Deler Traxxas TRX-4M

2821 - 2S 750mah 20C Lipo batteri TRX-4M Batteri med TRX-4M iD plugg kun for bruk sammen med lader for TRX4-M Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top speeds that Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer way to charge your Traxxas batteries. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Replacement part for these models: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

2822 - 2S 1000mah 20C Lipo Batteri TRX-4M Batteri med TRX-4M iD plugg kun for bruk sammen med lader for TRX4-M Traxxas-sertifiserte iD-utstyrte® LiPo-batterier gir kraft på forespørsel for å oppnå maksimal ytelse Traxxas-modeller er bygget for å levere. Traxxas' eksklusive iD-batterisystem er den enkle og tryggere måten å lade Traxxas-batteriene på. Bare Traxxas gir deg mer av det du ønsker deg mest: enkel installasjon, en god pris og mest mulig hastighet og driftstid. Tilbehørel for disse modellene: TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender® ADVARSEL: Dette produktet kan utsette deg for kjemikalier, inkludert koboltoksid, som er kjent for staten California for å forårsake kreft. For mer informasjon, gå til www.P65Warnings.ca.gov. Type Total kapasitet Spenning C-vurdering LiPo 1000 mAh 7,4 V 20 C  

6250 - Børsteløst Motorsystem FOC for TRX-4M TRX-4M® børsteløst motorsystem gir deg opptil 50 % mer hastighet, mer moment og større presisjon enn børstede motorsystemer. Kjør wheelies i monstertrucken din eller naviger deg gjennom en teknisk crawlerbane i din tilpassede High Trail-rigg®. Det nye TRX-4M børsteløse motorsystemet gir deg det beste fra begge verdener! Børsteløs Outrunner-motor I hjertet av systemet er den helt nye 3350Kv børsteløse outrunner-motoren. Den børsteløse motoren er designet for 2s LiPo batteri, og tilbyr eksepsjonelt dreiemoment og lav hastighetskontroll for å klatre over enhver hindring. I det fri leverer motoren ytelse på høyt turtall for dramatisk forbedret hastighet og wheelie-popping-kraft. En svart høyglanslakkering med laseretsing gir motoren et slående utseende. Børsteløs ECM Den nye børsteløse ECM tilbyr alle de samme flotte funksjonene som standard ECM, men med enda mer kompatibilitet. Den integrerte lysstyringsmodulen og mottakeren opprettholder all eksisterende funksjonalitet med eksisterende Pro Scale-lyssett® og fungerer med både TQ- og TQi-sendere. Ny feltorientert kontrollprogrammering (FOC) gjør det mulig for ESC å overvåke motorens posisjon for ultrapresis kontroll. Den børsteløse ECM tilbyr to servoutgangsporter og to Pro Scale-belysningsporter og bruker til og med de samme batteritilkoblingene og monteringsfestene for ekte plug-and-play-kapasitet. Brushless Power System Funksjoner: ­ Børsteløs Outrunnermotor Mer dreiemoment og lav hastighetskontroll enn konvensjonelle konstruksjoner 3350 Kv Laseretset motor med høyglans lakkering Inkluderer 11-tanns tannhjul Børsteløs ECM Beholder alle standard ECM-funksjoner, inkludert Pro Scale-lyskontroller Feltorientert kontroll (FOC) Kompatibel med 2s LiPo-Batteri Fungerer med både TQ™- og TQi-sendere™ Tre kjøremoduser: Sport (100 % FWD, 100 % brems, 100 % REV) Trail (100 % FWD, 100 % brems, 100 % REV, stijustert brems i nøytral) Kryp 100 % FWD, 100 % øyeblikkelig REV, 100 % brems i nøytral) Samme kontakter og monteringspunkter Ekte plug-and-play-kompatibilitet BEC servo 5.6V 1A

