Tamiya_AMT_Italieri_Airfix Lime/bygg

Tamiya 14011 - 1981 Honda CR250R Elsinore Motocrosser 1/12 A global best-seller The 1981 release of the Honda CR250R holds the claim to fame of being the first production motocrosser with a liquid-cooled engine. Not only that, it was lucky enough to inherit the majority of its design from the RC250M, which triumphed in the 1980 All Japan Motocross Championship. This design of course featured the 246cc liquid-cooled powerplant, plus Honda's Pro-Link progressive rear suspension system. The combination of power and smooth movement made it a satisfying ride for the numerous riders worldwide that plumped for the CR250R. About the Model ★This is a 1/12 scale plastic model assembly kit of the 1981 Honda CR250R motocrosser. Length:180mm, width: 72mm, height: 104mm. ★The realistically-recreated liquid-cooled engine features depictions of cables and pipes. ★Honda's unique Pro-Link suspension is captured with élan, including a metal coil spring. ★Solid rubber front and rear tires feature a typical motocross knobby tread pattern. ★Decals are included to recreate the markings on the bike including logos. ★Comes with a stand.

Tamiya 14018 - 1981 Honda CR450R Motocrosser v/Rider 1/12 Motorbike length: 177mm. Image shows assembled and painted kit. We have lift-off! Honda released the 1981 production bike model of the CR450R to compete in 500cc class motocross races. Its 431cc air-cooled 2-stroke engine was a single cylinder unit and at the time had the highest output on offer among Honda production motocross models at 51.5hp. The semi-double cradle frame used Honda's own Pro-Link rear suspension. However, it wasn't just about power- a dry weight of just 104kg complemented the engine and made the lightweight CR450R the choice of many 500cc motocross racers across the world. The 1983 model received a 472cc engine and evolved into the CR480R. About the Model ★This is a 1/12 scale plastic model assembly kit of the Honda CR450R motocrosser. Length: 177mm, width: 77mm, height: 102mm. ★The tall, slimline form of the bike is masterfully captured. ★Honda's Pro-Link rear suspension is accurately recreated, and employs a metal spring. ★Synthetic rubber tires employ a realistic block pattern. ★Comes with a figure depicting a motocross rider in jumping pose, and the bike can be depicted in mid-air using the included stand .

Tamiya 14023 - 1983 Honda MVX250F 1/12   Length: 168mm. Image shows assembled and painted kit.  Built for Speed The MVX250F was Honda's 1983 contribution to the 250cc class of bikes, and it had plenty of high-performance company from other manufacturers. Built for speed, it featured a 2-stroke liquid-cooled V3 powerplant that had a maximum output of 40hp, and used a relatively small 16-inch front tire, as well as a racing spec silencer, on a no-frills frame. It was also equipped with inboard disc brakes and Honda's very own Pro-Link rear suspension. About the Model ★This is a 1/12 scale plastic model assembly kit of the Honda MVX250F. ★Length: 168mm, width: 76mm, height: 96mm. ★The powerful 90-degree V3 engine is recreated in fine detail. Vinyl tubing is used to authentically capture throttle, clutch and ignition cords among others. ★The sharp styling of the body cowlings is succinctly captured by the model. ★Realistic synthetic rubber tires. Optional side and lower cowlings are also included.

Tamiya 14044 - 1984 Yamaha XV1000 Virago 1/12 Image shows finished model. Length: 187mm, Width: 74mm, Height: 109mm After researching the distinctive style of American motorcycles, Yamaha proudly released the XZ1000 Virago in 1984. Features of the Virago along with its teardrop shaped fuel tank and gorgeous double seat, now come accurately reproduced as a plastic assembly model kit. The 981cc V-Twin engine and its cooling fins have been precisely remodeled. In addition, included in the kit are approximately 60 metal plated pieces to depict parts such as the crank case, fender, and exhaust provide the model with an exquisite finish. Both the large diameter front tire and small diameter wide rear tire are depicted with solid rubber and feature a realistic tread pattern.

Tamiya 14066 - 1979 Honda CB750 CUSTOM 1/12 The Honda CB750F, well known for the pronoun 750, now comes as a plastic assembly model kit with various special parts of the motorcycle including the flowing form of the tank, seat, and fairings accurately remodeled. The air-cooled 4-cylinder engine along with its cooling fins, oil cooler, and exhaust are precisely reproduced and create an impressive display of the CB750F. The racy aura of the CB750F can be seen through the specially designed dry clutch cover and in particular the crank case cover which was produced to improve its overall leaning angle. Also, detailed parts such as the bar type handles and rectangular shape mirrors have been changed to allow you to enjoy the custom mood of the 750. Length: 183mm, Height: 108mm.

Tamiya 14070 - 1996 Honda CBR1100XX Super Blackbird 1/12 1/12 Motorcycle Series no.70 Honda CBR1100XX Super Blackbird Item No: 14070 Length: 181mm. Image shows assembled and painted model. Capable of hitting speeds in excess of 300km/h is the 1996 released super sports Honda CBR1100XX, which now comes accurately reproduced as a plastic assembly model kit. ★The individualistic aerodynamic form of the CBR's cowling and the high performance liquid-cooled inline 4-cylinder engine, frame, and suspension, have all been precisely modeled. ★The engine and cowling can be attached to the frame with small screws allowing you to further understand the mechanics of the motorcycle. ★Parts such as the dual headlight case, exhaust, and front forks are depicted with metal plated parts to provide the model with greater realism. Specifications are subject to change without notice.

Tamiya 14073 - 1997 Yamaha YZF-R1 1/12 Length: 169mm. Image shows assembled and painted kit. Making its debut at the 1997 Milan Motor Show was the Yamaha super sports YZF-R1, which was developed to be the fastest machine on winding roads. ★The compact design of the YZF-R1 as well as its sharp lines which include the cowlings and fuel tank are accurately reproduced as a plastic assembly model kit. ★The liquid-cooled 4-cylinder engine has been precisely rendered and features fine details such as cables that are depicted with vinyl tubing. ★The frame and swing bars come with a metal plated finish and an interchangeable single seat cowl and racing stand are also included with the kit. Specifications are subject to change without notice.

Tamiya 14090 - 1/12 1998 Suzuki Hayabusa 1300 (GSX1300R) I 1998 var Suzuki Hayabusa 1300 (GSX1300R) en stor sensasjon under debuten på «INTERMOTO 98»-messen i Tyskland. Hayabusa er utstyrt med en 175 hk rekkemotor med fire sylindre og fire DOHC-ventiler, vannkjølt. For å sikre god luftstrøm til luftkanalen ble det tatt i bruk et unikt motordekseldesign med vertikalt plasserte doble frontlykter. Hayabusa oppnår også rask og kraftig akselerasjon og utfører utmerket svinging samt effektiv bremsing. For både erfarne og gjennomsnittlige førere har den banebrytende Suzuki Hayabusa 1300 vist seg å være førervennlig, og utviklet rundt konseptet «den ultimate sportssykkelen» fortsetter den å glede førere over hele verden. Om modellen 1/12 skala, total lengde: 178 mm, total bredde: 71 mm. Fra sin unike form til motoren, gjengir denne modellen nøyaktig den virkelige Hayabusa. Deler som øvre motordeksel og tank er støpt i ett stykke. For motor, motordeksel og svingarmer brukes skruer for pålitelig feste til rammen. Metalliske klistremerker brukes for å øke realismen til forgaffelen. Dekkene er laget av ekte gummi. Send tilbakemelding

Tamiya 14113 - 1/12 Honda RC166 GP Racer Kit 【 6-sylindret legende】 　 Hondas legendariske racersykkel, RC166, ble utviklet for å vinne verdensmesterskapet i landeveisritt i 1966. Sykkelen hadde en 250cc 4-takts 6-sylindret DOHC 4-ventilers motor som dundret ut imponerende 60 hk / 18 000 o/min. Mike Hailwood kjørte RC166 og vant alle løp i 250cc-klassen han deltok i, noe som ga Honda deres første fører- og produsentmesterskap, noe som bidro til selskapets fantastiske bragd med å sikre seg produsenttittelen i alle fem klassene fra 50cc til 500cc. ★Dette er et limesett i plast i skala 1/12. ★Lengde: 166 mm, bredde: 43 mm. ★Forhjul og bakhjul har svært detaljerte, flate metallbelagte felger og eiker for å oppnå en realistisk finish. ★Den luftkjølte rekkemotoren med 6 sylindre har kjøleribber som gir en flott skalarealisme. ★En del av motordekselet i ett stykke bidrar til å gjenskape sykkelens slanke form. ★Massive gummidekk med realistiske slitebanemønstre er inkludert. ★Fotoetsede deler for bremsetrommelens luftkanaler, motordeksellåser og kjedeglidere, samt metalloverføringer for nagler, er inkludert. Lengde: 166 mm. Bildet viser ferdig modell. 【 About the model 】 　★This is a 1/12 scale plastic assembly kit. Length: 166mm, Width: 43mm. ★Front and rear wheels feature highly detailed flat metal-plated rims and spokes to achieve a realistic finish. ★The air-cooled inline 6-cylinder engine features cooling fins which provide a great scale realism. ★One-piece cowling part helps reproduce bike's sleek form. ★Solid rubber tires with realistic tread patterns included. ★Photo-etched parts for brake drum air ducts, cowling snaps, and chain sliders as well as metal transfers for rivets are included. ■Handle bar area Accelerator and brake wires are depicted with vinyl tubing. Grips are made from elastomer. ■Wheels ABS resin wheels feature 0.4mm dia. spokes and are assembled with 9 kinds of flat metal-plated parts. ■Seat Seat is made from elastomer and features a realistic surface texture. Rivets are reproduced with metal transfers. ■Steps Aluminum turned steps are fixed to the frame with 1.2mm screws and have enough strength to hold the model in use with the racing stand. ■Under cover Underside cowling parts can be easily attached/removed thanks to the built-in magnets. The lower cowl cover. ■Markings Markings are included to depict the No.16 & No.8 and No.1 & No.7 bikes from the 1966 and 1967 Isle of Man TT Races respectively. Tech tips for assembling the kit and related detail-up parts Tech tips page for assembling the RC166 GP Racer and related detail-up parts has been uploaded.※Click here.  

Tamiya 14130 - 2014 Repsol  Honda RC213V 1/12 Repsol Honda RC213V '14 Item No: 14130 Image shows assembled and painted kit. A True Champion The 2014 season of the MotoGP class, pinnacle of the motorcycle Road Racing World Championship grand prix circuit, was a dream year for the works Repsol Honda team, which ran the RC213V. Their burgeoning young superstar Marc Marquez won 13 out of the year's 18 races, including an astounding 10 in a row to start the season and lead the team to the Team, Constructors' and Riders' Championships. The 2014 iteration of the RC213V featured a host of tweaks that ensured it was the class of the field, including an altered front cowling air intake, aerodynamics modifications to cowlings, and changes to the aluminum twin tube frame. Further updates were made to the V4's pneumatic valves, Honda's unique seamless transmission, and the electronics package. About the Model ★This is a 1/12 scale plastic model assembly kit. ★Length: 173mm, width: 58mm. ★The kit recreates Marc Marquez' 2014 champion No.93 bike with glorious accuracy. ★Cowl parts may even be removed after assembly to allow closer appreciation of the jaw-dropping detail underneath. ★Clear windscreen parts are attached without the need of cement. ★Tank grips are also depicted using transparent parts. ★Minute screws are used to firmly fasten parts such as the engine, swing arm and front fork to the frame. ★Marvel at the recreation of the bike's V4 powerplant, complete with depictions of auxiliary equipment. ★Tail cowling part features a rendering of the camera. ★Decals are included to recreate logos on the sidewalls of the realistic solid rubber tires. ★Comes with a comprehensive set of screen printed decals to depict the numerous sponsor logos, instrumentation panel, etc. ★ Packaged with a racing stand in box. ★Tamiya Color paints for painting the 1/12 Repsol Honda RC213V '14 Tamiya Color Spray Colors (Item No.) Tamiya Color Spray Colors (Item No.) TS-14 Black (Undercoat for TS-83) 85014 TS-36 Fluorescent Red 85036 TS-26 Pure White 85026 TS-83 Metallic Silver 85083 TS-30 Silver Leaf 85030 TS-96 Fluorescent Orange 85096   Tamiya Color Acrylic Colors (Item No.) Enamel Colors (Item No.) Tamiya Color Acrylic Colors (Item No.) Enamel Colors (Item No.) X-2 White 81502 80002 X-26 Clear Orange 81526 80026 X-7 Red 81507 80007 X-27 Clear Red 81527 80027 X-8 Lemon Yellow 81508 80008 X-31 Titanium Gold 81531 80031 X-10 Gun Metal 81510 80010 X-32 Titanium Silver 81532 80032 X-11 Chrome Silver 81511 80011 XF-1 Flat Black 81701 80301 X-12 Gold Leaf 81512 80012 XF-10 Flat Brown 81710 80310 X-13 Metallic Blue 81513 80013 XF-16 Flat Aluminum 81716 80316 X-16 Purple 81516 80016 XF-56 Metallic Grey 81756 80356 X-18 Semi Gloss Black 81518 80018 XF-85 Rubber Black 81785 80385 X-19 Smoke 81519 80019 --- --- ---      

Tamiya 14133 - 1/12 1998 Yamaha YZF-R1M En Legende Utviklet: 1998 var et år å huske innen motorsykkelbransjen da Yamaha lanserte den første YZF-R1. Den ble utviklet for å gi spennende fart på svingete veier, og viste seg å være en svært populær motorsykkel. I 2015 ble den nyeste YZF-R1-modellen lansert, designet med et videreutviklet konsept som ville gjøre den til en mer baneorientert motorsykkel. Serien inkluderer YZF-R1M, som drar nytte av Yamahas omfattende MotoGP-erfaring. Den får mest mulig ut av sin 200 hk 998cc 4-sylindrede motor, med en klasseledende elektronikkpakke for å støtte føreren. En datalogger og kommunikasjonskontrollenhet (CCU) registrerer rundetider og baneinformasjon, mens karosseridekk i karbonfiber øker ytelsen ytterligere. Den langvarige Tamiya 1/12 motorsykkelserien ønsker nå denne svært raffinerte motorsykkelen velkommen i sin stall av emner. Om modellen : ★Dette er et monteringssett i plastmodell i skala 1/12. Lengde: 172 mm, bredde: 68 mm, høyde: 97 mm. ★Den kompakte og raffinerte YZF-R1M-formen er gjengitt med stor nøyaktighet. ★En detaljert gjengivelse av den 4-sylindrede 998cc-motoren er skrudd fast på rammen for en effektiv og slitesterk konstruksjon. ★Frontdekselet har separate deler som viser frontlykter, posisjonslys og innerdeksel. ★Syntetiske gummidekk har autentiske slitebanemønstre. ★Leveres med utstillingsstativ inkludert. ★The racy, MotoGP bike-inspired form is captured with customary Tamiya accuracy in 1/12 scale. ★Plenty of detail to drink in, with the 4-cylinder engine, radiator, oil cooler and much more! ★998cc engine is attached to the Deltabox frame. Air chamber is also also depicted. ★Highly realistic recreations of Bridgestone Battlax Racing Street RS10 tires will catch the eye. ★Rear suspension features a screw-attached swing arm and utilizes a metal coil spring. ★A display stand is included in the kit, and will also be of use during the assembly process. ★Fine decals depict digital displays, while metal transfers are in the box to create mirror surfaces. ★The kit includes both single and tandem seat parts, allowing the modeler to choose which to create. ★Of course, clear parts are included to recreate lenses for the headlights and position lights. The kickstand is screw-affixed. Those wishing to stand the bike on it when finished can select the appropriate angle during assembly. Comes with a full range of decals to recreate the markings on the bike, plus masking stickers for the paint job.

