Deler Traxxas TRX-4M

9776 - Drevsats High Range 16.6:1 Reduksjon, 11T Pinion TRX-4M Gear set, transmission, high range (trail) (16.6:1 reduction ratio)/ pinion gear, 11-tooth Designed for all-around action, the high-range gear set is a direct replacement for stock TRX-4M™ transmission gears. The package includes a full set of transmission gears and an 11-tooth pinion gear with a total 16.6:1 reduction ratio. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9776A - Drevsats Speed 6.8:1 Reduksjon, 11T Pinion TRX-4M Traxxas 9776A - Gear set, transmission (red) (6.8:1 reduction ratio) (for use only with portal drive axles) Boost the top end of your TRX-4M™ with this Speed gear set. The gear set features a high 6.8:1 reduction ratio for use with portal drive axles. The set includes all transmission gears and a new 11-tooth motor pinion.   

9776R - Drevsats Low Range 40.3:1 Reduksjon, 11T Pinion TRX-4M Gear set, transmission, low range (crawl) (40.3:1 reduction ratio)/ pinion gear, 11-tooth Give your TRX-4M™ unstoppable torque with this low-range transmission gear set. The gear set features an ultra-low 40.3:1 reduction ratio for maximum rock-climbing power. The set includes all transmission gears and a new 11-tooth motor pinion. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9776X - Drevsats Speed 9.7:1 Reduksjon, 11T Pinion TRX-4M Gear set, transmission, speed (9.7:1 reduction ratio)/ pinion gear, 11-tooth Boost the top end of your TRX-4M™ with this Speed gear set. The gear set features a high 9.7:1 reduction ratio for maximum speed. The set includes all transmission gears and a new 11-tooth motor pinion. Not recommended for snow, mud, rock crawling, or other high-resistance surfaces. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9777 - Drevsats Differensial TRX-4M Ring gear, axle (2)/ pinion gear, axle (2) Replacement ring and pinion gears from the front and rear axles Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9779 - Drivlinje i Metall TRX-4M Foran/Bak Differensial og pinion i metall TRX-4M Give your TRX-4M™ the ultimate drivetrain upgrade with these front and rear metal axle gears. Metal axle gears are the perfect companion for the 9756 hardened-steel axle set. Accessory part for these models: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9780 - Hjul Vekter Messing 2x31gram (2) Each brass wheel weight adds 31 grams to the lowest part of your TRX-4M™ for improved anti-rollover stability and superior rock-climbing capability. Brass wheel weights replace the standard beadlock barrels and must be used with 9781 beadlock wheels. Sold as a pair. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9781 - Felgsett Method Race 105 Bead Lock 1.0" (2) Functional Method Race Wheels® 105 beadlock wheels look great on your TRX-4M™ and provide maximum grip on the tire bead. Beadlock wheels work with standard TRX-4M tires and the optional 9782 Mickey Thompson® Baja Pro X® off-road tires. Add the optional 9780 brass wheel weights to give your TRX-4M even more stability for tough technical maneuvers. Includes inner and outer rims (2), center barrels (2), and mounting screws (12). Fits 7mm Hex.

9782 - Dekksett Mickey Thompson Baja Pro X 2.2x1.0" (2) Aggressive side lugs and deep channels give these 1/18 scale 2.2" Mickey Thompson® Baja Pro X® tires nearly unstoppable traction on any surface. The soft-compound rubber grips onto rock surfaces to carry your TRX-4M™ up and over obstacles. Mount them on your stock 1.0" TRX-4M wheels or optional 9781 beadlock wheels. Sold as a pair. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9783 - Pro Scale LED Light Set Bronco TRX-4M TRX-4M® Bronco Pro Scale™ Light Set Add scale lighting to your 1/18 scale TRX-4M Bronco for an extra layer of fun and good looks. The Pro Scale Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction.   ­ Pro Scale® Light Set Features ­ Fully waterproof Single wiring harness connection to ECM-2.5™ for simple installation 5 Lighting Modes; selectable using the EZ-Set® Button Headlights Marker/Daytime Running Lights Lights Off (Brake and Reverse Lights only) Hazard Lights Demo Mode* (plays a cycle of lighting functions) Headlights Daytime running lights Functional brake lights Functional reverse lights Hazard lights Kit Includes: LED lighting kit harness *For display only; TRX-4M will not drive in this mode ­   Easy to Install! Pro Scale lighting functionality is already built into the ECM-2.5 so there's no need to install extra modules. Just plug the wiring harness into one the light channels on the ECM and you're ready for fun. You can even use the standard bumper lights in addition to Pro Scale lighting for an extra boost of power. A new point-to-point LED wiring bus makes installation as simple and clean as possible with a single length of wire running the entire system. Ford Motor Company Trademarks and Trade Dress used under license to Traxxas.

