopy is one highlight of the polycarbonate body designed by Takayuki Yamazaki. ★A look at the rear end of the model showcases the unique "chopped-off" style employed on the Dual Rider. ★T3-01 chassis is comprised of front (with R/C equipment and power source) and rear (motor, gearbox) sections.   ★The headlight design features a digital motif that also provides the front with a futuristic air. ★Attaching light housing component to the front fork allows installation of separately sold LEDs. ★A close-up on the T-shirted driver figure, who was also designed by Takayuki Yamazaki.   ★Options abound, with a selection of helmet styles, eye stickers, instrumentation and more! ★An internal spring built in to the front fork gives the Dual Rider great stability, even at low speeds. ★A close-up on the telescopic front fork suspension, which gives the model a realistic ride.   ★Cornering lean is achieved by the servo acting on the cam slide suspension-fitted rear section. ★Support arms move in concert with the steering servo, and aid the model in righting itself. T3-01 Chassis: Designed for Fun The T3-01 is a three-wheeled chassis comprised of two main sections (front and rear) connected by a center link; the front section houses R/C equipment and the power source, while the rear holds the integrated gearbox and motor. Positioned in the back of the front section, the servo applies motion to the rear section, which in turn makes the front lean. Support arms are moved by the servo, and help the model to self-right in the event that it turns onto its side. At the front, a telescopic fork has a built-in coil spring, while the rear features a cam-slide setup with cams on the rotating pitch axis: sliding left and right, they actuate the built-in coil spring to cushion the rear. A planetary differential gear is integrated into the rear axle.   Specifications ★Length: 260mm ★Width: 135mm ★Height: 185mm ★Wheelbase: 196mm ★Tread (Rear): 91mm ★Tire Width/Diameter 21/61mm (Front), 25/59mm (Rear) ★Monocoque Chassis ★Rear-Wheel Drive ★Planetary Differential Gear ★Front Suspension: Telescopic Fork ★Rear Suspension: Cam-Slide ★Gear Ratio = 10.7:1 ★Requires an Electronic Speed Controller (sold separately) ★Type 370 Motor included   Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Power source Information is correct as of April 3, 2019. Specifications are subject to change without notice.

Tamiya 58242 Wild Willy 2 WR-02 Kit med ESC Du trenger i tillegg: Radio/Motaker, servo, standard stickpack/lipo round corner batteri, og lader til batteri, lakk for detaljer om man ønsker. Wild Willy 2 WR-02 Kit fra Tamiya, veldig detaljert og morsomt byggesett, støpt militær grønn farge, karosseriet sitter på WR-02 chassiet fra Tamiya og er en utrolig morsom bil. Settet leveres i ett kit for bygging og lakkering og gir mange timer med moro både i byggeprosess og i kjøreglede da den er ferdig. For å komplettere kitet må man ha 1 stk styreservo, radio og motaker, batteri 7.2V Nimh eller 7.4V Lipo(må være såkalt Round Corner pakke,runde kanter med *Tamiyakontakt, egnet lader for valgt batteri, verktøy for bygging og TS lakk for karosseriet.) Girkasse og motor er ferdig montert. (*Ved valg av batteri med annen kontakt enn Tamiya kan adapter1 eller  adapter2 brukes) Radio, Servo og Batteripakke MStyle Lakk/maling anbefalt av Tamiya: TS-28 X-2 X-7 X-11 X-14 X-18 XF-2 XF-7 XF-15 XF-16 XF-56 XF-57 The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar.   Specifications Chassis: WR-02 Scale: 1/10 Length: 12.80 inches (325mm) Width: 12.20 inches (380mm) Wheelbase: 6.77 inches (172mm) Front Tread: 7.87 inches (200mm) Rear Tread: 7.87 inches (200mm) Weight: 3.77 lbs. (1710g) Chassis: ABS Monocoque Suspension: 4 wheel independent Damper Type: Plastic coil over friction Drive Train: 2WD gearbox Gear Ratio: 18.3:1 Differential Type: Bevel Gear Motor Included: Electric type 540 Wheel/Tire Type: Chrome/V-Lug Pattern Body Included: Styrene (plastic) body is molded in a military green color Radio Type: 2-Channel Surface Radio (not included) Battery Type: 7.2V Battery (not included)

Tamiya 58336 1/10 Hornet Clear Lexan Body Re-Release Kit (Inkl ESC THW-1060)  Hornet med lexan karosseri, byggesett  fra Tamiya, du trenger i tillegg. 1 x servo Batteri/Lader PS- Lakk i ønsket farge (Box Art = PS-5) X-XF maling for figuren Verktøy for montering og saks for klipping av karosseri Kulelager som option: 1150 x 9 stk 850 x 1 stk Se under relaterte produkter for anbefalt tilbehør:  Den revolusjonerende 1984 2WD terrengbilen er tilbake og morsommere enn noen gang før! Hornet står som en av Tamiyas mest populære R/C-biler som noen gang er utgitt, og nå er den relansert!!! Denne fantastiske bilen har utmerket ytelse både på grus- og asfalt-baner, og kan ta alle typer terreng. Akkurat som originalen har denne gjenutgivelsen et chassis og drivverk som er enkelt å montere. Den består av en slitesterk, men lett ABS-harpiks-badekarramme, forseglet girkasse med diffgir, oljefylte bakdempere, kraftig RS 540-motor og høyytelses fjæringssystem. Hornet er perfekt for de som pleide å ha en, de som alltid har ønsket seg en, og for de som ønsker en revolusjonerende buggy som har fortjent sin plass i R/C-historien. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere (25T) NiMH eller LiPO batteri (round case) Batterilader som matcher batteriet. Maling som anbefales av Tamiya: X-2 White X-14 Sky Blue X-18 Semi Gloss Black XF-2 Flat White XF-15 Flat Flesh PS-5 Black   The Legend Lives On!   The revolutionary 1984 2WD off-road buggy is back and more fun than ever before! The Hornet stands as one of Tamiya's most popular R/C cars ever released, helping launch a 2WD R/C buggy boom worldwide. Featuring excellent performance on both dirt and on-road tracks, this awesome buggy can take on any type of terrain. Just like the original, this re-release features an easy to assemble chassis and drivetrain consisting of a durable but lightweight ABS resin bathtub frame, diff gear loaded sealed gearbox, oil filled rear dampers, powerful RS 540 motor and high performance suspension system. The Hornet is perfect for those that used to have one, those that have always wanted one, and for those that want a revolutionary buggy that has earned its place in R/C history.   Product Specifications (Specifications subject to change) Type Detail Scale 1/10 Construction type assembly kit Terrain use off-road Drive-train 2WD RWD Drive type gearbox Drive line solid axle Differential type gear Suspension independent front/solid axle rear Steering mechanism direct servo Shock damper friction damper Shock damper material plastic Tire type rubber Tire tread pin spike Body material Clear Polycarbonate Chassis material plastic Electronic Speed Control (ESC) included ESC model Not included LED Light buckets no LED lights no Motor 540-brushed type Bearings metal and plastic bushings Adjustable camber fixed Adjustable toe angles front only Adjustable ground clearance fixed Adjustable gear ratio fixed Adjustable wheelbase fixed Adjustable track width fixed Adjustable shock angle fixed Special feature 1 Overall length: 400mm Special feature 2 Overall width: 230mm Special feature 3 Overall height: 150mm Special feature 4 Weight: 874g Special feature 5 Solid bathtub frame with side bumpers Special feature 6 Independent swing axle front suspension with friction dampers Special feature 7 Sealed rear gearbox to protect diff gear during off-road running Special feature 8 Straight ribbed racing front tires Spiked buggy rear tires Special feature 9 shock absorbent polycarbonate body shell Special feature 10 Reinforced resin bumper Requires A 7.2 battery & charger Requires B 2-channel radio gear Requires C polycarbonate paint

Tamiya 58346 1/10 The Grasshopper Kit Grasshopper kit fra Tamiya, dette er relansert versjon fra midten av 80 tallet!  Drev for bruk sammen med 540motor 18t 32P 0.8M Du trenger i tillegg. 1 x servo Radio/Motaker (Ferdig radiopakke med Servo, batteri og lader) Regulator (Vår anbefaling HW1060) (Er inkludert på kit 58346, velges i varianter) Batteri/Lader Lakk av TS type hvis man vil lakkere TS Klarlakk hvis man vil ha blank finish Kulelager som option: 1150 x 9 stk 850 x 1 stk Se under relaterte produkter for anbefalt tilbehør: Let It All Begin With This One Buggy Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a whole range of option parts such as oil dampers, 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience. Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please. The perfect combination of simple assembly and tough exterior is what made the Grasshopper so special. Durable plastic body is fastened to bathtub resin monocoque chassis by screws, creating a solid frame that can absorb any type of rough handling. Off-road tracks can be tackled with ease thanks to coil spring dampers, and independent swing axle front and rigid axle rear suspension. Diff loaded sealed gearbox keeps out the dirt and stones for smooth driving and cornering. Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip performance on dirt tracks. Half-body driver figure adds that finishing touch to a fun off-road R/C car. Basic Specifications ★Length: 389mm, width: 223mm, height: 135mm, weight: 830g ★380 type motor (chassis compatible with 540 type motor - sold separately) ★Transmission Type: Rear 2 Wheel Drive ★Independent swing axle front suspension, rolling rigid axle rear suspension, friction dampers ★Sealed rear gearbox to protect diff gear during off-road running ★3-piece assembly wheel, straight ribbed racing front tires, paddle rear tires ★Front and rear axle compatible with ball bearings (sold separately)

Tamiya 58347 1/12 Vanessas Lunch Box CW-01 Kit Byggesett av Tamiya Vannesas Lunch Box,  du trenger i tillegg for å få komplett bil, radio/motaker/servo/Regulator, batteri og lader, TS lakk. Vi kan anbefale denne regulatoren: HW1060 Skal bilen brukes anbefales det å kulelagre den: 1150 x 9 stk 850 x 1 This R/C assembly kit recreates a fun and boxy classic VAN with over-sized monster truck tires. It is one of Tamiya's classic creations from the 1980’s (First released in 1987). It has been a fan favorite for its original appearance as much as for its R/C performance. The boxy minivan body has been raised up over monster truck wheels to ensure that this R/C van will grab the attention wherever you choose to drive it.  2WD Chassis Mounted on Big 115mm Diameter Tires  The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swingarms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces. Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.  ●Length: 385mm, Width: 290mm, Height: 225mm ●Weight: 1,560g (not including R/C mechanism and battery) ●Wheelbase: 207mm ●Tread: 212mm (Front), 216mm (Rear) ●F/R Tire Width/Diameter: 71/115mm ●ABS Box Type Frame ●Rear-wheel 2WD ●Suspension: Independent Swingarm (Front), Rolling Rigid (Rear) ●F/R Friction Dampers ●3-Bevel Differentials ●Gear Ratio: 14.7:1 ●Type 540 Motor ●Electronic Speed Controller (Not Included)   

Tamiya 58354 - The Frog 2WD Buggy Kit inkludert Regulator Nødvendig tilbehør: Radio/Motaker/Servo Batteri/Lader PS Lakk til karosseri Akrylmaling til sjåfør og detaljer (X/XF) Reintroducing the original 2WD buggy masterpiece featuring ABS resin space frame, horizontally mounted oil dampers, inboard spring type front suspension. Powered by a Type 540 motor. Kit includes straight ribbed racing front tires and high-grip rear spiked tires. Wheels are realistic 3-piece type. Includes diff gear. Ready to assemble R/C model kit. Re-issued and revised model of the frog,which made its debut in 1983. Lightweight and durable abs space frame. Four wheel independent suspension. Differential gear for smooth cornering. Oil dampers effertively absorb shock from rough terrain. Rear high grip rubber spike tires. Front grooved tires. Lightweight and durable polycarbonate body. Includes THW-1060-RTR ESC Requires A7.2V running battery(not included). Tamiya expec 2CH. radio control system recommended. Paint not included.   ELECTRIC KITS REQUIRE: Radio: 2-Channel with servo(s) Battery: 6-cell flat with standard Tamiya connector Charger: AC/DC timed or peak for 6-cell battery Paint: Polycarbonate for spare body Misc. Items: Building and track equipment Return of the Frog! First introduced in 1983, the 2WD racing buggy Frog made a huge splash with its eye-catching design and high performance running. The Frog now makes a comeback, updated for a new age, but with its basic structure essentially unchanged. Preserving its characteristic space frame, the oil dampers for trailing-arm type rear suspension have been updated to diaphragm type. Rear drive shaft features dogbone type joint for secure power transmission. Sleek polycarbonate body remains the same, while 3-piece wheels feature front grooved and rear spike tires for excellent off-road running. 2WD Chassis Packed with Innovation Electric R/C racing buggy features ABS space frame and nylon suspension and bumper for a lightweight yet rugged form that is perfect for off road running. Battery is held in ultra-low position, giving this car the stability and weight balance to handle rough terrain and wild jumps. Advanced 4-wheel independent suspension composed of front double wishbone type featuring in-board spring and durable steel radius arm. Rear trailing arm type features horizontally mounted aluminum cylinder oil dampers for effective shock absorbtion. Sealed differential gearbox ensures high speed cornering, while full ball bearings and 3-step gear ratio secures maximum transmission efficiency. Specifications ★Overall length: 410mm, Width: 240mm, Height: 145mm, Wheelbase: 1,020mm ★Transmission type: rear 2WD ★Suspension: Front double wishbone. Rear trailing arm ★Tire width/diameter: Front 21/73mm. Rear 51/88mm ★RS-540 Type motor included

