Beier Lastebil tilbehør

Beier Data Kabel LogiLink K-USB-2 You can connect your sound modules SFR-1, USM-HL-2, USM-RC-2 and the speed controller UFR-1230/UFR-1230-D with this cable to your PC. You only need a USB port for this. The data cable K-USB-2 has two functions: Function 1: Live diagnosis Using the data cable you can monitor simultaneous in your Sound-Teacher the current settings and transmitted data while you are triggering functions. You can check the diagnosis data for example of the status (received values) of your proportional channels, your in- and outputs and your nautic values. This function is very helpful for troubleshooting. Your SFR-1, USM-HL-2 and USM-RC-2 can also save the diagnosis data on your SD card (without data cable). To use this function you need to activate it in your Sound-Teacher first. You can check the received values/recorded data with the diagnosis function of your Sound-Teacher. However, without data cable you can only check previous values and not the current "live" values.  Function 2: Transfer of configurations and sounds from Sound-Teacher/Drive-Teacher to USM-HL-2, USM-RC-2 and to speed controller UFR-1230/UFR-1230-D. Using the data cable you can transmit or change sounds and settings of your sound module without removing the SD card. Normally if you want to configure your sound module you need to remove the SD card from your model, insert it in your SD card reader of your PC and save the new setting with the Sound-Teacher. This can be quite impractical if you need to change configurations very often for example when you want to test different settings.  However, transferring sounds with the data cable K-USB-2 might take a few minutes! A sound with a length of 10 seconds takes about 60 seconds until it is transferred. Very long songs and large, new projects are only restrictively recommended to be transferred with the data cable.   You can also download the Prolific Technology Inc. with following link Prolific hardware driver. In a few cases you might get problems using the data cable K-USB-2 with Windows 7, Windows 8 and Windows 10 due to Windows (not working) hardware driver. You can read on the following link how to install and use our (working) hardware driver. You can find the driver software on the DVD-ROM of your USM-HL-2/USM-RC-2.   

Beier Høyttaler BF37 for SFR-1/USM-RC-2/USM-HL-2 Moduler (37x37x22mm) LS-8R-8W-37 Kraftig bredbånds høyttaler med 8 ohm impedans. Denne høyttaleren er preget av en veldig god basslyd og er veldig plasseringsvennlig p.ga stærrelsen. Passer til følgende moduler: SFR-serien lydhastighetskontrollere Mini lydmodul MSM-1 Lydmodul USM-RC-2 og USM-RC-3     Spesifikasjoner Type: Visaton BF 37, 8 OHM Impedans: 8 Ohm Musikkopptreden: 8 watt Frekvensområde (-10 dB): 100-20000 Hz Akustisk trykk: 74 dB Membran: Fuktimpregnert papirmembran Dimensjoner: 37 x 37 mm Dybde: 22 mm Vekt: 33 g

Beier Standby Switch/Bryter for SFR-1 Standbybryteren skal kobles til kontakten X9 modulen SFR-1. Når standbybryteren er slått av, slås BEC-spenningen på SFR-1 av og lydhastighetsregulatoren går til "standby". Strømforbruket til modulen synker deretter til ett strømtrekk på bare ca. 1 mA. Dette gjør at modellen kan holde seg i beredskap i flere timer uten å tømme batteriet merkbart. Imidlertid, hvis modellen ikke skal brukes på flere dager, skal batteriet kobles helt fra. Standbybryteren leveres med en loddet kabel. Kabellengden er ca. 25 cm.    

Beier Terminal clamp for switching outputs AKL-8-W, with plugable resistors   Description The AKL-8-W allows a comfortable wiring of the switching outputs for these modules: Sound speed controller SFR-1 Speed controller UFR-1230 Double speed controller UFR-1230-D As a special feature on the AKL-8-W terminal are 8 sockets for plugable resistors to facilitate the connection of LEDs. At the spring-loaded terminal the outputs 1-8 are available for an easy connection of consumers. The clamps 9 and 10 are for the easy distribution of the plus pole. The terminal can be connected directly to the modules with a pluggable ribbon cable. Included with the AKL-8-W are each 8 resistors with values of 0 ohms (only 1 black ring), 150 ohms (brown, green, brown, gold) 330 Ohm (orange, orange, brown, gold) and 680 Ohm (blue, gray, brown, gold).     More information can be found in the manual (PDF).   Technical Data Terminal clamp: Sound speed controller SFR-1: Terminal 1 to 8: Switching outputs 1 to 8 and 9 to 16(minus switching) Terminal 9 to 10: Positive pole of the supply voltage UFR speed controller: Terminal 1 to 8: Switching outputs from speed controller Terminal 9 to 10: Positive pole of the supply voltage Connecting cable: 10 pin ribbon cable, 20 cm long Size: 38 x 36 x 17 mm Weight: 18 g