9784 - Pro Scale LED Light Set Defender TRX-4M TRX-4M® Defender Pro Scale™ Light Set Add scale lighting to your 1/18 scale TRX-4M Defender for an extra layer of fun and good looks. The Pro Scale Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction.   ­ Pro Scale® Light Set Features ­ Fully waterproof Single wiring harness connection to ECM-2.5™ for simple installation 5 Lighting Modes; selectable using the EZ-Set® Button Headlights Marker/Daytime Running Lights Lights Off (Brake and Reverse Lights only) Hazard Lights Demo Mode* (plays a cycle of lighting functions) Headlights Daytime running lights Functional brake lights Functional reverse lights Hazard lights Kit Includes: LED lighting kit harness *For display only; TRX-4M will not drive in this mode ­ ­   Easy to Install! Pro Scale lighting functionality is already built into the ECM-2.5 so there's no need to install extra modules. Just plug the wiring harness into one the light channels on the ECM and you're ready for fun. You can even use the standard bumper lights in addition to Pro Scale lighting for an extra boost of power. A new point-to-point LED wiring bus makes installation as simple and clean as possible with a single length of wire running the entire system. Land Rover and the Land Rover Logo are trademarks owned and licensed by Jaguar Land Rover Limited.  

9786 - Kabel med Led Lys Front TRX-4M Wire harness, LED lights (front)/ zip ties (2) Replacement front LED light harness includes zip ties (2)  

9787 - Differensiallokk Messing 8gram Hver 1/18 TRX-4M  Differensial lokk i messing for TRX-4M bilene  Front and rear brass axle covers add 8 grams of weight (each) to the lowest part of your TRX-4M for improved anti-rollover stability and superior rock-climbing capability. Includes 1.6x12 mm screws (8). Tilbehørsdel for disse modellene: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 18/1 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9789 - Lysbar sett for TRX-4M Bronco-Defender Lys opp veien til ditt neste eventyr med TRX-4M™ LED Light Bar-settet. Settet legger til ultrahvitt foroverbelysning med ekstra lysbjelker på takstativet og frontstøtfangeren. Lysbarene er fullt kompatible med standard TRX-4M støtfangerlys og Pro Scale® Light Set. Settet er enkelt å installere med inkluderte fester for både Bronco- og Defender®-karosserier med allt monteringsutstyr. Alt er helt vanntett for bekymringsfri kjøring i alle miljøer. Ta din TRX-4M til neste nivå med dette ultimate belysningstilbehøret. TRX-4M Accessory Light Bars Features   Ultra-bright LED roof and bumper bars for maximum forward lighting Fully waterproof Fits TRX-4M Bronco and Defender bodies Simple installation with all mounting hardware included

9790 - Lyssett Tilhenger Komplett med Lamper-Kabling TRX-4M tilhengerlyssett komplett med allt som trengs for å få lys på TRX4-M hengeren. Tilhengerlyssettet legger til fungerende bremse- og reverslys til TRX-4M™ tilhengeren. Gi tilhengeren din en ekstra dose skalarealisme med dette altomfattende settet. Lyssettet er fullt kompatibelt med TRX-4Ms standard støtfangerlys og Pro Scale® Light Set. Tilhengerlys er enkle å installere med den medfølgende monteringsutstyret og replikaverktøykassen. Alt er helt vanntett for bekymringsfri kjøring i alle miljøer. TRX-4M Trailer Light Kit Features   Working brake and reverse lights Fully waterproof Compatible with existing TRX-4M light kits Simple installation with all mounting hardware included

9791 - Transmission (High Range (Trail) 16.6:1 Komplett Komplett girkasse for TRX-4M  Transmission, complete (high range (trail) gearing) (16.6:1 reduction ratio) (includes Titan® 87T motor) The Pro Built® high range (standard) transmission comes professionally assembled with bearings and a fresh new Titan® 180 87-turn motor. There’s no gear mesh to adjust or parts to align. The assembly bolts in as a complete unit for quick and easy installation. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9791R - Transmission (Low Range (Crawl) Komplett Komplett girkasse for TRX-4M  Transmission, complete (low range (crawl) gearing) (40.3:1 reduction ratio) (includes Titan® 87T motor) Give your TRX-4M™ unstoppable torque with this low-range transmission. The transmission features an ultra-low 40.3:1 reduction ratio for maximum rock-climbing power. Traxxas Pro Built® transmissions come professionally assembled with a fresh new Titan® 180 87-turn motor. There’s no gear mesh to adjust or parts to align. The assembly bolts in as a complete unit for quick and easy installation. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9791X - Transmission (Speed Gearing) Komplett Komplett girkasse for TRX-4M  Transmission, complete (speed gearing) (9.7:1 reduction ratio) (includes Titan® 87T motor) Boost the top end of your TRX-4M™ with this Speed transmission. The transmission features a high 9.7:1 reduction ratio for maximum speed. Traxxas Pro Built® transmissions come professionally assembled with bearings and a fresh new Titan® 180 87-turn motor. There’s no gear mesh to adjust or parts to align. The assembly bolts in as a complete unit for quick and easy installation. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9793- Kjølekappe Motor Titan 180 i 6061-T6 Aluminium Heat sink, Titan® 87T motor (6061-T6 aluminum) Reduce your motor temperatures with anodized style using the 6061-T6 aluminum heat sink for the Titan® 180 motor Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9794 - Display Stand 155mm Hjulbase Put your TRX-4M™ on full display with this custom stand. The rigid foam stand holds your truck securely and prevents flat-spotted tires. Fits 155 mm wheelbase. Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9795 - Tilhenger komplett for TRX-4M Utility trailer/ trailer hitch (assembled)/ 3mm spring pre-load spacers (2)/ 2.5x8mm BCS (2) The TRX-4M™ 1/18 scale utility trailer stows all your scale gear and attaches securely to your truck with the included hitch. Challenge your trailering skills by backing the utility trailer into position using your TRX-4M. Trailer comes fully assembled and ready use. Includes hitch, rear pre-load shock spacers (2) and 2.5 x8 mm screws (2) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9795_Karmer - 3D Print Karmer for 9795 TRX-4M Karmer i PLA+ laget for å passe TRX-4M Henger 9795, karmene passer fint i festene på hengeren. 1 forkarm, 1 bak karm, 2 sidekarmer Henger følger ikke med.

