Deler Rc fly, elektro, fuel

Dubro's Nylon Landing Gear Straps are molded to fit 1/8" music wire. Comes with 4 straps and 8 screws. DUBRO238 - Nylon Large Landing Gear Straps 1/8" (4)

DUBRO239 - These are 5/32" Nylon Landing Gear Straps.FEATURES: Nylon construction (White)           Molded to fit 5/32" (4mm) music wire INCLUDES: Four nylon straps           Eight #2 (.087")x7/16" self tapping bind screws REQUIRES: Installation.           A flathead (slotted) screwdriver for the screws SPECS:    Length:    .75"           Width:     .311"           Height:    .191"           Thickness: .10"

DUBRO246 - Axle Shaft 1/8x1-1/4" (2) These are 1/8"x1.25" Axle Shafts. FEATURES Zinc plated spring steel construction. INCLUDES Two axle shafts Two 1/4"nylon lock nuts (DUBQ3366) REQUIREMENTS Minimal mechanical knowledge 7/16" wrench for the nuts 3/8" wrench for the axle SPECIFICATIONS Length: 1.25" (axle) .325 (thread) 1.7" (total length) Diameter: 1/8" (axle) 1/4"(thread)

DUBRO247 - Axle Shaft 5/32x1-1/4" (2) These are Axle Shafts from Du-Bro FEATURES Spring steel construction INCLUDES Two axles with lock nuts SPECIFICATIONS Length: 47.3mm (1-7/8") overall end to end 31.8mm (1-1/4") axle length 12.6mm (1/2") thread length Diameter: 4mm (5/32") axle dia. 7.9mm (11/32") thread dia.

DUBRO248 - Axle Shaft 4x50mm (2) These are 5/32"x2" Axle Shafts. FEATURES Zinc plated spring steel construction INCLUDES Two axle shafts Two 5/32"nylon lock nuts SPECIFICATIONS Length: 2" (axle) .4" (thread) 2.6" (total length) Diameter: 5/32" (axle) 5/32"(thread)

DUBRO249 - Axle Shaft 3/16x2" (2) These are 3/16"x2" Axle Shafts. FEATURES Zinc plated spring steel construction INCLUDES Two axle shafts Two 5/16"nylon lock nuts REQUIREMENTS Minimal mechanical knowledge 1/2" wrench for the nuts 7/16" wrench for the axles SPECIFICATIONS Length: 2" (axle) .4" (thread) 2.6" (total length) Diameter: 3/16" (axle) 5/16"(thread)

DUBRO250MS - Dubro SPORT 63mm 2.50" 1par Lettvektshjul med felger i hvit plast Disse hjulene er det ikke mye "sprett" i og egner seg like godt på asfalt som grass. Felgene kan selvfølgelig males i ønsket farge   These open spoke wheels will add a sporty look to your model. They have been designed with electric models in mind.   Mål Diameter: 2.50" (64.5mm) Akselmål: .078" ( 2.00mm) Bredde : 19.8mm Vekt : 6.9g   Wheel Dia. = 2.500" (64.5mm) / Axle Dia. = .078" (2.0mm) / Weight = 6.9 grams/ea

DUBRO250SL - Dubro Super Lett Hjul 63mm 2.75" 1par Lettvektshjul med felger i grå plast Disse hjulene er det ikke mye "sprett" i og egner  seg like godt på asfalt som grass.       Felgene kan selvfølgelig males i ønsket farge   Mål Diameter: 2.50" (63.5mm) Akselmål: 5/32" ( 4.00mm) Bredde : 19.8mm Vekt : 11.5g   By far the lightest wheels we have ever produced! The Super Lite Wheel series feature a closed cell treaded foam wheel, with nylon hub. These wheels are ideal for electric, park flyers and lightweight gas models. These also have many more applications in school projects and various crafts. 250SL - 2.50" (63.5 mm) 5/32" (4 mm) 11.5grams/wheel 0.7813" (19.8 mm)

DUBRO250TL - Dubro Spor Lett Hjul 63mm 2.50" 1par Hjul med spor og felger i grå plast Disse hjulene er det ikke mye "sprett" i og egner  seg like godt på asfalt som grass. Felgene kan selvfølgelig males i ønsket farge   Mål Diameter: 2.50" (63.5mm) Akselmål: 5/32" ( 4.00mm) Bredde : 21mm Vekt : 29.4g 250TL - 2.50" (63.5 mm) 5/32" (4 mm) 29.4grams/wheel 0.820" (21 mm) DU-BRO® Treaded Lightweight wheels feature a foam interior yet have a tough and rugged exterior skin for durability. Excellent for paved runways! 1 pair/pkg. Features: Lightweight Shock absorbing Fuel resistant Built extremely tough These also have many more applications in school projects and various crafts.

