Traxxas Biler og Tilbehør

10234 - Nedre Støtdemperfeste Maxx Slash (F/V) Støtdemperfeste for forlenget vandring, monteres på bærearmer for å øke vandring på fjæringsvei. Shock mount, lower (extended travel, left & right/ 3x18mm BCS (2) Left and right extended lower shock mounts mount to the suspension arms to increase suspension down travel. Replacement part for these models: Maxx® Slash®

10290 - LED-lyssett komplett (inkl. forsterker #6590) Maxx Slash RASK OVERSIK PÅ FUNKSJONER FOR MAXX SLASH LED-LYSSETT (10290): Kompatibel med Velineon VXL-6s ESC Fullt fungerende bremselys som fungerer både forover og bakover Helt vanntett Tre standard lysmoduser kontrollert fra strømmen amplifier Innstillinger for nær- og fjernlys lysstyrke Enkel å installere med forenklede, skjulte, fargekodede ledninger Inkluderer støtfangere foran og bak med LED-utskjæringer Fastvare som kan oppdateres gjennom appen App-styrte belysningsfunksjoner:* - Slå lys på/av eksternt - Bygg et tilpasset dashbord - Tilpass lyskonfigurasjoner og handlinger - Legg til flere belysningskomponenter Maxx Slash redefinerer hastighet, holdbarhet og robusthet med sin innovative design og massivt overbygde chassis. Bare Traxxas kunne designe et LED-lyssett verdig Maxx Slashs ekstreme ytelse. Dette lette settet er bygget for å håndtere brutal straff i den virkelige verden, og er vanntett og bygget Traxxas Tough™ for maksimal moro. Bane vei gjennom natten med dette intense, hvite LED-lyssettet med høy effekt. Traxxas innovasjon leverer funksjoner og ytelse som ikke finnes på noe annet belysningssystem. Den medfølgende høyspenningsforsterkeren pakker muskler for å effektivt drive høyeffektslysstangen, samtidig som den minimerer tap fra overdreven strøm og varme. Den tett regulerte utgangen gir stabil lysytelse, uten flimring eller dimming når batterispenningen endres. De smarte bremselysene fungerer når bremsene aktiveres både forover og bakover. Dette eliminerer det vanlige og irriterende problemet med generiske ettermarkedssystemer som slår på bremselysene mens du rygger. MAXX SLASH LED-LYSSETT (10290) INKLUDERER: LED-lysstang foran med høy effekt Multifunksjons LED-lysstang bak Utskifting av støtfangere med LED-utskjæringer Høyspent 8-kanals effektforsterker for intens, strålende LED-belysning Regulert effekt for stabil lysytelse (ingen flimring eller dimming når batterispenningen endres) Montering av maskinvare

10530 - Titan 550 Drift Spec 21T Motor 14V (1) 550 driftspec 21T 14V motor med 3.17mm motoraksling

10537 - Svingarmsett (Steering Blocks) 4-Tec Drift Styrearmer for TRX 4-Tec Drift

10543 - Bell Cranks med monteringssett 4-Tec Drift Bellkrank for TRX 4-Tec Drift Steering Bellcrank Assembly w/ Hardware

10560 - Støtdemperfjærer for 8360 (1.057RATE) (2) Støtdemperfjærer for bl.a 4-Tec AWD og Drift Korte Ultra Shock-fjærer tilbys i ulike fastheter for å justere fjæringsytelsen eller kompensere for lettere eller tyngre kjøretøykonfigurasjoner. Jo høyere fjærrate, desto fastere blir fjæren. (1,057-rate) (1 par)  

10570 - Dekk 1.9" Front Harde (Utendørs) 4-Tec Drift Tires, 1.9" Drift (1 dot, hard, rough surfaces)) (front) (2)/ rubber inserts (2)

10571 - Felger 1.9" 6 Spoke Grå Front 4-Tec Drift (2) Wheels, 1.9" six spoke (graphite gray w/chrome rim) (front) (2)

10572 - Felger 1.9" 6 Spoke Grå Wide Bak 4-Tec Drift (2) Wheels, 1.9" six spoke (graphite gray w/chrome rim) (wide, rear) (2)

10573 - Dekk 1.9" Bak Harde (Utendørs) 4-Tec Drift Tires, 1.9" Drift (1 dot, hard, rough surfaces) (rear) (2)/ rubber inserts (2)  