9796 - Tilhengerfeste TRX-4M Trailer hitch (assembled)/ trailer coupler/ 3mm spring pre-load spacers (2)/ 2.5x8mm BCS (2)/ 1.6x10mm BCS (self-tapping) (1) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

9811 - Karosseri TRX-4M Chevrolet K10 Ulakkert (1) Body, Chevrolet K10 Truck (1979), komplett (umontert) (hvit, krever lakk) (inkluderer grill, sidespeil, dørhåndtak, veltebøyle, vindusviskere, og klippsløs montering) (krever # 9835 foran og bak støtfangere) Gi din TRX-4M™ High Trail™ Edition et tilpasset utseende med dette hvite(ulakkerte) Chevrolet® K10 karosseriet, da kan du velge du farge og design og Tamiya TS lakk gjør det enkelt å få profesjonelle kvalitetsresultater. Karosseriet leveres umontert for maling, men inkluderer karosseritilbehør og monteringsutstyr. Krever High Trail utvidet akselavstandschassis og 9835 støtfangere foran og bak. Passer ikke standard TRX-4M.)   Tilbehør del for disse modellene: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™

9811-BLK-BLUE-RED - Karosseri TRX-4M Chevrolet K10 Lakkert (1) Karosseri, Chevrolet K10 Truck (1979), komplett, lakkert,(inkluderer grille, sidespeil, dørhåndtak, veltebøyle, vindusviskere, og klippsløs montering) (krever # 9835 foran og bak støtfangere) TRX-4M™ High Trail Edition klipsløse karosserier leveres klare til montering på High Trail-Crawleren™ rett ut av esken. Chevrolet K10-karosseriet er konstruert av robust ABS-plast og fanger alle detaljene i bilen® i full størrelse i stor skala 1/18. Den medfølgende grillen, sidespeilene, dørhåndtakene, veltebøylen, vindusviskerne og klippsløse fester gir din High Trail et virkelig autentisk utseende. Bare fest en på ditt TRX-4M High Trail-chassis, så er du klar for moro og eventyr! Krever High Trail med forlengett akselavstandschassis og 9835 støtfangere foran og bak. Passer ikke standard TRX-4M.   Tilbehør del for disse modellene: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™

9816 - Dørhåndtak-Speil-Vindusviskere TRX4-M F-150-K10 Replacement chrome door handles, wipers, and side mirrors for 9812-series TRX-4M™ F-150® bodies Replacement part for these models: TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ Accessory part for these models: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™

9817 - Dørhåndtak-Speil-Vindusviskere TRX4-M K10-F-150 Replacement chrome door handles, wipers, and side mirrors for 9811-series TRX-4M™ K10 bodies Replacement part for these models: TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ Accessory part for these models: TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™

9835 - Støtfangere Foran (1) Bak (1) TRX-4M K10 Bumper, front (1)/ rear (1) (fits TRX-4M™ Chevrolet® K10® Truck) Replacement front and rear bumpers for 9811-series TRX-4M™ K10 bodies Replacement part for these models: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™