DUBRO257 -  Nylon Hengsler HD Store (15) Store heavy duty type hengsler med messingsplint, Super nylonkvalitet . Mål: 19x35x1mm. Antall i pakken: 15 stk. 1.2mm uttakbar låsesplint   Built to take heavy loads, 3/4" (19 mm) Wide X 1-3/8" (35 mm) Long X .040" (1 mm) thick. Removable 3/64" (1.2 mm) diameter cotter pin for maximum convenience and strength. Ideal for big airplanes. 15/pkg. Weight: 1 gram/hinge

DUBRO275SL - Dubro Super Lett Hjul 69mm 2.75" 1par Lettvektshjul med felger i grå plast Disse hjulene er det ikke mye "sprett" i og egner  seg like godt på asfalt som gress.   Felgene kan selvfølgelig males i ønsket farge   Mål Diameter: 2.75" (69mm) Akselmål: 5/32" ( 4.00mm) Bredde : 23mm   By far the lightest wheels we have ever produced! The Super Lite Wheel series feature a closed cell treaded foam wheel, with nylon hub. These wheels are ideal for electric, park flyers and lightweight gas models. These also have many more applications in school projects and various crafts.

DUBRO275T - Dubro Hjul 70mm 2" 3/4" 1par Rimelige kvaliteshjul med eikefelger i grå plast Disse hjulene er det ikke mye "sprett" i og egner  seg like godt på asfalt som grass.   Felgene kan selvfølgelig males i ønsket farge   Mål Diameter: 2"3/4 (70mm) Akselmål: 5/32" ( 4.00mm)

DUBRO300SL - Dubro Super Lett Hjul 76.2mm 3" 1par Lettvektshjul med felger i grå plast Disse hjulene er det ikke mye "sprett" i og egner  seg like godt på asfalt som gress.   Felgene kan selvfølgelig males i ønsket farge   Mål Diameter: 3.00" (76.2mm) Akselmål: 5/32" ( 4.00mm) Bredde : 23mm   By far the lightest wheels we have ever produced! The Super Lite Wheel series feature a closed cell treaded foam wheel, with nylon hub. These wheels are ideal for electric, park flyers and lightweight gas models. These also have many more applications in school projects and various crafts.

DUBRO300T Low Bounce Treaded Wheels 3" (2) FEATURES Shock Absorbing Fits inside most Wheels Pants and Retracts Grey Eight Spoke Hub Design INCLUDES Two Wheels REQUIREMENTS Nothing SPECIFICATIONS     Diameter:     76mm   (3.00")           Hub Diameter: 4mm    (.15625")           Width:        26.0mm (1.030")

DUBRO302 -  Metall Link 4-40 gjenge (2)   Perfect for many scale applications, including strut attachments, flying wires, tailfin stab bracing, and bi-plane aileron connectors. Heavy duty steel and nickel plated. Includes screws and hex nuts. For use with .093 diameter (4-40) threaded rods. 2/pkg. Weight: 2.5 grams/assembly

DUBRO304 -  Metall Link 4-40 gjenge (2) Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 4-40 are for use with .093 dia rods, spring keepers are included. 1.5gr pr link

DUBRO334 - Kwik-fill Fueling Valve, Fylle Ventil Metanol Smart fylleventil som eliminerer å måtte koble fra slangen på forgasser for å fylle tanken på din modell. For metanol. The clean, safe way to fill your tank without disconnecting your fuel line from the carburetor. Perfect for models with enclosed engines. Easy to install. Comes complete with fueling probe. (Silver model is for GLO FUEL ONLY. Red Anodized Model is for GASOLINE ONLY). 1/pkg. Just in case you misplace yours, we offer a replacement fueling probe. This probe is specifically for DU-BRO¬Æ Kwik Fill Fueling Valve #334 & #335. 1/pkg. Recommended fuel tubing size is DU-BRO¬Æ Medium (3/32" ID) Silicone (Glo) or Tygon (Gasoline). View Instructions: click here Note: For rebuild kits, see item #718 (for #334), 719 (for #335). Weight: 7grams/valve Made in USA

DUBRO335 - Kwik-fill Fueling Valve, Fylle ventil Smart fylleventil som eliminerer å måtte koble fra slangen på forgasser for å fylle tanken på din modell. For bensin. Weight: 7 grams/valve The clean, safe way to fill your tank without disconnecting your fuel line from the carburetor. Perfect for models with enclosed engines. Easy to install. Comes complete with fueling probe. (Silver model is for GLO FUEL ONLY. Red Anodized Model is for GASOLINE ONLY). 1/pkg.   Just in case you misplace yours, we offer a replacement fueling probe. This probe is specifically for Du-Bro Kwik Fill Fueling Valve #334 & #335. 1/pkg. Recommended fuel tubing size is DU-BRO Medium (3/32" ID) Silicone (Glo) or Tygon (Gasoline). View Instructions: click here Note: For rebuild kits, see item #718 (for #334), 719 (for #335).