6253 - Børsteløs Motor FOC for TRX-4M (6250) Børsteløs Outrunner-motor 350Kv børsteløs outrunner-motor. Den børsteløse motoren er designet for 2s LiPo batteri, og tilbyr eksepsjonelt dreiemoment og lav hastighetskontroll for å klatre over enhver hindring. I det fri leverer motoren ytelse på høyt turtall for dramatisk forbedret hastighet og wheelie-popping-kraft. En svart høyglanslakkering med laseretsing gir motoren et slående utseende. For bruk sammen med ECM 6254    ­ Børsteløs Outrunnermotor Mer dreiemoment og lav hastighetskontroll enn konvensjonelle konstruksjoner 3350 Kv Laseretset motor med høyglans lakkering Inkluderer 11-tanns tannhjul

6516 - Fjernkontroll TQ 2 kanaler 2.4GHz (Kun Radio) (1) Ny, utplukket fra bil. Switch on the power and drive! That's all there is to it with the TQ™ 2.4 GHz radio. There are no frequencies to manage, so the focus is on having fun. Race multiple vehicles side by side without interference. The TQ's advanced programming provides long-range control with smooth, glitch-free performance. Ergonomic design makes the TQ comfortable for all day driving with an internal antenna that is impervious to damage. (Receiver sold separately.)

7028X - Hollow Balls Steel  Machined TRX-4M (22) Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. The steel hollow balls are direct replacements for the standard plastic hollow balls. Lengde : 4.95mm Ø utvendig : 4.45mm Ø Innvendig : 2.4mm Replacement part for these models: 1/16 E-Revo® Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ 1/18 Ford® Bronco® 1/18 Land Rover® Defender® Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck

9236 - Skruer Selvborende Hex buttonhead 1.6x10mm (6) Screws, 1.6x10mm button-head, self-tapping (hex drive) (6) Set of six 1.6x10 mm button-head self-tapping screws with hex drive heads Replacement part for these models: TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Ford® F-150® High Trail Edition™

9711- Umontert Ulakkert Karosseri 1/18 TRX-4M Ford Bronco Body, Ford Bronco, complete (unassembled) (white, requires painting) (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) Give your TRX-4M™ a custom look with this white unpainted Bronco body, You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Bodies come unassembled for painting, but include body accessories and mounting hardware. Spesifikasjoner: Lengde : 255mm Bredde : 110mm Front/Bak (Inkl Skjermutbyggere), 105mm Midten Høyde : 83mm med Takrail Hjulbase : 155mm Skala : 1/18

9711-CMPL - Karosseri 1/18 TRX-4M Ford Bronco Komplett Body, Ford Bronco, complete, (includes grille, side mirrors, door handles, fender flares, windshield wipers, spare tire mount, & clipless mounting) TRX-4M™ clipless bodies come ready to mount on your 1/18 scale truck right out of the bag. Constructed out of tough ABS plastic, the TRX-4M bronco body faithfully captures all the details of the full-size Ford® Bronco in exacting 1/18 scale. Tinted windows, a spare tire carrier, rugged fender flares, side mirrors, and other molded body accessories give TRX-4M a truly authentic appearance. Just snap one onto your TRX-4M chassis and you're ready for fun and adventure! Spesifikasjoner: Lengde : 255mm Bredde : 110mm Front/Bak (Inkl Skjermutbyggere), 105mm Midten Høyde : 83mm med Takrail Hjulbase : 155mm Skala : 1/18

9712- Umontert Ulakkert Karosseri 1/18 TRX-4M Land Rover Defender Body, Land Rover® Defender®, complete (unassembled) (white, requires painting) (includes grille, side mirrors, door handles, fender flares, fuel canisters, jack, spare tire mount, & clipless mounting) Give your TRX-4M™ a custom look with this white unpainted Defender body, You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Bodies come unassembled for painting, but include body accessories and mounting hardware. Spesifikasjoner: Lengde : 265mm Bredde : 108mm Front/Bak (Inkl Skjermutbyggere), 102mm Midten Høyde : 96mm med Takrack Hjulbase : 155mm Skala : 1/18