9893 - Kabling til Tilhenger Lys-sett Wire harness and mount for 9790 trailer LED light kit. Accessory part for these models: TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9843R - Portal Kit Foran/Bak for TRX-4M 2.56:1 Reduksjon Et nytt nivå av terrengkapasitet Akkurat som den større TRX-4®, øker nye TRX-4M™ portalaksler terrengkapasiteten ved å heve kjøretøyet ved akslene. Bakkeklaringen i midten øker med over 10 mm, og sporet utvides med 9 mm for et helt nytt nivå av 1/18-skala krabbekapasitet. Settet inkluderer helmetall portalgir med selvsmørende foringer for langvarig ytelse. Akslene leveres fullstendig montert og klare til montering med oppdaterte girkasser for å opprettholde standard hastighet og dreiemoment. Portalaksler er også kompatible med de fleste TRX-4M-tilbehør og fungerer utmerket med den valgfrie 9891 2-trinns girkassen. FUNKSJONER PÅ PORTALAKSELSETT: Inkluderer komplette for- og bakaksler med portalmonteringer 10,5 mm høyere midt bakkeklaring 9 mm bredere spor Helmetall portalgir Inkluderer to girsett: RED: optimalisert for entrinns girkasser BLÅ: optimalisert for 2-trinns girkasser Beholder standard fremoverroterende motor For standard entrinns girkasse – Bruk de medfølgende røde girene sammen med entrinns girkassen til generell bruk, eller behold standardgiret for kryping. Portalaksler er ikke kompatible med 9776R lavgir. For valgfri 2-trinns høy/lav girkasse – Bruk de medfølgende blå girene for å opprettholde standard bilhastighet i høyt gir og krypehastighet i lavgir. Gå opp til enda større terrengkapasitet : For å øke din TRX-4Ms ytelse ytterligere, legg til den valgfrie totrinns girkassen for å opprettholde standardhastigheten i høyt gir, og gi et ultralavt krypgir for maksimal moment. Standard TRX-4M-lastebiler kan også oppgraderes til de høyere 2,4" Mickey Thompson® Baja Pro XS-dekkene® som finnes på High Trail-utgaven™, for enda høyere bakkeklaring og en mer aggressiv holdning.

9845X - Kulelagersett for Portal Akslinger TRX-4M Kulelager for yttre portal 9843R TRX-4M Består av : 2 stk 8x12x3.5mm lager 2 stk 6x10x3mm lager 8 stk 4x7x2.5mm lager 4 stk 3x6x2.5mm lager

9852 - Akselhylser Mellomaksel i T6061 Aluminium Mellomakselhylser for bruk sammen med 9751 stål aksling på High Trail 4M-bilene, passer ikke standard Traxxas 4M Fronthylse er for kort så den må spaces på akslingene med spacere som medfølger.   Accessory part for these models: TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™

9855 - Mellomakslinger Lange Center Foran/Bak High Lift Driveshafts, center, assembled (front & rear) (fits 1/18 scale TRX-4M™ vehicles with 161mm wheelbase)  

9859 - Ball Ends Sett for Lenkearmer i Stål (High Trail) Ball ends for bruk på TRX4-M High Trail bilene med lenkearmer 9749 i stål Sett med åtte ballends med stålkuler aom brukes til å forlenge 9749-serien TRX-4M® stål- eller aluminiumsopphengslenkene for å passe til High Trail-modeller™. Accessory part for these models: TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®  

9863 - Lyssett For Veltebøyle 9862 (High Trail) Ledlyssett med ledningsnett for TRX4-M Veltebøyle High Trail. Add more scale detail to your TRX-4M by replacing the replica lights in the 9862 roll bar with these bright LED lights. Includes wiring harness.®    

9868 - Dekk BFGoodrich T/A KM3 2.4x1.0" (2) 1 par dekk som er designet for TRX-4M High Trail Edition-Crawlere, BFGoodrich T/A KM3 2,4x1,0″- dekkene er høyere enn standard TRX-4M-dekk for mer bakkeklaring og en aggressiv holdning. Dekkene passer til standard 1" TRX-4M-felger og 1" beadlock - felger. For ekstra kontroll på stien, prøv 9874 fast eller 9875 mykt skuminnlegg.  Long Arm Lift Kit anbefales for å forhindre gnissing. Utvendig 2.4" (61mm), Bredde 0.94" (24mm), Felgmål 1.0" (25.4mm)   Erstatningsdel for disse modellene: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 18/1 1979 Ford® F-150® High Trail Edition™

9871 - Dekk Mickey Thompson® Baja Pro™ Xs 2.4x1.0" (2) 1 par dekk som sitter standard på TRX-4M High Trail Edition-Crawlere, Mickey Thompson Baja Pro XS 2,4x1,0″- dekkene er høyere enn standard TRX-4M-dekk for mer bakkeklaring og en aggressiv holdning. Dekkene passer til standard 1" TRX-4M-felger og 1" beadlock - felger. For ekstra kontroll på stien, prøv 9874 fast eller 9875 mykt skuminnlegg.  Long Arm Lift Kit anbefales for å forhindre gnissing. Utvendig 2.4" (61mm), Bredde 0.94" (24mm), Felgmål 1.0" (25.4mm)   Erstatningsdel for disse modellene: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 18/1 1979 Ford® F-150® High Trail Edition™

9874 - Dekkinnlegg Skumgummi (Hard)1.0" (2) 2 stk 1,0" harde dekkinnlegg som lar deg endre klatre og kjøreegenskapene til en TRX-4M - innlegg for og ta hensyn til forskjellige kjøretøyvekter. Selges som et par. Myke skuminnsatser 9875 også tilgjengelig. Erstatningsdel for disse modellene: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 18/1 1979 Ford® F-150® High Trail Edition™

