Handlekurv

..er tom!

Produsenter
Share |

Hpi Venture Toyota FJ Cruiser 1/10 4WD Crawler Gunmetal

På lager: 6
4.590,- 3.799,-
Vennligst velg

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

Hpi Venture Toyota FJ Cruiser 1/10 4WD Crawler Gunmetal 

Bilen leveres RTR med 7.2V 2000mah Nimh batteri, enkel vegglader på 300mah som lader batteriet på ca 6 timer og 4stk AA batterier, allt du trenger for å komme igang er inkludert i pakken.

Den har også den nye SC3WP3 regulatoren som takler 2-3S lipo med enkel pinplugg programmering og Hill Decent Control og 35T Crawler Spec 540 motor. Chassiet har også mulighet for kortere hjulbase, du kan velge mellom 290mm eller 315mm. 
Radioutstyret er velkjent TF-41 med WP motaker for sikker bruk i fuktige omgivelser.

Ved bruk av std stickpack batterier 4kant må tverrstag på batteriholder fjernes da batteriholder er tilpasset såkalte Round Courner batteri.

 Mere info fra produsent

 

Venture Toyota FJ Cruiser Gunmetal/Sandstorm
An all-new platform for scale crawling fanatics, the Venture combines a realistic front-motor position, metal chassis rails and realistic drivetrain with the Toyota FJ Cruiser for a fantastic off-road experience only HPI can deliver! With a licensed replica body that includes front and rear bumpers, mirrors, roof rack and rear tire mount, the Venture brings total scale realism to crawler fans. Underneath the body, the metal chassis rails support a front-mounted motor, central transfer case, telescoping driveshafts and solid axles with metal suspension pieces. Authentically scaled oil-filled shock absorbers and full-time locked differentials work with the tires for confident driving in any off-road environment. Join the Venture Facebook group for exclusive pictures and discussion with other scale crawler fans!


 

SPECIFICATION


DIMENSIONS

  • Length: 527mm (20.7")
  • Width: 227mm (9")
  • Height: 238mm (9.4") with roof rack, 217mm (8.5") without (will vary depending on tire choice and suspension settings)
  • Wheelbase: 311mm (12.3")
  • Front overhang: 101mm (3.9")
  • Rear overhang: 135mm (5.3")

WEIGHT

  • Running weight: 2.4kg (5.3lbs)
  • Weight without battery: 2.1kg (4.7lbs)
  • Body Weight: 0.21kg (7.44oz)

CAPABILITY

  • Break-over angle: 44.5 degrees
  • Approach angle: 55 deg
  • Departure angle: 45.5 deg
  • Max climb angle: 49 deg
  • Max tilt angle: 28 deg
  • Axle articulation: 30 deg
  • Ground clearance 68mm capable: (2.7")
  • Ground clearance at standard ride height 60mm: (2.4")
  • Axle ground clearance 32mm: (1.3") 

GEARING

  • Drivetrain ratio: 7.6:1
  • Transmission gearing: 1.53:1
  • Axle gearing: 3.31:1
  • Transfer case gearing: 1.5:1

Les mer: https://www.hpiracing.com/en/kit/116558

Kommentarer

HPI-105805 - Slipper

HPI-105805 - Slipper

HPI-105805 - Slipper Clutch Plate/Pad Set Savage XS Genuine HPI quality spare part for …

55,-



HPI-105809 - Idler Gear

HPI-105809 - Idler Gear

HPI-105809 - Idler Gear 32T-60T Use this idle gear to lower the gear ratio of your …

125,-



HPI-105811 - Drive Gear

HPI-105811 - Drive Gear

HPI-105811 - Drive Gear 49T Savage XS THIS PART FITS THE FOLLOWING KITS / PARTS: RTR …

59,-



HPI-105817 Slipper Hub

HPI-105817 Slipper Hub

 HPI-105817 Slipper Hub Set Savage XS  …

49,-



HPI-6819 - Silicone

HPI-6819 - Silicone

HPI-6819 - Silicone O-Ring P-3 (red) 5pcs This is a Package of Red P-3 Silicone O-Rings …

29,-



HPI-Z728 Set Screw

HPI-Z728 Set Screw

HPI-Z728 Set Screw M4x20mm - 4pcs THIS PART FITS THE FOLLOWING KITS / PARTS: Crawler …

35,-



HPI-106720 Slipper Nut

HPI-106720 Slipper Nut

HPI-106720 Slipper Nut 10mm/Spring Set Savage XS, Savage XS SS Kit  THIS PART FITS …

45,-