Tamiya 14134 - 2018 Honda MONKEY 125 1/12 1/12 Motorcycle Series No.134 Honda Monkey 125 Item No: 14134 Length: 143mm. Image shows painted and assembled kit.   Good Things Come in Small Packages The Monkey 125, which went on sale in Japan in July 2018, was developed to be a playful successor to the wildly popular Honda Monkey leisure bikes of yesteryear. The design is unmistakably a Monkey as evidenced by its trapezoid profile and chunky tires, while plenty of power is provided by a 125cc 4-stroke engine. A comfortable seat ensures smoothness, even on rougher rides, and gleaming chrome finishes for fenders, muffler cover and more make for an aesthetically stunning bike.   About the Model ★This is a 1/12 scale plastic model assembly kit. Length: 143mm, width: 63mm, height: 101mm. ★Features a detailed rendering of the 4-stroke engine, with cooling fins. ★Engine, swing arm, front fork and rear fender parts are screw-attached to the bike frame. ★Metal-plated parts recreate fenders, muffler cover and more. ★Synthetic rubber depictions of 12-inch tires have a realistic tread pattern. ★Vinyl tubing is included to recreate various lines and pipes. Packaging   ★The compact, characterful form of the Monkey 125 is captured with aplomb by this model. ★Metal-plated and clear parts are used in the accurate depiction of the LED headlight. ★Features chrome plated parts for muffler cover, fenders and more, plus metal rear spring.   ★Left: Depictions of the 12-inch block tires are synthetic rubber and feature realistic tread. ★Right: Vinyl tubing is included in the kit to recreate throttle, brake, clutch lines and more.   ★Left: Soft plastic is used to recreated the comfortable-looking seat, with a decal for the HONDA logo. ★Right: Decals recreate various markings and emblems. Demarcation stickers are also included.   Tamiya Color paints for painting the 1/12 Honda Monkey 125   Tamiya Color Spray Paint Tamiya Color Spray Paint TS-8 Italian red TS-17 Gloss aluminum TS-21 Gold TS-26 Pure white TS-34 Camel yellow TS-73 Clear orange TS-74 Clear red TS-95 Pure metallic red   Tamiya Color Lacquer Paint Tamiya Color Lacquer Paint LP-11 Silver     Tamiya Color Tamiya Color Tamiya Color X-1 Black X-2 White X-10 Gun metal X-11 Chrome silver X-18 Semi gloss black X-27 Clear red X-32 Titanium silver XF-1 Flat black XF-2 Flat white XF-20 Medium grey XF-56 Metallic grey

Tamiya 14137 - 1/12 Street Rider  Ut på gatene Legg til en helt annen dimensjon til motorsykkelmesterverket ditt i skala 1/12 med denne realistiske figuren! En fører er avbildet i jeans og skinnjakke, og kan settes sammen i en av to forskjellige positurer, med valg av hjelmtype også inkludert. Om modellen ★Dette er et monteringssett for plastmodellfigur i skala 1/12. ★Inneholder svært realistiske gjengivelser av detaljer som førerens ansiktsuttrykk og folder i klærne. ★Leveres med to forskjellige alternativer for hode, armer og hender – velg å montere med hjelm på, med hansker eller med hjelmen i hånden og en lue. ★Leveres med deler til både halvhjelm og trekvarthjelm. ★En skrufestet base sikrer sikker fremvisning. Høyde: 160 mm. Bildet viser lakkert og montert sett. Motorsykkelmodell selges separat.

Tamiya 14138 - 2019 Honda CBR1000RR-R FIREBLADE SP 1/12 1/12 Motorcycle Series No.138 Honda CBR1000RR-R FIREBLADE SP Item No: 14138 Length: 176mm. Image shows model with separately sold Item 12690 installed.   The Complete Package Announced in 2019, the CBR1000RR-R FIREBLADE SP is a stunning triumph of motorcycle design with a highly circuit-oriented feel, yet providing an accessible ride to road-going owners. There is plenty of race technology borrowed from the RC213V MotoGP bike, a class-leading 217.5hp engine, and state of the art electronics that assist with many aspects of the bike including its suspension. It is adorned with aerodynamic honed cowls, highlighted by triple interior fairing winglets in the side cowls. The Honda works Team HRC is planning to enter the 2020 SBK championship using a bike based upon this masterpiece.   About the Model ★This is a 1/12 scale plastic model assembly kit. Length: 176mm, width: 68mm, height: 96mm. ★The aerodynamically honed form of the bike is captured in style, including renderings of the internal winglets in the side cowls. ★Features a detailed depiction of the class leading liquid cooled 4-cylinder engine. ★Engine, swing arm, front fork and muffler are screw-attached to the model frame. ★Has screw-attached headlight. ★Side and under cowl can be removed after completion of assembly. ★Metal plated parts are used for mirror surfaces. ★Tires have realistic texture and tread patterns. ★Comes with two marking options, masking stickers and a racing stand. Packaging   ★The aerodynamically honed form of this superb bike is captured with aplomb in accurate 1/12 scale. ★The model can also be depicted in the moody yet eye-catching Matte Pearl Morion Black color scheme. ★This view shows the side cowl winglets and central ram air intake, which mirrors that of the actual bike.   ★Marvel at the detail achieved on the brembo caliper and the brake discs with their drilled holes. ★The Akrapovic muffler is a slide molded component, with integrated sections of the silencer. ★Choose whether to assemble with the standard tandem seat or the optional single seat design.   ★Tires are realistically depicted in synthetic rubber, and have authentic molded tread patterns. ★Clear parts are used across the model for superior realism, here on the taillight and turn signals. ★Side cowl and undercowl components can be removed from the model after completion of the assembly process.   ★The model features a detailed rendering of the high performance liquid cooled 4-cylinder. ★The tank cover can also be removed after assembly, and the engine-top airbox is depicted by a separate part. ★Fuel tank and cover are slide molded designs, helping to capture their complex forms in style.   ★The model includes a screw-attached kick stand, which can be used to display the model if desired. ★The driver position is a busy affair, including three types of panel display and metal transfer mirror surfaces. ★An array of decals is included, as are masking stickers for the paint job, and metal transfers.     Tamiya Color paints for painting the 1/12 Honda CBR1000RR-R FIREBLADE SP   Tamiya Color Spray Paint Tamiya Color Spray Paint Tamiya Color Spray Paint TS-6 Matt black TS-8 Italian red TS-14 Black TS-21 Gold TS-26 Pure white TS-29 Semi gloss black TS-30 Silver leaf TS-34 Camel yellow TS-40 Metallic black TS-51 Racing blue TS-72 Clear blue TS-73 Clear orange TS-74 Clear red TS-76 Mica silver TS-82 Rubber black TS-87 Titanium gold TS-88 Titanium silver ---   Tamiya Color Lacquer Paint Tamiya Color Lacquer Paint Tamiya Color Lacquer Paint LP-1 Black LP-2 White LP-3 Flat black LP-5 Semi gloss black LP-11 Silver LP-21 Italian red LP-38 Flat aluminum LP-40 Metallic black LP-45 Racing blue LP-48 Sparkling silver LP-52 Clear red LP-53 Clear orange LP-61 Metallic gray LP-62 Titanium gold LP-63 Titanium silver LP-65 Rubber black LP-68 Clear blue LP-69 Clear yellow LP-72 Mica silver --- ---   Tamiya Color Tamiya Color Tamiya Color X-1 Black X-2 White X-11 Chrome silver X-18 Semi gloss black X-23 Clear blue X-24 Clear yellow X-26 Clear orange X-27 Clear red X-31 Titanium gold X-32 Titanium silver XF-1 Flat black XF-16 Flat aluminum XF-56 Metallic grey XF-80 Royal light gray XF-85 Rubber black   Item 12690 1/12 Scale Honda CBR1000RR-R Front Fork Set (sold separately) ★Make your model even more astounding with this separately sold Detail-Up parts set! ★It includes gold color anodized aluminum fork outer tubes and reservoirs, gold color plated brass fork inner tubes, yellow coil spring, plastic fork bottoms and more.   ★Ideal for recreating scorched metal look on chambers Item 87088 Weathering Master D Set (Burnt Blue, Burnt Red, Oil Stain) Item 87123 Tamiya Weathering Master F Set (Titanium/Light Gun Metal/Copper)   ★For a professional finish on metal parts Item 87204 Metal Primer (40ml Bottle)   ★Precision cementing Item 87188 Tamiya Multipurpose Cement (Clear)   ★Present your model as it deserves to be displayed Item 73005 Display Case D

Tamiya 14141 - 1/12 2022 Honda CBR1000RR-R FIREBLADE SP 30th Anniversary  1/12 Motorcycle Series No.141 Den legendariske første FIREBLADE – CBR 900RR – var pioner innen supersportsjangeren etter lanseringen i 1992. I 2022 annonserte Honda denne spesialversjonen av CBR1000RR-R for å feire 30-årsjubileet og arve den klassiske trefargede fasaden. CBR1000RR-R arver en rekke teknologi fra Hondas RC213V MotoGP-motorsykkel. Dens 999cc rekkefirermotor gir klassens beste 218 hk, og lar den levere ytelse på banenivå samtidig som den er en glede å håndtere på offentlige veier. ★Dette er et statisk modellmonteringssett i skala 1/12. Lengde: 176 mm, bredde: 68 mm, høyde: 96 mm. ★Sykkelens aerodynamisk finslipte form er gjengitt med stil, inkludert gjengivelser av de interne vingeformene i sidedekslene. ★Har en detaljert gjengivelse av 4-sylindret motor. ★Motor, svingarm, forgaffel og lyddemper er skrudd fast til modellrammen. ★Side- og underdekslet kan fjernes etter at monteringen er fullført. ★Metalloverføringsbilder brukes til å avbilde speilflater. ★Klistremerker er inkludert for å gjenskape elementer fra den trefargede børstedekorasjonen. ★Dekkene har realistisk tekstur og slitebanemønstre.  

Tamiya 14142 - 1/12 Honda Dax125 TAMIYA LIMITED EDITION Hondas Dax har en historie som strekker seg tilbake til debuten i 1969. I mars 2022 ble Dax modernisert med Dax125 – en modell som fortsatt henter mye inspirasjon fra originalen, blant annet med sin karakteristiske T-bone ramme. Den har en 123cc motor og en 4-trinns girkasse som kan betjenes uten bruk av clutch fra fører, noe som gjør den til et utmerket alternativ for langturer. Tamiya Limited Edition utgaven av sykkelen ble lansert eksklusivt i Thailand og har en lekker metallic blå ramme, utsmykket med en rekke spesialdeler. Om modellen ★ Dette er et 1/12 plastbyggesett. Lengde: 17mm, bredde: 67mm, høyde: 103mm. ★ Dax som er designet for enklere montering og maling. ★ Den 123cc store ensylindrede firetaktsmotoren er gjengitt i detalj. ★ Motor, svingarm og forgaffel festes til rammen med skruer. ★ Forkrommede deler gjenskaper detaljer som eksosbeskytter, sidedeksel og mer. ★ Den bakre støtdemperen har en metallfjær. ★ Dekkene er laget av syntetisk gummi med mønster. ★ Du kan velge å bygge modellen som standardutgave eller Tamiya Limited Edition utgaven. ★ Det følger med en hjelm i skala 1:12.

Tamiya 16020 - 1981 Honda CB750F kit 1/6 Detaljert limesett, mange fine chrome detaljer, tank og deksler i rød candy. This is a 1/6 scale plastic assembly kit model of the Honda CB750F, which quickly gained popularity after its release in 1979. The beautiful curved lines of the bike have been realistically reproduced. The air-cooled inline 4-cylinder 4-carburetor engine features detailed cooling fins and spark plug cables which are depicted with vinyl tubing. The metal front forks have a beautiful metal plated finish and coil springs that enable it to move. The exhausts also feature a smooth metal plated finish. In addition, the side covers are removable to showcase the internal mechanisms even after assembly. Length: 380mm About the Honda CB750F The Honda CB750F Motorcycle first appeared on the Japanese market in June 1979 and was shortly the best seller in the 750 motorcycle class. Just ten years prior to their CB750F, Honda opened the field of multi-cylinder, large-bore bikes with the now famous four cylinder CB750. Honda had extensively tested the multi-cylinder concept and won several Grand Prix motorcycle races, and the CB750 was based upon these experiences. The engines worked flawlessly and provided very smooth power with almost no vibration, and so shocked the industry, that soon many of the famous makers also produced four cylinder large cubic motorcycles. Honda, of course, held the number one position in sales for many years, but then Kawasaki released their “Z” series DOHC 750 bikes, and took over the number one position, relegating Honda to 2nd place. Honda, however, did not take this set back for long, and continued to improve their engines, and in 1979 released a CB 750K DOHC with four valves per cylinder, a powerful 68hp, and completely new body styling. It was not long before Honda was again number one! The CB750F, released in June 1979 was styled after the very popular European Honda CB900F, which had been copied from their racing RCB bike. This styling was new to stock motorcycles of the world. The low positioned handle bars and rear positioned foot rests, allow a “slouched” riding position and this style is what set the standard for the eighties. The CB750F is powered by a 4 cylinder DOHC 748cc engine with 4 valves per cylinder, and the 1981 version produces 70 brake horsepower. The bike has a double cradle frame of welded steel tubing, 37mm air front forks with equalizer and 30 way adjustable rear shocks with variable hydraulic dampening. It is equipped with a maintenance-free transistorized pointless inductive ignition system and braking is accomplished with a dual caliper double disc front brake and a large single disc at the rear. A newly designed racing type front fender with spoiler has proved to be very effective and popular among bike enthusiasts. The overall styling of that unveiled in 1979, with the smooth flowing lines from tank to tail light have been retained, and it is likely that this fine motorcycle will keep the Honda Company number one for years to come.