9875 - Dekkinnlegg Skumgummi (Soft)1.0" (2) 2 stk 1,0" myke dekkinnlegg som lar deg endre klatre og kjøreegenskapene til en TRX-4M - innlegg for og ta hensyn til forskjellige kjøretøyvekter. Selges som et par. Harde skuminnsatser 9874 også tilgjengelig. Erstatningsdel for disse modellene: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 18/1 1979 Ford® F-150® High Trail Edition™

9881 - Felgsett 1.0" (4) 6061-T6 aluminum (anodized) (4)/ 2x8mm BCS (24) Ta din TRX-4M™ til neste nivå med disse anodiserte felgene i aluminium. Disse funksjonelle 1" aluminiumsfelgene er laget av robust 6061-T6 aluminium, og ser bra ut på din TRX-4M og gir maksimalt grep på bead i dekket. Beadlock-felgene fungerer med standard TRX-4M-dekk og valgfrie 9782 Mickey Thompson® Baja Pro X® terrengdekk. Legg til de valgfrie 9780 messingvektene for å gi TRX-4M enda mer stabilitet for tøffe tekniske manøvrer. Inkluderer indre og ytre felger (4), senterringer (4) og 2x8 mm monteringsskruer (24). Accessory part for these models: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®

9883 - Lys Sett Pro Scale TRX-4M Chevrolet K10 Legg til skalabelysning til din TRX-4M Chevrolet K10 skala 1/18 som gjør det ekstra moro og gir ett godt utseende. Pro Scale ® Lighting Kit gir fungerende frontlykter, baklys, bremselys og varselblink som reagerer nøyaktig på inputene dine. Installasjonen er rask og enkel fordi programmeringen allerede er innebygd i ECM-2.5. Bare installer lysene i karosseri og koble til en enkelt ledning – det er alt som skal til! Pro Scale-lys er bygget for å håndtere alle værforhold med fullstendig vanntett konstruksjon. Inkluderer monteringsutstyr.   Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9811 body) Add scale lighting to your 1/18 scale TRX-4M™ Chevrolet® K10 for an extra layer of fun and good looks. The Pro Scale® Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction. Includes mounting hardware. Accessory part for these models: TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™

9884 -Lys Sett Pro Scale TRX-4M Ford F-150 Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9811 body) Legg til skalabelysning på din 1/18-skala TRX-4M Ford F-150 High Trail Edition™ for et ekstra lag med moro og godt utseende. Pro Scale Lighting Kit legger til fungerende frontlykter, baklys, bremselys og nødblink som reagerer nøyaktig på dine inntrykk. Installasjonen er rask og enkel fordi programmeringen allerede er innebygd i ECM-2.5™. Bare installer lysene i huset og plugg inn en enkelt ledning – det er alt! Pro Scale-lys er laget for å tåle alle værforhold med en helt vanntett konstruksjon.®®® Accessory part for these models: TRX-4M™ 1/18 1979 Ford F-150

ARA702018 - Skruer Maskinskrue Hex Senkehode 1.6x12mm (10) These high-quality Flat Head Screws are the perfect items for servicing your ARRMA vehicle. Includes 10 x Flat Head M1.6 x 12mm Screw Features Strong steel material for long-lasting durability and consistent fit Precision manufactured threads for fast and easy maintenance Bagged in multiples so you always have spares    

BDTRX-18T-400 1/18 Clear Body Pre-Cut TRX-4M (1) Klippet/klart lexan klipsless karosseri for bl.a Traxxas TRX-4M bilene. Det eneste polykarbonatkarosseriet på markedet for Traxxas TRX-4M Ideen bak prosjektet var å tilby noe helt annet enn de stive, tunge og ikke-tilpassbare karosseriene som Traxxas leverer i bokssettet. Vi identifiserte to moderne terrengkjøretøy som er helt forskjellige fra hverandre, og takket være nøye design tilbyr vi to karosserier, solgt transparente og tilpassbare etter din smak, som er perfekt "plug & play" med originalen: etter maling kan du bare koble av standardkarosseriet med et klikk og hekte på en av våre med et klikk! Premium Kvalitet først og fremst Vår filosofi gjør at vi ikke nøyer oss med middelmådighet eller spekulasjon, for hvert prosjekt følger vi alltid den samme felles tråden: det beste eller ingenting. For å skaffe produkter som fullt ut oppfyller våre forventninger, dedikerer vi måneder til virtuell design og rendering for å kunne evaluere eventuelle forbedringer eller detaljer som skal korrigeres. KVALITET uten kompromiss er grunnlaget for alt vi lager, de to kroppene for TRAXXAS® TRX-4M er intet unntak og representerer den perfekte implementeringen av vår filosofi som driver oss til å bli bedre og som oppmuntrer oss til å bruke vår kunnskap tilegnet gjennom over 19 års erfaring. Egenskaper De to kroppene selges separat, klare og ferdigkuttede, utviklet eksklusivt for installasjon på 1/18 skala TRAXXAS® TRX-4M-modellen. Laget av høykvalitets og ekte polykarbonat Lexan® Solgt klart med beskyttelsesfilm utenpå Pakken fulgte med et ferdigklippet dekalsark og vindusmasken Settet inkluderer også plastklips spesielt designet for å feste karosseriet til chassiset, ved å bruke det samme "klipsløse" systemet som standardkarosseriet 'Klipsløst' system som utgjør hele forskjellen! Fjern den stabile karosseriet med et klikk og installer en av våre med et klikk: om bare noen øyeblikk vil din TRX-4M få et helt annet og unikt utseende takket være lakken din. I tillegg til karosseriet og klistremerkene inkluderer settet også plastklips som vi har spesialdesignet for å utnytte karosseriets feste-/avkoblingssystem til chassiset maksimalt. Ingen stygge og urealistiske utvendige metallklips, men en 'ren' og usynlig festing som opprettholder samme realisme som det originale byggesettet.