10578 - Dekk 1.9" Front Myke (Innendørs) 4-Tec Drift Tires, 1.9" Drift (2 dots, soft, smooth surfaces)) (front) (2)/ rubber inserts (2)

10580 - Dekk 1.9" Bak Myke (Innendørs) 4-Tec Drift Tires, 1.9" Drift (2 dots, soft, smooth surfaces)) (rear) (2)/ rubber inserts (2)  

10761 - Hoveddrev 47T 0.8M-32P Midt Diff Mini XRT-Rally (1) 47T 0.8M drev for midt differensial på XRT-Rally, Option for Mini Maxx-Slash The 47-tooth center differential spur gear (32-pitch) must be used with optional center differentials 10760 or 10760R. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

108046 - Pinion 23T Steel 0.8M-32P 3.17mm Aksling (1) 23-tooth pinion gear (32 pitch) fits 3 mm motor shafts and includes set screw. (For use with steel spur gears) Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

10872 - Mini Rally Front Hjul Hard (2) Mini Rally forhjul er hardere enn bakdekk for å opprettholde rallyens overlegne kjøreegenskaper og balanse. Mini Rally-dekk gir utmerket grep på asfalt, grus,m.mer, med et unikt retningsbestemt mønster. Dekkene kommer forhåndslimt og montert på hvite 8-eikers Rally-felger med 12mm hex. Solgt som et par i enten helhvit eller med chrome stripe. Spesifikasjoner:  Høyde*     : 74mm Bredde     : 33.6mm Yttre felg  : (H*) 50.8mm (2") Indre felg : (H*) 62.7mm (2.5") Felg Bredde : 33mm Hex : 12mm

10873 - Mini Rally Hjul Bak Soft (2) Mini Rally bakhjul er mykere enn framdekk for å opprettholde rallyens overlegne kjøreegenskaper og balanse. Mini Rally-dekk gir utmerket grep på asfalt, grus,m.mer, med et unikt retningsbestemt mønster. Dekkene kommer forhåndslimt og montert på 8-eikers Rally-felger med 12mm hex. Solgt som et par. Spesifikasjoner:  Høyde*     : 74mm Bredde     : 33.6mm Yttre felg  : (H*) 50.8mm (2") Indre felg : (H*) 62.7mm (2.5") Felg Bredde : 33mm Hex : 12mm

10875 - Mini Rally Bak Hjul Slicks Soft (2) Mini Rally Speed Slick, designet for 3S børsteløs power, gir maksimal veigrep på asfalten for fantastisk akselerasjon og grep i svingene. Nøkkelen er en gummiblanding med høyt grep som er over dobbelt så tykk som standarddekkets karkasse. Resultatet er utmerket grep med langvarig holdbarhet for pakke etter pakke ytelse på asfalt. Rear Speed Slick-dekk er mykere for å opprettholde rallyens overlegne kjøreegenskaper og balanse. Dekkene kommer forhåndslimt og montert på svarte 8-eikers Rally-felger. Passer 12 mm sekskant. Spesifikasjoner:  Høyde*     : 74mm Bredde     : 33.6mm Yttre felg  : (H*) 50.8mm (2") Indre felg : (H*) 62.7mm (2.5") Felg Bredde : 33mm Hex : 12mm

10876 - Mini Rally Front Hjul Slicks Hard (2) Mini Rally Speed Slick, designet for 3S børsteløs power, gir maksimal veigrep på asfalten for fantastisk akselerasjon og grep i svingene. Nøkkelen er en gummiblanding med høyt grep som er over dobbelt så tykk som standarddekkets karkasse. Resultatet er utmerket grep med langvarig holdbarhet for pakke etter pakke ytelse på asfalt. Front Speed Slick-dekk er hardere enn bakdekk for å opprettholde rallyens overlegne kjøreegenskaper og balanse. Dekkene kommer forhåndslimt og montert på svarte 8-eikers Rally-felger. Passer 12 mm sekskant. Spesifikasjoner:  Høyde*     : 74mm Bredde     : 33.6mm Yttre felg  : (H*) 50.8mm (2") Indre felg : (H*) 62.7mm (2.5") Felg Bredde : 33mm Hex : 12mm

