Lys sett, Led lights

1/8-1/5 Scale High Power Head Light System GTP69 Meget kraftige super bright LEDs med reflektorer! Bruker 5.0V- 0.6A. Lar seg fjernstyres om man har ledig kanal på mottakeren og en elektronisk switch. Stort bruksområde. Kan for eksempel benyttes i fly, bil og båt. Spesifikasjoner: Ø 26.8mm Hovedlamper (Kan deles opp i 4 stk) Baklamper L 97.5mm  ( Kan deles i 2)   This lighting system use intelligent MUC control and have two sets of super bright lights groups. It’s easy to set up and operate. Feature: For: 1/5 and 1/8 Off-Road and other types model RC Cars Powered by receiver, don’t need other power supply. Two groups are for output, one group is always lit and the other is controlled by the throttle channel of transmitter. Include: Control board (1pc) Big headlight and dome light – 1 contain 4 light set (1 pc) Taillight – 1 contain 2 light set (1 pc) Manual (1 pc)

2320005 LED Set incl. buckets for 1:10 scale bodies Lyssett med reflektorer som kan brukes på de fleste 1/10 karosserier 5 led med nødvendige tilkoblingskabler.

3478 -  Wire harness (for use with #3475 cooling fan) Skjøtekabel 30cm med kontakt, Futaba Hunn(Batteriside) og JST Hann (Regulatorside), leveres med festestrips. Wire harness (for use with #3475 cooling fan) Replacement wire harness for the 3476 cooling fan kit.

3690 -  LED Light Bar, Front for 5835X-3635-3630-6835X-6735(assembled) LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®) Replacement front LED light bar for Slash and Stampede LED light kits. Includes 3x8 screws (2), and 2.5x8 screws (2). Requires front bumper 5835X for 2WD Slash, 3635 for 2WD Stampede®, 3630 for 2WD Bigfoot® No. 1, 6835X for 4WD Slash, or 6735 for 4WD Stampede®.

3mm Blå Led 3V Løspakke  (50) 50 stk løs 2.8-3.2V  3mm Ledpære Disse må kobles med motstand

3mm Grønn Led 3V Løspakke  (50) 50 stk løs 2.8-3.2V  3mm Ledpære Disse må kobles med motstand

3mm GUL Led 3V Løspakke  (50) 50 stk løs 2.8-3.2V  3mm Ledpære Disse må kobles med motstand

3mm Gul Led Ultra Bright 1.5V (1) 1 stk løs 1.5V Ultra Bright ledpære Disse må kobles med motstand

3mm Kald Hvit Led 3V Løspakke  (20) 20 stk løs 2.8-3.2V  3mm Ledpære Disse må kobles med motstand

3mm Led Light Set Green (2) 2 stk grønne 3mm ledpærer med kontakt, (Tamiya/3 Racing kompatibel)   Briefs:   Compatible with 3 Racing & Tamiya Light Kit LED diameter: 3mm Colour: Green Length: 500mm Qty: 1Pc

3mm Led Light Set Orange (2) 2 stk orange 3mm ledpærer med kontakt, (Tamiya/3 Racing kompatibel)   Briefs:   Compatible with 3 Racing & Tamiya Light Kit LED diameter: 3mm Colour: Orange Length: 500mm Qty: 1Pc

3mm Led Light Set Yellow (2) 2 stk gule 3mm ledpærer med kontakt, (Tamiya/3 Racing kompatibel)   Briefs:   Compatible with 3 Racing & Tamiya Light Kit LED diameter: 3mm Colour: Yellow Length: 500mm Qty: 1Pc

3mm Rød Led 3V Løspakke  (50) 50 stk løs 2.8-3.2V  3mm Ledpære Disse må kobles med motstand

3mm Rød Led Ultra Bright 1.5V (1) 1 stk løs 1.5V Ultra Bright ledpære Disse må kobles med motstand

500907676 - Carson 1:14 Markeringslys 21 led 7.2-12V Scania 770 Lyssett til Tamiya Scania 770S. Ikke kompatibelt med MFC-01/03 Uten kontakter så loddes inn ønsket kontakt • Positionlight-Set Scania 770S • Light functions: • Positionlamps with High beam (Roof), 5x Lightbar light pods, Bumper Lightbar, Auxillary light radiator grill, Positionslight (side skirt) • not compatible with TAMIYA MFC-01/03

5mm Hvit Led Ultra Bright 3V (1) 1 stk løs 3V Ultra Bright ledpære Disse må kobles med motstand

65-10030 Ground Led Light Set White Under body belysning for rc-bil ++ 2 stk 20cm led striper i hvitt lys med dobbeltsidig festetape og kabling for tilkobling 9V batteri, kan også tilkobles andre strømkilder opp til 11.1V ved å bytte ut kontakten.  Stripene består av 12stk led på hver.        