DUBRO3355 - Heavy Duty Clevis Horn System (8-32)(1set/pkg) Et komplett monteringssystem for store fly som kan konfigureres som en pull-pull eller som to enkelt kontrollhorn. Selvjusterende design vil monteres på 90º til midtlinjen på kontrollflaten. Dette systemet inkluderer toppbolter med sokkelhode som gir et sklisikkert hode når du installerer horn. Clevishornene inkluderer               4-40" Heavy Duty svingbare kuleledd for "no-slop" presisjonskontroll. Weight: #3355 - 39 grams/assembly

DUBRO336 - Gjenget 4-40 Stålende for Lodding/Liming på 0.93"(2.4mm) Stang (2) Machined out of steel for maximum strength. Thread length is 15.8 mm long with an overall length of 36.7 mm. Made to fit over a 2.3 mm linkage rod (soldered on). Nickel plated for easy soldering.

DUBRO3365 -  Heavy Duty Clevis (2) 4-40 Kulled (8-32) (2) For use with the #3355 & #3365 Heavy Duty Clevis Horn System or in your own set-up, the clevis horns include 4-40 heavy duty swivel ball links for “no-slop” precision control.   2/pkg #3365 (8-32) #3366 (10-32)

DUBRO3366 - Heavy Duty Clevis-(2) 4-40 Ball Link (2pcs/pkg) For use with the #3355 & #3365 Heavy Duty Clevis Horn System or in your own set-up, the clevis horns include 4-40 heavy duty swivel ball links for “no-slop” precision control.   2/pkg #3365 (8-32) #3366 (10-32)

DUBRO339 - Kwik-fill TankNippel (Reserve) (1) Reserve nippel for DUBRO335  

DUBRO350T Low Bounce Treaded Wheels 3-1/2" 89mm (2) FEATURES Shock Absorbing Fits inside most Wheels Pants and Retracts Grey Eight Spoke Hub Design INCLUDES Two Wheels REQUIREMENTS Nothing SPECIFICATIONS     Width: 32.0mm (1.25") Diameter: 89mm (3.50") Hub Diameter: 4mm (.15625")

DUBRO350TL Treaded Lightweight Wheels 89mm 3-1/2" (2) FEATURES Shock Absorbing Fits inside most Wheels Pants and Retracts Grey Eight Spoke Hub Design INCLUDES Two Wheels REQUIREMENTS Nothing SPECIFICATIONS     Width: 32.0mm (1.25") Diameter: 89mm (3.50") Hub Diameter: 4mm (.15625")

DUBRO380 - Skruer Selvgjengende Hex Head 2x3/8 (8) ca 2.2x7.8mm   These zinc plated socket head sheet metal screws are fully threaded and have more applications than wood screws. The non-slip socket head makes hard to get at places easy! Perfect for mounting servos, landing gear straps, motor mounts, etc. These also have unlimited uses in areas outside the hobby such as household, crafts, garage, vehicles, farm, agricultural, woodworking and many more. 

DUBRO400 - Tankinnsats Gummi for Bensin  Spesielt laget erstatningspropp for å konvertere en 2 oz til 50 oz DU-BRO® bensintank til bensin eller Glo-Fuel. Bensinproppen er brun og Glo-Fuel Stopper er svart. 1 / pkg

DUBRO400SLX Super Lite XL Wheel 100mm (4") (2)) 2 stk lettvekt (28.4gr  pr stk) skalahjul 101.6x30mm for 4mm aksling, kan enkelt borres opp til 7mm The Super Lite XL are the larger versions of the "SL" Super Lite wheels modelers have known for years. These tires are very durable and are mounted on a molded hub that captures the tire to avoid any roll off of the hub. The smooth tread and rounded edge provide a great ride for your aircraft and the material they are made from offers low bounce and super lightweight! These are great upgrades for some ARFs that offer less desirable wheels or for a scratch build that needs to save every ounce possible. All packages are (2) wheels per package. Diameter: 4.0" (101.6 mm) Axle Dia: 5/32" (4 mm) Weight: 28.4g (each) Width: 1.18" (30 mm)

DUBRO400TL Treaded Lightweight Wheel 102mm 4" (1) 1 stk lettvekt skalahjul 102x29mm for 5mm aksling, kan enkelt borres opp til 6mm This is the Dubro #400TL Treaded Lightweight 4" (102mm) Diameter Wheel.   FEATURES TL series foam interior yet has a tough and rugged exterior skin 8-spoked grey plastic wheel Shock absorbing 3/16" (5mm) axle diameter and can be drilled to 1/4" (6mm)   SPECIFICATIONS Tire diameter: 4"(102mm),Tire width: 1.15"(29mm)