Tamiya 58374 - 1/10 Sand Viper DT-02 Kit Sand Viper kommer på DT-02 chassis som har sin batteripakke som legges på midten av “badekar” rammen og har utmerkede kjøreegenskaper selv på ujevnt underlag. Karosseri i polykarbonat (Lexan) 1 x servo Radio/Motaker Batteri/Lader Regulator (Inkludert THW-1060) Leveres med fullt sett kulelager. Ha det gøy med 2WD terrengkjøring 2WD R/C buggy med lavt tyngdepunkt, CVA oljedempere, 4-hjuls fjæring med doble bærearmer og 14 kulelagre. En spennende høyytelsespakke. Karosseriet er laget av slitesterk, lett polykarbonat. De gråfargede felgene står fint i stil til det gule fargeskjemaet. Dekkombinasjonen sikrer utmerket trekkraft på alle underlag. DT-02 chassiet har optimal balanse og drivverk med konsekvent og effektiv kraftoverføring. 540 motor medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere NiMH eller LiPO batteri Batterilader PS maling Enjoy Fun 2WD Off-Road Action This all-terrain 2WD buggy R/C assembly kit features a low center of gravity bathtub frame, oil damper-equipped 4-wheel double wishbone suspension, and full ball bearings for an exciting high-performance package. The edgy, stylish body is made from durable, lightweight polycarbonate and its yellow paint scheme provides a great match for the gray-colored dish wheels. Grooved front tires and rear spike tires ensure excellent traction on any surface. High-Performance 2WD DT-02 Chassis With a longitudinally-mounted battery and centrally-positioned R/C mechanisms, the DT-02 bathtub frame chassis offers optimum balance. 4-wheel independent double wishbone suspension features long suspension arms, CVA oil dampers, and adjustable upper arms that effectively absorb bumps and shocks and provide a variety of suspension customization possibilities. To prevent dirt and debris from interferring with operations, the diff gear-equipped gearbox is fully enclosed. A total of 14 ball bearings and metal parts of drive shaft and joint cup provides consistent and efficient power transmission. Specifications ●Length: 384mm, Width: 248mm, Height: 140mm ●Wheelbase: 260mm ●Lowest Ground Clearance: 26mm ●Weight: 1,042g ●Motor: Type 540 ●Drivetrain: Rear Wheel Drive ●Tread: (Front & Rear) 216mm/208mm ●Diff. Gear: 3-bevel diff. ●Steering Tie Rod: 2-piece ●Suspension: 4-wheel Double Wishbone ●Gear Ratio: 9.28:1

TTamiya 58391 Hot Shot 2007 Kit  Hot Shot 2007 fra Tamiya, kit  rerelease 1985. Leveres med regulator og motor. Nødvendig tilbehør: Radio/Motaker  Servo Batteri og Lader Ønsket lexanlakk PS Om bilen skal brukes anbefales kulelagersett 54002 (eventuellt løse lager 13 stk 1150 5x11x4 (Pakke med 16stk 54579 ) + 5stk 850 5x8x2.5 Se under relaterte produkter for anbefalt tilbehør: 【En R/C-legende vender tilbake 】 Med sin aggressive karosseridesign og lave tyngdepunkt laget Tamiya Hotshot,  deres første akseldrevne 4WD R/C-buggy, da den ble introdusert i 1985. Det unike 3-delte chassiset inkluderer innovative funksjoner som mono-sjokk oljedempere foran/bak, 4-hjuls dobbel bærearmsfjæring utstyrt med stabilisatorer, og helt lukkede girkasser foran/bak utstyrt med trykkkulelager og differensialgir. Et bredt utvalg av tilleggsdeler ble produsert spesielt for å modifisere Hotshot, og maskinen ble noe som enhver ungdom på den tiden drømte om. Fansen har ropt etter en gjenutgivelse av den epokegjørende R/C-bilen, og Tamiya tar nå tilbake denne legenden for å la fansen gjenoppleve barndomsminnene sine.   【En gammel hund med nye triks】 Tamiya-designere har gitt Hotshot en makeover, erstattet eldre deler som er vanskeligere å sette sammen med moderne ekvivalenter, men fortsatt tro mot ånden til den originale Hotshot. Mens de doble bærearmsopphengene foran/bak og justerbare mono-sjokk oljedempere forblir de samme, har drivverket moderne drivaksler av hundeben for økt pålitelighet. Oljepakningene i støtdemperne er også skiftet til den mer moderne membrantypen. Dessuten, med bruk av en moderne ESC, var den originale Hotshots bakre aluminiumskjøleribbe ikke lenger nødvendig. Hotshot ville imidlertid ikke se lik ut uten den, så løsningen vår var å installere en dummy-del for å forbli tro mot det originale utseendet. Ta denne oppdaterte Hotshot-en ut på en tur og sammenlign den med dagens R/C-buggies for å oppleve hvor langt denne hobbyen har utviklet seg! New, more efficient dog bone type front/rear drive shafts and propeller shaft.    Progressive type rear suspension features pushrod and connecting plate.    You can see the dummy aluminum heat sink clearly in this rear view.    Front/rear mono-shocks feature diaphragm type oil dampers and feature adjustable springs.    Kit includes metal maintenance stand bars, which can be used together with the battery holder to lift the car.   【 Specifications 】　●Length: 390mm　●Width: 235mm　●Height: 150mm　●Weight: 1270g　●Tread: (Front/Rear) 194mm　●Tire Width/Diameter: (Front) 28/82mm, (Rear) 34/82mm　●Frame: ABS Resin Monocoque　●Drivetrain: Shaft-driven 4WD　●Diff. Gear: 3-bevel　●Steering: 2-piece Tie Rod　●Suspension: 4-wheel Double Wishbone　● Gear Ratio: 8.1：1, 10.04：1　●Motor: Type RS540　 【 Separately Required Items 】　●2-Channel FET-equipped R/C System ●7.2V running battery & charger●Speed Controller: ESC               

Tamiya 58418 - The Boomerang (2008) Kit Gjenopplev barndommen din med denne favoritten! Det elektriske Boomerang 2008 4WD-kitet i størrelse 1/10 gjenskaper den elskede buggyen fra 1980-tallet og finjusterer den med dagens mest ettertraktede funksjoner! Den tilbyr ikke bare forbedret styring og støtdempere, men den har også en mer effektiv girkasse, drivaksler og akselledd enn originalen. Et chassisdeksel forhindrer at smuss og rusk forstyrrer moroa. Monter din favoritt 2-kanals radio, 6-cellers NiMH-batteri og lader, så er du klar! Nødvendig tilbehør: 1 x servo  Regulator (ESC)(vår anbefalig **HW1060) Radio/Motaker Batteri/Lader (Ved valg av batteri med annen kontakt enn Tamiya kan adapter1 eller  adapter2 brukes) Ønsket lakk PS til karosseri   INKLUDERER 1/10 skala Tamiya Boomerang Buggy-byggesett med karosseri, 540-motor, bruksanvisning, klistremerkeark.  Badekarchassis i ABS-harpiks. Firehjulsdrevet buggy. Motor i størrelse 540. Karosseri i klart polykarbonat (lexan). Tre oljestøtdempere i plast. Styre bellkrank med servosaver. Lukket girkasse. Bladlignende støtfanger foran med klistremerkeark. 88,5 mm ytre diameter, 50 mm indre diameter og 25,4 mm brede semipneumatiske Super Gripper-dekk foran; 90 mm ytre diameter, 50 mm indre diameter og 37 mm brede semipneumatiske Super Gripper-dekk bak. Hvite 5-hulls felger i nylonharpiks. Fast camber. Justerbar toe-in via styrestag, camber refererer til vinkelen på toppen av dekkene fra vertikalt sett forfra eller bakfra på bilen.  Styring Styrestag: Justerbare, caster/toe-in refererer til vinkelen på forhjulsopphenget sett fra siden av bilen i forhold til chassiset.   SPESIFIKASJONER CHASSIS Lengde: 245 mm Bredde: 93 mm Høyde: 76 mm KAROSSERI Lengde: 10" Bredde: 5,25" Høyde: 2,75" 70 mm

Tamiya 58452 Sand Scorcher Off-Road Racer 2010 Kit Sand Scorcher fra Tamiya, kit med mye metalldeler og med kulelager og ny THW-1060 regulator med Tamiyakontakt inkludert. Nødvendig tilbehør: 1 x servo Radio/Motaker Batteri/Lader (Batteri må være av kort type, slik som Shortypack eller lignende, dette er laget for å passe perfekt i holderen 5-1 Nimh) Ønsket plastlakk TS Se under relaterte produkter for anbefalt tilbehør:   Sand Scorcher ble opprinnelig utgitt i 1979, og ble godt mottatt av fans over hele verden med sin humoristiske form og suverene mekanisme. Denne re-utgivelsen av Sand Scorcher, som holder seg til den grunnleggende utformingen av originalen mens den inneholder mange videreutviklede deler, vil minne deg om originalen. Denne modellen gjengir realistisk den unike formen til bilen som ble sett på one-make-løpet på “Baja 1000” i California, USA. Karosseriet er støpt i hvit polystyren og kan males med Tamiya plastmodellmaling. Det bakhjulsdrevne 2WD-chassiset har realistisk og aggressiv ytelse som uten tvil vil begeistre deg. Tamiya is celebrating the 30th anniversary of the Sand Scorcher with an improved re-release of the model. The new improvements include more fine tuned parts. Just as the original, the updated Sand Scorcher features ribbed front tires and paddle rear tires. Since the Sand Scorcher and the Buggy Champ use the same chassis, the spare parts are interchangeable .   Type Detail Scale 1/10 Construction type assembly kit Terrain use off-road Drive-train 2WD RWD Drive type gearbox Drive line universal Differential type Live axle Suspension independent suspension Steering mechanism bell-crank Shock damper oil-filled damper Shock damper material aluminum Tire type rubber Tire tread radial Body material ABS Plastic Chassis material aluminum Electronic Speed Control (ESC) included ESC model THW-1060 0LED Light buckets no LED lights no Motor 540-brushed type Bearings shielded ball bearing Adjustable camber fixed Adjustable toe angles front only Adjustable ground clearance fixed Adjustable gear ratio yes Adjustable wheelbase fixed Adjustable track width fixed Adjustable shock angle fixed Special feature 1 1/10 scale R/C assembly kit of the Sand Scorcher Special feature 2 Officially Licensed Special feature 3 Comes equipped with full ball bearings to reduce friction loss Special feature 4 Type 540 motor included Special feature 5 A duraluminum plate reinforced 2mm thick FRP main frame for added strength Special feature 6 Newly designed die-cast front and rear suspension arms, front axle, and wheel hubs Special feature 7 Transparent case protects the R/C mechanisms Special feature 8 Reinforced front uprights Special feature 9 Redesigned oil dampers Special feature 10 Detailed hard plastic body included Requires A 7.2 battery & charger Requires B 2-channel radio gear Requires C TS plastic model paint

Tamiya 58470 - 1/10 Holiday Buggy DT-02 Kit Holiday Buggy kommer nå på DT-02 chassis som har sin batteripakken legges på midten av “badekar” rammen og har utmerkede kjøreegenskaper selv på ujevnt underlag. Karosseri i støpt blå PE plast. Nødvendig tilbehør: 1 x servo Radio/Motaker Regulator (THW-1060-RTR) leveres på versjon 1 (Vår anbefaling til versjon 2  HW1060)  Batteri/Lader Plastlakk (TS-23) til taket om man vil ha dette i en annen farge enn støpt hvit Maling/Lakk til detaljer (Box art anbefaling XF-1 Sort Matt (TS-6), XF-2 Hvit Matt, XF-3 Gul Matt, XF-15, XF-62) For fullt kulelagring trenger du 14 stk 1150 lager (5x11x4mm) Eller en pakke fra Tamiya (54579) Se under relaterte produkter for anbefalt tilbehør: Length: 390mm. Image shows finished model.   Relive The Fun! The 2WD R/C off-road car Holiday Buggy made its debut in 1980 and attracted many R/C fans due to its sprightly handling characteristics. Now, Tamiya is proud to release the updated Holiday Buggy (2010), which comes mounted on the proven DT-02 chassis. It features a 4-wheel double wishbone suspension, and its simple, durable construction makes for easy assembly. The durable soft resin body features a pre-painted driver figure wearing a cowboy hat for enhanced realism. Fun-to-Drive DT-02 Chassis The bathtub type frame chassis features a longitudinal battery layout for lower center of gravity and optimum weight distribution. 4-wheel double wishbone suspension is equipped with coil spring damped units to provide superb off-road traction. A sealed gearbox protects against sand and debris and is equipped with differential gears to efficiently transmit the power from the type 380 motor. By installing separately available Type 540 motor and corresponding pinion gear, more powerful driving can be enjoyed. Specifications ●Length: 390mm, Width: 240mm, Height: 164mm ●Wheelbase: 260mm ●Ground Clearance: 26mm ●Weight: 1,250g ●Type 380 Motor Included ●Rear Wheel Drive 2WD ●Tire Width/Diameter: F=22/81mm, R=39/86mm　●Tread: F/R=217mm/208mm ●3-Bevel Differential Gear ●2-Piece Steering Tie-Rod ●F/R Double Wishbone Suspension ●Gear Ratio=15.77:1

Tamiya 58502 Blitzer Beetle 2011 Kit med THW1060 regulator Blitzer Beetle fra Tamiya, kit med lakkert hardplastkarosseri i sort. Nødvendig tilbehør: 1 x servo Batteri/Lader  Ønsket klarlakk for glans TS Enkel starterpakke med Radio/Motaker, Servo, 7.2V 2000mAh Nimh Batteri med enkel USB lader ( M-STYLE ) Anbefalt 12 stk 5x11x4 kulelager   Se under relaterte produkter for anbefalt tilbehør: This is a re-release version of the Blitzer Beetle R/C assembly kit, which was inspired by the exciting off-road desert racer designs seen in the United States.    Type Detail Scale 1/10 Construction type assembly kit Terrain use off-road Drive-train 2WD Drive type gearbox Drive line dog bone Differential type gear Suspension fully independent double wishbone Steering mechanism direct servo Shock damper oil-filled damper Shock damper material plastic Tire type rubber Tire tread pin spike Body material ABS Plastic Chassis material plastic Electronic Speed Control (ESC) included ESC model n/a LED Light buckets no LED lights no Motor 540-brushed type Bearings plastic bushing Adjustable camber yes Adjustable toe angles front only Adjustable ground clearance yes Adjustable gear ratio fixed Adjustable wheelbase fixed Adjustable track width fixed Adjustable shock angle fixed Special feature 1 1/10 scale R/C assembly kit Special feature 2   Special feature 3 The durable resin body is molded in white and comes with side mirror parts. The body may be painted with Tamiya's TS spray paints, which are formulated in synthetic lacquer for the best finish and durability Special feature 4 The tough, lightweight ABS bathtub chassis features a rear-mounted motor, rear-wheel drive layout Special feature 5 4-wheel independent double wishbone suspension is equipped with C.V.A. oil filled shock units and extremely durable monocoque-type lower arms Special feature 6 The front spiked tires feature three ribs for enhanced stability while the rear tires feature both spikes and an X-shaped tread pattern along the center to ensure high levels of grip Special feature 7 Fully-enclosed gearbox protects against dirt and debris Special feature 8 Driver figure included     Requires A 7.2 battery & charger Requires B 2-channel radio gear and ESC Requires C TS plastic model paint