65-10041 Ground Led Light Set Red Under body belysning for rc-bil ++ 2 stk 20cm led striper med rødt lys med dobbeltsidig festetape og kabling for tilkobling 9V batteri, kan også tilkobles andre strømkilder opp til 11.1V ved å bytte ut kontakten.  Stripene består av 12stk led på hver.        

6592 - Power module, Pro Scale® Advanced Lighting Control System (includes mount, communication cables, hardware) Replacement power module for the Pro Scale® Advanced Lighting Control System Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

6593 - Distribution Block, Pro Scale® Advanced Lighting Control System Replacement distribution block for the  Pro Scale® Advanced Lighting Control System Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

6594 - Kommunikasjonskabel PRO Scale Lys system Replacement communication cable for the Pro Scale® Advanced Lighting Control System Traxxas 6594 Receiver communication cable, Pro Scale® Advanced Lighting Control System   ccessory part for these models: TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Land Rover® Defender® TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-4® Land Rover® Defender® TRX-4® Unassembled Kit

8026X - LED Rock Light Hjulbuelys (8) Må ha TRX strømforsyning 8028   Light up the trail with LED Rock Lights Traxxas LED Rock Lights install directly into the inner fenders of the TRX-4 and are positioned to help illuminate obstacles for trouble-free nighttime crawling. The kit includes two LED modules per wheel, ensuring a flood of light throughout the underside of the truck. Down lighting in the wheel wells combined with the headlight/taillight kit make it easy to see the orientation of the vehicle in the dark.

8028 - LED Light Power Supply 3V 0.5A Strømforsyning for TRX-4 lyssett

8029 - LED lightbar (Rigid®), TRX-4 inkl power box 8028 LED lightbar kit (Rigid®)/power supply, TRX-4

8031 - 3-in-1 Wire Harness, LED Light Kit 3 i 1 paralellkabel for lyssett til TRX-4 Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Land Rover® Defender® TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

8035A - LED Lys Sett Komplett TRX4 1979 Bronco/Blazer - Chevrolet K10- Ford F150 Hightrail,  LED-lyssett, komplett med strømforsyning (inneholder frontlykter, baklys, sidemarkeringslys og fordelingsblokk) (passer til karosseri i #8010- eller 9230-serien) Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Ford® F-150® High Trail Edition™  

8038 - LED Lys Sett Komplett Blazer K5 TRX-4 Blazer Light Kit Ultimate Scale Looks and Rock-Solid Durability   The Traxxas TRX-4 Chevrolet K5 Blazer delivers scale appearance and detail like never before. The new LED Light Kit (#8038) takes scale realism to the next level with working headlights, tail lights, and side markers. Fully waterproof and built Traxxas-Tough, the LED light kit is ready for your wildest adventures. No matter where the trail leads, day or night, the TRX-4 Chevrolet K5 Blazer will light the way.   QUICK FEATURES ON TRX-4 BLAZER LED LIGHT KIT (#8038)   Sealed waterproof design High / low headlight setting Precision-engineered for direct fit on the Blazer body Plug and play design with modular connectors Traxxas LED lighting module Regulated to provide consistent and reliable power output with batteries from NiMH to 3S LiPo Eliminates overheating, glitching, and other electronics issues common with unmatched aftermarket systems Clear headlight lenses with reflectors, red tail lights, and amber side markers    

8039 - LED Lys Sett uten Strømforsyning Blazer K5-K10 The TRX-4 Blazer LED Light Kit uses the same #8028Power Module as other TRX-4 light kits. The #8039LED Light Kit provides a cost-effective solution to add lights to the TRX-4 Blazer by reusing the power module from previous installations. Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® (Option) TRX-4® Scale and Trail™ Crawler (Option) TRX-4® Sport (Option) TRX-4® Unassembled Kit (Option) TRX-4® Ford® Bronco (Option)

8086 - LED Expedition Rack Scene Light Kit (fits #8111 body, requires #8028 power supply) Taklys for expedition rack for Sport body 8111/8111r og rack 8120/8120X Må ha TRX strømforsyning 8028

8087 - LED Light Bar Kit (fits #8111 body, requires #8028 power supply) Lysbjelke for expedition rack for Sport body 8111/8111r og rack 8120/8120X Må ha TRX strømforsyning 8028 Designed to rigorous standards the LED roof light bar utilizes surface-mount LED technology and a custom clear lens for unsurpassed realism. The light bar bolts directly to the Expedition Rack. Fits 8111-series bodies and 8213-series clipless bodies. Requires 8028 power supply.