9712-CMPL - Karosseri 1/18 TRX-4M Land Rover Defender Komplett Body, Land Rover® Defender®, complete, (includes grille, side mirrors, door handles, fender flares, fuel canisters, jack, spare tire mount, & clipless mounting) TRX-4M™ clipless bodies come ready to mount on your 1/18 scale truck right out of the bag. Constructed out of tough ABS plastic, the TRX-4M Defender body faithfully captures all the details of the full-size Land Rover® Defender® in exacting 1/18 scale. Tinted windows, a spare tire carrier, rugged fender flares, side mirrors, and other molded body accessories give TRX-4M a truly authentic appearance. Just snap one onto your TRX-4M chassis and you're ready for fun and adventure! Spesifikasjoner: Lengde : 265mm Bredde : 108mm Front/Bak (Inkl Skjermutbyggere), 102mm Midten Høyde : 96mm med Takrack Hjulbase : 155mm Skala : 1/18

9713- Karosseriramme 1/18 TRX-4M Ford Bronco TRX-4m™ Ford® Bronco body frame with fender flares and spare tire mount. (Fits 9711-series bodies) Replacement part for these models: 1/18 Ford® Bronco®

9714 - Vinduer 1/18 TRX-4M Ford Bronco Clear windows for the 9711-series TRX-4m™ Ford® Bronco body Replacement part for these models: 1/18 Ford® Bronco®

9715 - Takrails-Grill-Reservehjulsbeskytter 1/18 TRX-4M Ford Bronco Body accessories for the TRX-4m™ Ford® Bronco body include roof rack, spare tire cover, cowl, and grille. (Fits 9711-series Bronco body) Replacement part for these models: 1/18 Ford® Bronco®

9716 - Tak Sort 1/18 TRX-4M Ford Bronco Black roof for the 9711-series TRX-4m™ Ford® Bronco body Replacement part for these models: 1/18 Ford® Bronco®

9717 - Trail Sights-Dørhåndtak-Lampebeskytter Støtfanger 1/18 TRX-4M Ford Bronco Body accessories for the TRX-4m™ Ford® Bronco body include trail sights, door handles, and bumper covers. (Fits 9711-series Bronco body) Replacement part for these models: 1/18 Ford® Bronco®

9718 - LED Linser Set 1/18 TRX-4M Ford Bronco Front and rear LED lenses for the 9711-series TRX-4m™ Ford® Bronco body Replacement part for these models: 1/18 Ford® Bronco®

9719 - Front and rear LED lenses for the 9712-series TRX-4m™ Land Rover® Defender® body LED lenses, headlight (2), tail light (2) (fits #9712 body)   Accessory part for these models:   1/18 Land Rover® Defender®

9720 - Dekaler-Grill-Speil++ 1/18 TRX-4M Land Rover Defender Body accessories for the TRX-4m™ Land Rover® Defender® body include grille, side mirrors, spare tire cover, light retainers, and decals. (Fits 9712-series Defender body) Replacement part for these models: 1/18 Land Rover® Defender®

9721 - Jerrykanne-Jekk 1/18 TRX-4M Land Rover Defender Red replica fuel canisters for the TRX-4m™ Land Rover® Defender® body. (Fits 9712-series Defender body) Replacement part for these models: 1/18 Land Rover® Defender®

9722 - Rammevanger Stål 202mm TRX-4M Chassis rails, 202mm (steel) (left & right) Left and right TRX-4m™ steel frame rails Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9724 - Karosseriramme 1/18 TRX-4M Land Rover Defender TRX-4m™ Land Rover® Defender® body frame with fender flares. (Fits 9712-series bodies) Replacement part for these models: 1/18 Land Rover® Defender®

9725 - Vinduer 1/18 TRX-4M Land Rover Defender Clear windows for the 9712-series TRX-4m™ Land Rover® Defender® body Replacement part for these models: 1/18 Land Rover® Defender®

9726 - Støtdempertårn F/B + Batterikasse TRX-4M Front and rear shock mounts with battery tray Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9727 - Batteri Stropp TRX-4M  Batteristropp i gummi Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9728 - EXO Cage med Takrails1/18 TRX-4M Land Rover Defender TRX-4m™ Land Rover® Defender® ExoCage with left and right sides. (Fits 9712-series bodies) Replacement part for these models: 1/18 Land Rover® Defender®