Tamiya 20069 - Fiat 131 Abarth Rally Olio Fiat 1/20 1/20 Grand Prix Series no.69 Fiat 131 Abarth Rally Olio Fiat Item No: 20069 Length: 208mm. Image shows painted and assembled kit.   Enter a Champion! The Fiat 131 Abarth Rally is the front engine rear drive car which made a rally debut in 1976 and took titles in '77, '78 and '80. The famous Italian car-tuning brand Abarth developed this car as an Abarth-tuned version of the Fiat 131 Mirafiori with 1,995cc inline-4 DOHC 4-valve engine capable of 215hp, and 4-wheel independent McPherson strut suspension with front/rear ventilated disc brakes. Also, it was extremely lightweight thanks to extensive use of FRP and aluminum across its body. The version of 1976 and 1977 was finished in a navy blue and yellow livery based on the colors of Olio Fiat.   About the Model ★This is a 1/20 scale plastic model assembly kit. Length: 208mm, width: 98mm, height: 75mm (includes antenna). ★Stylish form with overfenders and spoilers is recreated in style. ★The Abarth tuned 4-lined DOHC engine features depictions of details such as the Abarth logo carved into the cam cover, belts and ignition cables. ★The interior is accurately depicted with the roll bar, door interior panels, dashboard, pedals, and footrest. ★The rear seat helmet holder is also recreated using separate parts. ★The chassis underside, front/rear suspension and disk brakes are realistically rendered, based on the research of the real car. ★The antenna is crafted in stainless steel. ★Decals and masking stickers for use in painting are also included, ★Comes with two figures (driver and co-driver). Packaging   ★Left: The classic boxy form is accurately recreated, complete with the distinctive overfenders and front/rear spoilers. ★Right: The bonnet opens on its front hinge; the inline-4 DOHC engine has ignition cables, radiator, oil cooler, and triangular bar.   ★Left: The trunk lid also opens on a hinge, and its interior includes renderings of the spare tire, fuel tank, and battery. ★Right: Decals to recreate the sponsors and more, and masking stickers for use in painting the model are also included.     Tamiya Color paints for painting the 1/20 Fiat 131 Abarth Rally Olio Fiat   Tamiya Color Spray Paint Tamiya Color Spray Paint TS-47 Chrome yellow TS-55 Dark blue   Tamiya Color Lacquer Paint Tamiya Color Lacquer Paint Tamiya Color Lacquer Paint LP-1 Black LP-2 White LP-3 Flat black LP-4 Flat white LP-5 Semi gloss black LP-8 Pure yellow LP-11 Silver LP-38 Flat aluminum LP-52 Clear red LP-53 Clear orange LP-61 Metallic gray LP-65 Rubber black LP-66 Flat flesh LP-79 Flat red ---   Tamiya Color Tamiya Color Tamiya Color X-1 Black X-2 White X-6 Orange X-7 Red X-8 Lemon yellow X-9 Brown X-11 Chrome silver X-12 Gold leaf X-18 Semi gloss black X-26 Clear orange X-27 Clear red XF-1 Flat black XF-2 Flat White XF-7 Flat red XF-10 Flat brown XF-15 Flat flesh XF-16 Flat aluminum XF-24 Dark grey XF-55 Deck tan XF-66 Light grey XF-85 Rubber black   Information is current as of January 18, 2021. Specifications are subject to change without notice.    

Tamiya 24029 - 1/24 1981 Mercedes-Benz 500 SEC Dette modellsettet gjenskaper Mercedes-Benz 500 SEC fra 1981. Modellsettet ble opprinnelig utgitt i 1982. Den nye utgaven leveres med oppdaterte dekaler, bruksanvisning og emballasje. Om Mercedes-Benz 500 SEC Mercedes-Benz har lenge hatt en ledende posisjon i bilverdenen. 500 SEC debuterte som en av de beste luksuskupéene på sin tid høsten 1981. Denne bilen hadde en aerodynamisk 2-dørs hardtop-form med fire seter og ble drevet av en 5-liters V8-motor som var i stand til 231 hk og ga en toppfart på 225 km/t. 500 SEC var virkelig den komplette pakken, og tilbød ytelse, luksus og pålitelighet, og satte standarden for sine etterfølgere på alle områder av bilmarkedet i årene som kommer. • Plastmodellmonteringssett i skala 1/24. Lengde: 209 mm, bredde: 87 mm, høyde: 60 mm. Har realistisk gjengivelse av 5-liters V8-motor og interiør. Motorpanseret er avtakbart. Drivsystemet, uavhengig firehjulsoppheng, drivaksler og undersiden av chassis er nøyaktig gjengitt. Interiøret har realistiske gjengivelser av detaljer som instrumentpanel og seter. Oppdaterte dekaler gjenskaper instrumentpaneler, logoer, mønstre på trepaneler og seteflater. Har solide syntetiske gummidekk med slitebanemønstre. Instruksjonene viser tre karosserifarger for lakkering: sølv, hvit og gull. Maling som anbefales: X-1 X-2 X-4 X-6 X-7 X-8 X-10 X-11 X-18 XF-16 XF-25 XF-56

Tamiya 24031 - 1/24 1980 Audi Quattro Audi Quattro spilte en viktig rolle i å flytte firehjulsdrevne kjøretøy bort fra å være det eksklusive domenet til tunge terrengbiler. Den var en av stjernene på Genève International Motor Show i 1980. Selv om karosseriet lignet på Audi Coupé, hintet de utvidede skjermene og spoilerne foran og bak sterkt på dens høye ytelse, men den permanente firehjulsdriften var naturligvis hovedtemaet. Differensialer foran og bak ble kombinert med en midtdifferensial i et oppsett som fylte en rekke krav: jevn veikjøring; overlegen hastighet og svingegenskaper; og eksepsjonell stabilitet. Kraften ble levert av en 2144cc rekkemotor med fem dempere med turbolader og intercooler som ytet imponerende 200 hk, mens for- og bakakslingen hadde MacPherson-fjæring og skivebremser, ventilertskiver foran. I 1981 debuterte en rallyversjon av bilen og tok den globale racerbanen med storm, vant flere løp og åpnet døren for andre firehjulsdrevne rallybiler. Dens innflytelse merkes også i bilverdenen, og selv om bilen i seg selv fortsatt er en tidløs klassiker, brukes navnet «quattro» fortsatt av Audi for firehjulsdriften. Om modellen • Dette er et byggesett i skala 1/24 av Audi Quattro. Lengde: 185mm, bredde: 79mm, høyde: 57mm. • 2-dørs coupé, sporty form med breddet karosseri og store støtfangere med spoilere gjenskapes med største realisme. • Har realistiske avbildninger av inline-5 turbomotor, fjæring og 4WD-drivsystem. • Interiørfunksjoner som seter, dashbord og girspak er også trofast gjenskapt. • Dekaler fanger opp stripemønstre på seter. • Realistiske syntetiske gummidekk med slitebanemønster. • Leveres med én førerfigur. • Instruksjonene viser fire farger for maling: sølv, rød, hvit og blå. Maling anbefalt av Tamiya: TS-8 - TS-89 TS-26 Pure White / LP-2 White TS-29 Semi Gloss Black / LP-5 Semi Gloss Black TS-76 Mica Silver / LP-72 Mica Silver X-1 Black X-6 Orange X-7 Red X-11 Chrome Silver X-26 Clear Orange X-27 Clear Red XF-10 Flat Brown XF-16 Flat Aluminum About the Model This is a 1/24 scale plastic model assembly kit. Length: 185mm, width: 79mm, height: 57mm. ★Blister fenders and rear spoiler are recreated on this realistic rendering of the legendary 2-door coupe Audi quattro. ★Authentic depictions of the inline-5 engine, suspension and four-wheel drive system. ★The interior features recreations of seats, dashboard, shifter and more. Decals are used for the seat patterns. ★Treaded solid synthetic rubber tires. ★A driver figure is included. This legendary two-door coupe features classical styling with blister style overfenders. The unique inline-5 turbo engine and its engine room are depicted in style. Front seats have separate headrest parts, and excellent dashboard detail is a highlight of the interior. The spoiler is an individual part, while clear parts are painted to depict the rear combination lights. A comprehensive decal sheet includes seat stripes and a choice of 2 pin stripe and emblem colors depending upon the body tone.

Tamiya 24033 1/24 Toyota Celica Supra Long Beach GP Marshal Car Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. 1970 var året verdens første ble møtt med Toyotas legendariske Celica, og bilen fortsatte å innovere og imponere gjennom det innenlandske markedets toppspesifikasjon Celica XX i 1978 og deretter andre generasjon Celica XX 2800GT (kjent som Celica Supra utenfor Japan) fra 1981. Med en 2,8-liters DOHC 6-sylindret motor og utstyrt med jazzy overfenders og takspoiler i noen eksportversjoner, var bilen et hyppig syn på racerbaner; den ble ansatt som marskalkbil for Toyota Grand Prix i Long Beach i 1982, komplett med en BAE-turbolader og økt effekt på 230 hk som utvilsomt vant bilen enda flere beundrere i løpet av løpet. 1/24 Sports Car Series No.33 Toyota Celica Supra Long Beach GP Marshal Car Item No: 24033 Length: 195mm. Image shows painted and assembled kit.   Enjoying the Limelight 1970 was the year that the world was first greeted with Toyota's legendary Celica, and the car continued to innovate and impress through the domestic market's top spec Celica XX in 1978 and then the second generation Celica XX 2800GT (known as Celica Supra outside of Japan) from 1981. Sporting a 2.8-liter DOHC 6-cylinder engine and fitted with jazzy overfenders and roof spoiler in some export versions, the car was a frequent sight at racetracks; it was employed as the marshal car for the Toyota Grand Prix of Long Beach in 1982, complete with a BAE turbocharger and boosted output of 230hp that doubtless won the car even more admirers over the race weekend.   About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 195mm, width: 81mm, height: 67mm. ★The wedge shaped form of the car is captured in style, with separate parts for overfenders, roof spoiler and other details. ★Clear and plated parts are used in the depiction of the light bar. ★Move the retractable headlights via a simple one-touch mechanism. ★Underside offers excellent detail with depictions of suspension, exhaust and more. ★Features a realistic interior with easy to assemble parts breakdown. ★Wheels are metal-plated. Front wheels are steered. ★Comes with a driver figure to up the realism. Packaging   ★The breathtaking form of the car is captured in style, with separate parts provided to recreate the front and rear overfenders. ★A combination of clear and metal-plated parts is employed to depict the light bar, with a separate part for the roof spoiler. ★Moving headlights are another feature of the model, and can be secured in their popped up position if so desired.   Tamiya Color paints for painting the 1/24 Toyota Celica Supra Long Beach GP Marshal Car   Tamiya Color Spray Paint Tamiya Color Spray Paint TS-86 Pure red ---   Tamiya Color Lacquer Paint Tamiya Color Lacquer Paint Tamiya Color Lacquer Paint LP-1 Black LP-5 Semi gloss black LP-7 Pure red LP-11 Silver LP-27 German gray LP-38 Flat aluminum LP-52 Clear red LP-53 Clear orange LP-66 Flat flesh   Tamiya Color Tamiya Color Tamiya Color X-1 Black X-6 Orange X-7 Red X-11 Chrome silver X-18 Semi gloss black X-26 Clear orange X-27 Clear red XF-1 Flat black XF-15 Flat flesh XF-16 Flat aluminum XF-63 German grey XF-83 Medium sea gray 2 (RAF)   ★Bodywork to die for Item 87036 Tamiya Modeling Wax with Applicator Item 87068 Tamiya Polishing Compound (Coarse) Item 87069 Tamiya Polishing Compound (Fine) Item 87070 Tamiya Polishing Compound (Finish) Item 87090 Tamiya Compound Applicator (3 Color Set) Item 87151 Gloss Coating Varnish   ★Present your model as it deserves to be displayed Item 73004 Display Case C Information is current as of March 4, 2020. Specifications are subject to change without notice.

Tamiya 24116 1/24 1991 Mazda RX-7 R1 Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Om modellen Dette er et 1/24-skala plastmodellmonteringssett som viser den oppdaterte versjonen av den globalt populære RX-7 som ble solgt i oktober 1991. Denne modellen viser den sporty R1-typen. Den dynamiske krumningen til karosseriet er gjenskapt med stil, med en avtakbar motorhette som tillater inspeksjon av det detaljerte motorrommet og det roterende kraftverket under. Har et realistisk interiør med et utvalg av venstre- og høyrestyrte oppsett.    

Tamiya 24124 1/24 Mitsubishi Montero Blue Edition with Sport Options Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Length: 209mm. Image shows assembled and painted kit. Weigh up Your Options Mitsubishi's popular Montero (Pajero) line of vehicles first appeared in 1982, and in January 1991 received a full model change. Among the numerous variants released was this car - the top-class VR, which was powered by a 155hp 3-liter V6. Its Super Select 4WD drivetrain furnished a choice of full-time 4WD and two part-time 4WD modes, plus a 2WD setup. Front double wishbone and rear 3-link suspension made for superb off-road ability. This kit depicts the Montero with a number of customized parts such as front bull bars, quad roof lamps, and more! About the Model ★This is a 1/24 scale plastic model assembly kit which recreates the Mitsubishi Montero VR with customizing option parts. Length: 209mm, width: 86mm. ★Option parts such as bull bars, rear ladder, roof-top lamps and wheels are given a luxurious metal-plated finish. ★Clear hood parts can be left unpainted to give good look at the detail in the engine room underneath. ★Features an accurate rendering of the ladder frame chassis, with realistic depictions of the 4WD drive train and durable ABS resin suspension parts. ★The long-stroke suspension is movable thanks to the use of metal coil springs. ★Solid synthetic rubber tires have realistic tread patterns. ★Parts for left- and right-hand drive cars are included.  

Tamiya 24125 1/24 Castrol Toyota Celica GT-Four 1993 Monte Carlo Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Lengde: 192 mm. Bildet viser malt og montert sett. Da teppet gikk opp for verdensmesterskapet i rally i 1993, var "92-tittelvinnende Toyota Team of Europe klare til å ta opp mot sine dyktige rivaler Lancia, Ford, Subaru, Mitsubishi og de andre, noe som gjorde dette Monte Carlo Rallyet til et veldig spennende arrangement. for motorsportfans. Toyotas svært sofistikerte Celica GT-Four RC, med sjåføren Didier Auriol ved rattet, viste imponerende ytelse ved å overgå alle konkurranser for å dominere denne første runden av sesongen. Betraktet som en av de mest teknologisk avanserte og potente rallyracingmaskinene som er tilgjengelige i dag, drives Celica GT-Four RC av en 2 liters, væskekjølt in-line firesylindret DOHC, turboladet motor, i stand til å yte 299 HK og 45,9 kg/ m dreiemoment. Denne enorme kraften kanaliseres via 6-trinns girkasse til alle fire hjul. Den elektronisk kontrollerte dreiemomentdeleren fordeler 50:50 kraft foran/bak under normal drift, men er i stand til automatisk å skifte til andre forhold når kraftfordelingssensoren oppdager en endring i veidekkeforhold eller til og med kjørestil. Nattløpsutstyr som ble brukt under Monte Carlo Rally inkluderte firedoble spot-lamper pluss kurvelamper som fikk raceren til å se enda mer massiv ut.  