Tamiya 58517 Super Hotshot 2012 Kit Nødvendig tilbehør: Radio/Motaker med  minst 2 kanaler Batteri/Lader (7.2V Nimh eller 2S Lipo Rund kasse batteri anbefales) lader etter valgt batteri eller vår anbefaling E680 og ladekabel Deans/T-Plugg Regulator (Kan anbefale denne HW1060  om du bruker batteri med T-plugg/Deans, Med Tamiyakontakt HW1060 Servo (Vår anbefaling HD-9001MG ) Ønsket lexanlakk PS Se under relaterte produkter for anbefalt tilbehør:   As Super As Ever Tamiya ga opprinnelig ut en spesialversjon av 4WD racingbuggyen Hotshot i 1986. Denne berømte maskinen er satt til å komme tilbake som Super Hotshot og har moderne forbedringer samtidig som den beholder den grunnleggende layouten til originalen. Karakteristiske ytre funksjoner som det stilige sølvfargede karosseriet og bakvingen, gule oljedempere og knastedekk med gullmetallbelagte felger har også blitt beholdt. Moderne oppdateringer i chassiset opprettholder de originale egenskapene til Super Shot, inkludert den slitesterke ABS monocoque-rammen, rullebur og underbeskytter. Samtidig minimerer kulelager friksjonstap ettersom kraften fra den horisontalt monterte motoren overføres til alle fire hjulene via drivaksler av dogbonestype. 4-hjuls dobbel bærearmsoppheng er utstyrt med oljedempere som tillater 3 justerbare fjærspenninger for å matche baneforholdene. I tillegg gir en GT-tunet motor (25T) rikelig med kraft for dynamisk terrengkjøring            The Super Shot, which was originally released in 1986 is now available again as the re-named Super Hotshot. Specifications Length: 390mm　 Width: 235mm　 Height: 150mm　 Weight: 1,330g (not including R/C unit, battery pack)　 Tread: 205mm (Front), 208mm (Rear)　 Tire Width/Diameter: 31/88mm (Front), 38/88mm (Rear)　 ABS Monocoque Chassis Frame　 Shaft-Driven 4WD　 F/R 3-Bevel Differentials　 2-Piece Steering Tie-Rod　 4-Wheel Double Wishbone Suspension　 Gear Ratio＝8.1:1 or 10.04:1　 GT-Tuned Motor (25T) ESC - Not Incuded Anbefalt lakk fra Tamiya PS-12 X-2 X-11 XF-1 XF-2 XF-15  

Tamiya 58546 1/12 Vanessas Lunch Box CW-01 Black Edition Kit Byggesett av Tamiya Vannesas Lunch Box du trenger i tillegg for å få komplett bil, radio/motaker/servo, batteri og lader. 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri Inkludert THW1060 regulator. Skal bilen brukes anbefales det å kulelagre den: 1150 x 9 stk 850 x 1 Komplett lagersett : 54997 This R/C assembly kit recreates a fun and boxy classic VAN with over-sized monster truck tires. It is one of Tamiya's classic creations from the 1980’s (First released in 1987). It has been a fan favorite for its original appearance as much as for its R/C performance. The boxy minivan body has been raised up over monster truck wheels to ensure that this R/C van will grab the attention wherever you choose to drive it.  2WD Chassis Mounted on Big 115mm Diameter Tires  The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swingarms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces. Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.  • 1/12 scale R/C model assembly kit. Length: 385mm, width: 290mm, height: 220mm.  • The legendary Lunch Box body is molded in red styrene for great realism.  • Comes with red color plated wheels.  • A new color variation of the classic stickers has white and blue stripes to go perfectly in the red theme!  • The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups.  • A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris.  • Features a rear wheelie bar for wild wheels-in-the-air driving.  • Includes 540-motor.  • Requires: 2-Channel Radio, servo,ESC, 7.2-7.4volt battery pack & compatible charger, and Tamiya TS paint. (If you decide to paint the body) SPECIFICATIONS Adjustable Gear Ratio Fixed Bearings Plastic bushing Body Material ABS Plastic Body Stickers Included Chassis Material ABS Plastic Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Motor Brushed 540 Type Requires A 2-channel radio, steering servo, 7.2volt battery & battery charger Scale 1/10 Shock Damper Friction type Suspension Independent front/solid axle rear Terrain Use Multi-Purpose Electric R/C Car Series no.546 1/12 R/C Lunch Box "Black Edition" Item No: 58546 Length: 385mm. Image shows painted and assembled model.   Back, and in Black The popular Lunchbox model from Tamiya's catalog makes a comeback in stylish black. This R/C assembly kit features the trademark boxy minivan body with metal-plated fenders, front grille and dampers, and includes a sticker set to add the finishing touches. All this is raised up over monster truck wheels cased in 115mm tires for a cool number that you can take for a spin any time, anywhere.   2WD Chassis Mounted on Big 115mm Diameter Tires The durable and easy-to-assemble 2WD chassis employs a box type frame, front swingarm independent and rear rolling rigid suspension. Big 115mm diameter semi-pneumatic tires on black wheels offer dynamic running on even the toughest of surfaces. The sealed gearbox protects diff gear from dirt and sand during off-road driving and a rear mounted wheelie bar enables wild wheels in the air stunt driving.   Specifications ●Length: 385mm, Width: 290mm, Height: 225mm ●Weight: 1,560g (not including R/C mechanism and battery) ●Wheelbase: 207mm ●Tread: 212mm (Front), 216mm (Rear) ●F/R Tire Width/Diameter: 71/115mm ●ABS Box Type Frame ●Rear-wheel 2WD ●Suspension: Independent Swingarm (Front), Rolling Rigid (Rear) ●F/R Friction Dampers ●3-Bevel Differentials ●Gear Ratio: 14.7:1 ●Type 540 Motor ●Requires an Electronic Speed Controller (sold separately)   Separately Required Items ●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger Information is current as of December 2012. Specifications are subject to change without notice.

Tamiya 58577 NovaFox 1/10 2WD Kit Nødvendig tilbehør: 1 x servo Radio/Motaker Batteri/Lader Ønsket lexanlakk PS Se under relaterte produkter for anbefalt tilbehør:   【 Back on the Track! 】　This is an update of a popular 2WD buggy model which was a stablemate of the famous Hotshot in the late 1980s. The elegant, slim polycarbonate body brings to mind the image of a full-size racing buggy, and its markings take inspiration from the original model. Jazzy gold color metal-plated wheels are fitted with front ribbed and rear oval block tires for excellent off-road performance. The model includes a driver figure to install in the cockpit.   【 Updated Rear-Wheel 2WD Off-Road Chassis 】　This classic model retains its highly dust-resistant monocoque frame and 4-wheel independent double suspension, while also receiving updates to make it suited to the modern R/C world. Dog-bone type drive shafts are added, as is a stabilizer to help neutralize roll. Sealed gearbox and rear uprights now include a total of 8 ball bearings as standard, providing even more effective power transmission.    The front of the model features monoshock front double-wishbone suspension and a stabilizer to reduce roll.    Rear suspension features 2 CVA dampers placed near-vertically. Also fitted with dog-bone type drive shafts as standard.    Slim and durable monocoque frame provides excellent protection for the R/C equipment contained inside.   【 Specifications 】　●Length: 425mm ●Height: 133mm ●Width: 225mm ●Weight: 1,140g (Not including R/C equipment and battery pack) ●Wheelbase: 260mm ●Tread: 198mm (Front), 183mm (Rear) ●Tire Width/Diameter: 23/83mm (Front), 38/88mm (Rear) ●ABS Resin Monocoque Frame ●Rear-Wheel 2WD ●3-Bevel Differentials ●4-Wheel Double Wishbone Suspension ●CVA Oil Dampers x3 (Front & Rear Total) ●Gear Ratio= 8.7:1, 7.25:1 ●Type 540 Motor ●Requires Electronic Speed Controller (sold separately) ※Cannot be used with Tamiya LF3700-6.6V Racing Pack (sold separately)   【 Separately Required Items 】　●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter      

Tamiya 58587 - NEO Fighter Buggy 2WD DT-03 Kit Nødvendig tilbehør: Radio/Motaker/Servo Batteri/Lader PS lakk til Lexan body Regulator (Vi kan anbefale denne HW1060) For full kulelager option trenger den 14 stk 5x11x4 lager (1150) alternativ 54579 16x5x11x4   Neo Fighter Buggy er montert på det ny utviklede DT-03 chassisplattformen. Dette chassiset er lett å montere og enkelt og vedlikeholde. DT-03 er ment som en lett-å–komme–i gang-modell for å oppmuntre unge sjåfører til å komme inn i RC verdenen. Den lar sin intuitive men tøffe utforming og problemfri montering en enkel og rimelig inngang til RC. Den gir mindre erfarne brukere muligheten til å ta fatt med R/C modell bil bygging og kjøring. Dette er ren glede. Neo Fighter Buggy (DT-03 Chassis) Item No: 58587 Length: 400mm. Image shows assembled and painted kit. 【 A Fighter, and a Winner! 】　The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers! 【 DT-03 Chassis: Great Fun, Minimum Fuss 】 The stylish slimline form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to friction dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering. Front suspension arms are attached at a 25-degree angle to improve off-road ability. Rear gearbox is sealed to protect from dust and dirt, and the built-in differential provides smooth cornering. Dust cover protects the model's R/C equipment from sand and dust, helping prevent running trouble. The sticker sheet includes logos used on the original Frog model, plus Neo Fighter Buggy logos. Paint the tough polycarbonate body and apply markings as you like to create your own cool racer! 【 Specifications 】　●Length: 400mm, Width: 248mm, Height: 132mm ●Wheelbase: 287mm ●Tread (Front/ Rear): 221mm/208mm ●Tire Width/Diameter: 27/80mm (Front), 41/86mm (Rear) ●Monocoque Frame ●Rear Wheel 2WD ●3-Bevel Differentials ●2-Piece Steering Tie-Rod ●Front & Rear Double Wishbone Suspension ●Gear Ratio = 9.28:1 ●Type 540 Motor ●Requires electronic speed controller (sold separately) 【 Separately Required Items 】　●2-Channel R/C Unit with Reciver　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter Information is correct as of February 18, 2014. Specifications are subject to change without notice.    

Tamiya 58611 - WR-02C Honda City Turbo 1/10 Kit Leveres med THW-1060 regulator med Tamiya batteri kontakt, fin starterpakke for Tamiya biler her med Radio/Motaker, 1 batteri med enkel USB lader og en servo. M-Style Nødvendig tilbehør: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Rundkassebatteri og Lader for valgt batteri A Funky Blast from the Past! Dette bygesettet er en komisk gjenskaping av racingversjonen av Hondas 1983-lansering i Japan – City Turbo. Det tøffe hardplastkarosseriet har skarp støping, og settet inkluderer en førerfigur med hjelm for å gi ekstra moro. Klistremerker følger med for å dekorere bilens karosseri og førerhjelmen. WR-02C-chassiset er nytt for denne modellen, og det kjører på dekk med asymmetriske venstre-høyre-mønster. The 58611 kit was reissued July 19th 2025, at 22.000 Yen. This RC model is an updated release of a Tamiya classic, which was released as "Willy"s Wheeler" back in 1983. It has returned upon a newly-overhauled variant of the WR-02 chassis. It is fitted with a Honda City Turbo body, which also includes a comical driver figure. WR-02C The WR-02 chassis features a 2WD drive-train with fully independent double wishbone suspension. The 185mm wheelbase WR-02C chassis utilizes a sturdy monocoque frame which encompasses and protects the gearbox, enhanced by side members. The gear differential unit housed inside the sealed gearbox receives its power from the centerline-mounted motor, and passes it on to the rear wheels. A longitudinal position for the battery pack contributes to the model's optimal weight distribution to ensure that when the City Turbo accelerates in a hurry, it performs a dynamic and thrilling wheelie, cushioned by the wheelie roller bar to ensure that the car doesn't topple over. The steering servo is also positioned along the centerline of the chassis, using a 2 tie-rod setup for straightforward handling. The model also features 4-wheel independent double wishbone suspension for a smooth ride. For ease of assembly, the gearbox and motor come pre-assembled. Tire Width/Diameter: 35/70mm (Front), 42/70mm (Rear) Resin Monocoque Frame Rear-Wheel 2WD 4-Wheel Double Wishbone Suspension Front/Rear Friction Dampers 2-Piece Steering Tie Rod 3-Bevel Differentials Gear Ratio: 16.5:1 Torque-Tuned Motor

