Traxxas Racing Deler

4193 - Top Drive Gear FEATURES: Silver steel construction. INCLUDES: One Top Drive Gear. SPECS:    Overall length: 55.8mm (2.20")           Diameter of shaft: 5.10mm (.200")           Diameter of gear: 11.26mm (.444")           Number of teeth: 13

4394 - Spur Gear Adapter 4-Tec

 4885 - Spur Gear 41T Standard FEATURES: Replaces damaged or worn spur gears           Black plastic construction INCLUDES: One 41 Tooth 1st Speed Spur Gear REQUIRES: Installing in gearbox between the drive hub assembly and the             primary gears

 4886 - Spur Gear 37T Standard This is the 2nd Gear for the 2-speed for the Nitro 4-Tec. FEATURES: Black nylon color INCLUDES: One gear 37 Teeth

4887 - Spur Gear 45T Optional This is the Optional 45T Spur Gear for the Nitro 4-TEC.                This replaces the stock 41T gear FEATURES: Black nylon construction INCLUDES: One 45T spur gear

4888 - Spur Gear 41T Optional FEATURES: Features black plastic construction.           This is the 2nd gear for the the two speed transmission.           Made of a rigid plastic for longer life over stock. INCLUDES: One spur gear

These are the Stub Axles for the Traxxas 2.5 T-Maxx monster truck. FEATURES: Features heavy duty nylon yokes for long lasting durability.           The steel axle extends from the nylon yoke.           Black in color. INCLUDES: Two heavy duty stub axles

4966- Brake Adapter Aluminum 1 STK 1 stk adapter for Valiant/T-Maxx/Magic Wheel, må brukes på Valiant/Magic Wheel for å få brukt 4927x transmission output yokes og forsterkede mellomakslinger. This adapter fits in the center of the brake disc and fastens                     to the output yoke in the transmission. FEATURES: Replaces worn or missing brake adapters           Constructed of lightweight blue aluminum INCLUDES: One Brake Adapter REQUIRES: Installing over output yoke (4927) and securing with a 4x7.5 pin.

4986 - Gear Hub Assembly T-Maxx This is the Replacement Gear Hub Assembly for the Traxxas T-Maxx                         4WD Radio Control Monster Truck. This gear hub assembly is installed between the 1st and 2nd speed spur gears. FEATURES: Replaces damaged or worn gear hub assemblies           Hub assembly is constructed of aluminum           One-way bearing and snap ring are made of steel INCLUDES: One Gear Hub Assembly with one-way bearing and snap ring for the             Traxxas T-Maxx REQUIRES: Installing in gearbox between the 1st speed spur gear (4984) and the             2nd speed spur gear (4985)

5184 - Output Shaft Transmission 1p Nedre girkasseaksling T-Maxx 3,3 Classic

5215- Clutch Bell 15T/Fiber Washer/E-Clip Revo (2) This is the stock replacement Clutch Bell for the Traxxas Revo Truck.          This is the gear that is installed on the engine crankshaft. FEATURES: Vented clutch bell           One piece bell design INCLUDES: One 15 tooth black vented clutch bell           Two 5x8x0.5mm fiber washers           One 5mm e-clip REQUIRES: Using the original 5x11x4mm clutch bell ball bearings

5229 - Shim sett Kjøletopp TRX 2.5 3 stk Shim i tykkelse 1x 0.15mm, 1x 0.25mm, 1x 0.35mm Ytterdiameter  : 21.18mm Innerdiameter : 14.98mm

5383 - Drev sett 2-Speed Close Ratio Revo INCLUDES: One 40T 2nd speed gear           One 13T/16T input gear           One screw pin 3x14x2x9mm

5388 - Brake Cam/Sleeve Revo FEATURES:  Aluminum brake cam construction            Plastic brake sleeve construction INCLUDES:  One brake cam        Part #5388            One plastic sleeve   Part #5388 SPECS:    Brake cam length:      1-11/16"        (36mm)           Brake cam diamter:        3/16"         (4mm