9729 - Stikk Akslinger Indre Foran Stål TRX-4M (2) Stikkakslinger indre Foran Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9729X - Stikk Aksling Indre Foran Herdet Stål TRX-4M (1) The heavy-duty front axle shaft is made from high-grade hardened steel for maximum strength and durability. Sold individually. (Shaft is a direct replacement for the 9756 axle set, or an upgrade for standard axles) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9730 - Stikk Akslinger Yttre Bak Stål TRX-4M (2) Replacement rear axle shafts fit left or right Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9730X - Stikk Aksling Yttre Bak Herdet Stål TRX-4M (1) The heavy-duty rear axle shaft is made from high-grade hardened steel for maximum strength and durability. Sold individually. (Shaft is a direct replacement for the 9756 axle set, or an upgrade for standard axles) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9731 - Karosseri Tilbehør 1/18 TRX-4M Land Rover Defender Body accessories for the TRX-4m™ Land Rover® Defender® body include front light mounts & retainers, front bumper, snorkel, and spare tire mount. (Fits 9712-series Defender body) Replacement part for these models: 1/18 Land Rover® Defender®

9732 - Steering Blocks, Left & Right/ Caster Blocks (C-Hubs), Left or Right (2) Left and right steering blocks and caster blocks Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9733 - Caster Blocks Messing 4gram Hver 1/18 TRX-4M  Høyre og Venstre C hub i messing for TRX-4M bilene  Tilbehørsdel for disse modellene: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 18/1 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9734 - Støtfanger Foran-Bak 1/18 TRX-4M Land Rover Defender Front and rear bumpers for the TRX-4m™ Land Rover® Defender® Replacement part for these models: 1/18 Land Rover® Defender®

9735 - Støtfanger Foran/Bak 1/18 TRX-4M Ford Bronco Front and rear bumpers for the TRX-4m™ Ford® Bronco Replacement part for these models: 1/18 Ford® Bronco®

9736 - Skidplate Center, Bumper Mount Front/Rear Center skid plate with front and rear bumper mounts Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9737 - Svingarmer Messing 7gram Hver 1/18 TRX-4M  Høyre og Venstre Svingarm i messing for TRX-4M bilene  Left and right brass steering blocks add 7 grams of valuable weight to the lowest part of your TRX-4m™ for improved anti-rollover stability and superior rock-climbing capability. The steering blocks are carefully machined to preserve TRX-4M’s trail-tuned steering and suspension geometry. Includes 2.5x12 mm screws (2) and 2x6 mm Tilbehørsdel for disse modellene: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 18/1 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9738 - Axle Cover Front and Rear Axle cover, front or rear (2) Give your TRX-4M™ a custom look with these black chrome axle covers. Sold as a pair. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9739 - Servo Mount, Steering/Servo horn TRX-4M Steering servo mount with servo horn Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9739-OPT - Servo Mount 6061-T6 Aluminium Servo mount, 6061-T6 aluminum Eliminate flex and increase steering precision in your TRX-4M™ by adding this aluminum servo mount. The mount is made from high-grade 6061-T6 aluminum for maximum strength and durability and then brightly anodized for a stylish look. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9740 - Servohorn Metall TRX-4M 25T Splines Servohorn i metall for bl.a TRX-4M bilene, dette har std 25T Splines. 2.5mm skrue Eliminate flex and increase steering precision in your TRX-4M™ by adding this metal servo horn. Accessory part for these models: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9741 - Akselhus F/B TRX-4M Axle housing, front & rear Front and rear axle housings (Case only - no internal parts) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9742R - Lenkearmsett Komplett Montert TRX-4M TRX-4m™ suspension link set includes steering link, front lower links (2), front upper links (2), and rear links (4). Links come assembled with hollow balls and ready to install. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9743 - Front Aksel Komplett Pro Built TRX-4M Axle, front (assembled)/ M2.5x0.45 NL (2) Pro Built® front axles come professionally assembled and ready to install in your TRX-4M™. Axles come complete with metal half shafts, caster blocks, steering blocks, bushings, wheel hubs, and wheel nuts. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9744 - Bak Aksel Komplett Pro Built TRX-4M Axle, rear (assembled)/  M2.5x0.45 NL (2) Pro Built® rear axles come professionally assembled and ready to install in your TRX-4M™. Axles come complete with metal half shafts, bushings, wheel hubs, and wheel nuts. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9745 - Bøssingsett Selvsmørende Komplett TRX-4M Restore the full performance of your TRX-4M™ with a set of brand new self-lubricating bushings. The set includes the following bushings: 3x6x2.5 mm (8), 5x8x2.5 mm (4), 4x8x3 mm (4), 8x12x3.5 mm (2), 3.5x7x2.5mm (4). Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