BDTRX-18W464 1/18 Clear Body Pre-Cut TRX-4M (1) Klippet/klart lexan klipsless karosseri for bl.a Traxxas TRX-4M bilene. Det eneste polykarbonatkarosseriet på markedet for Traxxas TRX-4M Ideen bak prosjektet var å tilby noe helt annet enn de stive, tunge og ikke-tilpassbare karosseriene som Traxxas leverer i bokssettet. Vi identifiserte to moderne terrengkjøretøy som er helt forskjellige fra hverandre, og takket være nøye design tilbyr vi to karosserier, solgt transparente og tilpassbare etter din smak, som er perfekt "plug & play" med originalen: etter maling kan du bare koble av standardkarosseriet med et klikk og hekte på en av våre med et klikk! Premium Kvalitet først og fremst Vår filosofi gjør at vi ikke nøyer oss med middelmådighet eller spekulasjon, for hvert prosjekt følger vi alltid den samme felles tråden: det beste eller ingenting. For å skaffe produkter som fullt ut oppfyller våre forventninger, dedikerer vi måneder til virtuell design og rendering for å kunne evaluere eventuelle forbedringer eller detaljer som skal korrigeres. KVALITET uten kompromiss er grunnlaget for alt vi lager, de to kroppene for TRAXXAS® TRX-4M er intet unntak og representerer den perfekte implementeringen av vår filosofi som driver oss til å bli bedre og som oppmuntrer oss til å bruke vår kunnskap tilegnet gjennom over 19 års erfaring. Egenskaper De to kroppene selges separat, klare og ferdigkuttede, utviklet eksklusivt for installasjon på 1/18 skala TRAXXAS® TRX-4M-modellen. Laget av høykvalitets og ekte polykarbonat Lexan® Solgt klart med beskyttelsesfilm utenpå Pakken fulgte med et ferdigklippet dekalsark og vindusmasken Settet inkluderer også plastklips spesielt designet for å feste karosseriet til chassiset, ved å bruke det samme "klipsløse" systemet som standardkarosseriet 'Klipsløst' system som utgjør hele forskjellen! Fjern den stabile karosseriet med et klikk og installer en av våre med et klikk: om bare noen øyeblikk vil din TRX-4M få et helt annet og unikt utseende takket være lakken din. I tillegg til karosseriet og klistremerkene inkluderer settet også plastklips som vi har spesialdesignet for å utnytte karosseriets feste-/avkoblingssystem til chassiset maksimalt. Ingen stygge og urealistiske utvendige metallklips, men en 'ren' og usynlig festing som opprettholder samme realisme som det originale byggesettet.

INJORA - Skruesett Stainless Steel TRX-4M (9746X) INJORA M1.6 M2 M2.5 Grade 12.9 Stainless Steel Hex Screws Nuts Hardware Kit for 1/18 TRX4M (4M-15) Suit for: 1/18 RC Crawler TRX4M Note: This kit does not include the screws used in the stock diff covers Features: Screws are Made of high quality Grade 12.9 Stainless Steel Stainless Steel Screw Kits are far superior to the screws that come stock with your RC No more bent, rusted, or corroded screws Come with a box, easy to take and store Various sizes screws and parts meet your need Screw Kit Includes: 10* M1.6*7mm Screws 12* M1.6*12mm Screws 10* M2*4mm Screws 45* M2*6mm Screws 10* M2*8mm Screws 10* M2*12mm Screws   8* M2.5*8mm Screws 10* M2.5*10mm Screws 10* M2.5*12mm Screws 20* M2.5*14mm Screws 15* M2.5*18mm Screws   5* M2.5*21mm Screws   3* M3*6mm Flat head screws 20* M3*6mm Pins   8* M3*6mm Pins 10* M2.5 Nuts

INJORA 10T Pinion 0.4 mod for TRX4M 2204 Fat Viper Brushless Motor Only compatible with INJORA TRX4M 2204 Fat Viper Motor. Not compatible with INJORA SCX24 2204 Fat Viper Motor! Features: Made of stainless steel, durable in use Come with 2 stud screws and a 0.9mm hex key wrench Specifications: Material: Stainless Steel Motor Pinion: 0.4mod 10T For Motor Shaft Diameter: 2mm Length : 7.4mm