1552 - Hex Motor Screws (4) Motorfeste skruer med unbrakohode+nøkkel  6 stk 3x8mm Unbrako tønne hode skruer  6 stk 3mm skiver  1 stk 2,5mm Unbrakonøkkel Backplate screws (3x8mm cap-head machine) (6)/washers (6)/ wrench Upgrade your Phillips-head motor mount screws with these 3x8 mm cap-head machine screws and washers. Includes wrench. Replacement part for these models: Ford® Fiesta® ST Rally Hoss® 4X4 VXL Maxx® Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 Summit TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® 2021 Ford® Bronco TRX-4® Equipped with Traxx® TRX-4® Mercedes-Benz® G 500® 4X4² TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX® Pro .15 XO-1® Accessory part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

1651 - Half Shafts U-Joints (2) Includes:          (2) inside shafts          (2) outside shafts          (4) universal joints (metal balls with 4 pins sticking out in a cross              pattern) Dimensions: Compressed length: 1 11/16" This is a pair of half shafts (swing shafts or dog bones) For The Traxxas Bandit And Others TRX 1651 Replacement part for these models: Bandit® VXL Bandit®

1654 - Wheel Hubs 6 Kant 12mm - 2stk 6x12x5mm plasthex med to 2x10mm pin. Replacement part for these models: Bigfoot® No. 1 Officially Licensed Replica Ford F-150 Raptor Ford Fiesta® ST Rally Hoss™ 4X4 VXL Jato Nitro Rustler Nitro Slash Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 Stampede® VXL Stampede®

1654R - Wheel Hubs Stål (2) Aksel Pins 2x10mm (2) 6x12x5mm hex med to 2x10mm pin. 12 mm steel wheel hex hubs provide superior strength and durability for high-horsepower applications. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash® 4X4 VXL Ford® F-150® Raptor R™ 4X4

1654X -12mm Wheel Hubs Aluminium - 2stk 6x12x5mm hex med to 2x10mm pin. Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins (2) Not only are these aluminum hex wheel hubs as tough as nails, they’re blue-anodized to make your ride look even sharper! Traxxas machines them for the highest precision and incredible detail. Accessory part for these models: Drag Slash Ford® Fiesta® ST Rally Hoss® 4X4 VXL Rustler® 4X4 VXL Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Jato® Rustler® 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4

1657 - Silicon Grease High Performance (1) 1tb med ca 2,95 ml silikonfett for bruk i differensialer/girkasser/drev +++

1747 - Mutter Blank 4mm Nylock/Låsemutter (10) 4mm låsemutter for 7mm nøkkel med nylock  Set of ten 4 mm Nylon locking nuts Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica DCB M41 Widebody Drag Slash Ford® F-150 Raptor Ford® Fiesta® ST Rally Hoss® 4X4 VXL Jato® Nitro Rustler® Nitro Slash Rustler® 4X4 VXL Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash 4X4 VXL Slash 4X4 Slash VXL Slash Spartan® Stampede® VXL Stampede® Accessory part for these models: Rustler® 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4  

1765 - Rubber Diaphragm Plastic Shock 13mm (4) These rubber cap diaphragms for Traxxas plastic shocks, also work well with Associated aluminum shocks. Qty-4 13mm Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Chevrolet® Corvette® Stingray Drag Slash Ford® F-150 Raptor Ford® Fiesta® ST Rally Ford® GT Ford® Mustang GT Hoss® 4X4 VXL Nitro Rustler® Nitro Slash Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash 4X4 VXL Slash 4X4 Slash VXL Slash Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 Stampede® VXL Stampede® T-Maxx® Toyota® GR Supra GT4®

1815 - Body Washers (8) FEATURES:  Nylon construction            Helps prevent the body mount hole from cracking prematurely            White in color SPECS:     Outer Diameter: 0.87" (22mm)            Inner Diameter: 0.26" (6.7mm)  

1834 - Klips til karosseri medium størrelse 12stk Liten til medium størrelse, rett tynn klips for bruk på utallige modeller. Lengde : Total 22.6mm Ø stolper : Max 5mm Fjærstål : 1mm Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Jato® Nitro Rustler® Revo® Rustler® VXL Rustler® Slayer® Pro 4X4 Stampede® VXL Stampede® T-Maxx® TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® Equipped with Traxx® TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-6® Ultimate RC Hauler Accessory part for these models: Revo® Slayer® Pro 4X4 Summit TRX-4® 1979 Chevrolet® Blazer TRX-4® Equipped with Traxx® TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-6® Ultimate RC Hauler