5515X - Battery Box Bumper (rear) Jato

Front & Rear Suspension Pin Set INCLUDES: Four 1.1"  (3x27mm) pins Four 2.04" (3x52mm) pins Two  1.4"  (3x35mm) pins

5532 - Left/Right Caster & Steering Blocks 30 Deg FEATURES: Nylon construction Black in color INCLUDES: One Left and Right 30° Caster Blocks One Left and Right 30° Steering Blocks

5533 - Rear Left & Right Suspension Arms (2) FEATURES:  Nylon Construction  Black in Color INCLUDES: One Left Rear Suspension Arm One Right Rear Suspension Arm  

5537 -  Front Left & Right Wheel Spindles (2) FEATURES: Metal construction Black in color INCLUDES: One Left Front Wheel Spindle One Right Front Wheel Spindle  

5549 - Fuel Tank Rebuild Kit INCLUDES: One Fuel Tank Cap Spring One Rubber Tank Gasket One Metal Cap Pin Two Rubber Grommets

5555 - Rear Left & Right Stub Axle Carrier Jato FEATURES: Nylon construction           Black in color INCLUDES: One Left Rear Stub Axle Carrier           One Right Rear Stub Axle Carrier

5558 - Front & Rear Suspension Tie Bars for bl.annet Jato

5565x - Brake Disc Hub Revo (3) These are the Brake Pads and Hardware for the Traxxas Revo. FEATURES: Installs on either side of brake disc INCLUDES: Three Metal Calipers, one Nylon Brake Hub  

5586 - Gear 1st Speed 32T/Input 14T INCLUDES: One 1st Speed Gear 32T           One Input Gear 14T           One Threaded Pin Shaft

5932 - Fr Left Upper & Lower Suspension Arms Slayer This is the Upper & Lower Left Front Suspension Arm Set for the Traxxas Slayer Pro 4WD Short Course Nitro RTR FEATURES Durable black nylon construction INCLUDES One Upper Left Front Suspension Arm One Lower Left Front Suspension Arm    

5933 - Re Rt Upper & Lower Suspension Arms Slayer  This is the Upper & Lower Right Rear Suspension Arm Set        for the Traxxas Slayer Pro 4WD Short Course Nitro RTR FEATURES: Durable black nylon construction INCLUDES: One Upper Right Rear Suspension Arm           One Lower Right Rear Suspension Arm  

RPM-81142 Traxxas Slash2WD Rear Body Mounts (UTGÅR)   NB: These body mounts and posts are fully height adjustable on the Traxxas Slash. For vehicles listed above other than the Slash 2wd, each part number may be used although adjustability may be limited based on the vehicle used. RPM-81142 Traxxas Slash Rear Body Mounts. Adjustable Body Mounts & PostsFront - fits the Slash 2wd, Rustler & Nitro RustlerRear - fits the Slash 2wd, Stampede & Nitro Stampede Info fra leverandør: Immediately after releasing our Adjustable Body Mounts for the Traxxas Slash 4x4 (#73932), RPM customers with the 2wd version of the Slash wanted adjustable, more durable body posts too. RPM Adjustable Body posts for the Traxxas Slash 2wd are here and are designed for durability and strength while still allowing you to change the body height on the truck. Our unique body post mounting system allows the option of using the stock body height on the chassis. The body can also be lowered as much as 3/16? or raised as much as 3/8? simply by moving the posts up or down on the mounts. This simple, yet clever design is strong enough to handle the toughest of conditions while still allowing enough flex to absorb impacts that could otherwise damage other more fragile internal components of the chassis. Everything about our body mounts and posts are beefier than stock ? from the thicker than stock screw mounts to the twin screws holding the body posts on to the mounts. We also use an I-beam shape throughout each mount, which provides the strength these parts need for those less than perfect landings.