8089 -  4-i-2 Led Lys Kontakt for TRX-4 Koblingskontakt som gir deg 4 utganger  4-in-2 wire harness, LED light kit Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® 2021 Ford® Bronco TRX-4® Equipped with Traxx® TRX-4® Mercedes-Benz® G 500® 4X4² TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

8095 - LED Light Set Complete Pro Scale TRX-4 Defender TRX-4® Defender LED Light Kit tar skalarealisme til neste nivå med fungerende frontlys, baklys, lysbar og rocklights. Fullt vanntett og bygget Traxxas-Tough, LED-lyssettet er klart for dine villeste RC-crawling-eventyr. LED light set, complete with power supply (contains headlights, tail lights, roof light bar, rock lights & distribution block) (fits #8011 body) The TRX-4® Defender LED Light Kit takes scale realism to the next level with working headlights, tail lights, light bar and rock lights. Fully waterproof and built Traxxas-Tough, the LED light kit is ready for your wildest RC crawling adventures. Accessory part for these models: TRX-4® Scale and Trail™ Crawler Defender

8897 - LED Rock Light Hjulbuelys for Bakaksling TRX-6 (2) Utbyggingssett for TRX-6   LED light harness, rock lights, TRX-6™ (requires #8026X for complete rock light set) Accessory part for these models: TRX-6™ Mercedes-Benz® G 63® AMG 6X6

8990 - LED Lyssett KOMPLETT for MAXX   High-Intensity LED Light Kit for Maxx Monster Trucks Built Maxx® Tough! The Traxxas Maxx redefines speed, durability and toughness with its innovative design and massively overbuilt chassis. Only Traxxas could design an LED light kit worthy of the Maxx’s extreme performance. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit. Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power both high-power light bars in the kit while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. The smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing. ­ MAXX LED LIGHT KIT (#8990) INCLUDES: ­ High-output front LED light bar Multi-function rear LED light bar Replacement bumpers with LED cutouts High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes) Mounting hardware ­ ­ Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-4s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (#6511*) to control individual lights remotely and create custom lighting configurations. Of course, since it’s from Traxxas, this powerful, feature-rich system is rugged and fully waterproof for all of your exciting RC adventures. High-Voltage Power Rather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-4s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance.     Technology Customize your setup with three different lighting modes on the amplifier. Use the Traxxas Link App* to further customize the lighting modes to your specifications or turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze.   ­ QUICK FEATURES ON MAXX LED LIGHT KIT (#8990) ­ Compatible with Velineon VXL-4s ESC Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Includes front and rear bumpers with LED cutouts Firmware updatable through the app App-controlled lighting functions* Turn lights on/off remotely Build a custom dashboard Customize lighting configurations and actions Add additional lighting components ­ ­     LED Configuration with Traxxas Link App   MODEL 8990: MAXX LED Light Kit *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

9262X - Veltebøyle Komplett med Lys for K10 Roll bar (assembled with LED light bar)/ roll bar mounts, left & right/ 2.6x12mm BCS (self-tapping) (4) (fits #9212 body) Add more scale detail to your TRX-4® K10 High Trail Edition with this chrome roll bar with working LED lights. Includes left and right mounts and 2.6 mm screws (4). (Requires 9212 K10 body with LED light kit) Accessory part for these models: TRX-4® Chevrolet® K10 High Trail Edition™

9290 - 2021 TRX-4 Bronco Pro Scale® LED Light Set Lyssett for 2021 Traxxas Bronco kan brukes med 2-3S Max 12.6V All the lighting control of a full-scale Bronco is at your fingertips with the Pro Scale LED Light Set for your 2021 TRX-4 Ford Bronco. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard lights. The brake lights glow when you slow or stop. Hit reverse, and backup lights glow automatically. For maximum power and convenience, add Traxxas Link and the optional Wireless Module (Part # 6511, sold separately) to configure your lights right from your iOS or Android device. The Pro Scale system makes it easy. Pro Scale® Light Set Features ­ Headlights with high/low beam settings Halo daytime running lights Brake lights Reverse lights Turn signals with auto-cancellation Hazard lights Kit Includes: Complete LED light kit Pro Scale Lighting Power Module and mount Pro Scale Lighting Distribution Block and mount Motor sensors wire harness Front and rear light harness MAXX Link cable Installation hardware