1834A - Klips til karosseri SORTE medium-liten størrelse 12stk Liten til medium størrelse, rett tynn klips for bruk på utallige modeller. Lengde : Total 22.6mm Ø stolper : Max 5mm Fjærstål : 1mm Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Jato® Nitro Rustler® Revo® Rustler® VXL Rustler® Slayer® Pro 4X4 Stampede® VXL Stampede® T-Maxx® TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® Equipped with Traxx® TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-6® Ultimate RC Hauler Accessory part for these models: Revo® Slayer® Pro 4X4 Summit TRX-4® 1979 Chevrolet® Blazer TRX-4® Equipped with Traxx® TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-6® Ultimate RC Hauler

1844X - Traxxas Servo Saver Large 25T Servosaver med 25T splines, passer alle servoer med 25T Servosaveren beskytter styreservoen din ved å absorbere støt som ellers kan forårsake innvendig girskade. Inkluderer adaptere og 3x14 mm skrue. FEATURES: Tough white plastic construction. INCLUDES: 1 large servo saver and 3 adaptors that allow you to mount the saver on most popular servos including: Futaba, Hobbico, PowerHD, Airtronics and Traxxas. Also included is a mounting screw. SPECIFICATIONS: Length: 1-3/8"                 Diameter: 1"                 The servo saver has 6 holes for mounting the steering linkages Replacement part for these models: Bigfoot® No. 1 Officially Licensed Replica Stampede® VXL Stampede®

1914R - Karosserifeste Foran/Bak Karosserifester for bl.a Rustler,Slash 2WD, Raptor 2WD, Stampede 2WD(Big Foot,Craniac,Skully) Body mount, front & rear (black)/ body posts, 52mm (2), 38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (4)/ hardware

Pinion 18T 48P 3,2mm aksel. Brass, 48 pitch, 18 tooth pinion gear.             Shaft length- 3/16"  Gear length- 1/4"  Overall length- 7/16"             Shaft diameter- 1/4"  Gear diameter- 7/16"             Mounting shaft (motor shaft) 1/8"

1935 - Turnbuckles 3x36mm (2) 3x36mm Styre/Stabstag med gjenger i begge ender(en ende med ccw gjenger)

1937 - Turnbuckles 54mm (2) 3x54mm Styre/Stabstag med gjenger i begge ender(en ende med ccw gjenger) METAL TURNBUCKLES: Replace the non-adjustable camber links on your Rustler with these versatile metal turnbuckles that allow trackside camber adjustment. (Requires #2742 rod ends/ball connectors) Turnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber links)

1942 - Rod Ends 3mm (16 long & 4 short) Ball ends for 3mm stag, leveres med 18 lange og 4 korte inkl metall kuler. Set of replacement rod ends with 16 long ends and 4 short ends. Includes hollow ball connectors (18) and ball screws (2). Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Chevrolet® Corvette® Stingray Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Ford® F-150 Raptor Ford® Fiesta® ST Rally Ford® GT Ford® Mustang GT® Hoss® 4X4 VXL Nitro Rustler® Nitro Slash Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash 4X4 VXL Slash 4X4 Slash VXL Slash Stampede® 4X4 VXL Stampede® 4X4 Stampede® VXL Stampede® T-Maxx® Toyota® GR Supra GT4® Accessory part for these models: Hoss® 4X4 VXL Nitro Rustler® Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate  

1951 - Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4) Replacement part for these models: Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Nitro Rustler Rustler® VXL Rustler® Slash Stampede® VXL Stampede®

1952 - Stub Axle Housing Rear (2) Replacement part for these models: Ford Fiesta® ST Rally Nitro Rustler Nitro Slash Nitro Sport Nitro Stampede Rally VXL Rustler 4X4 VXL Rustler 4X4 Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede 4X4 Unassembled Kit Stampede 4x4 VXL Stampede 4x4 Telluride 4x4 Accessory part for these models: Slash 4X4 Ultimate

1985 - Fiber Washers 5x8mm (20) 20 stk teflonfiberskiver for bruk som clutch/lagerskims m.m. 5x8mm FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

1994 - Slipper Tension Spring Mutter, fjær, bøssing for spurdrev, passer SMT Valiant/Magic Wheel 1/8, orginal på Traxxas T-E-Maxx, Nitro Slash/Rustler This is the replacement slipper tension spring set for the Traxxas kits that have slipper clutches (Rad 2, Hawk 2, TRX-1, Blue Eagles). PACKAGE INCLUDES:    Slipper tension spring (1)    Teflon spur gear bushing (1) -- white    4mm Locknut with nylon insert (1) Replacement part for these models: Nitro Rustler Nitro Slash T-Maxx

2053 - Servo Gears 2055/2056 Servo INCLUDES: One 25 and 41 tooth output gear.           One 35 and 16 tooth gear (gear #7).           One 10 and 62 tooth gear (gear #9).           One 10 and 50 tooth gear (gear #11).           One 10 tooth pinion gear.           One grey plastic bushing race.           One grey plastic output gear race.           Two brass output gear bushings.           One exploded view.