Tamiya 58618 Monster Beetle 2015 Kit Monster Beetle 2015 fra Tamiya, kit med resin hardplastkarosseri i rødt. Nødvendig tilbehør: 1 x servo Radio/Motaker Batteri/Lader  Ønsket klarlakk for glans TS Inkludert Regulator THW-1060-RTR Se under relaterte produkter for anbefalt tilbehør: The Tamiya Monster Beetle was a classic R/C phenomenon from the 1980’s. After a long absence it is back as an updated assembly kit ready to traverse back yards across the country. The model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted with big tires for rough-and-tumble off-road fun. This updated version promises to be great fun for both beginners and Tamiya R/C kit veterans alike! Look Who's Back! This re-release version of the Monster Beetle assembly kit features a number of updates while keeping the basic layout of the original off-road car released in 1986. It features a realistic customized Beetle body depicted in tough polystyrene resin, with metal-plated parts supplied in the kit to add the finishing touch for handles and headlight frames. A resin driver figure is the icing on top of the cake! Tough Space Frame Chassis This hardy model's rear-wheel drive chassis is based around a durable ABS space frame to withstand all-action off-road driving. 4-wheel independent suspension uses CVA oil dampers, and has double wishbone front and trailing arm rear setups. Superlative cushioning and grip are provided by 130mm-diameter, 58mm-width lug pattern pin spike tires on flashy gold color plated wheels. Efficient and durable universal shafts come with rubber boots. Specifications ●Length: 410mm ●Width: 285mm ●Height: 240mm ●Wheelbase: 247mm ●Tread: 220mm (Front); 225mm (Rear) ●Tire Width/Diameter: 58mm/130mm ●ABS Resin Space Frame ●Rear-Wheel Drive ●3-Bevel Differential Gear ●2-Piece Steering Tie-Rod ●Suspension: Double Wishbone (Front); Trailing Arm (Rear) ●Oil Dampers ●Gear Ratio = 14.7:1 ●Type 540 Motor ●Electronic Speed Controller  Separately Required Items ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Tamiya 58633 Blackfoot 2016 Kit BlackFoot fra Tamiya, kit med støpt hardplastkarosseri i sort inkludert motor og regulator (ESC) Nødvendig tilbehør: 1 x servo Radio/Motaker Regulator (vår anbefaling HW1060) INKLUDERT THW1060 Batteri/Lader  Ønsket klarlakk for glans TS Se under relaterte produkter for anbefalt tilbehør:   This is a modern successor to the Blackfoot line of trucks. It features the classic body from the Blackfoot III kit and it is mounted on the chassis used in the Monster Beetle (2015) radio control model. The chassis is an all-action 2WD machine fitted with big tires for rough-and-tumble off-road fun. The Blackfoot R/C model is ideal for great fun for both beginners and Tamiya connoisseurs alike.   Product Specifications (Specifications subject to change) Type Detail Scale 1/10 Construction type Assembly kit Terrain use Multi-Purpose Drive-train 2WD Drive type Gearbox Drive line Dog bone Differential type Gear Suspension Independent suspension Steering mechanism Direct servo Shock damper Oil-filled damper Shock damper material Plastic Tire type Rubber Tire tread Lug/pin-spike Body material ABS Plastic Chassis material Plastic Electronic Speed Control (ESC) Included ESC model Not included LED Light buckets No LED lights No Motor 540-brushed type Bearings Plastic bushing Adjustable camber Fixed Adjustable toe angles Front only Adjustable ground clearance Fixed Adjustable gear ratio Yes Adjustable wheelbase Fixed Adjustable track width Fixed Adjustable shock angle Fixed Special feature 1 Length: 440mm, width: 290mm, height: 270mm. Special feature 2 The ABS resin Blackfoot III body has newly designed markings that carry on the theme of the original series of Blackfoot models. Special feature 3 Plastic driver figure is included. Special feature 4 The rugged ABS space frame chassis utilizes double-wishbone front and trailing arm rear suspension setups in tandem with CVA oil dampers. Special feature 5 Rear universal drive shafts come with rubber boots to protect them from dust. Special feature 6 A resin undercover protects the sealed gearbox at the rear of the model. Special feature 7 123mm semi-pneumatic lug pattern tires are paired with yellow 1-piece wheels. Requires A 2-channel radio gear Requires B 7.2 battery & charger Requires C TS plastic model paint    

Tamiya 58643 1/10 The Grasshopper II (2017) Kit Grasshopper II kit fra Tamiya, dette er relansert versjon fra 1988! Drev for bruk sammen med 540motor 18t 32P 0.8M Du trenger i tillegg. 1 x servo Radio/Motaker Batteri/Lader Lakk av TS type hvis man vil lakkere TS Klarlakk hvis man vil ha blank finish Se under relaterte produkter for anbefalt tilbehør:   The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model.   Product Specifications (Specifications subject to change) Type Detail Scale 1/10 Construction type Assembly kit Terrain use Off-Road Drive-train 2WD Drive type Gearbox Drive line Solid axle Differential type Gear Suspension Independent front/solid axle rear Steering mechanism Direct servo Shock damper Friction damper Shock damper material Plastic Tire type Rubber Tire tread Grooved front/pin spike rear Body material ABS Plastic Chassis material Plastic Electronic Speed Control (ESC) Included ESC model TBLE-02S LED Light buckets No LED lights No Motor 380-brushed type Bearings Plastic bushing Adjustable camber Fixed Adjustable toe angles Front only Adjustable ground clearance Fixed Adjustable gear ratio Fixed Adjustable wheelbase Fixed Adjustable track width Fixed Adjustable shock angle Fixed Special feature 1 Length: 400mm, width: 221mm, height: 139mm Special feature 2 The Grasshopper II body is molded in durable polystyrene resin, and has a driver figure for attachment. Special feature 3 Features a rugged ABS resin bathtub chassis. Special feature 4 Front swing axle and rear rolling rigid suspension setups are actuated by coil-sprung friction dampers. Special feature 5 Fully enclosed rear gearbox contains a differential gear to aid smooth cornering. Special feature 6 Front ribbed tires give great straight-ahead grip, and rear spike tires provide powerful drive. They are matched with 8-spoke one-piece lightweight wheels. Special feature 7 Compatible with tune-up parts such as standard Type 540 motors (requires nine 1150 ball bearings & one 850 ball bearing) and CVA mini oil dampers. Special feature 8 Includes Tamiya TBLE-02 S ESC (May be used for brushed and brushless motor applications) Requires A 2-channel radio gear Requires B 7.2 battery & charger Requires C TS plastic model paint

Tamiya 58650 1/10 Volkswagen Beetle Rally - MF-01X Kit (NO ESC) Nødvendig tilbehør: Radio/Motaker, Regulator, Batteri/Lader/Servo/PS- Lakk (Se relaterte produkter for vår anbefaling)   This R/C model assembly kit recreates the classic Volkswagen Beetle in rally racing form. Thanks to its superlative reliability and uncomplicated upkeep, it was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. The VW body sits atop Tamiya’s proven shaft-driven 4WD MF-01X chassis, which is at home on a range of surfaces from road to flat dirt. About the MF-01X: Power is transmitted from the rear mounted motor to the front wheels via a propeller shaft that runs down the side of the MF- 01X. Gearboxes are integrated into the monocoque for a sturdy and easy-to-assemble structure. The MF-01X has a three-section make-up; changing the central spacer section enables short (210mm), middle (225mm), and long (239mm) wheelbases. The Rallye Beetle uses the 239 mm wheelbase configuration.    Product Specifications (Specifications subject to change) Type Detail Scale 1/10 Construction type Assembly kit Terrain use On-Road Drive-train 4WD Drive type Gearbox Drive line Dog bone Differential type Gear Suspension Fully independent double wishbone Steering mechanism Direct servo Shock damper Friction damper Shock damper material Plastic Tire type Rubber Tire tread Radial Body material Polycarbonate Chassis material Plastic Electronic Speed Control (ESC) Not Included (Anbefaler HW1060) ESC model TBLE-02S LED Light buckets No LED lights No Motor 540-brushed type Bearings Plastic bushing Adjustable camber Fixed Adjustable toe angles Front only Adjustable ground clearance Yes Adjustable gear ratio Yes Adjustable wheelbase Yes Adjustable track width Fixed Adjustable shock angle Fixed Special feature 1 Length: 385mm, width: 178mm, height: 175mm Special feature 2 The Beetle body is expertly captured in lightweight, durable polycarbonate Special feature 3 Side mirrors are recreated using separately molded plastic parts Special feature 4 The 4WD MF-01X chassis has a rear mounted motor, and uses a prop shaft to transmit power to the front wheels. It features a robust, easy to maintain monocoque frame. It is at home on road and flat dirt surfaces Special feature 5 This model uses the L wheelbase (239mm). The chassis can be set up in S (210mm) and M (225mm) wheelbases using separately-sold propeller shafts Special feature 6 A range of option parts are available to hop up the MF-01X chassis, including lightweight, rigid aluminum propeller shafts Special feature 7 Includes a Tamiya TBLE-02S ESC and Torque Tuned motor. ESC features brushless motor mode for easy expandability Requires A 2-channel radio gear Requires B 7.2 battery & charger Requires C Polycarbonate paint

Tamiya 58654 - 1/10 Lancia 037 Rally TA02-S Kit Nødvendig tilbehør: Radio/Motaker Servo Batteri og Lader Lakk for Hardplast(TS)/Byggeverktøy Kjør en legende Lancia 037 Rally ble utviklet for Gruppe B-løp, og var en bakhjulsdrevet bil med racingspesifikasjoner for chassis, en 2-liters DOHC rekkefiremotor med kompressor på over 300 hk og et aggressivt karosseri designet av Pininfarina. Den slo konkurrentene av banen med en én-to-plassering i sesongåpningen av Monte Carlo Rally i 1983, og fortsatte i samme stil med seire i det 5., 6., 7. og 10. løpet, noe som ga den produsentmesterskapet. Fantastisk realisme og spennende drivkraft Dette er et fjernstyrt modellbyggesett som viser den dominerende Lancia 037 Rally-bilen som prydet rallyscenen i 1983. Det støpte karosseriet fanger den stilige 037 Rally-formen på en mesterlig måte med karakteristiske spoilere foran og bak. Separate deler viser vindusviskere, sidespeil og fire tåkelys foran; gjenskapinger av lysene bruker metallbelagte og klare linser for suveren realisme. Interiørdeler (med bilder av fører og medfører) er også inkludert, pluss klistremerker som viser sponsorlogoer. Det akseldrevne 4WD TA02-S-chassiset tilbyr god ytelse med uavhengig firehjulsoppheng med doble wishbone-armer, CVA-oljedempere, realistiske halvglansbelagte felger og semi-slick racingdekk. Spesifikasjoner ★Length: 422mm, Width: 186mm, Height: 132mm ★Wheelbase: 236mm ★Tread (Front & Rear): 152mm ★Tire Width/Diameter (Front & Rear): 27/65mm ★Bathtub-Type Frame ★Shaft-Driven 4WD ★3-Bevel Differential (Front), Ball Differential (Rear) ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★CVA Oil Shocks ★Gear Ratio = 8.59:1 ★Type 540 Motor ★ ESC (Regulator) Inkludert Lakk/maling anbefalt av Tamiya: TS-26 Pure White X-2 White X-6 Orange X-11 Chrome Silver X-18 Semi Gloss Black X-26 Clear Orange X-27 Clear Red XF-1 Flat Black XF-2 Flat White XF-7 Flat Red XF-8 Flat Blue XF-15 Flat Flesh XF-19 Sky Grey

Tamiya 58672 - Monster Beetle Trail GF-01TR Kit Nødvendig tilbehør:  Radio/Motaker Batteri/Lader Servo GF-01TR: Fantastisk framkommelighet ! Dette firehjulsdrevne chassiset er basert på en lett og tøff monocoque-ramme, med kraft levert av den sentralt plasserte motoren. Reduksjonsgir/Portaler på hver aksel reduserer drivakselrotasjonen for enormt trekkraft, god bakkeklaring og evnen til å takle tøft terreng. Girkassen er forseglet for å beskytte mot støv og rusk, og integrert i rammen; innebygde differensialgir gir utmerket trekkraft og holdbarhet ved bruk av inkludert differensialsparkel. Firehjuls dobbel wishbone-fjæring bruker friksjonsdempere, mens et todelt styrestag med servoen til venstre gir utmerket respons. Gule hjul er utstyrt med hybriddekk med spike- og traktor spikes mønster på 115 mm for overlegen demping og grep. Chassiset bruker et «firkantet» oppsett med lignende slitebane- og akselavstandslengder. Trail Beetle Dette byggesettet skaper et kjøretøy som tilbyr utmerket terrengkjøring. Støpt i detaljert ABS-plast, er det spreke karosseriet inspirert av spesialtilpassede Volkswagen Beetle, og har overdrevne skjermer, en forenklet bakende, trippel ekstralys og mer. Metallbelagte deler gjenskaper frontlykter, ekstralys og fremstilling av motoren. GF-01TR-chassiset gir en dynamisk terrengkjøring. Specifications ★Length: 333mm, Width: 270mm, Height: 215mm ★Wheelbase: 174mm　 ★Tread: 210mm (Front & Rear) ★Tire Width/Diameter: 68/115mm (Front & Rear) ★Monocoque Frame ★3-Bevel Differential Gears ★2-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★Gear Ratio = 37.35:1 (using kit standard 18T pinion gear) ★Type 540 Motor ★Electronic Speed Controller (ESC) is included ★Monster Beetle Trail tilbyr enormt grep som vil ta den over alle slags hindringer. ★Karosseriet er støpt i ABS-plast og byr på mange detaljer. Metallbelagte deler gir et ekstra lag med realisme. ★Fronten er utsmykket med trippel ekstralykter, som er metallbelagte deler med klistremerker for dekorasjon. ★Avbildninger av motor og lyddemper er også metallbelagte deler. Karosseriet har også en sporty veltebøyle. ★Bruk den medfølgende kitten i girdifferensialene for å gi denne modellen suverent grep. ★Alle hjul har navreduksjonsenheter, som reduserer drivakselens utgang for større dreiemoment. ★Chassiset har høyere bakkeklaring som ytterligere øker dens egenskaper i tøft terreng. ★Kjernen i GF-01TR-chassiset er en slank monocoque som også fungerer som girkasse. ★Ta en nærmere titt på det komplekse drivverket, vist her i denne profilvisningen av chassiset.

Tamiya 58687 Ford Escort Mk.II Rally 1/10 (Painted Body) (MF-01X KIT)   Nødvendig tilbehør: Radio/Motaker, Batteri/Lader/Servo/Regulator (Se relaterte produkter for vår anbefaling) Uten ESC. Kjør et ikon! Den ikoniske Escort ble produsert mellom 1968 og 2004 av Ford Europe. Mk.II ble produsert fra 1975 til 1980, en frontmotor, bakhjulsdrevet bil med ett klassisk karosseri. RS1800 ble utstyrt med en høyytelses DOHC 4-sylindret motor og ble grunnlaget for en vellykket rallybil forrallyteam som sikret produsent- og sjåførmesterskap i 1979. Nå er denne rallylegenden gjenskapt i et radiostyrt byggesett , med en lexankarosseri som nøyaktig fanger den tidløse stilen. Basert på det allsidige MF-01X-chassiset, vil det gi mye moro på både vei og rallyunderlag. Anbefales å sette inn kulelager om den skal brukes. Kulelagersett : 54643  (Alternativ løse lager 20 stk 1150 5x11x4 , 2 stk 5x8x2.5 , 2 stk Flenslager 5x8x2.5mm ★The iconic boxy form of this two-door legend is rendered artfully in polycarbonate, pre-painted white. ★Plenty of separately molded parts up the realism - spotlights, headlight cases, bumper and side mirrors. ★Here is a close-up on the side mirror design. Window sections come pre-painted in tinted Smoke (PS-31).   ★The square lines of the rear are artfully depicted, with the spoiler on the boot also captured. ★Eight-spoke light blue wheels are paired with 60mm-diameter, 26mm-width rally block tires for great grip. ★Why not employ the separately sold Tamiya LED Light Unit to add even more realism to your Escort Mk.II Rally?   MF-01X - Compact 4WD At Home on a Range of Surfaces Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and 8-spoke wheels are paired with rally block tires.   ★This chassis features highly capable 4-wheel independent double wishbone suspension, with friction dampers front and rear. ★A slimline three-piece monocoque forms the centerpiece of the MF-01X chassis, and the propeller shaft is positioned to the right. ★The motor is planted in the 4WD chassis' rear, with power going via gears to the rear wheels and propeller shaft to the front.   Specifications ★Length: 414mm, Width: 172mm, Height: 135mm ★Wheelbase: 239mm (L) ★Tire Width/Diameter (Front & Rear): 26/60mm ★Tread (Front & Rear): 138mm ★Monocoque Frame ★Shaft-Driven 4WD ★3-Bevel Differential Gears ★2-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front & Rear Friction Dampers ★Gear Ratio = 9.5:1 ★Type 540 Motor ★Electronic Speed Controller (sold separately)   Separately Required Items ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter Information is current as of February 12, 2021. Specifications are subject to change without notice.  