DUBRO402 - Fuel Tank 2oz - 60cc DU-BRO ¬Æ Drivstofftanker er designet for å være tøffe! Drivstofftankene våre vil ikke dele seg eller sprekke av vibrasjoner eller trykk. Faktisk kan våre drivstofftanker brukes med trykksatte drivstoffsystemer! Leveres komplett med all maskinvare, inkludert vår klunk i ett stykke med drivstoffmothaker bygget rett på klunkstammen. Drivstoffslangen din vil ikke gli av! FEATURES: Du-Bro fuel tanks were designed with toughness in mind!           It will not split or crack from vibration or pressure.           Can be used with pressurized fuel systems!           Comes complete with all of the hardware including Du-Bro's one-piece             clunk with fuel barbs built right on the clunk stem, your fuel             tubing will not slide off!           Can be used with either Glo-Fuel or gasoline (must purchase DUBQ0675             Gasoline Conversion Stopper).           Filler cap fits over machined smooth neck of tank...prevents tank             from splitting and forms a positive leakproof seal.           Single or twin vent design for custom installation.           Soft brass tubes for easy bending.           Clunk fuel pick-up for even fuel flow.           Detailed assembly instructions with illustrations provided. INCLUDES: One 2oz Fuel Tank

DUBRO404 - Fuel Tank 4oz (120cc) FEATURES: Du-Bro fuel tanks were designed with toughness in mind!           It will not split or crack from vibration or pressure.           Can be used with pressurized fuel systems!           Comes complete with all of the hardware including Du-Bro's one-piece             clunk with fuel barbs built right on the clunk stem, your fuel             tubing will not slide off!           Can be used with either Glo-Fuel or gasoline (must purchase DUBRO675             Gasoline Conversion Stopper).           Filler cap fits over machined smooth neck of tank...prevents tank             from splitting and forms a positive leakproof seal.           Single or twin vent design for custom installation.           Soft brass tubes for easy bending.           Clunk fuel pick-up for even fuel flow.           Detailed assembly instructions with illustrations provided.

DUBRO406 - Fuel Tank 6oz (180cc) FEATURES: Du-Bro fuel tanks were designed with toughness in mind!           It will not split or crack from vibration or pressure.           Can be used with pressurized fuel systems!           Comes complete with all of the hardware including Du-Bro's one-piece             clunk with fuel barbs built right on the clunk stem, your fuel             tubing will not slide off!           Can be used with either Glo-Fuel or gasoline (must purchase DUBRO675             Gasoline Conversion Stopper).           Filler cap fits over machined smooth neck of tank...prevents tank             from splitting and forms a positive leakproof seal.           Single or twin vent design for custom installation.           Soft brass tubes for easy bending.           Clunk fuel pick-up for even fuel flow.           Detailed assembly instructions with illustrations provided.

DUBRO408 - Fuel Tank 8oz (240cc) FEATURES: Du-Bro fuel tanks were designed with toughness in mind!           It will not split or crack from vibration or pressure.           Can be used with pressurized fuel systems!           Comes complete with all of the hardware including Du-Bro's one-piece             clunk with fuel barbs built right on the clunk stem, your fuel             tubing will not slide off!           Can be used with either Glo-Fuel or gasoline (must purchase DUBRO675             Gasoline Conversion Stopper).           Filler cap fits over machined smooth neck of tank...prevents tank             from splitting and forms a positive leakproof seal.           Single or twin vent design for custom installation.           Soft brass tubes for easy bending.           Clunk fuel pick-up for even fuel flow.           Detailed assembly instructions with illustrations provided.

DUBRO416 - Fuel Tank 16oz (480cc) Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper. Note: #690-692 come with both tubing and fuel stopper for gas and glo fuel. # 795-797 are set up for gas only.  2 3/8" (60.33 mm) H 2 11/16" (68.26 mm) W 5 7/8" (149.23mm) L (77 grams)

DUBRO420 - Fuel Tank 20oz (600cc) Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper. Note: #690-692 come with both tubing and fuel stopper for gas and glo fuel. # 795-797 are set up for gas only.  20 oz 2 1/2" (63.5 mm) H 3 1/16" (77.79 mm) W 7" (177.8 mm) L (96 grams)

DUBRO424- Fuel Tank 24oz (710cc) Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper. Note: #690-692 come with both tubing and fuel stopper for gas and glo fuel. # 795-797 are set up for gas only.  20 oz 2 1/2" (63.5 mm) H 3 1/16" (77.79 mm) W 7.5" (190.5 mm) L (100 grams)