9783 - Pro Scale LED Light Set Bronco TRX-4M TRX-4M® Bronco Pro Scale™ Light Set Add scale lighting to your 1/18 scale TRX-4M Bronco for an extra layer of fun and good looks. The Pro Scale Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction.   ­ Pro Scale® Light Set Features ­ Fully waterproof Single wiring harness connection to ECM-2.5™ for simple installation 5 Lighting Modes; selectable using the EZ-Set® Button Headlights Marker/Daytime Running Lights Lights Off (Brake and Reverse Lights only) Hazard Lights Demo Mode* (plays a cycle of lighting functions) Headlights Daytime running lights Functional brake lights Functional reverse lights Hazard lights Kit Includes: LED lighting kit harness *For display only; TRX-4M will not drive in this mode ­   Easy to Install! Pro Scale lighting functionality is already built into the ECM-2.5 so there's no need to install extra modules. Just plug the wiring harness into one the light channels on the ECM and you're ready for fun. You can even use the standard bumper lights in addition to Pro Scale lighting for an extra boost of power. A new point-to-point LED wiring bus makes installation as simple and clean as possible with a single length of wire running the entire system. Ford Motor Company Trademarks and Trade Dress used under license to Traxxas.

9784 - Pro Scale LED Light Set Defender TRX-4M TRX-4M® Defender Pro Scale™ Light Set Add scale lighting to your 1/18 scale TRX-4M Defender for an extra layer of fun and good looks. The Pro Scale Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction.   ­ Pro Scale® Light Set Features ­ Fully waterproof Single wiring harness connection to ECM-2.5™ for simple installation 5 Lighting Modes; selectable using the EZ-Set® Button Headlights Marker/Daytime Running Lights Lights Off (Brake and Reverse Lights only) Hazard Lights Demo Mode* (plays a cycle of lighting functions) Headlights Daytime running lights Functional brake lights Functional reverse lights Hazard lights Kit Includes: LED lighting kit harness *For display only; TRX-4M will not drive in this mode ­ ­   Easy to Install! Pro Scale lighting functionality is already built into the ECM-2.5 so there's no need to install extra modules. Just plug the wiring harness into one the light channels on the ECM and you're ready for fun. You can even use the standard bumper lights in addition to Pro Scale lighting for an extra boost of power. A new point-to-point LED wiring bus makes installation as simple and clean as possible with a single length of wire running the entire system. Land Rover and the Land Rover Logo are trademarks owned and licensed by Jaguar Land Rover Limited.  

9786 - Kabel med Led Lys Front TRX-4M Wire harness, LED lights (front)/ zip ties (2) Replacement front LED light harness includes zip ties (2)  

9789 - Lysbar sett for TRX-4M Bronco-Defender Lys opp veien til ditt neste eventyr med TRX-4M™ LED Light Bar-settet. Settet legger til ultrahvitt foroverbelysning med ekstra lysbjelker på takstativet og frontstøtfangeren. Lysbarene er fullt kompatible med standard TRX-4M støtfangerlys og Pro Scale® Light Set. Settet er enkelt å installere med inkluderte fester for både Bronco- og Defender®-karosserier med allt monteringsutstyr. Alt er helt vanntett for bekymringsfri kjøring i alle miljøer. Ta din TRX-4M til neste nivå med dette ultimate belysningstilbehøret. TRX-4M Accessory Light Bars Features   Ultra-bright LED roof and bumper bars for maximum forward lighting Fully waterproof Fits TRX-4M Bronco and Defender bodies Simple installation with all mounting hardware included

9790 - Lyssett Tilhenger Komplett med Lamper-Kabling TRX-4M tilhengerlyssett komplett med allt som trengs for å få lys på TRX4-M hengeren. Tilhengerlyssettet legger til fungerende bremse- og reverslys til TRX-4M™ tilhengeren. Gi tilhengeren din en ekstra dose skalarealisme med dette altomfattende settet. Lyssettet er fullt kompatibelt med TRX-4Ms standard støtfangerlys og Pro Scale® Light Set. Tilhengerlys er enkle å installere med den medfølgende monteringsutstyret og replikaverktøykassen. Alt er helt vanntett for bekymringsfri kjøring i alle miljøer. TRX-4M Trailer Light Kit Features   Working brake and reverse lights Fully waterproof Compatible with existing TRX-4M light kits Simple installation with all mounting hardware included

9893 - Kabling til Tilhenger Lys-sett Wire harness and mount for 9790 trailer LED light kit. Accessory part for these models: TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9863 - Lyssett For Veltebøyle 9862 (High Trail) Ledlyssett med ledningsnett for TRX4-M Veltebøyle High Trail. Add more scale detail to your TRX-4M by replacing the replica lights in the 9862 roll bar with these bright LED lights. Includes wiring harness.®    