Tamiya 24133 1/24 Toyota Celica GT-Four 1994 Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. 1/24 Sports Car Series no.133 Toyota Celica GT-Four Item No: 24133 ★This plastic model assembly kit depicts the top-of-the range GT-Four version of the Toyota Celica. ★From the quadruple headlights to the bulging engine hood and aerodynamic bumper, the form of the car is captured in style. ★Also features a detailed depiction of the 4-cylinder turbocharged engine, suspension and interior. ★Separate parts are included to recreate the arched rear wing. ★Build as right- or left-hand drive.  

Tamiya 24136 1/24 1966 Model Volkswagen 1300 Beetle Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. About the 1966 Volkswagen 1300 Beetle Even in this age of sophistication, the popularity of the Volkswagen “Beetle” has not diminished. The original design dates back to the 1930’s when Dr. Ferdinand Porsche provided the design framework for the “People’s Car.” Today, with more than 20 million units produced, the Volkswagen Beetle has become a symbol of mass-produced motorization, with no other vehicle exceeding this figure. Built upon the sturdy platform chassis is the amazingly reliable air cooled, flat-four cylinder engine. Suspension is four wheel independent for crisp handling and driving comfort. Although the onset of the Second World War greatly hindered Volkswagen’s marketing opportunities, it made a superb comeback shortly following the conflict, under the skillful guidance of Heinrich Nordhoff. Throughout its production life, the Volkswagen was continuously improved to meet modern automobile standards. An enlarged powerplant displacement and better visibility are two of the notable changes that enabled the Beetle to set standards for the compact car market, decade after decade. The 1966 Volkswagen model is regarded as the classic Beetle, one that retains the most of the original design traits, and it has become a collector’s item. Even today, more than half a century later, watching a nimble street bug is still a pleasant sight to behold, and its unmistakable shape will likely delight generations to come.     Suggested Paint Colors   TS-14 – Black   TS-39 – Mica Red   TS-7 – Racing White   X-1 – Black   X-11 – Chrome Silver   X-14 – Sky Blue   X-15 – Light Green   X-18 – Semi Gloss Black   X-2 – White   X-22 – Clear   X-26 – Clear Orange   X-27 – Clear Red   X-28 – Park Green   X-3 – Royal Blue   X-4 – Blue   X-5 – Green   X-7 – Red   XF-1 – Flat Black   XF-16 – Flat Aluminum   XF-19 – Sky Grey   XF-2 – Flat White   XF-24 – Dark Grey   XF-55 – Deck Tan   XF-56 – Metallic Grey   XF-59 – Desert Yellow  

Tamiya 24163 1/24 Castrol Toyota Tom's Supra GT Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. The Japanese GT Car Championships were inaugurated in 1993, and are becoming more popular with motorsports buffs throughout domestic Japan. In addition to the highly modified Japanese cars, the super cars of Europe, like Ferrari, Lamborghini and Porsche, vie for the title. During the 1995 season Toyota entered a fleet of their race tuned Supra GT's into this popular event. Packed into the Supra look alike body shell was Toyota's latest racing technology. A 2,140cc, 4-cylinder turbocharged powerplant was taken from Toyota's Eagle Mk.III racing machine, which was active during the "93 IMSA races in the U.S.A. The X-Trac developed sequential 6-speed gearbox efficiently transmitted this engine's awesome power to the rear wheels. Four wheel double wishbone suspension components were taken from another Toyota prototype racer, the TS010. The body shell was extensively modified to obtain even better aerodynamics. Additional air intakes and outlets, oversized fenders and a huge rear spoiler, gave its massive silhouette and even more aggressive appearance. Four different racing teams used the Supra during the "95 season and among them, Tom's was sponsored by Castrol. Driven by skilled drivers Sekiya and Krumm, the Castrol Tom's Supra pleased the racing fans with its outstanding performance throughout the season.  

Tamiya 24169 1/24 1965 Model Fiat 500F Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Et bedårende utseende og en ekstremt kvikk kjøretur er bare to av årsakene til den enorme populariteten til Fiat 500, som ble tatt i bruk av mange innbyggere i Italia som deres daglige tur. Den andre generasjonen av bilen ble produsert mellom 1957 og 1975. Denne bakhjulsdrevne bilen var mindre enn tre meter lang og bilens 500cc 2-sylindrede motor var plassert bak; denkunne ha sitteplass til fire personer i det ganske spartanske interiøret. 500F ble først solgt i 1965 og ble oppdatert med fronthengslede dører og større baklykter. Fiat 500 ville selvfølgelig bli en verdensomspennende hit, og til og med utviklet seg til en tredje generasjons modell i 2007. Decals are included to add optional stripes in the Italian tricolor colors. Choose whether to have the canvas sun roof up or down. As evidenced by this picture, leaving the top open gives a great look at the interior. The opening engine hood lets you admire the engine. This is the 500cc engine in 1/24 scale. The rather simple dashboard features a solitary speedometer, while most of the interior is taken up by the seats. Have a closer look at the front leaf spring and rear swing arm setups. Decals, metal transfer and masking stickers are also included in the box. Body A parts B parts C parts D/E parts Tamiya Farger i tillegg Anbefalte farger: TS-7 Racing White TS-8 Italian Red TS-17 Gloss Aluminum X-1 Black X-2 White X-3 Royal Blue X-7 Red X-11 Chrome Silver X-18 Semi Gloss Black X-19 Smoke X-26 Clear Orange X-27 Clear Red XF-1 Flat Black XF-2 Flat White XF-7 Flat Red XF-16 Flat Aluminum XF-55 Deck Tan XF-56 Metallic Grey XF-57 Buff XF-65 Field Grey      

Tamiya 24173 1/24 1964 Model Fiat Abarth 695SS Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Fiat Abarth 695 SS benyttet legendariske Fiat 500 som base, men kom med større motor og mange andre oppdateringer. Den ble skapt av den legendariske biltuneren Carlo Abarth. Den ble brukt i mange billøp på 60-tallet. Om modellen ★Lengde: 124mm, bredde: 59mm, høyde: 54mm. ★Den kompakte sportslige formen til 695 SS nøyaktig gjenskapt. ★En detaljert interiør med instrumentpanel, ratt, sportsseter og mer. ★Kommer med metallic klistremerke brukes til Abarth logoen. Bildet viser ferdigbygget og malt modell. Anbefalte farger: X-2 White X-7 Red X-11 Chrome Silver X-18 Semi Gloss Black X-26 Clear Orange X-27 Clear Red XF-1 Flat Black XF-16 Flat Aluminum XF-18 Medium Blue XF-23 Light Blue XF-53 Neutral Grey

Tamiya 24175 1/24 Taisan Standard Porsche 911 GT2 Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Om Taisan Starcard Porsche 911 GT Siden debuten tilbake i 1964 har Porsche 911-stallen etablert en enestående aktelse, både på gater og i konkurranser. "GT2" er en løpsklar versjon utviklet for verdens GT-racing-arrangementer. Den tradisjonelle 911-stylingen har blitt aerodynamisk raffinert, men har beholdt seriens umiskjennelige identitet. Den bakmonterte motoren er kjennetegnet til 911-serien, drevet av en vannkjølt, horisontalt motsatt sekssylindret enhet. Dette 3,6-liters kraftverket er kombinert med doble turboladere, og gir en fantastisk effekt på 400 pluss hestekrefter. Den sekstrinns girkassen overfører effektivt denne overfloden av kraft til bakhjulene. Fremre MacPherson fjærben og bakre multi-link fjæringssystem har en sofistikert geometri for maksimal kontroll under høyhastighetskjøring. De store bremseskivene med en diameter på 380 mm er ventilert for å takle racingmisbruket. De er utstyrt med ABS (antiblokkeringssystem), for positiv stoppkraft og sikkerhet. Den unike frontspoileren, med sine oppvendte ender, er resultatet av grundig vindtunneltesting. En enorm to-lags bakspoiler er utstyrt med luftkanaler på begge sider. De naglede over fenderne legger til det aggressive utseendet. Under de japanske GT-bilmesterskapene i 1995, deltok Porsche i en flåte av deres GT2-er, inkludert tre påmeldinger fra Team Taisan. Hver av Taisans maskiner vant en seier i løpet av sesongen, og ga den ettertraktede tittelen til laget.

Tamiya 24194 1/24 Nissan Skyline 2000 GT-R HT Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. About the Nissan Skyline 2000 GT-R During the 1960’s, the Japanese racing scene was striving to catch up with high performance racing machines of European origin. One manufacturer called Prince developed the first Japanese prototype racing machine, named the R380. With a powerful-in-line six cylinder DOHC engine mounted amidships under a low and sleek body, the R380 won the 1996 Japanese Grand Prix race event and established several world speed records in the following year. The Prince company merged with Nissan, and unveiled a special 4-door sedan Skyline model during the 1968 Tokyo Motor Show. Priced at almost double that of other Skylines in the stable, it was transplanted with a de-tuned powerplant of the R380 racer’s unit. This hot-blooded Skyline was launched into the market in February 1969, under the designation of GT-R. The 1,989cc DOHC 6-cylinder S20 type engine yielded 160hp of maximum output. In October 1970, the original 4-door sedan GT-R was replaced with a more sporty, 2-door hard-top model. Its designation “R” stood for racing, the Skyline GT-R virtually dominated Japanese racing circuits from the late 60’s to early 70’s. The 4-door and 2-door Skyline 2000 GT-R’s accomplished 50 respectable victories in domestic races during that period, establishing the famous “GT-R legend” among the Japanese motor racing enthusiasts.  

Tamiya 24199 1/24 Subaru Impreza WRC '98 Monte-Carlo Supert limesett med fine detaljer  1/24 Sports Car Series no.199 Subaru Impreza WRC '98 Monte-Carlo Item No: 24199 Length: 186mm. Image shows assembled and painted kit. About the Model ★This is a plastic model assembly kit recreating the 1998 version of the famed Subaru Impreza WRC. ★From the honed body to the numerous rally-specific features such as rear wing and night stage lights, the form of the car is captured in style. ★Tires features realistic tread patter   Packaging Specifications are subject to change without notice.

Tamiya 24200 1/24 1998 Model Volkswagen New Beetle Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. The redesigned Volkswagen New Beetle was revealed at the 1998 Detroit Auto Show. The New Beetle was different from its predecessor, but the familiar shape remains. The original Beetle goes back to Germany, 1938. The car’s features included a cute, rounded style exterior; adequate power supplied by a horizontal, air-cooled, 4-cylinder engine and a simple, practical interior. In America, the Beetle appeared in various roles from racing to custom cars. This new model, recently revealed to the public, was the topic of much attention, and eventually became the familiar icon it is today. The New Beetle is based on its popular predecessor, and retains some of the familiar characteristics. Exterior features include the rear fender, hood, roof, circular headlights, rounded taillight lenses and the overall curved motif. The interior features include an assist grip located above the passenger seat glove compartment, B pillar with safety strap and the nostalgic dashboard flower vase. The New Beetle embraced the style and feel of the vintage Beetle and infused it with modern technology to make it a safe and reliable vehicle. New items include a dual air-bag added for safety, a 2 liter 4 cylinder 115 HP gasoline engine or a 1.9 liter diesel turbo 90 HP engine, both mounted in the front. Mcpherson struts are used for the front suspension, and torsion beam coils are used in the rear. These features and the new design make the New Beetle stylish and easy to drive, and it will be a worldwide hit. Specs & Features:   Plastic parts are attached to sprues and molded in yellow and black; silver plated and clear pieces also included. Highly accurate static display model. Completely reproduced exterior and interior. Exterior features include the rear fender, hood, roof, circular headlights, rounded taillight lenses, and an overall curved motif. Interior features include an assist grip above the passenger seat glove compartment, B pillar with safety strap, and the nostalgic dashboard flower vase. Solid synthetic rubber tires. Waterslide decals. Detailed pictorial instructions.  

Tamiya 24215 1/24 Toyota Celica 1999 Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg.     About the Toyota Celica First announced at the Detroit Auto Show at the "Toyota XYR", this 7th inception of the Celica debuted on Sept. 20, 1999 showing outstanding form. Targeted specifically at younger drivers, it features a streamlined unison of power and style. MacPherson struts make up the front suspension and a new double wishbone suspension makes up the rear, which in addition to heightening stability, gives rise to sharp handling for a throughly exciting driving experience. Toyota's commitment to individualism and high performance has once again paid off with their latest version of the Celica sports specialty car.   About the model ★This is the 1/24 scale assembly model kit based on the 7th incarnation of the Toyota Celica. ★Overall length: 182mm, overall width: 81mm. ★Stylish form has been authentically recreated. ★Door trim and inner panels ahve been finished in smooth foam. "Cross-over cockpit" features separately molded inner door piece recreated in stunning detail. Steering wheel can be assembled on either right or left side. ★Front struts, rear double wishbone suspension, exhaust pipe, and chassis under-surface all overflow with authenticity. Below the front undercover, the bottom of the engine and transmission can also been seen. ★Wheels and headlights have been prepared as metal plated parts. ★Nylon mesh for the openings in the front bumper also included. ★"Toyota" mark on the front has also been reproduced as metal transfer.