Tamiya 58695 - 1/10 Wild One RWD Off-Roader Blockhead Motors Kit KLASSIKER! Sett øynene på denne ferdiglakkerte versjonen av den klassiske Wild One Off-Roader, som er verket til Blockhead Motors' kreative drivkraft Jun Watanabe. Gitt en smakfull blå farge i kontrast til den røde og svarte fargeskalaen til originalen, er karosseriet ferdigmalt og kuttet, og kan utstyres med det medfølgende vindusnettet, skilt og til og med en dummy-antenne for det typiske retro utseende. Dedikerte klistremerker har Blockhead Motors-logoen blant mange flere for et travelt og stilig utseende. Kompatibel RWD Off-Road chassis! Modellens holdbare ramme av ABS-plast er matchet med et batterideksel som er kompatibelt med moderne batterier som Tamiya Racing Packs og LF-batterier.Firehjuls avhengig hjuloppheng er utstyrt med aluminiums oljedempere foran og bak, og frontdemperfestet er også av aluminium. Girkassedifferensialen gir jevne svinger og er plassert vekk fra sand og andre fremmedlegemer i en lukket girkasse; drivaksler med lavfriksjon av dogbones har støvmansjetter på leddene for ytterligere beskyttelse. Den sølvfargede veltebøylen har metallkomponenter, og sølvbelagte felger, opphengsarmer, sidevern og girkasse gir denne vognen en stilig finish. Nødvendig tilbehør: Radio/Motaker  Servo Regulator (ESC) Batteri og Lader Anbefalt tilbehør: Radio/Motaker med  minst 2 kanaler Batteri/Lader (7.2V Nimh eller 2S Lipo Rund kasse batteri) lader etter valgt batteri eller vår anbefaling E680 og ladekabel Deans/T-Plugg Regulator (Vår anbefaling HW1060) Servo (Vår anbefaling HD-9001MG ) Kulelager ( 10 stk 1150 5x11x4mm eller pakke med 16 stk 54579 ) + 3 stk 850 5x8x2.5mm Specifications ★Length: 425mm, width: 225mm, height: 140mm ★Wheelbase: 255mm　★Tread: 190mm (front & rear) ★ABS plastic box frame ★Polycarbonate body ★Rear motor, rear-wheel drive ★3-bevel differential ★2-piece steering tie-rod ★Single trailing arm suspension (front & rear) ★Tire width/diameter: 23/83mm (front), 38/38mm (rear) ★Aluminum oil dampers (front & rear) ★Gear ratio = 7.54:1, 9.05:1 ★Type 540 motor ★Electronic speed controller (ESC) is sold separately.       ★With a wide and low stance to offer great off-road performance, the buggy features a rear motor, rear-wheel drive setup. ★The durable box frame is molded in ABS plastic, and is compatible with Tamiya 7.2V Racing Packs and LF battery packs. ★This image gives a closer look at the trailing arm front suspension, with aluminum cylinder oil dampers for a great ride.   ★Silver color metal-plated wheels give a stylish accent, and at the front they are paired with ribbed tires for excellent directionality. ★Metal-plated parts are also used for the sealed rear gearbox, which contains a differential gear to give smooth cornering. ★Note the metal-plated arm on the rear trailing arm suspension setup, with aluminum cylinder oil dampers just like on the front.   ★Dogbone design drive shafts are highly durable, particularly with dust boots attached to offer extra protection when going off-road. ★Wider rear wheels are also metal-plated components, and are shod with hybrid oval block/spike pattern tires to ensure great grip. ★Window nets are a nice touch, bringing to mind a full-size racer. The polycarbonate driver figure also comes pre-painted.   ★Car number boards at the rear are finished with a base yellow sticker and then your desired number stickers on top. Customize! ★Check out our PR video for the model on our YouTube channel!    

Tamiya 58696 1/10 Super Avante (TD4) Et supernytt ansikt! Dette byggesettet skaper Super Avante, en 4WD buggy som er tildelt Tamiyas legendariske Avante-navn. Den har en eksepsjonelt lav profildesign muliggjort delvis av dens fremre innvendig fjæring, med en akseldrevet 4WD-drivlinje drevet av en midtstillt motor og har kuledifferensialer både foran og bak og leveres fullt kulelagret. Dens futuristiske karosseridesign er laget av Kota Nezu ved znug design, og har mange klare seksjoner som bare bidrar til Super Avantes utpreget moderne stemning, det samme gjør cockpit-bakstøtten og de fire miniskjermene.  Nødvendig tilbehør: Radio/Motaker, regulator, batteri lader og lexan lakk. Electric R/C Car Series no.696 1/10 R/C Super Avante (TD4) Item No: 58696 Length: 387mm. Image shows painted and assembled kit.   A Super New Face This R/C model assembly kit creates the Super Avante, a 4WD off-road buggy that is bestowed with Tamiya's legendary Avante name. It features an exceptionally low profile design enabled in part by its front inboard suspension, with a shaft-driven 4WD drivetrain powered by a midship motor and employing front/rear ball differentials plus full ball bearings. Its futuristic body design is the work of Kota Nezu at znug design, and features numerous clear sections that just add to the Super Avante's distinctly modern mood, as do the cockpit-rear buttress and the four mini fenders.     ★Take a separate look at the pioneering, futuristic design (the work of Kota Nezu at znug design) from the rear of the model, too! ★Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders. ★This is a close-up on the driver figure included in the kit, who is ready to take the wheel and give your buggy a realistic look.   ★A further glance inside the cockpit shows stickers for display elements. Clear parts are used in three other locations across the car. ★All four wheels have an individual mini-fender; they are both practical (helping to block flying debris) and provide a unique design element. ★Buttresses are a trendy aerodynamic item at present, and the Super Avante is endowed with its own polycarbonate design, a separate part.   ★Left: Two different wing stay designs (high and low) are included in the kit, to help you tweak the car's downforce. ★Right: Vibrant yellow star dish design wheels are paired with high grip square spike tires for superior off-roading.   TD4 - Low Profile, High Performance The TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance. The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment. Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.   ★The shaft-driven 4WD chassis makes a major contribution to the model's low profile, and is a highly slimline deisgn to boot. ★Take a closer look at the front double-wishbone setup with lower "H" arms, and turnbuckle upper arms that allow easy camber tweaks. ★Rocker arms and push-rods are used to actuate the front inboard CVA oil dampers, which are near-horizontal (10 degrees) in their position.   ★The TD4 chassis has its motor in a midship position, and ducts are worked into the design to ensure that it is cooled as much as possible. ★This picture is a close-up on the TD4's propeller shaft, which runs along the side of the chassis to provide the front wheels with power. ★Both front and rear gearboxes are sealed, and contain one of these - a ball differential. Steel joints contribute to the model's durability.   ★Left: Like the front, the rear double wishbone suspension utilizes upper turnbuckle shaft and rear "H" arms. ★Right: Access to the battery pack is provided by the front suspension, which springs up dynamically.   Specifications ★Length: 387mm, width: 246mm, height: 117mm (with low wing stays employed) ★Wheelbase: 283mm　★Tread: 214mm (front), 205mm (rear) ★Plastic bathtub frame ★Shaft-driven 4WD ★Front & rear ball differentials ★3-piece steering tie-rod ★4- wheel double wishbone suspension ★Tire width/diameter: 32/82mm (front), 41/82mm (rear) ★CVA oil dampers ★Gear Ratio = 10.71:1 ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of August 7, 2021. Specifications are subject to change without notice.

Tamiya 58697 - 1/10 Astute 2022 TD2 Kit Nødvendig tilbehør: 1 x servo (må være lavprofil servo) Kan anbefale denne DS8570 Radio/Motaker Batteri/Lader Ønsket lexanlakk PS Motor og Regulator(ESC) Virkelig fantastisk! Denne 2WD R/C offroad-byggy byggesettet arver navnet sitt fra Tamiya 2WD modell «Astute» fra 1980-tallet. Det lavprofilerte, slanke karosseriet er designet av Kota Nezu fra znug design. Modellen har en førerfigur i cockpiten og individuelle små skjermer foran/bak. To typer (høy/lav) vingestag er inkludert for å justere nedtrykket. Astute 2022 er basert på et monocoque-rammechassis med midskipsmotor og batteripakke plassert bakover, og bruker ribbede dekk foran og firkantede pigger bak. TD2 er et bakhjulsdrevet buggychassis som bruker innvendig frontfjæring for slank, lavprofilform, og en monocoque-ramme med optimal plassering av R/C-utstyr. Den har en tverrgående motor midtskips og tverrgående batteripakke plassert bak. Den forseglede girkassen har en innebygd kuledifferensial for å begrense slipp, og 4-hjuls uavhengig dobbel wishbone-fjæring bruker CVA-oljedempere. Strammeskruer for bruk som overarmer forenkler justering av cambervinkel. Forhjulsopphenget har en glidevinkel på 25 grader og vinklede dempere for jevn ytelse. Ribbede firkantede piggdekk foran og bak gir stabilitet og godt grep. Forhjulene er festet med sekskantnav. Spesifikasjoner : Lengde: 387 mm, bredde: 246 mm, høyde: 125 mm (med lave vingestag) ★ Akselavstand: 284 mm ★ Mønster: 215 mm (foran), 205 mm (bak) ★ Plastramme for badekar ★ Bakhjulsdrift ★ Kuledifferensial ★ 3-delt styrestag ★ 4-hjuls dobbel wishbone-fjæring ★ Dekkbredde/diameter: 27/79 mm (foran), 41/82 mm (bak) ★ CVA-oljedempere ★ Girforhold = 10,71:1 ★ Fulle kulelagre ★ Type 540-motor og elektronisk hastighetskontroller (ESC) selges separat. Separat nødvendige varer ★Motor type 540 ★2-kanals fjernstyrt system med ESC ★R6/AA/UM3-batterier for sender ★Batteripakke og lader ★Take a look at the Astute 2022 body from another angle, drinking in the honed form with splayed rear, designed by Kota Nezu. ★The TD2 layout has the motor installed midships, while the battery pack in a position toward the rear to aid with traction. ★A hi-torque servo saver comes included as standard, and helps actuate the steering via a three-piece tie-rod setup. ★Smooth front inboard suspension has suspension arms with a 25-degree skid angle and CVA oil dampers at a similar gradient. ★Upper "I" and lower "H" arms are employed in the front suspension. Turnbuckle shaft upper arms allow swift adjustment of camber. ★Black star dish design wheels are paired with sturdy hex hub nuts and front ribbed tires for superior directionality. ★The motor is attached in a transverse position to the rear of the battery pack, providing power to a drivetrain with 3 gears. ★A ball differential is housed in the sealed gearbox. Steel joint cups secure the durability needed for a demanding off-road drive. ★CVA oil dampers have red springs in keeping with the livery theme of the stylish Astute 2022. ★The rear suspension setup features a combination of lower "H" arms and upper turnbuckle shafts. ★At the rear, black star dish wheels are used in combination with square spike tires to give the model plenty of bite. ★Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders. ★The cockpit is a particular highlight, with an aircraft-inspired canopy and a driver figure installed inside for superb realism. ★Two different wing stay designs (high and low) are included in the kit, to help you tweak the car's downforce. This image shows low types. Front polycarbonate mini-fenders are screw-attached to their upright. Blue sections are taken care of with stickers. If you like, side pontoon front sections can be left unpainted to provide a window into the car's inner workings!

Tamiya 58706 - Thunder Shot 2022 Re-Released 1/10 4WD Kit Svært tiltalende re-realeaset modell fra Tamiya Dette byggesettet er en gjenutgitt og oppdatert versjon av Thunder Shot, hvor originalen først ble utgitt i 1987. Den har ett stilig karosseri støpt i polykarbonat, som er ferdigkuttet og ferdigmalt i hvitt og blå, med en gjennomsiktig canopy. En valgfri bakvinge er også inkludert for å la deg finjustere Thunder Shot (2022), også ferdigmalt og ferdigkuttet. Akseldrevet 4WD Med et motoroppsett midtskips og akseldrevet 4WD-oppsett, er chassiset basert rundt en lett og stiv ABS-plastramme som oppbevarer R/C-utstyr internt og har girkasseenheter med intern differensial foran og bak som har fjæringen festet til seg. Den firehjuls doble bærearmsfjæringen har øvre "I" og nedre "H"-armer og har en enkelt CVA-oljedemper foran, med et par dempere bak, pluss en frontstabilisator: Resultatet er en jevn, flytende kjøring. Andre viktige funksjoner inkluderer et motorfeste i aluminium, pluss grippy piggdekk på alle fire hjul. Option : 17stk x 1150 (5x11x4mm Kulelager)  4 stk x 850  (5x8x2.5mm Kulelager) Nødvendig tilbehør:  Radio/motaker  Regulator (ESC) Vi kan anbefale HW Quicrun 1060 Drivbatteri (rundkasse) og Lader til dette Thunder Shot (2022) Item No: 58706 Length: 390mm. Image shows painted and assembled kit.   Highly Appealing This R/C model assembly kit is a re-released and updated version of Thunder Shot, the original of which was first released in 1987. It features a stylish body molded in polycarbonate, which is pre-cut and pre-painted in white and blue, with a transparent canopy. An optional rear wing is also included to let you fine-tune the Thunder Shot (2022), also pre-painted and pre-cut.   Smooth Shaft-Driven 4WD With a midship motor layout and shaft-driven 4WD setup, the chassis is based around a lightweight and rigid ABS plastic frame that stows R/C equipment internally and features gearbox units with internal differential front and rear that have the suspension attached to them. That four-wheel double wishbone suspension features upper "I" and lower "H" arms and packs a single CVA oil damper at the front, with a pair at the rear, plus a front stabilizer: the result is a smooth, flowing drive. Other features of note include an aluminum motor mount, plus grippy spike tires on all four corners.   ★The compact, futuristic body is molded in lightweight and durable polycarbonate. ★Sturdy and easy to work on, the chassis has an ergonomic design based around an ABS bathtub. ★The front double-wishbone suspension employs upper "I" and lower "H" arms.   ★A front monoshock setup sees the CVA oil damper laid on its side. The stabilizer helps supress roll. ★An aluminum motor mount not only keeps the motor securely attached, it also acts as a heat sink. ★The rear of the chassis also uses double-wishbone suspension, with a pair of CVA oil dampers.   ★One-piece dish wheels will attract less mud, and are paired with semi-pneumatic spike tires. ★A polycarbonate cover helps minimize debris getting into the chassis, and even features a driver figure! ★A separate rear wing is also included for optional attachment to the Thunder Shot (2022).   Specifications ★Length: 390mm, width: 240mm, height: 135mm ★Wheelbase: 260mm ★Ground clearance: 23mm ★Tread: 203mm (front), 194mm (rear) ★Tire width/diameter: 38/83mm (front/rear) ★Bathtub type frame ★Shaft-driven 4WD ★Front/rear 3-bevel differentials ★3-piece steering tie-rod ★Front/rear independent double wishbone suspension ★Gear ratio = 7.68:1 ★Type 540 motor ★Electronic speed controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of April 21, 2022. Specifications are subject to change without notice.

