Løten RC Shop AS
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Stort utvalg og god Service

Vår kunnskap, din trygghet

Gi en rating på Google

Beier Data Kabel LogiLink K-USB-2

Art.nr: K-USB-2
349,-

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

1 På lager

Beier Data Kabel LogiLink K-USB-2



You can connect your sound modules SFR-1USM-HL-2USM-RC-2 and the speed controller UFR-1230/UFR-1230-D with this cable to your PC. You only need a USB port for this.

The data cable K-USB-2 has two functions:

Function 1: Live diagnosis
Using the data cable you can monitor simultaneous in your Sound-Teacher the current settings and transmitted data while you are triggering functions. You can check the diagnosis data for example of the status (received values) of your proportional channels, your in- and outputs and your nautic values. This function is very helpful for troubleshooting.

Your SFR-1, USM-HL-2 and USM-RC-2 can also save the diagnosis data on your SD card (without data cable). To use this function you need to activate it in your Sound-Teacher first. You can check the received values/recorded data with the diagnosis function of your Sound-Teacher. However, without data cable you can only check previous values and not the current "live" values. 

Function 2: Transfer of configurations and sounds from Sound-Teacher/Drive-Teacher to USM-HL-2, USM-RC-2 and to speed controller UFR-1230/UFR-1230-D.
Using the data cable you can transmit or change sounds and settings of your sound module without removing the SD card. Normally if you want to configure your sound module you need to remove the SD card from your model, insert it in your SD card reader of your PC and save the new setting with the Sound-Teacher. This can be quite impractical if you need to change configurations very often for example when you want to test different settings. 

However, transferring sounds with the data cable K-USB-2 might take a few minutes! A sound with a length of 10 seconds takes about 60 seconds until it is transferred. Very long songs and large, new projects are only restrictively recommended to be transferred with the data cable.

 

You can also download the Prolific Technology Inc. with following link Prolific hardware driver.

In a few cases you might get problems using the data cable K-USB-2 with Windows 7, Windows 8 and Windows 10 due to Windows (not working) hardware driver. You can read on the following link how to install and use our (working) hardware driver. You can find the driver software on the DVD-ROM of your USM-HL-2/USM-RC-2. 
 

Kommentarer

Share |
Beier -Electronic

Beier -Electronic


Leverandær av elektronikk til RC, lyd/lysmoduler osv

Relaterte produkter

  • Bilde av Beier SFR-1 ESC/Lyd/Lys ...

    Varenr SFR-med_DVD

    Beier SFR-1 ESC/Lyd/Lys Modul med DVD (FRI FRAKT) Butikkpris 3799,- Avansert og...

    3.949,-

Kunder kjøpte også

Trykk ENTER for å søke