Tamiya 24221 1/24 1998 Peugeot 206 WRC Detaljert limesett, lim og øvrig maling/lakk kommer i tillegg Kampen om den eksklusive World Rally Championship (WRC)-tittelen har de siste årene vært dominert av Toyota, Subaru, Mitsubishi og Ford. For omtrent 15 år siden var imidlertid Peugeot 205 Turbo-16 rallybilen å slå, og feide rygg mot rygg seire i 85- og 86-sesongene. Høsten 1998 kom Peugeot triumferende tilbake til rallyaksjon med den helt nye 206 WRC. Med en total lengde på bare 4m og akselavstand på 2468mm, favoriserer Peugeots nyeste maskin allsidighet fremfor stabilitet. Utstyrt med kraftig mekanikk under sitt unektelig attraktive eksteriør, bringer denne lovende rallybilen både ytelse og skjønnhet til den robuste WRC. Om modellen Tamiya er stolt over å presentere det femte bidraget til 1/24 Rally Car Line-Up, Peugeot 206 WRC (Tour de Corse-versjon) Total lengde: 168 mm, total bredde: 75,4 mm. Denne detaljerte modellen har asfalterte gummidekk (reservedekk inkludert), belagte deler for speil og reflektorer, to nivåer bakvinge og detaljert rallyfjæring. Fra de stilige kurvene på kroppen til den nøyaktig gjengitte underflaten, Tamiyas Peugeot 206 WRC i skala 1/24 vil garantert gi en hyggelig modellopplevelse. Klare plastdeler inkludert for undergrunnen, avslørende motor, girkasseoppsett og fjæring, selv etter at modellen er ferdigstilt. Peugeots varemerke blå løvemerke og diverse sponsormerker for bilnr. 14 og 15 er inkludert i settet som dekaler. Anbefalte farger: X-1 Black X-4 Blue X-6 Orange X-7 Red X-8 Lemon Yellow X-11 Chrome Silver X-12 Gold Leaf X-13 Metallic Blue X-17 Pink X-18 Semi Gloss Black X-27 Clear Red X-31 Titanium Gold X-32 Titanium Silver XF-1 Flat Black XF-4 Yellow Green XF-16 Flat Aluminum XF-25 Light Sea Grey XF-56 Metallic Grey XF-63 German Gray TS-17 Gloss Aluminum TS-26 Pure White TS-29 Semi Gloss Black

Tamiya 24229 1/24 Porsche 911 GT3 1997 Detaljert limesett i gul plast, lim og øvrig maling/lakk kommer i tillegg Since its debut in 1963, the epoch-making Porsche 911 has captivated generations of sports car enthusiasts. Over the years, various models of the 911 have been released, including the 1998 Le Mans-winning 911 GT1. In 1999, the “heart” of that automotive masterpiece, the water-cooled flat-six engine, was inherited by the Porsche 911 GT3. The brainchildren behind that machine are Porsche’s development engineers in Weissach, who imbued it with superior agility and handling, without compromising active safety. Capable of accelerating to 100km/h in a mere 4.8 seconds, and with a top speed of 302km/h, the GT3 achieved a new record for production cars when it completed a lap on the northern circuit of Nuerburgring in only 7.56 minutes. The exterior appearance of the GT3 remains true to that of its predecessors, but features a new rear end, discreet side-sills, fixed rear wing, red brake calipers and sporty 18-inch light-alloy wheels. Compared with the 911 Carrera, the four-piston aluminum fixed monobloc brake calipers are larger and sturdier than before, and tightly grip the perforated brake discs. The GT3 cockpit is true reflection of its performance. It features leather-covered bucket seats, which ensure not only ample side support, but also comfort on long journeys and provide about 20kg of weight savings. And since the entire rear-seat section of the car has been dropped, the overall weight of the GT3 was reduced by another 8kg-a true benefit for a sports car of this performance level. Tamiya has recreated this epoch-making sports car in 1/24 scale. The intricate engine is visible when model is viewed from below. The upper surface features a four part rear-wing construction, enhancing the sophistication of the body design. Kit also comes with the Porsche emblem, authentically recreated as a metal transfer. The inside of the detailed cocpit is also very autentic..

Tamiya 24247 1/24 Porsche 911 GT2 Road Version Club Sport Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Lengde: 177 mm. Bildet viser malt og montert sett. Om Porsche 911 GT2 Road Version Club Sport: Bare Porsche, forpliktet til sportsbilracing, kunne lage en racingversjon og produksjonsversjon av en sportsbil nesten identisk. Porsche 911 GT2 ble først utviklet i 1995 for å konkurrere i sportsbilløp og kretser i GT2-klassen. Tarmen til denne racingmaskinen består av 6-trinns, bakhjulsdrevet girkasse, drevet av en bakinstallert 3600cc luftkjølt V6-motor med 450 hk effekt. Den gatelovlige versjonen fikk sin ytelse redusert til 430 hk, fortsatt ansett som mer enn nok for offentlige veier, og inneholdt den ekstra komforten med fint klimaanlegg og luksusen med god lyd. Den kompakte Porsche 911 GT2 Road-versjonen var ment som et praktisk transportmiddel på arbeidsdager og for helgekamper i krigerkretsløp på fridager, og brakte enestående glede til sportsbilfans over hele verden. Om modellen : Skala 1/24, total høyde: 177 mm, total bredde: 81 mm. Form av skrue festet over fendere og overdimensjonert bakvinge nøyaktig gjenskapt. Utsøkte detaljer av rullebur og bilinteriør skarpt gjengitt. Hjul, frontlykter og reflekser har blitt gjenskapt med metalloverføringsdeler. Solide gummidekk gir denne modellen ytterligere realisme.    

Tamiya 24250 1/24 Subaru Impreza WRC 2001 Great Britain Supert limesett med fine detaljer  Flott byggesett av Subaru Impreza WRC 2001 i skala 1/24! Dekaler for #5 m/ Alister McRae følger med. Cool, damp and slippery conditions are the norm of this unpredictable and gravel-surfaced final WRC event that runs through the rugged forests of Southern Wales. Tamiya presents a 1/24 scale model of the Subaru Impreza machine that captured the WRC 2001 Driver’s Championship under the skilled driving of Richard Burn’s at the always unpredictable and never dull Rally of Great Britain. When Richard Burns earned his first Drivers” Championship Title in the 2001 World Rally Championship season it would mark the first time that an English man became champion in WRC history. The car Richard Burns drove in this brilliant season was the Impreza WRC 2001. The 2001 Impreza adopted a four-door sedan body and was highlighted by compound headlights, spoiler attached to the extreme rear and blister-style fenders. Based on race feedback from previous Imprezas, various modifications were made to improve reliability. The well-balanced horizontally opposed 4-cylinder turbo engine underwent extensive tuning to boost responsiveness, and major progress was made with electronic control of the semi-automatic transmission and front, center, and rear differential gearing. Powerful rally car exterior and interior detailing recreated with high precision. Model depicts the Subaru Impreza WRC 2001 as it raced at night upon the gravel course of Great Britain with raised chassis and block pattern tires. Light pods for night stage, driver and data reading co-driver figures included. Wheels pre-painted in gold. Front light reflector parts chrome-plated. Brake lights replicated with transparent red parts, and turn signals replicated with clear orange parts. Decals depict the car as it appeared in the Rally of Great Britain. Markings included for two drivers: Richard Burns and Toshihiro Arai. Total length: 188mm Total width: 75mm

Tamiya 24279 1/24 Porsche 911 Turbo '88 Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. 1/24 Sports Car Series No.279 Overall length: 179mm (Image shows fully assembled and painted model) Bringing Turbo Power to the Street Tamiya proudly releases the Porsche 911 Turbo, further expanding our line of Porsche 911 series of models. Famed as the culmination of the 911 series, the Turbo's impressive design and performance made it the most well known member of the 911 series. The 911 Turbo debuted in 1975 as Porsche's first street model to feature a turbo engine. The air-cooled, horizontally opposed 6-cylinder engine featured a KKK turbocharger, 3 liter displacement and 260 hp output. Models built after 1978 featured upgraded engine displacement and output of 3.3 liters and 300 hp respectively. The 911 Turbo's distinctive style, with its large-size rear wing and front and rear overfenders, coupled with its reliable performance grabbed the attention of car enthusiasts around the world.   About the Model 1/24 scale assembly kit of the 1988 Porsche 911 Turbo.  Highly detailed static display model faithfully recreates Turbo's impressive style, including front and rear overfenders and large-size rear wing. Model features all-new body design to accommodate Turbo's extra wide tires. Underside of model features realistic engine detailing with separately molded exhaust pipe. Synthetic rubber tires feature realistic tread pattern.  Metal transfers used for mirrors and logo.

Tamiya 24281 1/24 Subaru Impreza WRC Monte Carlo '05 Supert limesett med ferdiglakkerte detaljer  Kjemp for å gjenvinne kronen For 2005 WRC Monte Carlo Rally, deltok Subaru-teamet i den oppgraderte Subaru Impreza som ble brukt i siste halvdel av 2004-sesongen. Til tross for bremseproblemer, klarte 2003-mester Petter Solberg å holde tritt med lederne etter de første 2 dagene. På den siste dagen noterte han de raskeste tidene i de to første etappene for å klatre opp til 3. plass, før han ble tvunget til å trekke seg etter en kraftig krasj i snøen. Selv om de var uheldige i sesongens første løp, klarte Solberg og Subaru-teamet raskt å glemme skuffelsen til Monte Carlo, og tok seier i runde 2 i Sverige, og beviste at Solberg og Impreza har det som skal til for å vinne WRC-kronen tilbake. Om modellen ★1/24 skala replika plastmodell av 2005 Monte Carlo Rally Subaru Impreza. ★Total lengde: 183mm, bredde: 75mm, høyde: 57mm. ★Detaljer som er unike for Monte Carlo-kjøretøy, alle gjengitt, inkludert senket chassis for asfaltracing, rette underarmer, Pirelli-dekk og -hjul på veien, og korte antenner. ★Seksjonert bakvinge kommer støpt i ett stykke. ★10-eikers hjul leveres ferdigbehandlet i gull. ★ Essensen av en rallybil fullstendig fanget med detaljert cockpit og innvendig rullebur. ★Inkluderer merking for Solbergs No.5 og Sarrazins No.6 kjøretøyer.

Tamiya 24328 1/24 Porsche Turbo RSR Type 934 Jägermeister Flott byggesett fra Tamiya med fine detaljer! Dette er et plastbyggesett i 1/24 skala. Lengde: 179mm, Bredde: 83mm Modellen gjengir bilen realistisk, ned til detaljer som ikke er på 1/1, som denstore støtfangeren og den store bakvingen. Realistiske reproduksjoner av rulleburet og interiøret, fjæringen, chassisets underside og så videre, sørger for at denne modellen opprettholder et høyt nøyaktighetsnivå. Foto-etsede deler er inkludert for å forbedre modellens detaljer. 1/24 Sports Car Series No.328 Porsche Turbo RSR Type 934 Jägermeister Item No：24328 Length: 179mm　Image shows painted and assembled model. ※Enlarged image 【 The Group 4 Wild Thing! 】　The Porsche Turbo RSR was developed to race in the revamped racing Group 4, which started in 1976. Based on the 930 Turbo and competing in the aforementioned Group 4, the car was christened the 934 Turbo. It had a 2993cc engine capable of a maximum output of 485hp and torque of up to 62kg/m. One of the 50 that were produced up to May 1977, the Max Moritz Team car was sponsored by the German liqueur maker Jägermeister and bore the famous orange livery associated with the brand. This famous racing car now makes its way into the Tamiya 1/24 Scale Sports Car line up, having also appeared in the 1/12 Big Scale Series back in 1976. With the attention detail one comes to expect from Tamiya models, this model faithfully replicates the car's flared fenders and large rear wing, the interior with roll-cage, and even the underside of the chassis. The metal-plated wheels are fitted with rubber slick tires, and the front bumper and engine hood mesh are recreated using photo-etched parts while metal transfers are used for the cars mirrors. It all adds up to a very precise model! 【 About the Model 】　★This is a 1/24 scale plastic model assembly kit. ★Length: 179mm, Width:83mm ★The model faithfully reproduces the car, down to details not on the road car, such as the widened fender and large rear wing. ★Realistic reproductions of the roll cage and interior, suspension, chassis underside and so on ensure that this model maintains a high level of accuracy. ★Photo-etched parts are included to further enhance the model's detail. Item Packaging ■Faithful replications of the glamorous flared fenders and rear wing typical of Porsche design. ■The large air intake in the front bumper is fitted with photo-etched mesh parts. ■Photo-etched parts and metal transfers make for an incredibly detailed finish.   ■Exhaust pipe, rear lower suspension arms, drive shaft and turbo unit are depicted using separate parts. ■The realistic interior features accurate roll cage, bucket seat, pedals and more. ■The wing differs from that on the 930 Turbo, and the grille on the front side is created using plastic and photo-etched parts. ■Tamiya Color paints required for finishing this model Tamiya Color Item No. TS-12 Orange 85012 Tamiya Color Acrylic Paints （Item No.） Enamel Paints （Item No.）   Tamiya Color Acrylic Paints （Item No.） Enamel Paints （Item No.） X-7 Red 81507 80007   X-26 Clear Orange 81526 80026 X-10 Gun Metal 81510 80010   X-27 Clear Red 81527 80027 X-11 Chrome Silver 81511 80011   XF-1 Flat Black 81701 80301 X-12 Gold Leaf 81512 80012   XF-16 Flat Aluminum 81716 80316 X-18 Semi-Gloss Black 81518 80018   XF-56 Metallic Gray 81756 80356 The information on this page is current as of February 21, 2013. Specifications are subject to change without notice.

Tamiya 24335 1/24 Nissan Skyline 2000GT-R Street-Custom Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg.   Customizing is the Name of the Game The hard-top version of the Skyline 2000GT-R was released in 1970 and packed a serious punch with a detuned version of the inline-6 engine seen on the Nissan R380 prototype racing car. The "hakosuka", as it is affectionately known in Japan, is still a Japanese racing legend today, thanks to an incredible 50 total wins achieved in partnership with the 1969 4-door sedan GT-R. Now, it makes an appearance as a production model of the car with parts depicting popular customizations from its day, as well as a realistic driver figure. About the Model 1/24 scale. Length: 183mm, width: 73mm. ★The model recreates the Skyline 2000GT-R hard-top fitted with a host of tune-up parts typical of the era. ★Recreated tune-up parts include RS Watanabe 8-spoke wheels and front spoiler. ★DOHC 6-cylinder S20 engine is depicted with strut tower brace and metal air funnels. ★Oil cooler is created using separate parts. ★Driver figure included with separate glove and helmet parts. ★Driver figure comes with a choice of 2 left arm pieces depicting him gripping the steering wheel or gear shift. ★Strut tower bar uses photo-etched brace parts. Engine compartment features metal air funnels. ★RS Watanabe 8-spokes were a popular customization of the day. Front spoiler is recreated with separate parts. ★Photo-etched parts recreate seatbelt parts, brake discs, license plate, pedals and more with precision. ★Use the included seatbelt stickers for a racy finish! Body-side emblems are depicted by metal transfers. ★Tamiya Color Paints for painting the Nissan Skyline 2000GT-R Street-Custom   Tamiya Color Spray Color Tamiya Color Spray Color TS-17 Aluminum Silver 85017 TS-26 Pure White 85026   Tamiya Colors Acrylic Colors (Item No.) Enamel Colors (Item No.) Tamiya Colors Acrylic Colors (Item No.) Enamel Colors (Item No.) X-1 Black 81501 80001 X-26 Clear Orange 81526 80026 X-2 White 81502 80002 X-27 Clear Red 81527 80027 X-7 Red 81507 80007 X-32 Titanium Silver 81532 80032 X-9 Brown 81509 80009 XF-1 Flat Black 81701 80301 X-11 Chrome Silver 81511 80011 XF-2 Flat White 81702 80302 X-12 Gold Leaf 81512 80012 XF-16 Flat Aluminum 81716 80316 X-13 Metallic Blue 81513 80013 XF-22 RLM Grey 81722 80322 X-14 Sky Blue 81514 80014 XF-56 Metallic Grey 81756 80356 X-18 Semi Gloss Black 81518 80018 --- --- --- ★Get your photo-etched parts on with precision Item 74066 Diamond File, Item 74067 Bending Pliers Item 87091 Tamiya CA Cement (Gel Type) Item 87061 Tamiya Metal Primer ★Bodywork to die for Item 87069 Tamiya Polishing Compound (Fine) Item 87070 Tamiya Polishing Compound (Finish) Item 87090 Tamiya Compound Applicator (3 Color Set) Item 87036 Tamiya Modeling Wax ★Present your model as it deserves to be displayed Item 73004 Display Case C