DUBRO450SLX Super Lite XL Wheel 113mm (4.5") (2) 2 stk lettvekt (42.5gr  pr stk) skalahjul 113x30mm for 4mm aksling, kan enkelt borres opp til 7mm The Super Lite XL are the larger versions of the "SL" Super Lite wheels modelers have known for years. These tires are very durable and are mounted on a molded hub that captures the tire to avoid any roll off of the hub. The smooth tread and rounded edge provide a great ride for your aircraft and the material they are made from offers low bounce and super lightweight! These are great upgrades for some ARFs that offer less desirable wheels or for a scratch build that needs to save every ounce possible. All packages are (2) wheels per package. Diameter: 4.5" (114.3 mm) Axle Dia: 5/32" (4 mm) Weight: 42.5g (each) Width: 1.18" (30 mm)

DUBRO490 - Kvikkfeste HD 4/40 for 0.093" (2.4mm) stang (2) Heavy Duty E/Z Connectors (#489 & 490) come complete with 2 each Steel Connector, 4-40 x 3/16 Socket Head Cap Screw, black snap washer, and push on steel washer. #489 works with .072 / 2-56 rod and #490works with .093" / 4-40 rod.

DUBRO500SLX Super Lite XL Wheel 125mm (5") (2) 2 stk lettvekt (51gr  pr stk) skalahjul 127x30mm for 4mm aksling, kan enkelt borres opp til 7mm The Super Lite XL are the larger versions of the "SL" Super Lite wheels modelers have known for years. These tires are very durable and are mounted on a molded hub that captures the tire to avoid any roll off of the hub. The smooth tread and rounded edge provide a great ride for your aircraft and the material they are made from offers low bounce and super lightweight! These are great upgrades for some ARFs that offer less desirable wheels or for a scratch build that needs to save every ounce possible. All packages are (2) wheels per package. Diameter: 5.0" (127mm) Axle Dia: 5/32" (4 mm) Weight: 51g (each) Width: 1.18" (30 mm)

DUBRO517 - Pull-Pull 2-56 linkage Pull-Pull system for overføring med vaier. Inneholder: ca 45m Nylonbelagt wire 4 kvikk linker med holder 4 muttere 4 riggekoblinger 4 klemhylser ca 10 cm krympestrømpe

DUBRO518 - Pull-Pull 4-40 linkage Pull-Pull system for overføring med vaier. Inneholder: ca 45m Nylonbelagt wire 4 kvikk linker med holder 4 muttere 4 riggekoblinger 4 klemhylser ca 10 cm krympestrømpe

DUBRO526 - Skruer Selvgjengende Button Head 2x1/2" (8) ca2.2x11.2mm   This design is by far the best way to mount servos, cowls, landing gear, etc. The wide/low profilehead of the screw acts as a washer and they also have a socket head for easy, no slip installation. Bright Zinc plated with clear chromate. These also have unlimited uses in areas outside the hobby such as household, crafts, garage, vehicles, farm, agricultural, woodworking and many more

DUBRO550SLX Super Lite XL Wheel 138mm (5.5") (2) 2 stk lettvekt (56.7gr  pr stk) skalahjul 138x30mm for 4mm aksling, kan enkelt borres opp til 7mm The Super Lite XL are the larger versions of the "SL" Super Lite wheels modelers have known for years. These tires are very durable and are mounted on a molded hub that captures the tire to avoid any roll off of the hub. The smooth tread and rounded edge provide a great ride for your aircraft and the material they are made from offers low bounce and super lightweight! These are great upgrades for some ARFs that offer less desirable wheels or for a scratch build that needs to save every ounce possible. All packages are (2) wheels per package. Size and information: *All wheel widths are 1.18" (30mm) and all axle dia. are 5/32" (4mm) that can be drilled out to 1/4" (7mm) if needed.

DUBRO584 - Islagsmutter 10-32 (4) DU-BROs permanentmonterte islagsmuttere er tilgjengelige i 6 størrelser. Brukes til montering av motorer, landingsutstyr, deksler, luker osv. Den perfekte monteringsmutteren for vanskelig tilgjengelige områder. Sink belagt.

DUBRO600RV Luftfyllte Ballonghjul 15cm (6") 2 stk Smooth inflatable tires with positive seal air valves. Features two piece bolt together hubs and hub caps. Wheels can be inflated (or deflated) thru a tiny valve in the side of the tire. Axle diameter size 5/32 (4 mm).  Ideal as "tundra" tires to give an authentic look.  2/pkg.   Two Wheels Two Wheel Covers Two 5/32" Collars Two Wheel Cover Screws  One Air Valve SPECIFICATIONS Diameter: 152.4 mm (6.0") Width: 63.50 mm (2.50") Vekt : ca 340gram STK Akseldiameter : 5/32 (ca 4mm) Kan enkelt borres opp til tykkere akslinger.