99745X - Kulelagersett TRX-4M Ball bearing set, black rubber sealed, complete (3x6x2.5mm (8), 5x8x2.5mm (4), 4x8x3mm (4), 8x12x3.5mm (2), 3.5x7x2.5mm (4)) Reduce friction and increase the precision of your TRX-4M™ by replacing the stock bushings with these high-quality black-seal bearings. Black-seal bearings offer ultimate protection from the elements with less maintenance in dirty environments. Includes 3x6x2.5 mm bearings (8), 5x8x2.5 mm bearings (4), 4x8x3 mm bearings (4), 8x12x3.5 mm bearings (2), and 3.5x7x2.5 mm bearings (2). Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9746X - Skruesett Stainless Steel TRX-4M Hardware kit, complete (contains all hardware used on 1/18-scale Ford® Bronco® or Land Rover® Defender®) (includes clear plastic storage container)   Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9746X - Skruesett Stainless Steel TRX-4M Hardware kit, stainless steel, complete (contains all stainless steel hardware used on 1/18-scale Ford Bronco or Land Rover® Defender®) (includes body hardware and clear plastic storage container) The TRX-4m™ stainless hardware kit replaces all the screws used on the TRX-4m Ford® Bronco and Land Rover® Defender® with high-quality rust-resistant stainless Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9747 - Girkassehus TRX-4M Front and rear gearbox halves with 2x4 mm screws (2), 2x8 mm screws (2), 3x16 mm pins (2), and 3x6x2.5 mm self-lubricating bushings (6). Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9747X - Girkasse Aksel Utgående TRX-4M Transmission output shaft Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9748 - Steering Link 6061-T6 Aluminium w Metal Servo horn Styrestag i aluminium med metall servo horn for TRX-4M bilene. Steering link, 6061-T6 aluminum (red-anodized)/ servo horn, metal/ spacers (2)/ 3x6mm CCS (with threadlock) (1)/ 2.5x7mm SS (with threadlock) (1) Eliminate flex and increase the steering precision of your TRX-4M™ with this aluminum steering link. The link is made from high-grade 6061-T6 aluminum for maximum strength and durability and then brightly anodized for a stylish look. Includes metal servo horn, spacers (2), 3x6 mm screw, and 2.5x7 mm screw.

9749 - Lenkearmsett Stål Komplett TRX-4M Suspension link set, steel (includes 4x53mm front lower links (2), 4x46mm front upper links (2), 4x68mm rear lower or upper links (4) Take your TRX-4M™ to the next level by replacing the standard suspension links with these heavy-duty steel links. In addition to being virtually indestructible, steel links add valuable weight to the lowest part of your TRX-4M for improved anti-rollover stability. Links come assembled and ready to mount with rod ends and steel hollow balls. Includes 4x53 mm front lower links (2), 4x46 mm front upper links (2), and 4x68 mm rear upper and lower links (4). Fits standard TRX-4M models.  TRX-4M High Trail models require two sets of 9859 long rod ends to extend the rear suspension links. Accessory part for these models: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9750 - Hjul Hexer 7mm (4) med Aksel Pins 1.5x5.8mm(8) TRX-4M Set of four composite 7 mm wheel hubs with axle pins (8) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9750A - Wheel Hubs 7mm Steel (4) Wheel hubs, 7mm hex (steel) (4)/ axle pins (8) Set of four 7 mm steel wheel hubs increase strength and add valuable weight to the lowest part of your TRX-4M™ for improved anti-rollover stability. Includes axle pins (8) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9750X - Wheel Hubs 7mm Messing (4) Wheel hubs, 7mm hex, brass (1 gram each) (4)/ axle pins (8) Set of four brass wheel hubs adds valuable weight to the lowest part of your TRX-4M™ for improved anti-rollover stability. Includes axle pins (8) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9751-OPT - Mellomakslinger HD Stål Ledd, 6061-T6 Hylser Driveshafts, center, male (steel) (4)/ driveshafts, center, female, 6061-T6 aluminum (blue-anodized) (front & rear)/ 1.6x7mm BCS (with threadlock) (4) Upgrade your TRX-4M’s™ center drivetrain with these heavy-duty telescoping driveshafts. Tough steel drive hubs key into brightly anodized 6061-T6 aluminum shafts for unbeatable strength and style. Includes front and rear steel drive hubs, aluminum center shafts, and 1.6x7 mm Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9753 - Hjulaksel Foran Yttre 1 par Pair of front stub axles with cross pins (2), and drive pins (4) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9753X - Hjulaksel Foran Yttre Herdet Stål (1) The heavy-duty front stub axle is made from high-grade hardened steel for maximum strength and durability. Sold individually. (Shaft is a direct replacement for the 9756 axle set, or an upgrade for standard axles) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9754 - Rep. Sett Mellomaksler TRX4-M  Rebuild kit, constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for front driveshafts or #9751 metal center driveshafts) The CV driveshaft rebuild kit includes all the hardware needed to rebuild two front or center driveshafts Accessory part for these models: TRX-4M™ 1/18 Land Rover® Defender® TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco®