2065R - Servo Sub-Micro 25T Std Splines Metal Gear WaterProof Servo, sub-micro, waterproof, metal gear The 2065R waterproof sub-micro servo adds the superior durability of all-metal gears for the best driving experience possible. Max 6.0V Spesifikasjon: Lengde : 23mm Høyde : 24mm Bredde : 12.8mm Accessory part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton® Summit 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

2065T - Servo Sub-Micro 25T Std Splines WaterProof The 2065T waterproof sub-micro servo features a metal main gear for precise control and powerful steering authority. Max 6.0V Spesifikasjon: Lengde : 23mm Høyde : 24mm Bredde : 12.8mm

2085X - Digital 32,2Kg/cm Servo Kulelagret MG Vanntettet for X-Maxx Oppgraderingsservo med kulelager og metalldrev for X-Maxx, denne gir opptil 23% mere svingkraft enn orginalservoen. Leveres med stål styrestag og sterkere servosaverfjær. X-Maxx steering servo includes full metal gears and adds a massive 23% more torque to take on the most extreme environments. The kit also includes a stiffer servo saver spring and steel steering linkage for increased precision and control during high speed driving. Maks spenning: 6V Hastighet 0,19sek/60grader Styrke: 32,2 Kg/cm FEATURES Ball bearing equipped Preinstalled aluminum heat sink to help dissipate heat and prolong servo life, stiffer servo saver spring and steel steering linkage     INCLUDES High-Torque Digital Waterproof Steering Servo with Metal gear, Wire Lead, Connector, stiffer servo saver spring and steel steering linkage.     SPECIFICATIONS Torque: 32.2kg-cm Speed: 0.19 sec/60° @ 6V Dimensions: 1.97 x 2.0 x 0.98" (50 x 51.5 x 24.9mm) not including heat sink. Weight: 137g including heat sink, servo saver spring and steel steering linkage.

2262 - Ekstern Traxxas BEC incl motakerboks Cover and Seals Komplett ekstern BEC for Traxxasmodeller som trenger mere output til servo. BEC, complete (includes receiver box cover and seals) Accessory part for these models: TRX-4® 1979 Chevrolet Blazer TRX-4® Equipped with Traxx™ TRX-4® Ford Bronco TRX-4® Mercedes-Benz® G 500® 4X4² TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6™ Mercedes-Benz® G 63® AMG 6X6

2334 - Turnbuckles 50mm (2) 3x50mm Styre/Stabstag med gjenger i begge ender(en ende med ccw gjenger) METAL TURNBUCKLES: Replace the non-adjustable camber links on your Rustler with these versatile metal turnbuckles that allow trackside camber adjustment. (Requires #2742 rod ends/ball connectors) Turnbuckles (50mm) (2)

2335 - Turnbuckles 72mm (2) 3x72mm Styre/Stabstag med gjenger i begge ender(en ende med ccw gjenger) METAL TURNBUCKLES: Replace the non-adjustable camber links on your Rustler with these versatile metal turnbuckles that allow trackside camber adjustment. (Requires #2742 rod ends/ball connectors) Turnbuckles (72mm) (Tie rods or optional rear camber rods) (2) Replacement part for these models: Slash 4X4 Stampede® 4X4

2381X - Main Diff with Steel Ring gear/ side cover plate/ screws (Bandit, Stampede, Rustler) Replacement part for these models: Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Rustler® VXL Rustler® Slash VXL Slash Stampede® VXL Stampede® Model# 2381X $6.00 BUY NOW

2382 - Planet Gear Shafts (4) Differensialdrev for flere av Traxxasproduktene. Bruk manual. Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel Replacement part for these models: Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Nitro Rustler Nitro Slash Rustler® VXL Rustler® Slash VXL Slash Stampede® VXL Stampede®