Tamiya 58710 -  Hotshot II Blockhead Motors KIT Nødvendig tilbehør: 1 x servo  Regulator (ESC) Radio/Motaker Batteri/Lader Ønsket lexanlakk PS   Customized Hotshot II The Hotshot II debuted in 1987, a follow up to the Hotshot, our wildly popular first-ever shaft driven 4WD buggy. Now, the Hotshot II makes a re-appearance with various tweaks added by the famous Japanese designer Mr. Jun Watanabe. It features an overhauled color scheme of brilliant blue (body and wing are pre-painted in this color, and pre-cut), with a prominent white stripe. The driver figure position has also been reevaluated, while the upper deck and roll cage are new components, bringing the driver up to a more realistic location. Guards and car number plates were also designed by Watanabe, while the motor has a dedicated sticker.   Shaft Driven 4WD Chassis Based upon the original Hotshot II design, this shaft driven 4WD chassis has sealed gearboxes and differentials front and rear and gives an intuitive drive. The front of the four-wheel double wishbone suspension employs a monoshock setup, with two dampers at the rear (all are CVA oil dampers molded in yellow), while metal plated parts such as uprights and wheels give the model a realistic look. The latter are shod with hybrid oval block/pin spike low-profile tires.   ★The model viewed from behind, complete with the rear guide designed by Watanabe. ★Matte plated front uprights give the model a classy accent. ★The front monoshock CVA oil damper is molded in yellow and joined by a stabilizer.   ★The driver figure has a slightly raised position, and is surrounded by a roll cage with window netting. ★Crafted in metal, the roof-top includes an air intake, while guard plates are installed to the front and rear of the cockpit. ★Car number plates add another customized touch to this model.   ★Rear uprights have a matte plated finish. ★CVA oil dampers are used on the rear, their tension being adjustable via spacers. ★Matte plated wheels are paired with semi-pneumatic hybrid tread tires.   ★This kit also includes a polycarbonate rear wing, with lots of stickers to decorate it.   Specifications ★Length: 390 mm, width: 235 mm, height: 150 mm ★Weight: 1,285 g ★Tread: 205 mm (front), 200 mm (rear) ★Tire width/diameter: 31/88 mm (front), 38/88 mm (rear) ★ABS monocoque ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel double wishbone suspension ★Gear ratio = 8.70:1 ★Type 540 motor (with dedicated sticker) ★Electronic speed controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of February 2, 2023. Specifications are subject to change without notice.

Tamiya 58714 Volkswagen Golf II GTI 16V Rally 1/10 (MF-01X KIT)  Nødvendig tilbehør: Radio/Motaker, Regulator (ESC) Batteri/Lader/Servo/PS- Lakk (Se relaterte produkter for vår anbefaling) Nok ett ikon fra Tamiya! (Bilde viser ferdigmontert og lakkert bil) Golf er en av Volkswagens mest ikoniske biler. Fra den første opptredenen i 1974 har Volkswagen Golf fortsatt å utvikle og lede den verdensomspennende kompaktbilklassen, samtidig som den deltar aktivt i motorsport. Andregenerasjonsmodellen - resultatet av et fullstendig modellskifte i 1983 - hadde en GTi-sportsmodell med en 1781cc inline-4-motor. Dette byggesettet etterligner den bilen som møtte suksess i globale rallyløp i 1986 og ble mester i sin klasse. Den har et lett og slitesterkt karosseri i polykarbonat (lexan), sammen med MF-01X-chassiset som har ett akseldrevet 4WD chassis gjør den anvendelig til en flott kjøretur på vei og flatt grusunderlag. 1980 -tallet var tiåret som det ble populært igjen med såkalte hatch back ! En av de mange bilprodusentene som gjorde hatchbacks populære var Volkswagen, og deres MK2 GTI 16V var en favoritt blant mange bilfans. Tamiya har gjenskapt MK2 GTI som en rally -bil som sett i A7 - klasse.    ★The classic lines of the Golf II are rendered artfully by the polycarbonate body. ★Headlight cases and spotlights are separately molded parts that are compatible with separately sold LED light unit. ★Dedicated parts recreate the distinctive side mirrors, and stickers are used for the mirror surfaces.   ★Left: Taillight cases are separate parts, and can be combined with separately sold LED light unit. The bumper is also a separate component. ★Right: Dish wheels are paired with rally block tires.   MF-01X - Compact 4WD At Home on a Range of Surfaces Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and 8-spoke wheels are paired with rally block tires.   ★Left: A close-up on the double wishbone front suspension. Uprights and hub carriers are off-road spec. ★Right: A slimline three-piece monocoque forms the centerpiece of the MF-01X chassis, and the propeller shaft is positioned to the right.   ★Left: The motor is planted in the 4WD chassis' rear, with power going via gears to the rear wheels and propeller shaft to the front. ★Right: This image shows the double wishbone rear suspension with its coil sprung dampers.   Specifications ★Length: 397mm, width: 170mm, height: 142mm ★Wheelbase: 239mm (L) ★Tire width/diameter (front & rear): 26/60mm ★Tread (front & rear): 138mm ★Monocoque frame ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel double wishbone suspension ★Front & rear friction dampers ★Gear ratio = 9.5:1 ★Type 540 motor ★Electronic Speed Controller (sold separately)   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of August 29, 2023. Specifications are subject to change without notice.  

Tamiya 58719 - BB01 BBX 2WD 1/10 Offroad Buggy Kit  BBX er en ny off-road buggy på det splitter nye BB-01 chassiet fra Tamiya. Karosseriet er designet av Atsushi Arino i 1980-talls stil og kommer med matchende retro hjul. Kommer som byggesett. Nødvendig tilbehør: Radio-Motaker Servo 4.8 -9.8kg (Lavprofil) Regulator (ESC) Vi kan anbefale denne ( HW1060 ) Motor  Batteri og egnet lader for batteri, kan bruke både Nimh eller 2S Lipo/Liion PS Lakk for Lexankarosseriet X-XF maling for detaljer og sjåfør Det anbefales å sette inn kulelagere. Om modellen BBX er Tamiyas nyeste bakhjulsdrevne buggy, en nydelig modell inspirert av Stateside enseters racingbuggyer i full størrelse. Den er basert på det realistiske BB-01-chassiset, som har et chassis med flat underside, montert ett rullebur, ramme og oppheng; batteripakken er i langsgående posisjon, og motoren er plassert helt bakerst, noe som gir den trekkraften til hjulene en hjelpende hånd. Den forseglede girkassen inneholder en kuledifferensial, mens fire aluminium oljedempere sørger for eksemplarisk ytelse og fjæring. Tamiyas designere valgte fremre doble bærearm (A-armer, 25-graders hjul) og bakre trailingarm justerbart oppsett for fjæringen, og det stilige karosseriet er delt opp i seks biter for montering på rørburet.  Lengde:    414mm Høyde :    136mm Bredde :   233mm Hjulbase:  283mm     ★Take a look at the chassis without the body fitted, showing off the highly realistic roll cage. ★Plated wheels are a hex hub design, and are paired with front ribbed and rear square spike tires. ★Front double-wishbone suspension uses A arms with 25 degrees of caster, and cushioned by oil dampers.   ★The motor is positioned at the rear of the BB-01 chassis. Rear trailing arm suspension alignment is adjustable. ★The battery pack is located along the chassis centerline. Remove the nose cowl and stopper pin to access it. ★A busy and realistic cockpit area features a driver figure, light pods and safety nets.   ★Left: Remove the rear roll cage screws and it swings up to give access to the motor. ★Right: The BB-01 chassis offers great suspension stroke and tread, making it the perfect off road partner.   ★Left: A flat underbelly helps minimize problems with rough off road surfaces. ★Right: Why not buy a separately sold spare tire and fit it on the rear when you're not driving the BBX? Information is current as of May 15, 2023. Specifications are subject to change without notice.

Tamiya 58723 1/10 Fiat 131 Abarth Rally Olio Fiat - MF-01X Kit Nødvendig tilbehør: Radio/Motaker, Regulator, Batteri/Lader/Servo/PS- Lakk (Se relaterte produkter for vår anbefaling eller kontakt oss på post@rc-shop.no) Rallystjerne fra 70-tallet Fiat 131 Abarth Rally debuterte i globale rallyløp i 1976 og ble mester tre ganger. Basert på den populære Fiat-familiebilen 131 Mirafiori, ble rallyversjonen tilpasset av Abarth og i 1976 og 1977 kjørte den hovedsakelig i fargen til Fiat-oljemerket Olio Fiat: dette byggesettet skaper en R/C-modell av den bilen. Den forlokkende formen til bilen gjenskapes ved hjelp av et karosseri i polykarbonat/lexan, med separate deler for firedoble frontlykter, ekstralykter og bakrutespoiler.   ★Denne klassiske rallybilen passer perfekt til det svært kapable MF-01X-chassiset. ★Et nærbilde foran på bilen, som har separate deler for frontlykter og ekstralykter. ★Sidespeil er også separate plastdeler, mens førernavn er inkludert på klistremerkearket.   ★ Venstre: Den støtfangerløse bakdelen er et punkt av interesse, og bagasjelokkspoileren er en separat støpt komponent. ★Til høyre: Her ser du nærmere på takspoileren, som også er støpt separat fra karosseriet.   ★Venstre: De tykke overskjermene er et viktig element til bilens image, og luftinntaksdekselet er også avbildet. ★Høyre: Dish-hjulene er sammenkoblet med rallyblokkdekk med en diameter på 60 mm og en bredde på 26 mm.   MF-01X - Kompakt 4WD hjemme på en rekke overflater Basert rundt en tøff monocoque-ramme med integrerte differensialer gir dette kompakte 4WD-chassiset en spennende kjøretur enten du tar den på vei eller flate jordoverflater. Den har en bakmontert motor, med differensialdrevene hjul og en mellomaksel som overfører driv til fronten. Både fremre og bakre differensial har differensialgir. Batteripakkens plassering i chassissenteret sikrer utmerket balanse, mens 4-hjuls uavhengig dobbel bærearmfjæring bruker friksjonsdempere. Offroad-kompatible M-05Ra-karosseristolper og svingaremer er også inkludert, leveres med dishfelger sammen med med rallyblokkdekk.   ★Venstre: Motoren er plassert bak på 4WD-chassiset, med kraft som går via differensialer til hjulene og mellomaksel overfører kraften til foran. ★Høyre: En slank tredelt monocoque utgjør midtpunktet i MF-01X-chassiset, og mellomakselen er plassert til høyre.   ★ Venstre: Et nærbilde av den doble bærearmsfjæringen foran. C-Huber og svingarmer er off-road-spesifikasjoner. ★Høyre: Dette bildet viser den doble bærearmsfjæringen med spiralfjærende dempere.   Spesifikasjoner ★ Lengde: 400 mm, bredde: 180 mm, høyde: 132 mm ★ Akselavstand: 239 mm (L) ★ Dekkbredde/diameter (foran og bak): 26/60 mm ★Senter på hjul (foran og bak): 138 mm ★ Monocoque-ramme ★ Akseldrevet 4WD ★3-bevel differensialgir ★2-delt styrestag ★4-hjuls dobbelt bærearmfjæring ★Front og bak friksjonsdempere ★Girforhold = 9,5:1 ★Type 540 motor Torque Tuned   Nødvendige tilbehør ★2-kanals R/C-system m/ESC ★Batteripakke og lader★Elektronisk hastighetskontroller (selges separat) Informasjon er gjeldende per 4. desember 2023. Spesifikasjoner kan endres uten varsel.  