9883 - Lys Sett Pro Scale TRX-4M Chevrolet K10 Legg til skalabelysning til din TRX-4M Chevrolet K10 skala 1/18 som gjør det ekstra moro og gir ett godt utseende. Pro Scale ® Lighting Kit gir fungerende frontlykter, baklys, bremselys og varselblink som reagerer nøyaktig på inputene dine. Installasjonen er rask og enkel fordi programmeringen allerede er innebygd i ECM-2.5. Bare installer lysene i karosseri og koble til en enkelt ledning – det er alt som skal til! Pro Scale-lys er bygget for å håndtere alle værforhold med fullstendig vanntett konstruksjon. Inkluderer monteringsutstyr.   Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9811 body) Add scale lighting to your 1/18 scale TRX-4M™ Chevrolet® K10 for an extra layer of fun and good looks. The Pro Scale® Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction. Includes mounting hardware. Accessory part for these models: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™

9884 -Lys Sett Pro Scale TRX-4M Ford F-150 Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9811 body) Legg til skalabelysning på din 1/18-skala TRX-4M Ford F-150 High Trail Edition™ for et ekstra lag med moro og godt utseende. Pro Scale Lighting Kit legger til fungerende frontlykter, baklys, bremselys og nødblink som reagerer nøyaktig på dine inntrykk. Installasjonen er rask og enkel fordi programmeringen allerede er innebygd i ECM-2.5™. Bare installer lysene i huset og plugg inn en enkelt ledning – det er alt! Pro Scale-lys er laget for å tåle alle værforhold med en helt vanntett konstruksjon.®®® Accessory part for these models: TRX-4M™ 1/18 1979 Ford F-150

AX24254 - Axial Double LED Light String (Orange LED) Must have Axial NVS - Night Visions System - AX24251 and/or Simple LED Controller- AX24257 installed for vehicles that do not include these light strings. COMPATIBILITY

AX24256 - Axial 5 LED Light String (5 mm White LED)  • 5 LED light string for auxiliary lights (White LED) • Must have Axial NVS - Night Visions System - AX24251 and/or Simple LED Controller- AX24257 installed for vehicles that do not include these light strings COMPATIBILITY

AX24258 - 4 LED Light String (5mm White LED) Must have Axial NVS - Night Visions System - AX24251 and/or Simple LED Controller- AX24257 installed for vehicles that do not include these light strings.   COMPATIBILITY  

AX31098 8 LED Light String (5mm White LED) Knallsterkt ultrahvitt xenonlignende lys. • Requires AX31097 – 3 port high output LED controller Light up the night, and add a touch of realism to your scale R/C with this 8 LED light string. LED string is a direct bolt in application for the CRC / Rigid SCX10 light bars.  • Compatible with CRC / Rigid Edition SCX10 light bars • 8 LED’s total     COMPATIBILITY

High Power Head Light System Meget kraftige super bright LEDs med reflektorer! Bruker 0.5A. Lar seg fjernstyres om man har ledig kanal på mottakeren. Stort bruksområde. Kan for eksempel benyttes i fly, bil og båt.   Features: Power is supplied via the JST-XH balance connector from a 2s lipo battery The JST-XH balance connector input voltage range is 6.5-8.4v DC Control voltage input from the receiver: 5.0V DC Max Specifications: LED Housing Diameter: 22mm LED Housing Depth: 21mm JST-XH (2s) wire length: 180mm Control to LED wire length: 200mm

L4 LED Super Bright Lyssett 3.6-8.4V (1S-2S Lipo) Lyssett med 4stk kraftige super bright LED. Specifications: Brand name: G.T.POWER Input voltage: 3.6V-8.4V Max current rate: Max 130mA LED Housing diameter: 10mm / 6mm Package Information: Package size: 9 * 6.7 * 3cm / 3.6 * 2.6 * 0.4in Package weight: 52g / 1.8oz Package List: 2 * Φ10mm White LED Light 2 * Φ6mm White LED Light

L8 LED Super Bright Lyssett 3.6-8.4V (1S-2S Lipo) (GTP100) Lyssett med 8stk kraftige super bright LED. Key Features Input Voltage DC 3.6V – 8.4V Max Current 220mA What’s in the Box 2x 10mm White LEDs with 350mm lead 2x 10mm Red LEDs with 350mm lead 2x 6mm White LEDs with 350mm lead 2x 6mm Red LEDs with 350mm lead 1x Receiver lead 280mm long For Power