DUBRO611 - Kwik-fill Large Scale Fueling Valve, Fylle Ventil Bensin DU-BRO has taken innovation to its finest and produced a large scale fueling valve featuring a press on dust cover to keep dirt and oil from getting into the valve. Designed to work with 1/8" and 5/32" tubing. The DU-BRO Large Scale Fueling Valve allows a higher volume of fuel to enter the carburetor and fill your fuel tank faster. Comes complete with fueling probe. (Silver model is for GLO FUEL ONLY. Red Anodized Model is for GASOLINE ONLY). Just in case you misplace yours, we offer a replacement fueling probe. This probe is specifically for DU-BRO¬Æ Large ScaleFueling Valve #610 & #611. 1/pkg. Recommended fuel tubing size is DU-BRO¬Æ Large(1/8" ID) or X-Large (5/32" ID) Silicone (Glo) or Tygon (Gasoline). Note: For rebuild kits, see item #720(for #610), 721(for #611). Weight: 21 grams/valve Made in USA

DUBRO690 - Fuel Tank 32oz (950cc) Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper. Note: #690-692 come with both tubing and fuel stopper for gas and glo fuel. # 795-797 are set up for gas only.  32 oz 3" (76.2 mm) H 3 11/16" (93.66 mm) W 7 3/4" (196.85 mm) L (160 grams)

DUBRO694 - Støtstang med gjenge 2x762mm (1) Kan brukes sammen med nylon Kwik-linker eller med ball linker der ekstra lange støtstenger er nødvendig. Bøyelig og sterk. Stangen har 19mm 2mm gjenge i den ene enden.

DUBRO700 - Rørføring for Støtstang 2.9x4.8x750mm (1) Spesifikasjon: Lengde : 750mm Ø-Dia : 4.8mm Innv-Dia : 2.9mm  

DUBRO716 Super Strength T-Style Control Horns (2)   Stronger than conventional nylon control horns, these aerodynamically designed Super Strong control horns come complete with back plate and 2-56 x 1/2 socket head cap screws for easy installation. 1 3/4 long with 5 adjustment positions.

DUBRO789 Super Strength Landing Gear .35-.61  This is DU-BRO Landing Gear.  Works for Airplanes, .35-.61 size. FEATURES: One-piece design           Injection molded out of state-of-the-art material.           Absorbs even the roughest landings.           Ideal for replacement on ARF planes.           Landing gear can be painted.           Easy to install INCLUDES: One Piece Landing Gear. REQUIRES: Mounting hardware SPECS:    Base: 3-5/8"           Landing Length: 4 1/2"           Width: 14" COMMENTS: The axle holes are not pre-drilled.

DUBRO796 - Fuel Tank 80oz (2400cc) DU-BRO Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including our one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! DU-BRO¬Æ Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper. Note: #690-692 come with both tubing and fuel stopper for gas and glo fuel. # 795-797 are set up for gas only. Made in USA   80oz @6 P.S.I. 3 5/8" (92.075 mm) H 4.705" (119.51 mm) H 4.812" (122.2 mm) W 5.27" (133.86 mm) W 10.5" (266.7 mm) L 10.755" (273 mm) L (225grams)

DUBRO802 - Gjenget støtstang 305mm 4-40 (6) Gjenget i en ende Can be used in conjunction with our nylon or steel Kwik-Links or with ball links where extra long pushrods are needed. Bendable and strong. Rods are 093" rods w/4-40 thread.   

Fyll tanken direkte fra Byron eller andre typer fuelkanner. Bor hull i korken og monter utstyret. Det følger med fuelslange, klunkfilter og "lukkenippel" som hindrer lekkasje.

DUBRO811 - Nylon Landing Gear Straps 3/16" (4) This is a set of four nylon landing gear straps                     They are made by DuBro. FEATURES: Four White nylon straps and 8 screws INCLUDES: Four White nylon straps, 8 wood screws (1" long) REQUIRES: Small phillips screwdriver, landing gear wires of 3/16" diameter SPECS:    Length:3/4"           Width: 5/16"           Distance between screw holes on strap: 1/2"           Diameter of gear wire channel: 3/16"