Tamiya 58725 - 1/10  Squash Van GF-02 Kit  Tamiya lanserer her en ny terrengbil med store dekk. Navnet er Squash Van, og den er satt opp med et nytt girdrevet 4WD GF-02-chassis. Mens GF-01-chassiset har en komisk design, har GF-02-chassiset en mer realistisk akselavstand og en ramme med stige/rør konstruksjon. Dette byggesettet er inspirert av amerikanske panelvans fra 1950-tallet, og har en utmerkete egenskaper selv på gress eller ujevne overflater. Det girdrevne 4WD GF-02-chassiset har motoren i en lav, sentral posisjon i den lette, slitesterke monocoque-rammen, og overfører kraften foran og bak via drev. Den kan også settes opp for 4 hjuls styring med en ekstra servo og radio med 4WS program. Om du vil kulelager hele bilen har den 32stk 1150 (Pakke med 16stk 54579)(Løse lager (12156) og 2 stk 850 (12160) Pump opp de gode tidene! Dettebyggesettet er inspirert av amerikanske varebiler fra 1950-tallet. Den stilige karosseriet med avrundet panser, unik dekkhusform og lave frontlys- og grillposisjoner er støpt i lett og slitesterk polykarbonat. Klistremerker har design som squash-illustrasjoner, navnelogo og triple pin-striper i gull, svart og blått. Det girdrevne 4WD GF-02-chassiset bruker 4-hjuls dobbel bærearmsfjæring utstyrt med friksjonsdempere, og er utstyrt med dekk med en diameter på 123 mm, noe som sikrer kraftig ytelse på jordunderlag og terreng.   ★Vil retrostilingene til Squash Van fange oppmerksomheten din? ★ Et nærbilde av modellens front. ★ Svulmende fendere fremhever karosseriet sider, og klistremerker er inkludert for logoer og mer.   ★Dørhåndtak, nøkkelhull, bakre støtfanger og mer er gjenskapt av klistremerker. ★Hvite, dype felger og 123 mm dekk avrunder modellen, og sørger for at den er riktig hjemme i terrenget.     GF-02-chassis Det girdrevne 4WD GF-02-chassiset har motoren i en lav, sentral posisjon i den lette, slitesterke monocoque-rammen, og overfører kraft til front og bak via drev. Den lange akselavstanden og brede slitebanen sørger for stabil terrengytelse. Den slanke rammen er inspirert av stige/røroppsett og har integrerte forseglede girkasser som hjelper til med å holde steiner ute. Girdifferensialer foran og bak tillater jevn svinging, mens tannhjulsgir som selges separat tilbyr et valg mellom tre typer girutvekslinger, og et motorvern øker påliteligheten i terrenget. Den 4-hjuls doble bærearmsopphenget har fire friksjonsdempere, og styreleddet bruker identiske lengde styrestag. Dype felger i ett stykke er sammenkoblet med 123 mm halvpneumatiske dekk med stor diameter.   ★ GF-02-chassiets lange akselavstand og brede slitebane gir den suveren stabilitet. ★ Motoren er i en sentral posisjon, og kraften overføres via drev. Differensialer er installert foran og bak. ★ Styreservoen er installert på venstre side av chassiset, og er sammenkoblet med styrestag av samme lengde.   ★ Et nærbilde på frontfjæringen med dobbel bærearm med spiralfjærende dempere. ★ Baksiden er også et oppsett med dobbel bærearm. Skruehull for en annen servo (for 4WS-oppsett) er i chassiset.     Spesifikasjoner ★ Lengde: 454 mm, bredde: 280 mm, høyde: 238 mm ★ Akselavstand: 267 mm ★ Dekkbredde/diameter: 60/123 mm (foran og bak) ★ Slitebanen: 222 mm (foran og bak) ★ Monocoque-chassis med integrerte girkasser ★ Gear- 4WD ★3-fas differensialer ★2-delt styrestag ★4-hjuls uavhengig dobbelt bærearmfjæring ★Friksjonsdempere ★Girforhold = 18,03:1 ★Type 540 motor   Separat nødvendige elementer ★2-kanals R/C-system m/Servo ★Batteripakke og lader★Elektronisk hastighetsregulator (ESC) selges separat.   4-hjulsstyring (4WS) Sett sammen fjæringen igjen og bruk en separat solgt 4WS-radiosender, for 4-hjulsstyring og manøvrerbarheten og strammere svingsirkler som medfører. Informasjon er gjeldende per 4. desember 2023. Spesifikasjoner kan endres uten varsel.

Tamiya 58737 -  Hotshot II 2024 KIT  Nødvendig tilbehør: 1 x servo  Regulator (ESC) Radio/Motaker Batteri/Lader Dette byggesettet er en gjenutgitt og oppdatert versjon av 4WD-buggyen Hotshot II, hvor originalen først ble utgitt i 1987. Det slanke, smarte karosseriet og bakvingen er i tillegg av polykarbonat og ferdiglakkert svart. Klistremerker er inkludert for å påføre kraftige oransje og gule markeringer. Slitesterk 4WD Buggy-chassis Hotshot II har et akseldrevet 4WD-chassis med forseglede girkasser foran og bak for å holde skitt og sand ute; hver har en differensial på innsiden for jevn svinging, mens undersiden av modellen er beskyttet av underbeskytteren. Dens 4-hjuls uavhengige doble bærearmsfjæring har tre CVA-oljedempere - en foran og to bak, med en frontstabilisator som hjelper til med å få mest mulig ut av 4-hjulsdriften. Hvite tallerkendesignhjul er parret med semi-pneumatiske ovale blokkdekk for eksemplarisk grep på tøffe terrengoverflater. Specifications ★Length: 390mm width: 235mm, height: 160mm ★Wheelbase: 265mm ★Tire width/diameter: 31/88mm (front); 38/88mm (rear) ★Tread: 205mm (front); 200mm (rear) ★ABS monocoque frame ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel independent double wishbone suspension ★CVA oil dampers ★Selectable gear ratio = 10.04:1, 8.70:1, 8.16:1, 7.68:1 ★Type 540 motor ★Electronic speed controller (ESC) is sold separately. Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger The Hotshot II wedge body design is a classic! Red front upright parts really catch the eye. The front monoshock suspension uses a single CVA oil damper, which artfully keeps chassis roll in check. The metal roof has an integrated air intake, while a driver figure is included to use in the cockpit. The rear uses H-shaped arms top and bottom. Dog bone drive shafts are a reliable design. Each rear wheel has a CVA oil damper, which help the Hotshot II pick its way across challenging off-road surfaces. Dish wheels are of a different width front and rear, each with its own size of oval block tire. Like the body, the rear wing is pre-painted black polycarbonate, pre-cut for your convenience!  

Tamiya 58741 - DT-04 Fighter Next Gen 1/10 Kit DT-chassiset og dens Fighter Buggy-modeller har stor popularitet rundt om i verden, og har utviklet seg gjennom flere forskjellige modeller. Den har utviklet seg fra første utgivelse som  er Fighter Buggy RX på DT-01-chassiset, Super Fighter G på DT-02, Neo Fighter Buggy på DT-03, og nå på Next Gen Fighter-DT-04-chassiset.. Karosseriet er inspirert av enseter i full størrelse, og har separate karosseripaneler skrufestet til rammen. En førerfigur følger også med. DT-04-chassis –  Livlig RWD-ytelse. (Rear wheel drive) Dette er et bakhjulsdrevet buggy-chassis som tilbyr enkel montering og er en leken og livlig bil. Den har en «inline» batteripakkeposisjon, og en bakmontert motor for å gi bakhjulene rikelig med trekkraft. Den forseglede girkassen har en innebygd girdifferensial for jevn svinging og hjelper til med å holde støv og skitt ute. To akselavstander kan velges: 265 mm for vekt på raske svinger og lekenhet eller 280 mm for vekt på stabilitet. 4-hjuls uavhengig dobbel bærearmfjæring med lange armer bruker CVA oljedempere. Skrensvinkelen foran er 22,5 grader for å sikre både kontrollerbarhet og kraftig ytelse. Den har 3-delte styrestag som gir følelse av ekte styring. Her har chassiset ribbede dekk foran, og gripende firkantede pigg bak. Det følger også med 2 forskjellige decalsett i kitet, slik at forskjellige farge kombinasjoner er mulig. (Rødt og Blått dekalsett) Maling/Lakk Tamiya anbefaler: TS-87 Titanium Gold X-18 Semi Gloss Black XF-2 Flat White XF-8 Flat Blue XF-15 Flat Flesh 540 motor & Hobbywing ESC medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere (25T) NiMH eller LiPO batteri (round case) (Ved valg av batteri med annen kontakt enn Tamiya kan adapter1 eller  adapter2 brukes) Batterilader Det anbefales å montere kulelager for mindre friksjon, denne trenger følgende lagersett 22092 som består av: 10 x 1150 kulelagre (alternativ løse 12156, pakke med 2 stk 4611 pakke med 16stk 54579 4 x 1050 kulelagre  (alternativ løse 12155 , pakke med 2 stk gummitettet 5115 ) 4 x 850 kulelagre    (alternativ løse 12160 )   ●Lengde: 395 mm (med 265 mm akselavstand), bredde: 245 mm, høyde: 125 mm ● Akselavstand: 265 mm/280 mm ● Hjulbredde (foran/bak): 217 mm/204 mm ●Dekkbredde/diameter: 27/80 mm (foran) 41/86 (Bak) ●Singleskrog ramme ● Bakhjulstrekk ●3 Drevs differensial ●3-delt styrestag ●Doble bærearmer foran og bak med CVA oljedempere ●Girforhold = 9,28:1 ●Børste 540 Motor ●HW ESC inkludert The Fighter NXGEN form is inspired by full size single-seater buggies. Long arms in the front double wishbone suspension help the Fighter NXGEN take on undulations. Turnbuckle shafts in the steering linkage allow easy fine-tuning. CVA oil dampers help absorb big shocks, translating into a great drive. Dish design wheels are paired with ribbed front tires. The motor is situated at the rear, helping with rear traction. The back of the buggy also uses double wishbone suspension with CVA oil dampers. Rear star dish wheels are paired with grippy square spike tires. Reassemble the front section (arms, etc.) to switch between two different wheelbases (long and short). The skid angle on the front bumper helps the model take on off-road surfaces. The body is made up of seven molded plastic panels, for the roof, sides and more, screw-attached to the frame. This driver is ready to accompany you on your R/C adventures! The battery is positioned centrally in the plastic bathtub frame. Access the battery pack by lifting up the roll cage and removing the driver figure. Choose between red and blue color schemes.

Tamiya 58742 1/10 Hornet 2024 EVO Kit Hornet EVO med lexan karosseri, byggesett  fra Tamiya, du trenger i tillegg. 1 x servo Radio/Motaker Batteri/Lader PS- Lakk i ønsket farge (Box Art = PS-5) X-XF maling for figuren Verktøy for montering og saks for klipping av karosseri   Se under relaterte produkter for anbefalt tilbehør:  Dette byggesettet er en oppdatert versjon av The Hornet, hvor originalen først ble utgitt i 1984. Den beholder i stor grad den originale badekarrammen og parer den med 4-hjuls uavhengig dobbel bærearmfjæring og oljedempere, mens den forseglede bakre girkassen (som i DT-02) gir utmerket støvtett beskyttelse med en innebygd differensial med 3-bevel dreving. Tredelte felger og ribbedekk foran og bak kraftige knastedekk, og ett lett og slitesterk lexankarosseri kan dekoreres med de medfølgende klistremerkene, som har blitt frisket opp i anledning The Hornets 40-årsdag. Hornet EVO. bruker et lett, ypperlig balansert badekarchassis med 4 hjuls uavhengig fjæring som nytt, her er det også god plass i badekarchassiset til motaker og regulator som ligger over den innebygde batterikassen i nedre del av chassis. Dens nye 4-hjuls uavhengige doble bærearmsoppheng bruker øvre I-armer og nedre H-armer foran og bak, med CVA-oljedempere som sørger for jevn bevegelse. Justerbare  øvre turnbuckels sikrer at du kan justere camberen for å møte dine behov. Motoren er montert bak i en forseglet girkasse, og metall drivaksler med dogbone design gir et ekstra lag med pålitelighet, kitet leveres med alle nødvendige kulelager som sikrer effektiv kjøring. Spesifikasjoner : ★ Lengde: 430 mm, ★ Bredde: 230 mm, ★ Høyde: 135 mm ★ Akselavstand: 251 mm ★ Vekt (ikke inkludert R/C-utstyr og batteripakke): 1 075 g ★ Bakhjulsdrift ★ 4-hjuls dobbel bærearmsoppheng med CVA oljedemper ★ Dekkbredde/diameter: 81 mm (foran) ★ Type 540 motor ★ Girforhold = 9,28:1 (med sett 17T pinion) ★ Fullt kulelageret ★ ESC inkludert  Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger   This model inherits that timeless Hornet single-seater buggy form. R/C equipment and battery pack are stowed in the sturdy bathtub frame. The front double wishbone suspension has turnbuckle upper arms for camber adjustment, and CVA oil dampers that give a great ride. Like the front suspension, the rear also employs CVA oil dampers and upper turnbuckle arms. Dog bone type drive shafts are used. Front three-piece wheels are paired with ribbed tires. The rear also uses three-piece wheels, but with grippy spike tires. The slim ABS plastic bathtub frame has the battery mounted low, and accessible from the stopper-fixed battery hatch. Upgraded flame logos give the Hornet a fresh twist, and the number 40 refers to the fortieth anniversary of this R/C legend. A driver figure is also included. Two types of wheel hub are in the box, letting you attach various types of Hop-Up Option wheels and tires.