9755 - Mellomakslinger Center Foran/Bak Front and rear center driveshafts come assembled and ready to install Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9756 - Akslingsett Universaler Foran Stikk Bak TRX-4M Axle shafts, front (2), rear (2)/ stub axles, front (2) (hardened steel)/ 1.5x7.8mm pins (2)/ 1.5x6mm pins (4)/ cross pins (2) Give your TRX-4M™ the ultimate drivetrain upgrade with the heavy-duty axle set. Made from high-grade hardened steel, the heavy-duty axle set is the ultimate in strength and durability. The set includes front and rear axle shafts, front stub axles, cross pins (2), 1.5x7.8 mm dowel pins (2), and 1.5x6mm dowel pins (4). Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9757 - Støtdemperfjærer TRX-4M (GTM-0.072 Rate)  (2) GTM shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (0.072 rate) (1 pair) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9758 - Støtdemperfjærer TRX-4M (GTM-0.095 Rate)  (2) GTM shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (0.095 rate) (1 pair) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9759 - Støtdemperfjærer TRX-4M (GTM-0.123 Rate)  (2) GTM shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (0.123 rate) (1 pair) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9760 - Støtdemperfjærer TRX-4M (GTM-0.155 Rate)  (2) GTM shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the spring rate number, the firmer the spring. (0.155 rate) (1 pair) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9761A - Fjærskåler i Messing for Støtdemper TRX4-M 1gram stk (4) Brass lower spring retainers add valuable weight to the lowest part of your TRX-4M™ for improved anti-rollover stability and superior rock-climbing capability. Sold as a set of four. Accessory part for these models: TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9762 - Rep Sett Støtdemper TRX-4M  Rebuild kit, GTM shock (o-rings, spacers, bladders, bottom caps) (renews 2 shocks) Refresh the oil-filled GTM shocks in your TRX-4M™ with this rebuild kit. Includes O-rings (4), spacers (2), bladders (2), and bottom caps (2). Refreshes two shocks. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9762A - Støtdemperdeler (Topp-Skål-BallEnds) TRX-4M  Shock cap (2)/ spring perch (2)/ rod end (2)/ spring preload spacer (4) Refresh the oil-filled GTM shocks in your TRX-4M™ with this rebuild kit. Includes preload spacers (4), caps (2), spring retainers (2), and rod ends (2). Refreshes two shocks. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9763-OPT - Støtdemper Body-Hylse 6061-T6 Aluminium (2) Give your TRX-4M™ a custom look with these colorful GTM shock bodies. Made from tough 6061-T6 aluminum and anodized with a brilliant finish, these shock bodies work with standard GTM shock caps and pistons. Just transfer your existing shock hardware over or create a new set of shocks using the 9762 and 9762A rebuild kits. Shock bodies are sold as a pair and include pre-load spacers (2). Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9764 - Støtdempere TRX-4M GTM Montert u. Fjærer (2) Shocks, GTM (assembled w/o springs) (2) incl 20WT shock oil Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9764-OPT - Støtdemper Sett U.Fjærer 6061-T6 Aluminium (4) Shocks, GTM, 6061-T6 aluminum (fully assembled w/o springs) (4) Take your TRX-4M™ to the next level with big-truck suspension technology. Heavy-duty GTM shocks are made from tough 6061-T6 aluminum and anodized with a brilliant finish. Give your TRX-4M long-lasting reliability and smoother suspension travel with these high-quality dampers. Shocks are sold assembled as a set of four with pre-load spacers (4). Springs sold separately. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9767 - BalanseLader iD TRX-4M USB Enkel balanselader for TRX-4M 2821 batteri, må ha strømforsyning med USB utgang på min 5.0V 3.0A Charger, iD® Balance, USB (2-cell 7.4 volt LiPo with iD® connector only) Use the 2-amp USB-A fast charger with your Power Cell 2s 2821 LiPo battery for fast and easy charging almost anywhere. Traxxas iD® technology delivers the perfect charge with no guesswork. Just plug the iD battery in and the charger does the rest. When the LED light turns green, the battery is charged. Replacement part for these models: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9768 - Felgsett 12 Eiker 1.0" (2) Designed for TRX-4M™ models, these 1.0" multi-spoke wheels give your truck a bold look and hold the tire securely for rugged crawling action. Sold as a pair.  (Fits 7 mm wheel hex)