LK-0001WT - Led Kit Ultra Bright 6 stk 5mm Led  Lyssett som tilkobles til 6.0V, leveres med tilkoblingskabel for mange tilkoblingmuligheter.   For: Crawler, 1/10 EP 4 Foran 5 mm hvit LED 2 Bak 5 mm rød LED For 6V bruk Inkluderer: LED-kabel (1 stk) Tilkoblingskabler (2 stk) LED-fester (6 stk)  

M1 LED Lyssett 3.4-8.4V (1S-2S Lipo) Lyssett med 6 stk LED. Kraftige 5mm led. Key Features Input voltage 3.4V – 8.4V (1S – 2S LiPo) Input current rate – Max 70mA What’s in the Box 1x JST Y lead 140mm long 2x 5mm Blue LEDs with 400mm lead 2x 5mm Red LEDs with 400mm lead 2x 5mm White LEDs with 400mm lead 1x JST – Futaba battery connector

RC-Led Light Kit 12 led lights for Cars and Truck Lyskit for bil/båt/fly med 12 led og modul for brems/blink front/baklys. This LED light kit is loaded with features that will make any radio control vehicle that much more awesome! Light up the night with these lights and you will never lose orientation when the vehicle is far away. Install them on your drift car for sick looking drifts. Rock them on your Touring car and have night race sessions. Light up the trail in your crawler and venture out at dusk or dawn. Throw them in your Monster Truck and do flips in the air with style. These LEDs will be an great addition to any RC model, plane, boat, car, you name it, the application is endless. The included left and right amber LEDs flash when you initiate steering input on your transmitter. The bright white LED headlights strobe as you smash the throttle, even better the tail lights light a bright red when you hit the brakes! The install is a breeze as they hook up inline between your servos and receiver.   5mm LED 2 X BLUE 4 X WHITE 2 X RED   3mm LED 4 X YELLOW

RC-Light Multicolor LED RGB m bryter Lyssterk, multicolor med 3 trinns dip switch max 12V. Trinn : 3 x blå led Trinn : 3 x rød led Trinn : 3 x grønn led trinn 1-2 : blå/hvit 3 x led trinn 1-2-3 : ultrabright 3 x led trinn 2-3 : gul/grønn 3 x led trinn 1-2 : rød/hvit 3 x led trinn 1-3 : lys blå Led 3 x 5x5mm på koblingsbord, med 3mm mellomrom totalt 21.3mm. Selve koblingsbord 48x10x6mm med Dipswitch Leveres med 20cm loddekabel for pålodding på koblingsbord.

65-10015 RC-Light Sinewinder Lightning System Sinewinder is an attractive, easy to use lighting system for your R/C vehicle. Just plug the Sinewinder light into a spare receiver channel, or use a separate 5V source. Sinewinder has 12 bright LEDs that scan from side to side, with a short trail after the leading light. The lights can be switched on and off by using your radio. If no signal is present or the signal wire is cut, the lights will default to being on.

RC-Light Super Bright LED 1 White Lyssterk, enkel led for max strømstyrke 2.5 - 3.0V med futabakontakt. Du kan for eksempel bruke to stykker AA Alkaline batterier i batteriholder som strømkilde. De er hver seg på 1.5V, utgjør sammen 3V. Man lodder gjerne flere LED sammen om flere ønskes i samme kjøretøy, som igjen loddes sammen med ledningene til batteriholderen. Lurt å bruke krympestrømpe for å isolere. Om ønskelig settes en bryter på en av ledningene til batteriholderen, eventuelt på hver led, dette for å kunne skru de av. ADVARSEL!: Skal man bruke den rett på mottaker med medfølgende påmontert mottakerplugg, så må man ha en mottaker som kan programeres til å gi riktig volt på kanalen du skal bruke.  

RER11650 - 16 LED Lyssett - Med Kontroll Boks for Red Cat Scout RER11650 med 16 LED-dioder hvor 12 er hvite og 4 røde. Diameter på diodene er 5mm. Inkludert i esken er kontrollmodul, 16 led-dioder, monteringstilbehør til modul, limpads og strips. Settet er vannbestandig, ikke beregnet for bruk under vann. Ledningslengder er dimensjonert for bruk på Gen8 Scout II. Settet kan fint brukes på andre 1/10 karrosserier i samme størrelse. Max 6.0V inn på kontrollboks

RS LED Bar - Roof Bar 18 LED 110mm (1) Kraftig LED-bar i metall for takmontering. Består av hele 18 LED-lys. I pakningen medfølger braketter, skruer og muttere for montering på ditt karosseri.   Spesifikasjoner Lysfarge Hvit Ledning ca. 29cm Bredde 110 mm Høyde 15 mm Dybde 15 mm