Tamiya 24339 1/24 Toyoda Model AA 1936 Length: 202mm. Image shows assembled and painted kit. The First Step on the Road to Greatness Released in 1936, the Model AA was the maiden production car of the firm now known as Toyota Motor Corporation. Characterized by smooth curves and a front 3.4-liter inline-6 engine, technological advances such as synchromesh clutch 3-speed transmission and hydraulic brakes made the Model AA a dream to drive. 1,404 were manufactured until 1942. About the Model ★This is a 1/24 scale static model assembly kit of the Toyoda Model AA. ★Length: 202mm, width: 73mm, height: 75mm. ★The luxuriously styled Model AA body is breathtakingly captured, with rounded front grille and flowing fenders. ★Features realistic detailing of front/rear seats and driver position. ★Frame, engine underside and suspension are authentically rendered. ★Metal-plated parts recreate bumpers, front grille and windshield wipers. ★Bonnet and body side line details are depicted by metallic finish decals. ★Driver figure included . ★The flowing curves of the 4-door sedan body are artfully captured with Tamiya's trademark attention to detail. ★The rear of the model is fitted with a spare tire. Metal-plated parts lustrously depict bumpers, fuel cap and more. ★The underside of the model warrants a closer look, with accurate renderings of the ladder frame and drive train. ★Interior captures sumptuous seats, and has parts for steering wheel, pedals, shift stick and knee-operated horn. ★The driver figure oozes realism, right down to his stylish tie. 2 types of arm part allow your to choose his pose ★Decals are included. Photo-etched parts depict the stylised Chinese character hood emblem. ★Tamiya Color Paints for painting the Toyoda Model AA Tamiya Colors Spray Colors (Item No.) Tamiya Colors Spray Colors (Item No.) TS-14 Black 85014 TS-55 Dark Blue 85055 Tamiya Colors Acrylic Colors (Item No.) Enamel Colors (Item No.) Tamiya Colors Acrylic Colors (Item No.) Enamel Colors (Item No.) X-2 White 81502 80002 X-27 Clear Red 81527 80027 X-9 Brown 81509 80009 XF-2 Flat White 81702 80302 X-11 Chrome Silver 81511 80011 XF-55 Deck Tan 81755 80355 X-18 Semi Gloss Black 81518 80018 XF-63 German Grey 81763 80363 X-26 Clear Orange 81526 80026 XF-85 Rubber Black 81785 80385   ★Useful tools in the construction of your model Item 74087 Drill Bit (1.2mm) Item 74112 Fine Pin Vise D-R (0.1-3.2mm)   ★Useful cementing alternatives Item 87091 Tamiya CA Cement (Gel Type) - for use attaching photo-etched parts Item 87137 Tamiya Cement (for ABS) - for use attaching some plastic parts   ★Bodywork to die for Item 87036 Tamiya Modeling Wax Item 87069 Tamiya Polishing Compound (Fine) Item 87070 Tamiya Polishing Compound (Finish) Item 87090 Tamiya Compound Applicator (3 Color Set) Item 87151 Gloss Coating Varnish ★Present your model as it deserves to be displayed Item 73004 Display Case C   Information is correct as of June 2, 2015. Specifications are subject to change without notice.

Tamiya 24351 1/24 2019 TOYOTA GR Supra Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Ved den globale kunngjøringen i januar 2019 skapte TOYOTA GR Supra et verdensomspennende sus. Designet med vakker balanse, gir den superlativ håndtering og stabile hjørner, mens den sanselige lange nesen, korte dekkformen har et slående dobbeltbobletak. Kombinert med upåklagelig kraft fra en turboladet inline-seks eller inline-fire motor, er GR Supra satt til å definere neste generasjon ytelse. Nå er din sjanse til å gjenskape denne spesielle bilen i spennende Tamiya skala 1/24! 1/24 Sports Car Series No.351 TOYOTA GR Supra Item No: 24351 Length: 183mm. Image shows painted and assembled kit.   Supra Trooper! Upon its global announcement in January 2019, the TOYOTA GR Supra created a worldwide buzz. Designed with beautiful balance, it provides superlative handling and stable corners, while the sensuous long nose, short deck form has a striking double-bubble roof. Combined with impeccable power from a turbocharged inline-six or inline-four engine, the GR Supra is set to define the next generation of performance. Now is your chance to recreate this special car in excting Tamiya 1/24 scale!   About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 183mm, width: 85mm, height: 54mm. ★The dynamic lines of the body are rendered with stunning accuracy. ★Two-part wheels utilize metal plated and black components. ★Features a realistic depiction of the interior, with separate white parts for red sections. ★Includes metal transfers, plus masking stickers for window areas. ★Can be assembled as right- or left-hand drive. Packaging   ★This view of the rear shows off detailed depictions of the rear ducktail trunk lid, dual exhausts and diffuser. ★A look at the underbelly displays the extensive underpanel, plus depictions of the suspension and rear arm covers. ★A busy interior features plenty of parts, and even a separate cup holder! Choose right- or left-hand drive.   ★Separate parts are used to recreate the door panel arm rests, while decals depict instrumentation and sat-nav. ★The complex LED headlights are captured in style, using clear parts and decals for an authentic appearance. ★This model recreates the 19-inch wheels from the RZ spec car, utilizing a combination of plastic and plated parts.   ★Left: Even the seats receive extraordinary attention to detail, with separate components for headrest and shoulder areas. ★Right: Black color parts on the rear car (A pillar, grille, spoiler, etc.) are molded in black for an easier paint job.     Tamiya Color paints for painting the 1/24 TOYOTA GR Supra   Tamiya Color Spray Paint Tamiya Color Spray Paint Tamiya Color Spray Paint TS-14 Black TS-29 Semi gloss black TS-86 Pure red TS-87 Titanium gold TS-88 Titanium silver ---   Tamiya Color Lacquer Paint Tamiya Color Lacquer Paint LP-1 Black LP-2 White LP-3 Flat black LP-5 Semi gloss black LP-7 Pure red LP-27 German gray LP-38 Flat aluminum LP-52 Clear red LP-62 Titanium gold LP-63 Titanium silver   Tamiya Color Tamiya Color Tamiya Color X-1 Black X-2 White X-7 Red X-11 Chrome silver X-18 Semi gloss black X-27 Clear red X-31 Titanium gold X-32 Titanium silver XF-1 Flat black XF-7 Flat red XF-16 Flat aluminum XF-63 German grey   ★Useful tools in the construction of your model Item 74112 Fine Pin Vise D-R (0.1-3.2mm) Item 74134 Fine Pivot Drill Bit 1.0mm (Shank Dia. 1.5mm)   ★Bodywork to die for Item 87036 Tamiya Modeling Wax with Applicator Item 87068 Tamiya Polishing Compound (Coarse) Item 87069 Tamiya Polishing Compound (Fine) Item 87070 Tamiya Polishing Compound (Finish) Item 87090 Tamiya Compound Applicator (3 Color Set) Item 87151 Gloss Coating Varnish   ★Present your model as it deserves to be displayed Item 73004 Display Case C Information is current as of November 22, 2019. Specifications are subject to change without notice.

Tamiya 24365 1/24 Toyota Soarer 2000VR-Turbo Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Ved den globale kunngjøringen i januar 2019 skapte TOYOTA GR Supra et verdensomspennende sus. Designet med vakker balanse, gir den superlativ håndtering og stabile hjørner, mens den sanselige lange nesen, korte dekkformen har et slående dobbeltbobletak. Kombinert med upåklagelig kraft fra en turboladet inline-seks eller inline-fire motor, er GR Supra satt til å definere neste generasjon ytelse. Nå er din sjanse til å gjenskape denne spesielle bilen i spennende Tamiya skala 1/24! Toyota Soarer hadde sin debut i februar 1981 som Toyotas første personlige luksusbil, og imponerte sjåfører med sin lange snute, korte bakende, en avansert rekkesekser og topp moderne elektronikk. I juni samme år ble Soarer-serien utvidet med VR-Turbo modellen, som benyttet en to-liters rekkesekser SOHC turbo-motor, en firetrinns automatgirkasse, samt uavhengig fjæring på alle hjul. Inne i kupeen ble blikket trukket mot den digitale måleren med en spesiell indikator for å vise turboeffektivitet, mens den hadde luksus som ratt i ekte lær. Soarer blir ofte ansett som en av de mest fremtredende luksusbilene på 1980-tallet og var en pioner for Toyotas luksusbiler. Om modellen ★ Dette er et plastbyggesett i skala 1/24. Lengde: 192mm, bredde: 75mm, høyde: 56mm. ★ Den skarpe aerodynamikken til Soarer er nøyaktig gjengitt. ★ Soltaket kan bygges farget eller gjennomsiktig. ★ Interiør og eksteriør er troverdig gjenskapt. ★ Modellen har solide syntetiske gummidekk med realistisk mønster. ★ Dekaler er inkludert for å gjenskape karosserimerkinger og setetrekk. ★ Leveres med en sjåfør figur. Tamiya har et bredt sortiment med maling. Du kan se hele sortimentet her. Anbefalte farger: TS-17 Gloss Aluminum TS-40 Metallic Black LP-1 Black LP-2 White LP-3 Flat Black LP-5 Semi Gloss Black LP-38 Flat Aluminum LP-40 Metallic Black LP-52 Clear Red LP-53 Clear Orange LP-59 NATO Brown LP-65 Rubber Black LP-67 Smoke LP-70 Gloss Aluminum LP-75 Buff LP-77 Light Brown (DAK 1941) X-11 Chrome Silver Lengde: 192 mm. Bildet viser montert og lakkert modell. About the Model ★This is a 1/24 scale plastic model assembly kit. Length: 192mm, width: 75mm, height: 56mm. ★The aerodynamically sharp Soarer styling is accurately captured. ★The sliding sunroof has a choice of solid and clear parts. ★Interior and exterior are recreated in style. ★Solid synthetic rubber tires have realistic tread pattern. ★Decals are included to recreate body markings and seat patterns. ★Comes with a driver figure.   The rather majestic Soarer is artfully depicted in 1/24 scale. Decals in the box recreate two colors of "turbo" side marking, and lines in the tinted quarter glass. Decals will make it much easier to recreate the distinctive seat covers. The decal sheet includes various emblems and logos, as well as optional side stripes. The driver figure will give your model even more life. Body Chassis A parts B parts C parts D parts  

Tamiya 24367 1/24 Nissan Fairlady 240Z Street-Custom Supert limesett med supre detaljer. Lakk og lim må kjøpes i tillegg. Fairlady Z var en stor suksess fra lanseringen i 1969, og i 1971 ble den japanske modellen utvidet med 240Z. Den hadde et elegant langt panser, et fastback coupe design, en 150hk 2,4-liters rekkesekser motor, uavhengig fjærbeinoppheng på alle hjul og en styring med tannstang og pinjong. Inne i den sporty kabinen hadde føreren et bredt utvalg av instrumenter lett tilgjengelig. Bilen ble en stor suksess både i Japan og internasjonalt, spesielt i USA, og bilen ble ofte tilpasset av sine hengivne eiere. Om modellen Dette er et plastbyggesett i 1/24 skala. Lengde: 172mm, bredde: 71mm, høyde: 52mm. ★ Gjenskapt 240Z med populære tilpasninger fra sin tid. ★ Modellen kan også bygges som en North American Datsun 240Z. ★ Den 2.393cc rekkesekser SOHC-motoren og de tredoble forgasserne er realistisk gjengitt. ★ Bilen er avbildet med senket fjæring. ★ RS Watanabe 8-eikers hjul er i en todelt design for en enklere malejobb. ★ Realistiske dekk i syntetisk gummi. Tamiya har et bredt sortiment med maling. Du kan se hele sortimentet her. Anbefalte farger: TS-50 Mica Blue (alternativ LP-41 Mica Blue) LP-19 Gun Metal LP-30 Light Sand LP-34 Light Gray LP-35 Insignia White X-1 Black X-4 Blue X-11 Chrome Silver X-12 Gold Leaf X-14 Sky Blue X-18 Semi Gloss Black X-26 Clear Orange X-27 Clear Red XF-1 Flat Black XF-2 Flat White XF-16 Flat Aluminum XF-56 Metallic Grey XF-63 German Gray XF-85 Rubber Black Bildet viser montert og lakkert modell. About the Model This is a 1/24 scale plastic model assembly kit. Length: 172mm, width: 71mm, height: 52mm. ★The 240Z is recreated with popular customizations of its day. ★The model can also be built as a North American Datsun 240Z. ★Its 2,393cc inline-six SOHC engine and triple carburetors are rendered realistically. Air funnels are aluminum parts. ★The car is depicted with lowered suspension. ★RS Watanabe 8-spoke wheels are a two-part design for an easier paint job. ★Realistic synthetic rubber tires. The ageless 240Z form is captured in style, and the model can be assembled as a left-hand drive North American version, with a red body in images on this page. (The model with a blue body is the Japanese right-hand drive version.)   Compare the model with the "G-nose" 240ZG. This kit depicts the car with lowered suspension. Separate parts for plated and rubber bumper sections make for an easier paint job. North American spec overriders are also separate parts. The bonnet opens to let you check out the 2.4-liter L24 engine and its triple carburetors and aluminum air funnels. North American version features such as door-mounted side mirrors and opposite wipers are recreated. The DATSUN emblem is a metal transfer. Separate plated window frames save time in the paint job and really look the part. Rear combination lights use plated and clear parts in conjunction with metal transfers. Stacked twin mufflers are a real eye-catcher. Note the different North American version fuel lid and side markers. Eight-spoke RS Watanabe wheels have separate spoke and rim sections for an easier paint job. A full set of decals features both Japan and North American spec instrumentation. Logos and emblems are also on the metal transfer sheet. Body A/N parts B parts D/M/T parts E parts F/C parts L parts P/Q/R parts S parts Air funnels (shown in their packaging) Tires and poly caps (shown in their packaging)  