INJORA 11T Pinion 0.4 mod for TRX4M 1721 Purple Viper Brushless Motor Only compatible with INJORA TRX4M 1721 Purple Viper Motor. Not compatible with INJORA SCX24 1721 Purple Viper Motor! Features: Made of stainless steel, durable in use Come with 2 stud screws and a 0.9mm hex key wrench Specifications: Material: Stainless Steel Motor Pinion: 0.4mod 11T For Motor Shaft Diameter: 2mm Length : 7.8mm

INJORA 2PCS 14g/pcs Brass Rear Axle Counterweights for 1/18 TRX4M Passer ikke med Traxxas originale Beadlock og Alufelger. Only compatible with: 1/18 TRX4M rear axle INJORA Aluminium TRX4M rear axle Features: High precision CNC machined Etched with the INJORA logo 14g/pcs, add weight to the axle which lower the center of gravity, increase the stability Specifications: Part Number: 4M-30 Material: Brass Color: Black, Grey, Gold Quantity: 2PCS Weight: 14g/pcs (0.49oz) Package List: 2 * Brass Rear Axle Counterweights

INJORA 53mm Aluminum Oil Shocks for 1/18 TRX4M (4) 4 stk justerbare optionsdempere 53mm for bl.a TRX-4M bilene, dempere kommer uten olje. INJORA 53MM Threaded Shock Absorber Oil Damper for 1/18 RC Crawler TRX4M Upgrade Compatible with: 1/18 RC crawler TRX4M Recommended shock oil weight: 20-40wt Note: The shock oil is not included! Adjusting the nut ring to shorten the spring gives better rebound capability. Features: Two spring rates included (0.45 0.5mm) CNC machined Aluminum shock bodies Nylon Bottom Rod End Telescopic design for maximum travel Threaded shock bodies for quick pre-load adjustments Specifications: Part Number: 4M-24 Color: Black, Red, Grey Full Length: 60mm (2.36in) Extended Length (eye to eye): 53mm (2.09in) Compressed Size (eye to eye): 39mm (1.54in) Maximum Travel: 14mm (0.55in) Spring Length: 43mm(1.69in) Each Weight: 6g (0.21oz) Springs: Softer: Black, Wire diameter: 0.45mm Stiffer: Silver, Wire diameter: 0.5mm

INJORA 8PCS Brass High Clearance Links Set for 1/18 TRX4M Defender-Bronco High Clearance Lenkearmsett for bl.a TRX-4M bilene INJORA 8PCS Brass High Clearance Links Set for 1/18 RC Crawler TRX4M Upgrade Parts (4M-20) Only Compatible with: 1/18 TRX4M Defender 1/18 TRX4M Bronco How to use spacers: You can use the little spacers to extend the upper links to change the angle of your drive shafts and give you a little more clearance. I recommend using 2 spacers on each upper link end. Features: Comes with some 1mm spacers so you can extend the links Bent links have higher clearance in climbing Plastic rod ends Brass links and pivot balls Etched with the INJORA logo Specifications: Part Number: 4M-20 Link Material: Brass Rod Material: Plastic Quantity: 8PCS Weight: 38g (1.34oz) Package List: 1 * High Clearance Links Set

INJORA Aluminum Shock Mounts Towers for 1/18 TRX4M Note: Please remove the bumpers first and then you can simply change the shock mounts without removing the wheels Only compatible with: 1/18 TRX4M Defender Features: These shock mounts can lift the body by up to approx 8.5 mm CNC machined, black anodized Numerous mounting locations Easy to adjust the shock absorbers for better suspension Specifications: Part Number: 4M-35 Material: Aluminum Color: Black Weight: 14g (0.49oz) Installation Tips: FL: Front Left FR: Front Right RL: Rear Left RR: Rear Right

INJORA Black Brass Upgrade Parts for 1/18 TRX4M Messingsett for TRX-4M Styrelink : INJORA 12g Brass Steering Link for 1/18 TRX4M (4M-06) Compatible with: 1/18 TRX4M Defender, Bronco, High Trail K10, High Trail F150 Note: The steering link is not compatible with extended axles! Features: Made from brass for increased strength The link features a high clearance bend to prevent front tires from rubbing on the steering link at maximum steering angle Eliminate flex and increase the steering precision of your TRX4M with this brass steering link Precision brass CNC machined Etched with the INJORA logo Enhanced design and durable in use C-Hub : INJORA 4g/pcs Brass Caster Blocks C Hub Carriers for 1/18 TRX4M (2) (4M-05) Note: the bushings must be placed between the C hub and the steering knuckle Compatible with: 1/18 TRX4M Defender, Bronco, High Trail K10, High Trail F150 Features: Made of brass material High precision CNC machined Easy to install and durable Increase the weight, make car more stable Svingarmer : INJORA 11g Brass Steering Blocks Knuckle for 1/18 RC Crawler TRX4M Upgrade Parts (4M-04) Compatible with: 1/18 TRX4M Defender, Bronco, High Trail K10, High Trail F150 Features： Made of brass material High precision CNC machined 11g/pcs, add weight for each side to improve anti-rollover stability and climbing capability Differensial lokk : INJORA 2PCS 11g Brass Front Rear Axle Cover for 1/18 RC Crawler Car TRX4M Upgrade Parts (4M-01) Compatible with: 1/18 TRX4M Defender, Bronco, High Trail K10, High Trail F150 Features: CNC machined brass Replace original plastic parts, easy to install 11g/pcs, add weight to the axle which lower the center of gravity, increase the stability Fit both front and rear axles