RS LED Bar - Roof Bar 24 LED 146mm (1) Kraftig LED-bar i metall for takmontering. Består av hele 24 LED-lys. I pakningen medfølger braketter, skruer og muttere for montering på ditt karosseri. Spesifikasjoner Lysfarge Hvit Ledning ca. 29cm Bredde 145 mm Høyde 15 mm Dybde 15 mm

Tamiya 54009 LED Light (3mm Red) (2) 3mm led pærer røde for bl.a TLU-01, denne har PH2.0 kontakt og passer ikke MFC Max 6.0V inn Hop-Up Options no.1009 Tamiya LED Light (3mm Red) Item No: 54009 ★These 3mm diameter red LEDs are for use with the Tamiya LED Light Unit (TLU-01). ★They recreate red taillights and brake lamps. ★Connectors ensure secure attachment. ★Two LEDs are included, plus clips for stowing cables. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54011 LED Light (5mm Yellow) (2) 5mm led pærer gule for bl.a TLU-01, denne har PH2.0 kontakt og passer ikke MFC Max 6.0V inn Hop-Up Options no.1011 Tamiya LED Light (5mm Yellow) Item No: 54011   ★These 5mm diameter yellow LEDs are for use with the Tamiya LED Light Unit (TLU-01). ★They are great for the recreation of fog lamps and the like. ★Connectors ensure secure attachment. ★Two LEDs are included, plus clips for stowing cables. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

WPT-0035 - Y-kobling-Paralell for JR til JR/JST Specification: Converts JR connector (Male) to JR connector (Female) or JST connector (Female/Esc side) Qty:1Pc Weight: 3g Length: - JR to JR: 3cm - JR to JST: 10cm

1/14 Arbeidslampe for 3mm Led (1) 1 stk arbeidslampe med festebrakett glass og beskytter. (leveres uten led) 1/10-1/14 Work Light Specifications: Stainless Steel ABS Plastic Injection Molding Laser Etching Total Length: 0.40in / 10.18mm Total Width: 0.33in / 8.48mm Total Height: 0.57in / 14.50mm Total Weight: 0.035oz / 1.0g   Shown installed on Tamiya 1/14 Scania Truck with Engine Cover for Tamiya 1/14 Scania (VVV-C0088) for example (Not Included)   Shown installed on RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) with 1/10 Tire Holder (D90/D110) (VVV-C0249) and Rear Ladder for Gelande II (D90/D110) (VVV-C0246) for example (Not Included) What’s Included: 1x 1/10-1/14 Work Light 1x Mount Plate 3x M1 x 6mm Cross Head Cap Screws (Black) 3x Regular M1.0 Nuts (Silver) Replacement Hardware: M1 x 6mm Cross Head Cap Screws (Black) Regular M1.0 Nuts (Silver) Optional Parts: 1/10-1/14 Work Lights (w/LED) (VVV-C0477) 1/10-1/14 Work Light (w/LED) (VVV-C0476) Notes: Fits RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) Fits Tamiya 1/14 Scania Truck To install, you will need to drill two 1mm mounting holes. Can be custom installed on any truck you desire.

2320086 -  Kabel klips 10x14mm (5) Kabelklips for å feste ledninger og diverse, med dobbeltsidig tape. Selvklebende klips for organisering av kabler. Fem klips i pakken.

500907039 - 3 Kamre Runde Baklamper for Henger-Lastebil (2) 2 stk runde 3 kammer beklamper for 4 stk 1.8mm SMD led. Festes med  skrue i midten. Størrelse: Ø - 11.07mm Tykkelse: 5.2mm

AX24251 - Axial NVS - Night Visions System The ultimate level in detail you can now add the NVS light system which features controls for headlights, tail lights, brake lights, and right/left turn signals, as well as some extra auxiliary lighting. • When going forward the headlights brighten, when the brakes are applied the brake lights will brighten • Turn left or right and the blinkers will signal your turn • The main control box is a nice compact size measuring 47x32x23mm ~ 1.8x 1.25x0.9” (Width x Depth x Height) • External on/off switch so you can mount it remotely to make it easier to reach • Separate on/off switch for auxiliary lighting mounted on main control box • Separate light connectors for up to 10 LED light strings • Additional/replacement LED light strings are available • Use Simple LED controller - AX24257 as an alternative   Includes the following LED light strings:      (1) Double LED light string for headlights (White LED)      (1) Double LED light string for brake lights (Red LED)      (2) Double LED light strings for turn signals (Orange LED)      (1) 5 LED light string for auxiliary lights (White LED) COMPATIBILITY PARTS GALLERY    

500907184 - SMD Led 1/14 PCB for Ekstralys 7.2V (2) Lyssterke Innsatser med SMD led for Carson ekstralys, ferdig loddet med ledning. Dim: 8.1x1mm (SMD led 1x1.9mm)

500907383 - Carson 1/14 Sidemarkeringslys Henger Rød 7.2-14V (2) Innhold: 2 markerings lys, 2 motstander.   Lampe med klart glass for 7,2 til 42 volt. Plast med limt SMD LED. Dim. LxBxH: 8x4x1,2mm,  kabellengde omtrent 200 mm.