Beier USB Stick Programvare for Sound Speed Controller SFR-1 SFR-1 programvare på USB stick, denne har samme innhold som DVD rom som medfølger SFR-1 med DVD og på DVD som selges løst.  

Beier Volume Control Potentiometer for SFR-1 Volume control poti 100k mini Eksternt volumkontrollpotensiometer for alle Beier lydmoduler. Du kan justere volumet på lydmodulen med denne bryteren . den er koblet direkte til lydmodulen med en 2-polet stikkontakt. Width/Length: 10 x 10 mm Diameter knob: 3 mm Cable length: 20 cm Volumkontroll potensiomenter 100kfor lydmoduler SFR-1, USM-A, USM-B, USM-HL-2, USM-RC og USM-RC-2

DVD-ROM for Beier Sound Speed Controller SFR-1 (Erstatnings DVD) Caution: To edit sound projects and to change settings on your sound speed controller, you need the DVD with the "SFR-1 Sound-Teacher"! Only order your sound module without DVD when you already have the SFR-1 DVD with the matching Sound-Teacher. The Sound-Teacher of other modules (e.g. USM-RC-2, USM-HL-2) is not working with the SFR-1. Innhold på DVD: The software "SFR-1 Sound-Teacher" is necessary to compile, edit and change sound projects (available in German, English and French) The program "Audacity" to edit and convert own sounds Over 250 sounds Complete sound projects for following models: • Auto - Ford F-350 (V8) • Auto - Landrover Discovery TD • Auto - Mercedes 320 CDI_1 • Auto - Mercedes 320 CDI_2 • Auto - Mercedes C63 AMG • Auto - Mercedes G (Diesel) • Auto - Mercedes Sprinter • Auto - Munga • Auto - Trabant • Auto - V8 • Auto - VW Bus • Auto - VW Golf GTI • Auto - VW Käfer • Bagger - Liebherr • Bagger - T174 • Bagger - Volvo • Bus - Mercedes Citaro • Flugzeug - Focke Wulf 190 • Flugzeug - Me 109 G10 • Flugzeug - Wright Sternmotor • Hubschrauber - Huey • Hubschrauber - Hughes • Hubschrauber - Rettungshubschrauber • Kipplaster - Volvo A25C • Laderaupe - Caterpillar • Lok - Climax • Lok - Dampflok • Lok - Dampflok_1 • Lok - Diesel • Lok - E-Lok • Lok - GP38 • Motorrad - Harley Davidson • Panzer - Elefant • Panzer - Gepard • Panzer - Gepard_1 • Panzer - Jagdpanther • Panzer - Jagdpanther_1 • Panzer - KV-1 • Panzer - Kanonenjagdpanzer • Panzer - Königstiger • Panzer - Königstiger_1 • Panzer - Leopard 1 • Panzer - Leopard 1_1 • Panzer - Leopard 2 • Panzer - Leopard 2A6 • Panzer - M1 • Panzer - M26 • Panzer - M41 Walker Bulldog • Panzer - MARS • Panzer - Marder • Panzer - Panther • Panzer - Panther G • Panzer - Panther G_1 • Panzer - Panther_1 • Panzer - Panzer III • Panzer - Panzer III_1 • Panzer - Panzer IV • Panzer - Piranha IIIH • Panzer - Sd.Kfz. 7 • Panzer - Sherman • Panzer - T-34 • Panzer - T-55 • Panzer - Tiger • Panzer - Tiger_1 • Panzer - Tiger_2 • Panzer - Tiger_3 • Pistenraupe - PB300 • Pistenraupe - PB600 • Pistenraupe - PB600_2 • Pistenraupe - Prinoth Beast • Radlader - Liebherr • Radlader - Liebherr L586 • Raupe - DET250 • Raupe - Komatsu D61 • Raupe - Liebherr PR734 • Raupe - Liebherr PR736 • Raupe - T100 • Schiff - Binnenschiff • Schiff - Dampfschiff • Schiff - Dampfschiff S.S. Furie • Schiff - Eisbrecher Kontio • Schiff - Feuerlöschboot • Schiff - Frachter • Schiff - Kutter • Schiff - Kutter_1 • Schiff - Mississippidampfer • Schiff - Mississippidampfer_1 • Schiff - Patrouillenboot Hohwacht II • Schiff - Polizeiboot • Schiff - Powerboat Mercruiser • Schiff - Riva Aquarama • Schiff - Riva Ariston • Schiff - Schiffsdiesel • Schiff - Schiffsdiesel_1 • Schiff - Schlachtschiff Bismarck • Schiff - Schlepper • Schiff - Schlepper_1 • Schiff - Schlepper_2 • Schiff - Schlepper_3 • Schiff - Schlepper_4 • Schiff - Schlepper_5 • Schiff - Schlepper_6 • Schiff - Seenotrettungskreuzer • Schiff - Torpedoboot T56 • Schiff - Yacht V12 • Traktor - Caterpillar 830m • Traktor - Claas Xerion • Traktor - Eicher Mammut • Traktor - Fendt 1050 Vario • Traktor - Fendt 936 Vario • Traktor - Fendt Dieselross • Traktor - Fendt F18 • Traktor - JCB Fastrac • Traktor - John Deere 8245R • Traktor - John Deere 8530 • Traktor - Kirovets K-700 • Traktor - Kirovets K-700A • Traktor - Lanz • Traktor - Lanz Bulldog • Traktor - MB-Trac • Traktor - MB-Trac 1100 • Traktor - MB-Trac 1800 • Traktor - Schlüter 1250VL • Traktor - Schlüter Compact 950 • Traktor - Schlüter Super 1500 TVL • Traktor - Unbekannt 01 • Truck - DAF XF 105 • Truck - Detroit Diesel • Truck - GAZ-66 • Truck - IVECO 140 E 30 • Truck - KRAZ 255 • Truck - Kenworth W900 • Truck - M35A2 • Truck - MAN • Truck - MB Actros V6 320 kW • Truck - MB Actros V8 352 kW • Truck - MB-NG • Truck - MB-SK 88 • Truck - Mack • Truck - Opel Blitz • Truck - Renault Magnum • Truck - S4000 • Truck - Scania 140 V8 • Truck - Scania V8 • Truck - Scania V8 mit Turbopfeifen • Truck - Scania V8_1 • Truck - Scania Vabis 56 • Truck - Unimog 1600 • Truck - Unimog 400 • Truck - Unimog 406 • Truck - Unimog 406_1 • Truck - Ural • Truck - Volvo FH16 • Turbine - 1  

King Pin KB-IR-T til Tamiya Tralle for Infrarød Overføring (1) KB-IR-T: Tamiya kingbolt med IR-mottakerfeste Avbildet IR-mottaker er ikke inkludert med kongebolten Kan også brukes sammen med IR systemet til Servonaut Når det gjelder semitrailere, er IR-sendedioden festet under femte hjulkobling og IR-mottakeren er montert på kongepinnene. For å sikre at IR-mottakeren kan festes enkelt og stabilt, tilbyr vi en spesiell brakett som mottakeren kan klemmes fast i. For å overføre det infrarøde signalet har kongebolten et kontinuerlig hull.

King Pin til Tamiya Tralle for Bluetooth Overføring (KB-BT-T) King pin with holding block for the magnetic sensor for Tamiya trucks For an easy fixing of the sensor we offer a mouting for the magnetic sensor with a special 3D-print block. The sensor can be plugged into the block, which is srewed on top of the king pin. Attention: The king pin must be made of a material that conducts the magnetic field lines well! King pins made of stainless steel or aluminum are not suitable here.