DUBRO815 - Safety Lock Kwik Link 2-56 (2) These are 2-56 Safety Lock Kwik-Link Clevis' from Dubro. Used on model aircraft for connecting control rods to control surfaces.     FEATURES Self tapping design leaves no slop on the pushrod threads. Square nylon shank for easy installation and adjustment. 10% lighter than a steel clevis. Brass plated stepped steel pin does not bind on control horns and has a large flat head for easy removal. Brass plated steel safety lock slides into a groove on the pin for a secure and solid lock. Safety lock is mounted in a track system on the clevis body to help prevent it from being lost.   INCLUDES Two 2-56 Safety Lock Kwik-Link Clevis'   REQUIREMENTS 2-56 Pushrods of modeler's choice Installing clevis' onto pushrods   SPECIFICATIONS Length: 1-1/8" Width: 5/16"Shank Width: 3/16"

DUBRO817 - Safety Lock Kwik Link 4-40 (2) These are 4-40 Safety Lock Kwik-Link Clevis' from Dubro. Used on model aircraft for connecting control rods to control surfaces.     FEATURES Self tapping design leaves no slop on the pushrod threads. Square nylon shank for easy installation and adjustment. 10% lighter than a steel clevis. Brass plated stepped steel pin does not bind on control horns and has a large flat head for easy removal. Brass plated steel safety lock slides into a groove on the pin for a secure and solid lock. Safety lock is mounted in a track system on the clevis body to help prevent it from being lost.   INCLUDES Two 4-40 Safety Lock Kwik-Link Clevis'   REQUIREMENTS 4-40 Pushrods of modeler's choice Installing clevis' onto pushrods   SPECIFICATIONS Length: 1-1/8" Width: 5/16"  Shank Width: 3/16"

DUBRO825 - Dubro Ski hoved opptil .60 str. 2stk Du-Bro Snowbird ski    Med Snowbird ski fra Dubro kan du fly hele vinteren. Monteres på modellens eksisterende understell. Skiene er laget i polyplast og har styrekanter. Skiene holdes i posisjon og har fjærer.  Passer for fly opp til .60 størrelse.  fra ca 90cm til 180cm Alt festeutstyr er med.    Vekt: 127g pr.par  Dim: 65x240mm fra tupp til ende.

DUBRO830 - Ski for parkflyvere 1par DUBROB830 Ski for parkflyvere 1par, skiparet veier 26 gram. 18 cm lange. Park Flyer snøskiene er vakuumformet ABS-materiale med to styringer på hver ski for utmerket sporing og styring. Skiene inkluderer også et fjærsystem for å tillate flex ved start og landinger, men forblir i en positiv posisjon mens de flyr. Det beste av alt er at DU-BRO® Park Flyer Snow Ski monteres på flyet ditt på få minutter. 2 Park Flyer Skis/pkg Weight: 13grams / (1) ski and mounting hardware Made in USA

DUBRO845 -  Mini E/Z Connectors (2) SPECIFICATIONS Length: 4.8mm (3/16") Diameter: 3.2mm (1/8") Weight: 0.25g (0.0088oz)

DUBRO846 - Dubro Pull-pull system Micro  Used on Indoor and Park Flyers. Features: Less problems with binding.           Lighter weight           Reduces slop in the controls. Includes: 15ft steel cable (nylon coated)           4- Kwik Links with keepers           4- cotter pins           7- heat shrink tubes           4- round head screws           Instructions

DUBRO847 - Push rod system micro 50cm 2stk Micro pushrod system kommer komplett med støtstenger, nylonrør. mini ez kvikkfester og micro ez linker i plast.   Støtstang: 0,8 mm. Lengde: 50 cm. Antall i pakken: 2 Sett

DUBRO852 -  Micro Pushrod Rod Set This is the Dubro Micro Pushrod Rod Set for Park Flyers.     FEATURES All Required Hardware .030" diameter (0.76mm) Rods with outer tubes   INCLUDES Two Long 30" Rods With Pre-bent End Two Outer Tubes Two Micro E/Z Connectors Two Nylon E/Z Connector Ends Two E/Z Connector Screws Two Micro E/Z Link   REQUIREMENTS Micro Park Flyer   SPECIFICATIONS Rod 1 Tube Length: 762mm (30") 723.9mm (28.5") Width: 7.4mm (0.291")Diameter: 0.76mm (.030")

DUBRO855 - E/Z link Snap on for 1.8mm tråd (2-56") (4) Snap fit on to wire, simply bend 90 degree angle on pushrod and install theE/Z Link on to pushrod (no Z Bend required). Super lightweight design. 4/pkg. #855 - 0.25gram/ea NOTE: .072 (2-56) are only available in "NATURAL" color.