9769 - Dekksett Canyon Trail 2.2x1.0" (2) Canyon Trail™ tires are scaled versions of standard TRX-4® rubber with aggressive lugs for dynamic traction. The soft-compound rubber grips onto rock surfaces to carry your TRX-4M™ up and over obstacles. Mount them on your stock 1.0" TRX-4M wheels or optional 9781 beadlock wheels. Sold as a pair.

9770 - Felgsett Spider 1.0" (2) Designed for TRX-4M™ models, these 1.0" multi-spoke wheels give your truck a bold look and hold the tire securely for rugged crawling action. Sold as a pair. (Fits 7 mm wheel hex)

9771 - Dekksett BFGoodrich Mud-Terrain T/A KM3 2.2x1.0" (2) Licensed BFGoodrich® Mud-Terrain™ T/A® KM3 tires are accurate down to the smallest detail with an authentic lug pattern and raised sidewall lettering. The soft-compound rubber grips onto rock surfaces to carry your TRX-4M™ up and over obstacles. Mount them on your stock 1.0" TRX-4M wheels or optional 9781 beadlock wheels. Sold as a pair. Replacement part for these models: 1/18 Ford® Bronco® Accessory part for these models: 1/18 Land Rover® Defender®

9773 - Dekk-Canyon Trail ,Felg 12 Eiker  2.2x1.0" (2) 1.0" Canyon Trail™ tires are scaled versions of standard TRX-4® rubber with aggressive lugs for dynamic traction. The soft-compound rubber grips onto rock surfaces to carry your TRX-4M™ up and over obstacles. Tires come mounted to 1.0" black multi-spoke wheels for quick and easy installation. Sold as a pair. (Fits 7 mm wheel hex) Replacement part for these models: 1/18 Land Rover® Defender® Accessory part for these models: 1/18 Ford® Bronco®

9774 - Dekk-BF Goodrich Mud-Terrain, Felg Spider 2.2x1.0" (2) Licensed BFGoodrich® Mud-Terrain™ T/A® KM3 tires are accurate down to the smallest detail with an authentic lug pattern and raised sidewall lettering. The soft-compound rubber grips onto rock surfaces to carry your TRX-4M™ up and over obstacles. Tires come mounted to 1.0" black multi-spoke wheels for quick and easy installation. Sold as a pair. (Fits 7 mm wheel hex) Replacement part for these models: 1/18 Ford® Bronco® Accessory part for these models: 1/18 Land Rover® Defender®

9775 - Motor Titan 87T 180 Size, 11T metall Pinion TRX-4M Motor, Titan® 87T (87-turn, 180 size)/ pinion gear, 11-tooth (metal) Designed for the TRX-4M™, the Titan® 180 motor features 87 turns of wire for dramatic torque in a micro motor. The motor comes with an 11-tooth metal pinion gear and motor plug for the ECM-2.5 control module. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®