2388X - Planetary Gear Differential w/Steel Ring Gear (complete) (fits Bandit, Stampede, Rustler, Slash, Grinder, grave digger) FEATURES: Metal gear shafts           Metal and plastic main differential INCLUDES: Main differential with steel ring gear           Planetary gears and shafts           Sun gears and shafts           Silicone  grease Complete planetary gear differential (unassembled) for Magnum 272™ transmissions. Includes metal ring gear, hardened-steel internal gears, gear shafts, and screws. Also available as a completely assembled Pro-Built differential. Does not fit Magnum 272R transmission Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

2416 -  Steel Pinion Gear 48P 16T w/Set Screw  INCLUDES: 16 Tooth 48 Pitch Pinion Gear with set screw 16t stålpininon 48p med 3mm låseskrue for 3.17mm motoraksel SPECS:    Number of Teeth: 16T           Pitch: 48           Inner Diameter: 0.12" (3mm) Replacement part for these models: Ford® F-150 Raptor Rustler® Slash 2WD Unassembled Kit Slash Stampede® Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ Bandit® VXL Bandit® Ford® Fiesta® ST Rally Rustler® VXL Stampede® VXL BIGFOOT® No. 1 Officially Licensed Replica Drag Slash Slash VXL

2419 - Pinion Gear 19T 48P 3mm w/Set Screw (Steel) 19t pinion for 3.17mm aksling 48P Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Replacement part for these models: Stampede® VXL Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Bandit® VXL Bandit® Chevrolet® Corvette® Stingray Drag Slash Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck Ford® Fiesta® ST Rally Ford® GT Ford® Mustang GT Rustler® VXL Slash VXL Toyota® GR Supra GT4® BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Rustler® Slash 2WD Unassembled Kit Slash Stampede®

2421 - Pinion Gear 21T 48P 3mm w/Set Screw (Steel) 21T pinion for 3-3.17mm aksling 48P 21-tanns motordrev (48-pitch) passer til 3-3.17 mm motoraksler og inkluderer 3mm settskrue. Traxxas piniongdrev lar deg finjustere ytelsen til din Traxxas-modell. Endring av girforhold kan bidra til å balansere akselerasjon og topphastighet for ulike kjøreforhold. Se brukerhåndboken for mer informasjon om anbefalte drevalternativer for din spesifikke modell. Replacement part for these models: 1/16 Summit™ 4-Tec® 2.0 AWD Chassis Bandit® Ford® GT Ford® Mustang GT® Stampede® Accessory part for these models: 4-Tec® 2.0 Brushless AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Chevrolet® Corvette® Stingray Factory Five '33 Hot Rod Coupe Stampede® VXL Toyota® GR Supra GT4®

2423 - Pinion Gear 48P 23T 3mm w/Screw  23t pinion for 3.17mm aksling 48P FEATURES: Steel construction, silver in color INCLUDES: One 23 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .58" (14mm) Replacement part for these models: 1/16 E-Revo® Slash VXL Accessory part for these models: 1/16 E-Revo® VXL 1/16 Slash 4WD 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Bandit VXL Bandit Ford Fiesta® ST Rally Ford GT® Ford Mustang GT Rustler® VXL Stampede® VXL Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Rustler® Slash 2WD Unassembled Kit Slash Stampede®

2424 - Pinion Gear 48P 24T 3mm w/Screw  24t pinion for 3.17mm aksling 48P tanning FEATURES: Steel construction, silver in color INCLUDES: One 24 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .58" (14mm) Accessory part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Ford GT® Ford Mustang GT

2426 - Pinion Gear 48P 26T w/Screw 26T pinion for 3.17mm aksling FEATURES: Steel construction, silver in color INCLUDES: One 26 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .58" (14mm)

2428 - Pinion Gear 48P 12T w/Set Screw  12t 48P motordrev for 3.17mm motoraksel. SPECS:    Number of Teeth: 12T           Pitch: 48           Inner Diameter: 0.12" (3mm) Replacement part for these models: Ford Fiesta® ST Rally Accessory part for these models: 1/16 Slash 4WD

2431 - Pinion Gear 48P 31T Steel w/Screw  31t stål pinion for 3.17mm motoraksel This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, INCLUDES: One 31 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .69" (17.5mm) Accessory part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD Bandit VXL Bandit Ford Fiesta® ST Rally Rustler® VXL Stampede® VXL Ford F-150 Raptor Slash VXL Slash

2432 - Caster Blocks (Venstre-Høyre) 30°  Hjulhuber foran for 2WD Bandit og Drag Slash