Tamiya 24369 - 1/24 Honda City Turbo Plastbyggesett Honda City ble lansert i oktober 1981. Det ble en populær nyhet i Hondas modellutvalg. I september 1982 fikk serien selskap av City Turbo, en modell utstyrt med en 1.2 liters rekkefirer med turbo og 100 hestekrefter, kjennetegnet av en kraftig «Power Bulge» på panseret og støtfanger med luftinntak. Motocompo ble lansert samtidig med City, og denne scooteren med en 50cc motor på 2.5 hestekrefter var designet slik at den fikk plass i bagasjerommet til City når setet ble felt ned. Om modellen ★ Dette er et 1:24 plastbyggesett. Lengde: 140mm, bredde: 68mm, høyde: 63mm. ★ City Turbo er detaljert gjenskapt ★ En førerfigur og en Motocompo scooter er også inkludert. ★ Dekaler for valg mellom tre forskjellige karosserifarger, samt maskeringsklistremerker, følger med. Anbefalte farger: TS-7 Racing White TS-14 Black TS-16 Yellow TS-86 Pure Red LP-1 Black LP-2 White LP-4 Flat White LP-5 Semi Gloss Black LP-6 Pure Blue LP-7 Pure Red LP-8 Pure Yellow LP-22 Flat Base LP-39 Racing White LP-50 Bright Red LP-78 Flat Blue X-1 Black X-6 Orange X-7 Red X-8 Lemon Yellow X-11 Chrome Silver X-12 Gold Leaf X-18 Semi Gloss Black X-26 Clear Orange X-27 Clear Red XF-1 Flat Black XF-16 Flat Aluminum

Tamiya 24374 - 1/24 1981 Skyline 2000 Turbo GTES 1/24 Skyline 2000 Turbo GTES plastbyggesett. Dette plastbyggesettet gjenskaper Nissan Skyline 2000 TURBO GT-E, opprinnelig lansert i 1981 av Tamiya som en motorisert modell (24022). Denne gangen er settet oppdatert med ny byggeveiledning, dekaler og emballasje.   Om Skyline 2000 Turbo GT-E S Blant modellene i den sjette generasjonen av Nissan Skyline, som hadde sin debut i august 1981, var 2000 Turbo GT-E･S en svært sportslig versjon. Med sin nette, kileformede karosseri benyttet denne bilen en 2-liters rekkesekser med turbo, som ytet 145hk, og firehjuls uavhengig hjuloppheng med justerbar stivhet fra førerplassen – noe som var første gang et slikt system ble brukt i en masseprodusert bil. Skivebremser ble montert på alle fire hjul. Den sofistikerte designen og mekanikken ga eierne ekte kjøreglede i denne høyytelses GT-bilen. Om modellen Lengde: 192mm, Bredde: 73mm, Høyde: 62mm. Realistisk gjengivelse av interiør, inkludert bøttestoler, fremre MacPherson støtdemperoppheng og bakre semi-trailing arm-oppheng.  Oppdaterte dekaler som gjenskaper logoer og emblemer.  Dekk i syntetisk gummi.  Leveres med én førerfigur. Bildet viser ferdigbygget og malt modell. Tamiya har et bredt sortiment med maling. Anbefalte farger: LP-3 Flat Black LP-5 Semi Gloss Black LP-18 Dull Red LP-35 Insignia White LP-37 Light Ghost Gray X-1 Black X-6 Orange X-11 Chrome Silver X-18 Semi Gloss Black X-26 Clear Orange X-27 Clear Red XF-16 Flat Aluminum XF-19 Sky Grey XF-24 Dark Grey XF-54 Dark Sea Grey XF-56 Metallic Grey TS-8 Italian Red TS-16 Yellow TS-17 Gloss Aluminum TS-26 Pure White TS-40 Metallic Black TS-42 Light Gun Metal TS-95 Pure Metallic Red

Tamiya 25170 - 1/72 Mitsubishi A6M2b Zero Fighter (Zeke) Plastbyggesett Inkluderer 8 merkealternativer (Limited Edition) ★Dette er et monteringssett i plast i skala 1/72. Flykroppens lengde: 126 mm, vingespenn: 167 mm. ★Modellen avbilder Mitsubishi A6M2b Zero Fighter★Har imponerende detaljer. ★Leveres med 8 forskjellige markeringsvalg (Begrenset opplag).

Tamiya 25200 - 1/48 Swiss Messerschmitt Bf109 E-3 Plastbyggesett Messerschmitt Bf109 var uten tvil et av de mest berømte tyske WWII-flyene. Det noen kanskje ikke er klar over, er at det nøytrale Sveits kjøpte rundt åtti Bf109 E-3-fly og under andre verdenskrig opererte dem som deres viktigste fighter. Fra september 1944 ble de dekorert med røde og hvite mønstre i et forsøk på å unngå at de ble feilidentifisert som tyske Luftwaffe-fly og skutt ned av de allierte. E-3 hadde en 1100 hk Daimler Benz DB601Aa-motor som ga god kraft.   1/48 Swiss Messerschmitt Bf109 E-3 Tamiya is delighted to announce this new variation of the popular Bf109 E-3 kit. The Messerschmitt Bf109 was undoubtedly one of the most famed German WWII aircraft; what some may not be aware of is that neutral Switzerland purchased around eighty Bf109 E-3 planes and during WWII operated them as their main fighters. From September 1944 onwards they were adorned with red and white patterns in an effort to avoid their being misidentified as German Luftwaffe aircraft and shot down by the Allies. The E-3 featured a 1,100hp Daimler Benz DB601Aa engine that provided plenty of power. About the Model • Please note that this model will be sold in a «white box format» with a label on the front. • This is a 1/48 scale plastic model assembly kit. Length: 183mm. • The Bf109 form with slimline fuselage, streamlined fuselage and relatively small wing are recreated in style. • A separately molded engine cowl accurately depicts that of the real aircraft. • Features a realistic cockpit with canopy that can be assembled open or closed, plus a pilot figure to go inside. • Dedicated decals for two Swiss aircraft are included. • Includes a dedicated cover story in Japanese, English, German and French.

Tamiya 25420- 1/72 Kawasaki Ki-61-Id HIEN (TONY) Plastbyggesett Vis ditt mot Kawasaki Hien ble offisielt tatt i bruk av den keiserlige japanske hæren (IJA) i 1943, og skilte seg ut blant sine samtidige japanske fly i Stillehavskrigen på grunn av sin væskekjølte Ha-40-motor, slanke flykropp og lange, elegante vinge. En rekke forskjellige varianter ble produsert, blant dem Ki-61-Id som hadde en 20 cm forlenget nese for å huse 20 mm kanoner, pluss 12,7 mm maskingevær i vingen. Faktisk var den med 1360 enheter den mest produserte Hien-varianten; dens overlegne ytelse i høyere høyder betydde at den ofte fikk i oppgave å ta opp kampen mot innkommende amerikanske B29-bombefly. I dette settet har delene en spesiell metallbelagt finish. ★Dette er et monteringssett i plast i skala 1/72. Flykroppens lengde: 125 mm, vingespenn: 167 mm. ★Modellen avbilder nøyaktig Ki-61-Id Type Hien med forlenget nese og slank flykropp. ★Flykropp og vingedeler har en metallbelagt overflate. ★Har imponerende detaljer i cockpiten og på landingsunderstellet. ★Dekalene inkluderer markeringer for å gjenskape den særegne marmorerte kamuflasjen som sees på noen fartøy fra 244th Air Group. ★Leveres med 3 markeringsalternativer.

Tamiya 35150 - 1/35 US Navy PBR 31MKII PIBBER VIETNAM Byggesett i skala 1/35, dette er kun båt, maling lim og diverse kommer i tillegg Når man visste at patruljerende kyst- og elvevannveier under en konflikt i Vietnam skulle bli ekstremt farlig, søkte den amerikanske marinen etter et båtdesign som raskt kunne produseres og som de fleste lett kunne manøvrere. Et valg ble en glassfiber båt bygget av Modutec Marine i Seattle Washington. Knowing that patrolling coastal and river waterways during a conflict in Vietnam was going to be extremely hazardous, the U.S. Navy searched for a boat design that could be quickly produced and employed. One chosen was a fiberglass-hulled pleasure craft built by Modutec Marine in Seattle Washington. The Patrol Boat, River or PBR as it was known militarily, became one of the most successful weapons systems used in Southeast Asia. It was 31″ 11″ long ; 11; 7″ wide, and 9″9″ high above the waterline. It displaced 8 3/4 tons loaded drawing two feet of water. It’s crew of four was armed with a pair of .50 cal gun or grenade launcher mounted on a tripod in the fantail, plus a single M-60 on a pipe mount bolted to one of the amidships splinter shields. It was powered by two turbocharged Detroit Diesel 205 HP, V-6 marine engines, driving a pair of Jaccuzzi 14JY water jetdrives. The engines were located underneath the aft decking, and the boat was steered by two movable nozzles below the water line, mounted on the rear transom. The water intakes were located on the hull bottom. It had a top speed in excess of 25 knots. Surface radar and two-way radio equipment provided communication and maneuvering safety. This high-speed, heavily armed small craft was used heavily by U.S. forces in the Mekong Delta region. It is recreated with aplomb in this plastic model assembly kit, with details accurately captured from the hull form to the interior. The lethal 12.7mm and 7.62mm machine guns, plus the 40mm grenade launcher are realistically depicted along with a host of accessories such as jerry cans, plus 4 figures. ​​​​​

Tamiya 60747 - 1/72 De Havilland Mosquito FB Mk.VI/NF Mk.II Plastbyggesett ★Dette er et monteringssett i plast i skala 1/72,  Flykroppens lengde: 175 mm, vingespenn: 229 mm. De Havilland «Mosquito», laget av tre, ble designet basert på «høyhastighetsbombefly som rister av et jagerfly». Designet til Mosquito ble utformet i 1939. De Havilland hadde tidligere erfaring med å produsere «DH88 Comet» laget av tre, derfor var de oppmerksomme på at overflaten på trevingene kunne bli glatt behandlet og mengden aluminium kunne spares. To Rolls Royce Merlin-motorer ble valgt som kraftkilde, og tre ble brukt som materiale til flykroppen. Delene med metall var bare deler av motorens periferi og landingsunderstellet. I starten var Luftfartsdepartementet passivt og tok i bruk Mosquito på grunn av tre og ingen maskingevær. Mosquitoen gjennomførte imidlertid en jomfrutur med en maksimal hastighet på 630 km, mens «Spitfire» hadde en maksimal hastighet på 580 km på den tiden. Derfor ble det plutselig etterspørsel etter mange «Mosquito». Etter at mange typer Mosquito ble produsert, ble Night-Fighter Mk. II bevæpnet med 7,7 mm maskingevær på nesen og A.I.Mk.IV-radar dukket opp. Denne Mosquito-flyet utnyttet sine evner til å angripe en flyplass og avskjære bombefly som ranet. Kampbombeflyet Mk. VI, bevæpnet med fire 225 kg bomber og åtte rakettbomber, ble også arrangert som selve kampene i mars 1943. Denne typen skapte kaos for landstyrkene, slagskipene og ubåtene. Videre var den aktiv i angrepet på jernbanen og broen ved den burmesiske frontlinjen, noe som ga den japanske hæren et slag. Mosquito-flyets trekonstruksjon var sterk mot å bli beskutt, og holdt derfor en etablert posisjon mot pilotene med spesialoppdraget.   

Tamiya 60753 - 1/72 De Havilland Mosquito B Mk.IV/PR Mk.IVPlastbyggesett ★Dette er et monteringssett i plast i skala 1/72,  Flykroppens lengde: 172.5 mm, vingespenn: 229 mm. De Havilland «Mosquito», laget av tre, ble designet basert på «høyhastighetsbombefly som rister av et jagerfly». Designet til Mosquito ble utformet i 1939. De Havilland hadde tidligere erfaring med å produsere «DH88 Comet» laget av tre, derfor var de oppmerksomme på at overflaten på trevingene kunne bli glatt behandlet og mengden aluminium kunne spares. To Rolls Royce Merlin-motorer ble valgt som kraftkilde, og tre ble brukt som materiale til flykroppen. Delene med metall var bare deler av motorens periferi og landingsunderstellet. I starten var Luftfartsdepartementet passivt og tok i bruk Mosquito på grunn av tre og ingen maskingevær. Mosquitoen gjennomførte imidlertid en jomfrutur med en maksimal hastighet på 630 km, mens «Spitfire» hadde en maksimal hastighet på 580 km på den tiden. Derfor ble det plutselig etterspørsel etter mange «Mosquito». Etter at mange typer Mosquito ble produsert, ble Night-Fighter Mk. II bevæpnet med 7,7 mm maskingevær på nesen og A.I.Mk.IV-radar dukket opp. Denne Mosquito-flyet utnyttet sine evner til å angripe en flyplass og avskjære bombefly som ranet. Kampbombeflyet Mk. VI, bevæpnet med fire 225 kg bomber og åtte rakettbomber, ble også arrangert som selve kampene i mars 1943. Denne typen skapte kaos for landstyrkene, slagskipene og ubåtene. Videre var den aktiv i angrepet på jernbanen og broen ved den burmesiske frontlinjen, noe som ga den japanske hæren et slag. Mosquito-flyets trekonstruksjon var sterk mot å bli beskutt, og holdt derfor en etablert posisjon mot pilotene med spesialoppdraget.  Den allsidige «Myggen» sto sammen med Spitfire-jagerflyet og Lancaster-bombeflyet og den fikk respekt av britiske piloter under andre verdenskrig. I 1939 så De Havilland-selskapet at flyet skulle være ett ubevæpnet høyhastighetsbomber, de hadde erfaring med kometen, som var et racingfly av tre.  

Tamiya 60753 - 1/72 Supermarine Spitfire Mk.Vb/Mk.Vb TROP ★Dette er et monteringssett i plast i skala 1/72,  Flykroppens lengde: 128 mm, vingespenn: 156 mm. Dette er et monteringssett i plast i skala 1:72 som viser Mk.Vb, den mest produserte varianten av Spitfire. Fra den elegante helhetsformen til Mk.Vb-spesifikke funksjoner som den 20 mm kanonutstyrte vingen, er flyets form fanget med stil. Modellen kan settes sammen med forskjellige vingedesign. Leveres med to typer frontkalesje og tre typer bakre kalesjedeler. Deler er inkludert for å gjenskape de spesielle luftfiltrene som ble sett på TROP-varianter som ble utplassert i tropiske klimaer. Leveres med fire merkingsalternativer og en displaybase.  