500907384 - Carson 1/14 Sidemarkeringslys Henger Klare 7.2-14V (2) Innhold: 2 markerings lys, 2 motstander.   Lampe med klart glass for 7,2 til max 14 volt. Plast med limt SMD LED. Dim. LxBxH: 8x4x1,2mm,  kabellengde omtrent 200 mm.

500907385 - 1/14 Universal Printplate Led 6 kammer Set Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. Dette baklys settet kommer med 6 LED Beregnet for 7.2 volt, 1 par (1x venstre og 1x høyre side) SMD lysdioder, felles plus spol, 5 lysfunktioner, blinklys, bremselys, kjørelys + posisjonslys, ryggelys og tåkelys. Kabellengde på 500 mm. Egnet for art.nr. 500907038 (Baklys glasset er ikke med)

500907387 - 1/14 Universal Printplate Led 7 kammer Set Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. Elektronisk 7.2 volt, 1 par (1x venstre, 1x høyre) er utstyrt med SMD lysdioder, felles pluss pol. 4 belysning funksjoner: blinklys, baklys, bremselys og rygge lys. Kabellengde ca 250mm. Egnet for art.nr. 500907037  (Baklys glasset er ikke med)

500907389 - 1/14 MAN Lysprint Led Baklys 7.2V Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. Koblingskjema                              MAN baklys for 7.2V, med lysdioder. Kabellengde 250mm. 4 lysfunktioner (Blink, bremselys, baklys og ryggelys). Passer Tamiya MAN TGX. Innhold: 1 sett (1 hver høyre og venstre bord).

500907391 - 1/14 MAN Lysprint Led Frontlys 7.2V Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. MAN front lykter  For 7.2V. Egnet for Tamiya MAN TGX 5 belysning funksjoner: Blink lys foran, markerings lys, kjørelys, fjernlys og tåke lys.  Kabel lengde ca. 200 mm. Innhold: 1 sett (1 hver venstre og høyre), monteringsutstyr og instruksjoner. Koblingsskjema:

500907393 - 1/14 Grand Hauler Lysprint Led Bak 7.2V Komplett lysprint for bakfanger på Grand Hauler 4 lysfunksjoner: Blink signal høyre + til venstre i rødt, 3markeringer i rødt / bremselys lysere, reverserende spotlight, farget strenget kabel med en lengde på ca 55cm Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V.

500907556 - 1/14 MB Actros/Arocs Lysprint Led Baklys 7.2V Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. Merzedes Benz baklys  – 7.2V. Passer Tamiya MB Actros/Arocs. 4  funksjoner: blinklys, kjørelys, bremselys og ryggelys. Kabel lengde på ca 500 mm. Innhold: 1 sett (1 venstre og 1 høyre ) Instruksjoner.

500907558 - 1/14 MB Actros Lysprint Led Frontlys 7.2V Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. MB hovedlys 7.2V. Passer Tamiya MB Actros. 6 lys funksjoner: Blinklys fremme, sidemarkeringslys med blinklys funksjon (som på orginalen), parkeringslys, kjørelys, fjernlys og tåke lys.  Kabel lengde på omtrent 200 mm. Inneholder: 1 sett (1 venstre og 1 høyre ), monteringsutstyr og instruksjoner.

500907560 - 1/14 MB Actros/Arocs Sidemarkeringslys 3mm LED Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. MB side markeringslys For 7,2 og 12 volt. Passer Tamiya MB Actros. 2 tak markeringslys hvite, 2 markerings lys oransje. Kabellengde ca 300mm. Innhold: 1 sett (2 LED hvit, 2 LED oransje og kabel), instruksjoner.

500907561 - 1/14 CASCADIA Lysprint Led bak/midtlys 7.2V Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. Cascadia baklys 7.2V. Passer Tamiya Freightliner Cascadia. 5 belysnings funksjoner: blinklys høyre og venstre, kjørelys, bremselys og ryggelys.  Kabel lengde ca. 600 mm.