2435 - Pinion Gear 48P 35T Steel w/Screw  35T Stålpinion 48P for 3.17mm motoraksel This is a 35 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, INCLUDES: One 35 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size)   Replacement part for these models: 4-Tec® 2.0 VXL AWD Chassis Accessory part for these models: Bandit VXL

2437 - Hjulakslinger Foran Bandit-Drag Slash (2) 2 hjulakslinger med 2 stk 4mm nylon mutter Replacement part for these models: Bandit® VXL Bandit® Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0

2443 - Turnbuckles Camber Link 4x36mm (2) FEATURES:                      Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends INCLUDES: Two rear 36mm (56mm center to center) turnbuckles Replacement part for these models: Bandit VXL Accessory part for these models: Bandit  

2444 - Turnbuckles - Camberstag 4x47mm (67mm CC) (2) Justerbare camberstag med stålkuler i ball ends for 3mm skruer. Turnbuckles, camber link, 47mm (67mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right) Upgrade your standard front camber links with these left and right 47 mm adjustable steel turnbuckles (67 mm center to center). Steel turnbuckles are stronger than composite turnbuckles and allow you to dial in the perfect camber settings. Comes assembled with rod ends and hollow balls.   Replacement part for these models: Bandit® VXL Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Accessory part for these models: Bandit®

2445 - Turnbuckles - Styrestag (Toe) 4x55mm (75mm CC) (2) Justerbare styrestag med stålkuler i ball ends for 3mm skruer. Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls) Replacement left and right 55 mm steel toe links (75 mm center to center). Adjustable steel turnbuckles allow you to dial in the perfect toe settings. Comes assembled with rod ends and hollow balls.   Replacement part for these models: Bandit® VXL Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Accessory part for these models: Bandit®

2457 - Spring Rear Black (2) Black standard springs fit XX-long Ultra Shocks Accessory part for these models: Bandit® VXL Bandit®

2457P - Spring Rear Pink (2) Pink standard springs fit XX-long Ultra Shocks Accessory part for these models: Bandit® VXL Bandit®

2458 - Spring Front Black (2) Black standard springs fit long Ultra Shocks Accessory part for these models: Bandit® VXL Bandit® Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Ford® F-150 Raptor Nitro Rustler® Nitro Slash Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash

2458P - Spring Front Pink (2) Pink standard springs fit long Ultra Shocks Accessory part for these models: Bandit® VXL Bandit® Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Ford® F-150 Raptor Nitro Rustler® Nitro Slash Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash

2470A - Dekk Alias og Felg Tracer 2.2" TSM Rated (2) 2 stk komplette ferdig limte hjul for bl.a Bandit VXL, disse er TSM rated og forsterket i sidevegg. Tires & wheels, assembled (Tracer 2.2" black chrome wheels, Alias® 2.2" tires) (2) (Bandit rear, medium compound with foam inserts) (TSM® rated) Alias® step-pin tires provide excellent traction in dirt and other loose surfaces. Tires come pre-glued and mounted to 2.2″ Tracer black chrome rear wheels with foam inserts. TSM®-rated for high-speed applications. Replacement part for these models: Bandit® VXL Accessory part for these models: Bandit® VXL

2470R - Dekk Alias og Felg Tracer Chrome 2.2"  (2) 2 stk komplette ferdig limte hjul for bl.a Bandit 2WD Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias® 2.2" tires) (2) (Bandit rear, medium compound with foam inserts) Alias® soft compound step-pin tires provide excellent traction in dirt and other loose surfaces. Tires come pre-glued and mounted to 2.2″ Tracer bright chrome rear wheels with foam inserts. Replacement part for these models: Bandit® Accessory part for these models: Bandit® Bandit® VXL

2471A - Dekk Alias Medium og Felg Tracer 2.2" Front (2) 2 stk komplette ferdig limte forhjul for bl.a Bandit VXL. Alias-riflede dekk med middels blanding gir utmerket grep på jord og andre løse underlag. Dekkene kommer forhåndslimt og montert på 2,2" Tracer svart krom framfelger med skuminnlegg. Replacement part for these models: Bandit® VXL Accessory part for these models: Bandit® VXL

2471R - Dekk Alias Medium og Felg Tracer Chrome 2.2" Front (2) 2 stk komplette ferdig limte forhjul for bl.a Bandit VXL. Alias-riflede dekk med middels blanding gir utmerket grep på jord og andre løse underlag. Dekkene kommer forhåndslimt og montert på 2,2" Tracer blank krom framfelger med skuminnlegg. Replacement part for these models: Bandit® VXL Accessory part for these models: Bandit® VXL