Tamiya 58946 - Fast Attack Vehicle 2011 Nødvendig tilbehør:  Radio/Motaker Batteri/Lader Servo Maling/Lakk til figur og eventuell klarlakk til det sandfargede chassiet Verktøy til bygging Fast Attack Vehicle ble opprinnelig lansert i 1984, og var en fjernstyrt buggy som gjenskapte utseendet og følelsen til en spesiell type militærkjøretøy. Den hadde et realistisk karosseri og veltebur og ga overlegen terrengytelse. Dette er nyutgivelsen av Fast Attack fjernstyrte bilen. INKLUDERER: Fast Attack byggesett, 540-motor, THW1060 ESC, 15T piniongdrev, Hjelmkledd førerfigur, klistremerkeark, dekk, felger og instruksjoner Specs and Features 1/10 scale R/C assembly kit. Includes 1150 (5x11mm) ball bearings. Note: First re-release production only Durable resin body and roll cage are mounted on ABS resin bathtub type chassis. Semi-pneumatic grooved front tires and rear tires with block pattern tread. Soldier figure and M60 machine gun included. Front and rear independent suspension Fully-enclosed gearbox protects against dirt and debris. Includes Tamiya THW1060 electronic speed control unit (ESC) Includes Johnson/Mabuchi 540-J brushed motor SPECS:    Length: 16.9" (430mm)           Width:   8.7" (220mm)           Height:  5.9" (150mm)           Weight: 2.64lbs (1200g)

Tamiya 47304 1/10 Fighting Buggy (2014) Kit  Fighter Buggy. Kommer som byggesett. Karosseriet komme i blå støpt ABS **Please note that this product was formerly released as Item 84389. The specifications remain the same.** Tilbake etter stor etterspørsel! Tamiya er glad for å ønske Fighting Buggy velkommen tilbake til produktserien med denne utgivelsesversjonen av R/C buggy-klassikeren fra 1982. Den beholder de unike opphengs- og drivoppsettene som ble brukt på den opprinnelige modellen, og parer dem med et nydesignet chassis. ABS - Karosseriet holder formen og designtemaet fra forgjengeren, og fremhever det med oppdaterte markeringer. Den er utstyrt med en takvinge i aluminium og sidenett for et autentisk buggy-look. Fartskontroller og 540 motor medfølger. Må kompletteres med: Radio og mottaker Regulator/ESC Servo NiMH eller LiPO batteri Batterilader Anbefales: Kulelagre:12stk 1150 (5x11x4), 2stk 850 (5x8x2.5) A Highly Satisfying Off-Road Experience The original 2mm-thick FRP and duralumin chassis plate is replaced with a new 2.5mm-thick FRP plate, finished in black like the 1.5mm-thick mechanism deck. The model can be powered by the separately sold Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size), which will fit neatly underneath the mechanism deck. Afficionados of the original model will note that the die cast arms remain the same on the 2014 version, while the separate reserve tank is still used on the rear suspension, which otherwise receives a number of new parts. A sealed direct drive gear case also houses the motor and protects it from dust and dirt. Stability is provided by ribbed front tires, and the rear gives excellent grip thanks to tires with tread patterns that extend to the sidewalls. 3-piece wheels are used both front and rear.   Front double trailing arm independent suspension employs tough die-cast metal arms sprung and fitted with aluminum oil dampers. The rear monoshock setup utilizes a striking setup which features a separate oil reserve tank connected to the damper via tubing. The separately sold Tamiya LF Battery LF1100-6.6V Racing Pack (M-Size) can be fitted snugly in the area underneath the upper deck. Specifications ●Length: 410mm, Width: 230mm, Height: 160mm　●Wheelbase: 250mm　●Tread: 165mm (Front), 180mm (Rear)　●FRP Double Deck Chassis Frame ●Rear Wheel Direct Drive 2WD　●2-Piece Steering Tie-Rod ●Front Suspension: Double Trailing Arm,　Rear Suspension: Swing Axle & Transverse Monoshock ●Tire Width/Diameter: 21/73mm (Front), 49/86mm (Rear) ●Aluminum Oil Dampers　●Full Ball Bearings ●Gear Ratio=10:1 or 6.5:1 ●Type 540 Motor included ●Requires Electronic Speed Controller (ESC) (sold separately)   Separately Required Items ●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter Information is current as of August 7, 2015. Specifications are subject to change without notice.

Tamiya 58441 - Buggy Champ (2009), Rough Rider Kit Re-Re relase av en av de største storselgere som Tamiya lanserte tilbake i 1979. Nødvendig tilbehør: Radio/Motaker Regulator, vi anbefaler denne *regulatoren som kommer med Tamiya kontakt Servo bør ha mellom 6-12kg Batteri/Lader, vi kan anbefale dette **batteriet (500608097) om du ikke bruker en kort lipopakke TS Lakk til karosseri og X-XF penselmaling til sjåfør og detaljer. ** OBS batteriet kommer med Tamiya kontakt, om du ikke lodder om kan denne overgangen brukes sammen med regulatorer med T-Plugg type kontakt og batteri. Den fremtredende figuren til R/C-bilboomen var Buggy Champ som først ble utgitt i 1979. Tamiya er nå stolt over å gi ut Buggy Champ på nytt for å feire bilens 30-årsjubileum. Chassiset har blitt finjustert samtidig som de originale egenskapene til chassiset har beholdt, som de unike doble bakarmene foran og torsjonsopphenget bak. R/C-fansens hjerter vil definitivt rase når de ser den nostalgiske formen og gjenopplever den dynamiske ytelsen til denne maskinen . This is a 1/10 R/C assembly kit. Length: 400mm-Full ball bearings. 540 motor included. Comes loaded with many top quality parts for improved performance such as:   A duralumin plate reinforced 2mm thick FRP main frame. Die-cast front and rear suspension arms, front axle, and wheel hubs have been newlydesigned for this re-release. Clear transparent waterproof case protects the R/C mechanisms. Reinforced front uprights. Redesigned oil dampers. Comes in the same original blister pack style packaging. White plastic easy-to-paint body included. Requires TS paints Can be used with separately available LF1100-6.6V Racing Pack (Item 55105) which is specifically made for this machine.

Tamiya 58518 - Super Clod Buster 2012 Kit  Denne monstertrucken har ett amerikansk pickup-lignende ABS karosseri som gir den et realistisk Monstertruck utseende. Frontgrill, luftinntak og veltebøyle er laget med metallbelagte deler. Super Clod Buster har en tomotors dobbel girkasse 4WD-drivlinje, slitesterke lenkearmer, 8 spiralfjærer og massive 165 mm dia. dekk for kraftig og effektiv kjøring for å overkomme ethvert hinder. Vil du nyte monstertruck-kjøring? Super Clod Buster er laget for deg! Behøves utenom som ikke er inkludert: 2-kanals fjernkontroll og mottaker Batteripakke: 7,2V Ni-Mh eller en 7.4V Lipo pakke (Round case) med Tamiya-kontakt eller Overgang (ikke inkludert) ESC – Twin Fartsregulator (Kan anbefale denne) WP 880 Dual Styreservo minimum 18kg (kan anbefale disse) 1812MG , LW-25MG , LW-30MG, HV WH-40kg_MG Superlim, ZAP PT02 Lakk/maling til Karosseriet Spesifikasjoner: Byggesett Chassis type: Vintage Skala: 1/10 Lengde: 48 cm Bredde: 38 cm Høyde: 34 cm Terreng: Off-Road Drift: 4WD firehjulsdrift Batteripakke: 7,2V Ni-Mh eller en 7.4V Lipo pakke (Round case) med Tamiya-kontakt (ikke inkludert) Motor: 2stk. 540 Børstemotor (inkludert) Body: ABS-plast Lakk/maling anbefalt av Tamiya: TS-38 Gun Metal TS-50 Mica Blue X-2 White X-6 Orange X-11 Chrome Silver Two motors and 4WS system The Super Clod Buster is equipped with two motors and tightly sealed gearboxes that have been molded as one piece with axle housing. Minimum power loss and smooth cornering are obtained thanks to a gear train transmission and differentials. A switch allows you to choose between powerful and economy mode, and the model is also equipped with a 4WS system for 4-wheel drive steering. Specifications ★Total length: 480mm ★Total width: 380mm ★Total height: 340mm. ★Chassis Material: ABS ★Chassis Shape: Bathtub Type ★Suspension: Front and Rear Trailing Arm ★Transmission Type: Twin-motor dual gearbox 4WD drive train ★Includes two Type 540 motors. ★Tire Diameter F/R: Both 165mm  

Tamiya 58525 - 1/10 Wild One RWD Off-Road Racer Kit  Varenr: 58525 Lengde: 425mm. Bilder viser montert og malt modell. Anbefalt tilbehør: Radio/Motaker med  minst 2 kanaler Batteri/Lader (7.2V Nimh eller 2S Lipo Rund kasse batteri) lader etter valgt batteri eller vår anbefaling E680 og ladekabel Deans/T-Plugg Regulator (Vår anbefaling HW1060) Servo (Vår anbefaling HD-9001MG ) Kulelager ( 10 stk 1150 5x11x4mm eller pakke med 16 stk 54579 ) + 3 stk 850 5x8x2.5mm Lakk PS (BOXART) (RE)BORN TO BE WILD Dette er en gjenutgitt versjon av Wild One 58050, den klassiske Tamiya 2WD RC buggyen som opprinnelig ble utgitt i 1985. Et veltebur og frontlykter bidrar til å gi denne buggyen en skalarealistisk tilstedeværelse. Karosseriet og taket er laget av slitesterk, lett polykarbonat og en førerfigur er inkludert for å live opp cockpiten. Ribbede frontdekk gir retningskontroll, og bakdekkene har et blokkmønster for høyt grep, slik at du kan nyte dynamisk terrengkjøring.   Chassisegenskaper Slitesterk lettvekts ABS-ramme matches med et batterideksel som er kompatibelt med moderne strømkilder som Tamiya Racing Packs og LF-batterier. 4-hjuls uavhengig fjæring er utstyrt med aluminium oljedempere og bakarmer og en bred slitebane sikrer utmerket terrengstabilitet. Den lukkede girkassen beskytter mot skitt og rusk og er utstyrt med en differensial for jevn svingkjøring. I tillegg har drivaksler skjøter av hundeben og støvdeksler for å sikre suveren beskyttelse.   Spesifikasjoner ●Lengde: 425 mm ● Høyde: 140 mm ● Bredde: 225 mm ● Akselavstand: 255 mm ● Slitebane (F/R): 190 mm ● Dekkbredde/diameter: 23/83 mm (foran), 38/88 mm (bak) ●ABS-rammechassis Hus i polykarbonat ●Bakmotor, bakhjulsdrift ●3-bevel differensial ●F/R Enkel hengende armfjæring ●F/R aluminiumoljedempere ●Girforhold＝1:7.54, 1:9.05 ●Type 540-motor   Separat nødvendige deler ●2-kanals R/C-system med ESC ●Batteripakke og lader ●Batterier for sender●Krever en elektronisk hastighetskontroller (selges separat) ) Informasjonen er oppdatert fra og med 12. juli 2012. Spesifikasjoner kan endres uten varsel.

Tamiya 58686 1/10 R/C VQS (2020) Kit  AWAY! Dette byggesettet er en oppdatert re-lease versjon av en buggy fra 1988 fra Tamiya-katalogen, som er arvet fra den legendariske raseorienterte Avante. Den fremovervendte cockpiten-og den bakre vingen-er støpt i lett polykarbonat/lexan og ferdig malt svart, ferdigskåret med hull til karosserimonteringen for å spare på forberedelser. Det brukes en monokoque ramme i ABS-plast, med responsiv akseldrevet 4WD pluss et trippel differensialoppsett, firehjulsdobbelt hjuloppheng for mye mer-suveren terrengkjøring venter! Kulelagre:2stk 620 (2x6x2.5), 2stk 830 (3x8x3), 4stk 850 (5x8x2.5), 10stk 1150 (5x11x4), 1stk 1150 (5x11x4)  Thrust Bearing,  4stk 1680 (8x16x5) Capable Off-Road Chassis This model's durable ABS plastic monocoque frame protects vital R/C equipment and boosts suspension performance with its excellent rigidity. A total of three differentials are employed: small front and rear planetary gear differentials, and a center differential with ball thrust bearing; front and rear gearboxes also have maintenance hatches. Universal shafts front and rear ensure smooth, efficient drive and minimal worry about parts coming loose due to bumps and shocks, while the Avante-based 4-wheel double wishbone suspension employs plastic lower arms with threaded shaft upper arms that allow swift adjustment of camber. Front uprights are aluminum, and stabilizers are included for the front and rear.   ★The front double wishbone suspension employs aluminum uprights, while universal drive shafts are used front and rear. ★This image is a close-up on the three-piece steering tie rod setup. The center plate is crafted in 2mm carbon fiber. ★Reponsive shaft-driven 4WD is powered by a longitudinally-placed motor, with a ball differential in the drive gear.   ★Sealed gearboxes front and rear house compact planetary gear differentials which utilize the Avante design. ★The rear suspension setup features long, ball-mounted lower arms. Threaded upper arms (front and rear) allow adjustment of camber. ★The monocoque bathtub frame is a lightweight, durable design that protects and allows easy access to R/C equipment.   ★Left: Battery changes are made from the underside. The model is compatible with Tamiya 7.2V Racing Pack and LF2200-6.6V battery packs. ★Right: Lightweight 6-spoke wheels are paired with pin spike tires. Front wheels are narrow, and rear wheels are wide designs.   Specifications ★Length: 435mm, Width: 235mm, Height: 150mm ★Wheelbase: 275mm ★Tread: 200mm (Front & Rear) ★ABS Plastic Monocoque Frame ★Shaft-Driven 4WD ★Front & Rear Planetary Differential Gears, Center Ball Differential ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double-Wishbone Suspension ★Tire Width/Diameter: 31/88mm (Front), 38/88mm (Rear) ★CVA Oil Dampers ★Gear Ratio = 8.73:1 (using kit-standard 21T pinion gear) ★Type 540 Motor ★Electronic Speed Controller (ESC) is incl   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of November 25, 2020. Specifications are subject to change without notice.

Tamiya 47461 TA02 1/10 Opel Calibra V6 1994 DTM Kit (limited edition) Du trenger i tillegg for å få komplett bil, radio/motaker/servo, batteri og lader, lexan lakk. Opel Calibra V6. Kommer som byggesett. TBLE-04S fartskontroller og 540 motor medfølger. Må kompletteres med: Radio og mottaker Servo NiMH eller LiPO batteri (må være round corner) Batterilader PS lakk Anbefales: Kulelagre: 2stk 1510 (10x15x4), 12stk 1150 (5x11x4), 6stk 850 (5x8x2.5), 2stk 1260 (6x12x4) Informasjon på engelsk: This is a R/C recreation of the Opel Calibra V6 that took part in the 1994 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing, the car was powered by a 2.5-liter V6 engine and piloted among others by former Formula One champion Keke Rosberg. The Limited-Edition kit is an exact re-release of the original as it appeared in the mid-1990’s. TA-02 Chassis: The proven TA02 bath-tub chassis provides shaft-driven 4WD. 4-wheel double wishbone suspension is fitted with CVA oil dampers. Enclosed front and rear gear cases have built-in diff gears, with a ball differential in the rear. • 1/10 scale R/C model assembly kit. Length: 448mm, width: 185mm, height: 131mm. Wheelbase: 260mm. • Polycarbonate body, with separate parts recreating the side mirrors, wiper arms and rear wing. • The model utilizes the shaft-driven 4WD TA02 chassis, which is based around a durable bathtub frame. • Openable gearboxes house a front 3-bevel gear differential and rear ball differential. • The TA02 features 4-wheel double wishbone suspension and CVA shock-dampers for smooth, responsive handling. • White mesh type wheels are paired with slick tires. • Included in the kit are two big sticker sheets to recreate the various sponsors and other markings, plus masking stickers for use in the paint process. • Includes 540-brushed type motor. • Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. • Requires: 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger, and Tamiya PS polycarbonate paint for the body. NOTE: Battery pack must have the round stick pack form factor. Square shaped Li-Ion batteries do not fit the battery compartment.