DUBRO885 - E/Z link Snap on for 2.3mm tråd (4-40") (4) Snap fit on to wire, simply bend 90 degree angle on pushrod and install theE/Z Link on to pushrod (no Z Bend required). Super lightweight design. 4/pkg. #885 - 0.50gram/ea NOTE: .072 (2-56) and.093 (4-40) are only available in "black" color. ill.foto varen er sort

DUBRO893 - Socket Head Servo Skrue Sett (2x11mm, 2x7/16") (24) 24 stk skruer med tønnehode og fast skive ca 2x11mm

DUBRO899 - KuleLink 4-40 med Skrue/Mutter/StandOff (2) 2 stk kulelinker for 4-40 støtstang/gjenger Du-Bro Heavy Duty Ball Links 4-40 (2) Smooth friction-free operation provides solutions to many applications. These high quality heavy duty ball links feature burnished, nickel plated brass balls for smooth operation. Complete with socket head cap screw, brass shim and nylon insert lock nut. INCLUDES: 2x Heavy-Duty ball links w/brass swivel-balls 2x beveled brass swivel-ball stand-offs 2x 4-40 x 5/8" hex-head mounting screws 2x #4 lock nuts (metal construction w/nylon insert) REQUIREMENTS: 3/32" allen wrench 1/4" open-end wrench or nutdriver SPECIFICATIONS: Ball Link Length: 27mm Standoff Height: 3.2mm

DUBRO900 - KuleLink 4-40 med Skrue/Mutter/StandOff (12) 12 stk kulelinker for 4-40 støtstang/gjenger Du-Bro Heavy Duty Ball Links 4-40 (12) Smooth friction-free operation provides solutions to many applications. These high quality heavy duty ball links feature burnished, nickel plated brass balls for smooth operation. Complete with socket head cap screw, brass shim and nylon insert lock nut. INCLUDES: 12x Heavy-Duty ball links w/brass swivel-balls 12x beveled brass swivel-ball stand-offs 12x 4-40 x 5/8" hex-head mounting screws 12x #4 lock nuts (metal construction w/nylon insert) REQUIREMENTS: 3/32" allen wrench 1/4" open-end wrench or nutdriver SPECIFICATIONS: Ball Link Length: 27mm Standoff Height: 3.2mm

DUBRO902 - Dual Swivel Ball Link 4-40 (2) This is the Dual Swivel Ball Link 4-40 by Dubro. FEATURES Plastic links for 4-40 sized rods INCLUDES Two Dual Ball Link 4-40 Swivels Two brass tapered collars Two 3x15mm cap head screws Two 3mm nuts SPECIFICATIONS Length: 1.7" (43mm) Width: 0.39" (10mm)

DUBRO916 - Hengseltape 4.5x25.4mm til Rorhengsler SPECIFICATIONS Length: 4.5m Width: 25.4mm

DUBRO919 - Micro2 Control horn 2stk SPECIFICATIONS     Length:  17mm     Height:  12.7mm

DUBRO937 Mikro E/Z Stolpehengsel 33mm (15) Pinnehengsel for Indoor og små parkflyere. Nå kan du hengsle rorene dine med disse populære hengslene i pinnestil. Disse er designet for mikro innendørs og parkflyer-modeller, og bruker pivotpinner i metall og flere koblingsarmer for styrke. Lengde : 32mm Ø : 2.6mm  

DUBRO940 - Mini E/Z link for 1,6mm tråd (4) Snap fit on to wire, simply bend 90 degree angle on pushrod and install theE/Z Link on to pushrod (no Z Bend required). Super lightweight design. 4/pkg. #940 - 0.06gram/ea NOTE: .072 (2-56) and.093 (4-40) are only available in "NATURAL" color.

DUBRO943 - Micro Profile Landing Gear  Weight including hardware: 34.0 grams (less after trimmed) STRONG, LIGHTWEIGHT, & VERSITILE! This landing gear for profile mounting is the answer for your "foamie", "ARF's" and your original designs. Simple and strong mounting with all hardware included. This is THE landing gear for all profiles up to 5/8" wide.

DUBRO944 - Hjulstopper Mikro 1.5mm (4) Mikrohjulstoppere for små understell/fly aksling 1.5mm Lighten up with our Micro Wheel Collars. Designed for electric flyers with .047" (11.938 mm) to .062" (15.748 mm) axles and use set screws for a secure fit. These Micro Wheel Collars are 50% LIGHTER than standard 1/16" brass wheel collars. Each collar weighs 0.42 grams. Each pack includes (4) collars with set screws and a .050" allen wrench.

EFL-1120 - Main Landing Gear Set: Draco 800mm Understell med hjul og innfestninger for Mikro draco

EFL-2949 - Landing Gear Assembly : Micro Scrappy  

EFL-2951 - Main Wheels 58mm : Micro Scrappy Hjulsett for Micro Scrappy 800

EFL08253 - Nose Gear Steering Arm: T-28 Trojan 1.1m

EFL1045010 - Wing Strut Set with Hardware: Carbon-Z Cub