2514 - Traxxas Sponsor Decal Sheet This is a Sponsor Decal Set for R/C Cars from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and             truck bodies.           Pressure sensitive, peel and stick vinyl decals.           These are the contingency/sponsorship decals that are used on race             cars.           Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD,             Mr. Gasket, NOS, Accel, Hurst, and more.           Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS:    Length: 9-1/8" (23.2cm)           Width:  5-1/8" (13.0cm)

2524 - Skruer 2.5x8mm Senkeskruer Maskingjenger (6) 6 stk senkeskruer for 2mm unbrako som passer en rekke modeller Kan brukes som erstatning for ARA702016 Replacement part for these models: Jato® TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™ TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Land Rover® Defender® TRX-4® Sport High Trail Edition™ TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-6® Ultimate RC Hauler Unlimited Desert Racer® XO-1®

2530 - Front Bulkhead Stampede/Rustler/Bandit/Slash(Sort) Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica Drag Slash 1967 Chevrolet® C10 Truck Ford® F-150 Raptor Accessory part for these models: Bandit® VXL Bandit® Nitro Rustler® Nitro Slash Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

2530-GRAY - Bulkhead Front Stampede/Nitro Rustler Replacement part(s) for these models: Bandit XL-5 w/BatteryModel #24254-8 BIGFOOT No. 1 BL-2sModel #36334-4 BIGFOOT No. 1 XL-5 w/BatteryModel #36234-8 Ford F-150 Raptor 2WD BL-2sModel #58394-4 Rustler 2WD BL-2sModel #37354-4 Rustler 2WD XL-5 w/BatteryModel #37254-8 Slash 2WD BL-2sModel #58334-4 Slash 2WD BL-2s KitModel #58314-4 Slash 2WD VXLModel #58376-74 Slash 2WD XL-5 w/BatteryModel #58234-8 Stampede 2WD BL-2sModel #36354-4 Stampede 2WD XL-5 w/BatteryModel #36254-8  

1 par bærearmer for Traxxasbilene, bruk manualen. FUNKSJONER: Nylon konstruksjon Svart i fargen INKLUDERER: To svarte nylonopphengsarmer KREVER: Montering på sett. KOMMENTARER: Dette vil fungere på Bandit, Nitro Stampede, Nitro Rustler, SRT og Nitro Sport.

2532 - Tie Bar Fiberglass SRT/Rustler Tie bar, fiberglass The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installation. Replacement part for these models: Bandit® VXL Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Ford® F-150 Raptor Nitro Rustler® Nitro Slash Rustler® VXL Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL

2534 - Senkeskrue Unbrako 3x6mm Maskingjenger (6) 3x6 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for these models: BIGFOOT® 4X4 Brushless Officially Licensed Replica Ford Fiesta® ST Rally Ford® Fiesta® ST Rally Brushless Ford® Fiesta® ST Rally Hoss® 4X4 VXL Jato® 4X4 Brushless Jato® 4X4 VXL Rustler® 4X4 Brushless Rustler® 4X4 Ultimate Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL EHD Stampede® 4X4 Brushless Stampede® 4X4 VXL Unlimited Desert Racer®

 2536 - Steering Block/Spindles 2p These are Replacement Steering Blocks and Wheel Spindles       for the Traxxas Nitro Rustler, Nitro Stampede, and Nitro Sport FEATURES: Black Plastic Steering Blocks           Aluminum Wheel Spindles INCLUDES: Two Steering Blocks           Two Wheel Spindles

2546 - Skruer 4x15mm Senkehode Maskinskrue (6) 6 stk maskingjenget skrue med Hex- 2.5mm unbrako for bruk på en rekke modeller. Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Ford Fiesta® ST Rally Ford® F-150 Raptor Ford® F-150® Raptor R™ 4X4 Ford® F-150® Raptor Ford® Fiesta® ST Rally Brushless Ford® Fiesta® ST Rally Hoss® 4X4 VXL Rustler® 4X4 Brushless Rustler® 4X4 Ultimate Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL Slash® Brushless Slash® VXL Slash® Sledge® Stampede® 4X4 Brushless Stampede® 4X4 VXL Stampede® Unlimited Desert Racer® X-Maxx® Ultimate X-Maxx® XO-1® XRT® Ultimate XRT®