Tamiya 60789 - 1/72 Kawasaki Ki-61-Id HIEN (TONY) Plastbyggesett I desperat forsvar Kawasaki Ki-61-Id Hien ble offisielt tatt i bruk av den keiserlige japanske hæren (IJA) i 1943, og skilte seg ut blant sine samtidige japanske fly i Stillehavskrigen på grunn av sin væskekjølte Ha-40-motor, slanke flykropp og lange, elegante vinge. En rekke forskjellige varianter ble produsert, blant dem Ki-61-Id som hadde en 20 cm forlenget nese for å huse 20 mm kanoner, pluss 12,7 mm maskingevær i vingen. Faktisk, med 1360 enheter var det den mest produserte Hien-varianten; dens overlegne ytelse i høyere høyder betydde at den ofte fikk i oppgave å ta imot innkommende amerikanske B29-bombefly. ★Dette er et monteringssett i plast i skala 1:72. Lengde på flykroppen: 125 mm, vingespenn: 167 mm. ★Modellen gjengir nøyaktig Ki-61-Id Type Hien med forlenget nese og slank flykropp. ★Komplekse luftinntakslameller under flykroppen er kunstferdig avbildet i én del. ★Har imponerende detaljer i cockpiten og landingsunderstellet. ★Leveres med 3 merkealternativer, inkludert 244.Airgroup ★Marking option included for understated 19th Air Group Hien with dark green upper surfaces and unpainted underside.   ★A comprehensive set of decals features no less than three marking options for the modeler to choose from.   ★The distinctive mottled camouflage and bright tail of 244th Air Group Commander Shunzo Takashima is also on offer.   Item 12683 1/72 Kawasaki Ki-61-Id Hien (Tony) Camouflage Decals Now you can recreate with ease the complex mottled camouflage seen on some versions of the aircraft, thanks to this handy decal sheet (sold separately). 5 decals are used, each covering a section: left/right wings, fuselage left/right, and antenna. This set is perfect for those without the time to tackle a complex paint job.   .

Tamiya 61027 - 1/48 A6M5c Type 52 Zero Fighter (ZEKE) Plastbyggesett ★Dette er et monteringssett i plast i skala 1/48. Flykroppens lengde: 190 mm, vingespenn: 229 mm.  I april 1939, kort tid etter at den første japanske Zeroen startet testforsøkene, var det allerede påbegynt modifikasjonstegninger på Zeroen i Mitsubishis designrom for å holde tritt med den forventede lange luftkrigen i Stillehavet. Etter at Zeroens første overlegenhet over allierte fly begynte å avta på grunn av introduksjonen av nye amerikanske typer, hadde Mitsubishi store problemer med å opprettholde overlegenheten. Introduksjonen av Grumman F6F og Chance Vought F4U ga et behov for mer ildkraft, panserbeskyttelse og kapasitet, noe som førte til at de kombinerte selskapene Nakajima og Mitsubishi produserte A6M5-serien av fly. Total produksjon av Type 52-serien besto av 10 449 fly, hvorav Nakajima produserte 6570. Den gikk først i kamp i august 1943, på et tidspunkt da de japanske styrkene trakk seg tilbake fra tidligere holdte øyer i Sør-Stillehavet. Type 52c var den siste i A6M5-serien, og den mest effektive mot allierte fly på grunn av dens våpenkonfigurasjon – tre av 13 mm maskingevær og to 20 mm kanoner. Totalt 93 Type 52 og 52b Zero-er ble feltmodifisert til «c» våpenkonfigurasjon. 7,7 mm maskingeværene, som har vært plassert i motordekselet på Zero-en siden den første introduksjonen, viste seg å være mindre effektive i de siste stadiene av konflikten på grunn av den tyngre pansringen til allierte fly og deres selvtettende drivstofftanker. 13 mm våpenet var mye mer effektivt; på grunn av den økte vekten kunne imidlertid bare ett av dem plasseres i motordekselet og ett i hver vinge. 7,7 mm maskingeværene ble fjernet fra motordekselet, og ett 13 mm kanon ble montert på høyre side. Denne installasjonen gjorde det også nødvendig å forstørre prosjektilutgangen og motordekselrørinngangen på motordekselet, noe som ga det et ubalansert utseende sett ovenfra. Type 52c, som de allierte kalte «Zeke», ble drevet av en 14-sylindret to-raders NK1F Sakae 21-motor på 1130 hk, hvorav senere versjoner var alkoholinnsprøytet. I tillegg til maskingeværene og kanonene kunne 52c også frakte fire luft-til-luft-raketter eller fire 30 kg luft-til-luft-bomber eller to 60 kg konvensjonelle luft-til-bakke-bomber. Luft-til-luft-systemene ble startet i et forsøk på å forstyrre B-29-operasjoner ved å avfyre ​​rakettene eller slippe de små bombene på formasjonene. Bombene var tidsinnstilt til å sprenge et visst antall sekunder etter at de ble utløst av jagerflyene. Send tilbakemelding  

Tamiya 61034 - 1/48 Grumman F4F Wildcat Plastbyggesett ★Dette er et monteringssett i plast i skala 1/48. Flykroppens lengde: 184 mm, vingespenn: 242 mm.  Grumman F4F Wildcat var den amerikanske marinens viktigste jagerfly fra begynnelsen til midten av andre verdenskrig, og dette settet viser F-4-varianten. Flyets buttede, robuste form er nøyaktig gjengitt og har en kombinasjon av hevede og graverte detaljer. Sett den opp mot A6M2 Zero for en fremvisning av rivaler fra andre verdenskrig.  

Tamiya 61040 - 1/48 North American P-51D Mustang 8th AF Plastbyggesett ★Dette er et monteringssett i plast i skala 1/48. Flykroppens lengde: 205 mm, vingespenn: 236 mm.  I april 1940 ble det skissert tegninger på et hotellrom i New York City for et nytt jagerfly for den britiske innkjøpskommisjonen. Dette jagerflyet, North American NA73X, ble et av de beste jagerflyene i det amerikanske flyvåpenet under andre verdenskrig, og er kjent som P-51 Mustang. Av de mange variantene av dette berømte jagerflyet er P-51D generelt akseptert som den definitive Mustangen og var den første produksjonsversjonen med «Bubble»-kalesje. Flere «D»-modell Mustanger ble bygget enn alle andre Mustang-varianter til sammen, med totalt 9603 som kom ut av produksjonslinjene. 45 skvadroner fra det berømte amerikanske 8. luftforsvaret, stasjonert i England, var utstyrt med P-51D, som nå kunne eskortere og beskytte de tunge bombeflyene hele veien til og fra mål på det europeiske kontinentet. Det var flere store endringer som skilte «D» fra tidligere Mustanger. En var endringen fra fire .50 kaliber maskingevær til seks, tre i hver vinge. En annen var å montere kanonene oppreist, noe som bidro til å eliminere en tendens til fastkjøring som oppsto i firekanonsystemet. Ammunisjonen ble økt til 400 skudd per innenbordskanon, og 270 skudd for hver av de fire andre. Undervingemastene ble forsterket for å bære de 110 eller 165 gallon hjelpe-droptankene eller 1000 lb-bomben. P-51D Mustang-fly dro i kamp i den senere Korea-konflikten, og den fløy sist kamp i 1956 i ørkenene til Midtøsten, da Israel brukte Spitfires, Messerschimits og Mustangs sammen i Midtøsten-konflikten.  

Tamiya 61094 - 1/48 Brewster B-339 Buffalo "Pacific Theater" Plastbyggesett ★Dette er et monteringssett i plast i skala 1/48. Flykroppens lengde: 163 mm, vingespenn: 223 mm.  Klassisk 1/48 Brewster Buffalo! Etter lanseringen av en amerikansk marineversjon av Brewster Buffalo i 1993, lanserer Tamiya nå B-339 eksportversjonen av Buffalo som ble brukt av Royal Air Force og Netherlands East Indies Army Air Corps under andre verdenskrig. Settet leveres med nye deler som kalesje, propell, sete og dekaler for å nøyaktig gjengi Buffalo-flyet som ble brukt i hele Sørøst-Asia. Inkluderer også deler for å gjengi den amerikanske marineversjonen med grå flykropp. Buffalo ble først utviklet i 1935 som et hangarskipbasert jagerfly for den amerikanske marinen. Med et moderne monoplandesign i midten av vingene, lukket cockpit og uttrekkbart landingsunderstell fikk den første masseproduserte Buffalo-flyet navnet F2A-1, som kort tid etterfulgt ble av den forbedrede F2A-2. B-339 Buffalo, basert på den amerikanske marinens Buffalo, var kun for eksport og var utstyrt med en eksportgodkjent Wright Cyclone-motor på 1100 hk og redesignet for landbruk med fjernet marineutstyr som redningsflåte og arrestorkrok. Det kongelige luftforsvaret (RAF) og det nederlandske østindiske arméflykorpset (ML-KNIL) brukte B-339 til å beskytte koloniale utposter i Malaysia, Singapore og Java under andre verdenskrig. Om modellen: Svært detaljert monteringssett i skala 1/48 av Brewster B-339 Buffalo. Total lengde: 163 mm, vingespenn: 223 mm. Autentisk reprodusert stort flykropp og unikt landingsunderstell. Settet inneholder deler for nøyaktig å gjengi RAF-, ML-KNIL- eller amerikanske marinefly. Nye deler som baldakin, bakre flykropp og propell er autentisk gjengitt med høy detaljkvalitet. Inkluderer et komplett utvalg av tilbehør, inkludert to 100-pundsbomber, én sittende pilotfigur og én stående figur, og markeringer for å reprodusere et valg av fire forskjellige fly.  

Tamiya 78013 - German Bismarck Battleship Kit 1/350 【 The German Navy's Most Powerful Warship 】 The hunt for the Bismarck is one of the most famous and well-known epics in naval combat history, and Tamiya now brings you this legendary battleship as an exquisite 1/350 scale assembly kit display model. The ship's distinctive silhouette and powerful armament are all meticulously and accurately reproduced. A special display stand and beautifully crafted nameplate are also included for an awe-inspiring display. This is a 1/350 Plastic German Battleship Bismarck from Tamiya. It's for ages 10 and up. On May 24th, 1941 the Royal Navy dealt one of its most shattering blows. The 42,000 ton German battlecruiser Hood was destroyed after an attack that lasted only eight minutes. The Bismarck was the largest and most modern ship in service with the German fleet. Three days after the most celebrated sea chase of the Second World War, which involved no fewer that three British battleships, two battlecruisers, two aircraft carriers, nine cruisers, and countless destroyers, the Bismarck was reduced to a blazing hulk. This came only nine months after she was commissioned.       FEATURES Plastic pieces attached to sprues and molded in gray. Ready to assemble precision model kit. Exterior surface of hull is covered with minute engraved details. The deck of the ship is brimming with startling details like: -Railings and windows -Huge turrets -Cranes -Lights -Life boats -Ladders and stairs RE-280 Motor is not included. If you can't afford to build your own 41,700 ton battleship but still want one, then pick up this highly accurate model. A large plastic stand with a "Bismarck" nameplate is included for display purposes. Detailed pictorial instructions.     INCLUDES One 1/350 Plastic German Battleship Bismarck     REQUIREMENTS Assembly Cement for plastics  Paint: Dark Seagrey, Dark Grey, Matt Black, Matt White, Hull Red, Light Blue, Deep Green, Matt Earth, Deck Tan Brushes RE-280 Electric Motor (optional) Batteries (optional) Sprue Cutter Screwdriver Pliers Modeling Knife File or Emery Board Glue Tips or Toothpicks Water for Decals Scissors Tweezers Adult Supervision     SPECIFICATIONS Scale: 1/350 Length: 27" (68.6cm) Width: 4-1/4" (10.7cm) Height: 3-3/4" (9.9cm) (approximately)

Tamiya 78015 - German Tirpitz Battleship Kit 1/350 【 "The Lonely Queen of the North" 】 The sole sister ship of the Bismarck, the Tirpitz was a perpetual worry for the Royal Navy since its presence in Norway was a threat to Allied convoys. Considerable resources were spent countering her potential moves until she was finally sunk by Royal Airforce bombers. Tamiya now brings you this marvel of German engineering as a highly-detailed 1/350 scale assembly kit display model. The elegant lines of the Tirpitz are accurately reproduced and distinguishing features that set her apart from the Bismarck such as quadruple torpedo tubes are also recreated in great detail. The model comes with a specially made display base and a beautiful nameplate for an impressive display.   This is the 1/350 Scale German Battleship Tirpitz Plastic Model Kit from the Ship Series by Tamiya. Suitable for Ages 14 & Up.       FEATURES Highly detailed plastic pieces molded in grey and black Detailed hull Display stand with nameplate Waterslide decals Illustrated instructions     INCLUDES One plastic model     REQUIREMENTS Assembly Hobby knife Cement for plastics  Sprue cutters  Paint (Dull Red, Wooden Deck Tan, Gunmetal, Chrome Silver, Gold Leaf, Flat Black, Flat White, Flat Red, Dark Gray, Deep Green, Flat Earth, Dark Sea Gray, Metallic Gray, Light Gray)     SPECIFICATIONS Scale: 1/350 Length: 28.22" (717mm) Beam: 4.05" (103mm)

Tamiya 78029 US Battleship BB-63 Missouri - Circa 1991 1/350 Byggesett i skala 1/350, dette er kun skipet, maling lim og diverse kommer i tillegg Spesifikasjoner : Vekt 1/1 :    45.000tonn Lengde 1/1:  270.4 meter Bredde 1/1:  32.98 meter Motorkraft 1/1: 212.000 HP Fart 1/1 : 33knop (61.11km/t)  Fargekart for modellen:   TS-32 - 100ml Haze Grey TS-33 - 100ml Hull Red TS-6 - 100ml Matt Black TS-68 - 100ml Wooden Deck Tan X-10 - 23ml Gun Metal X-10 - 10ml Gun Metal X-12 - 23ml Gold Leaf X-12 - 10ml Gold Leaf X-13 - 23ml Metallic Blue X-13 - 10ml Metallic Blue X-18 - 23ml Semi Gloss Black X-18 - 10ml Semi Gloss Black XF-1 - 23ml Flat Black XF-1 - 10ml Flat Black XF-19 - 23ml Sky Grey XF-19 - 10ml Sky Grey XF-2 - 23ml Flat White XF-2 - 10ml Flat White XF-24 - 23ml Dark Grey XF-24 - 10ml Dark Grey XF-50 - 23ml Field Blue XF-50 - 10ml Field Blue XF-52 - 23ml Flat Earth XF-52 - 10ml Flat Earth XF-56 - 23ml Metallic Grey XF-56 - 10ml Metallic Grey XF-6 - 23ml Copper XF-61 - 23ml Dark Green XF-61 - 10ml Dark Green XF-63 - 23ml German Grey XF-63 - 10ml German Grey XF-66 - 23ml Light Grey XF-66 - 10ml Light Grey

Tamiya IjN Utility Boat Set 1/350 The set includes 28 ships of 11 different types. The set also includes photo-etched parts which depict deck mounts in a realistic way for the boats. The set can be used with the new 1/350 Yamato kit as well as other 1/350 scale WWII Japanese Navy ship models.

AMT1064 - Coca Cola Bobby Allison 1972 Chevy Monte Carlo Stock Car 1:25 In 1972 Bobby Allison, one of the all-time greats of stock car racing paired-up with Coca-Cola and Chevrolet to create one of racing history’s most memorable seasons. Bobby continued to finish in the top ranks, winning on every major track from road courses to super speedways throughout his career. AMT introduces his beautiful red and gold number 12, Coca-Cola, Monte Carlo in all of its realistic detail. Now you can ride along with the thundering stockers of yesterday!