INJORA Black Hardened Steel Drive Shafts for 1/18 TRX-4M Forsterkede mellomakslinger for TRX-4M Bronco/Defender (Komplett foran/bak) INJORA Black Hardened Steel Drive Shafts with D-shaped Holes for 1/18 TRX4M (4M-50BK) Only Compatible with: 1/18 TRX4M Defender 1/18 TRX4M Bronco Features: These drive shafts are machined to be able to be in phase (correct phasing). D-Shaped holes and rounded rectangle holes offer tighter connection to transmission and axles Enhanced structure design for long-life durability Hardened steel materials construction Scale Joint and spline diameter size for realistic appearance Etched with the INJORA logo Specifications: Part Number: 4M-50BK Material: Hardened Steel Weight: 22g (0.78oz) Color: Silver Package List: 2 * Drive Shafts 4 * Screws

INJORA BUG18-18 Lexan Body for 1/18  INJORA TRX4M Universal Chassis Ferdig lakkert med interiør, beregnet på INJORA TRX-4M chassis, men kan nok modifiseres til å passe andre 1/18 crawlere. Note:  Not compatible with 1/18 TRX4M stock chassis! Only compatible with INJORA TRX4M Universal Chassis (4M-89, 4M-111) Front headlights are optional: cover with stickers if not installed, or drill and glue to mount light pods Features: Classic Bug styling inspired by iconic desert buggies, delivering a retro off-road look Made from Durable PC Material  Interior and Roll Cage Molded from Nylon Equipped with white headlights for illumination INJORA Detailed Scale Sticker The front of the body is secured with a magnetic mount, while the rear is fastened with R-clips for easy removal Brushless Motor Compatibility: Supports 1721/2204 brushless motors, no interior mods needed Specifications: Part Number: BUG18 Material: Polycarbonate, Nylon Color: Clear, Black, Purple, Orange, Burgundy Body Weight: 74g  Headlight Color: White Size: 219.3*103.8*69mm Wheelbase: 155mm Package List: 1* Body  1* Interior 1* Roll Cage 1* Front Bumper 2* Rock Sliders 1* Magnetic Body Mount 1* Headlights  2* R-clips 1* Sticker 1* Manuals

INJORA Hardened Steel Drive Shafts for 1/18TRX-4M Long Wheelbase Forsterkede mellomakslinger for TRX-4M High Trail (Komplett foran/bak) Compatible with: 1/18 RC Crawler TRX4M High Trail K10 F150  Features: Hardened steel materials, in phase design Enhanced structure design for long-life durability Scale Joint and spline diameter size for realistic appearance D-shaped and rounded rectangle holes design offer tighter connection to transmission and axles Specifications: Part Number: 4M-84BK Material: Hardened Steel Weight: 23g (0.81oz) Package List: 2 * Drive Shafts 4 * Screws

INJORA IR60-18 Body for 1/18 TRX4M Defender-Bronco INJORA IR60-18 Pickup Hard Body Shell with Bed Rack for 1/18 RC Crawler TRX4M Defender Bronco Upgrade Only compatible with: Stock TRX4M Defender & Bronco chassis  INJORA Universal TRX4M chassis Features:  ABS pickup hard body with rear bed rack. Come with two styles of front grille. Rubber rearview mirrors for better durability. Four screws, endless possibilities. Attach the body shell to the chassis with just a twist. Easy as that! Front Clipless Mounting design and Rear hook-and-loop hinge design. Its hook-and-loop hinge design lets you reach the chassis and battery quickly by simply swinging the body up. Suit for your TRX4M Bronco and Defender chassis and you're ready for fun and adventure! Specifications: Part Number: IR60 Material: ABS Plastic Color: Pearl White, Black, Grey, Green, Purple, Blue White, Red White, Chrome Weight: 78g (0.172lb) Wheelbase: 155mm (6.10in) Size: 225*90*67mm (8.86*3.54*2.64in) Required tools：1* 0.05" hex screwdriver (1.27mm or 1.3mm is also fine) Package List: 1* IR60-18 Body Kit 1* Front & Rear Led Light 1* Body Assembly Manual You may need: 3D printing file of the truck bed

INJORA LS 59mm Aluminum Oil Shocks for 1/18 TRX4M (4) 4 stk justerbare optionsdempere 59mm for bl.a TRX-4M bilene, dempere kommer uten olje. INJORA LS(Lower Spring) 59mm Aluminum Oil Shocks for 1/18 TRX4M Note:  The shock oil is not included. Add preload using the threaded collar for stronger rebound. Features: CNC-machined aluminum construction Two spring rates included Lower spring layout for improved CG and reduced chassis interference Threaded shock bodies with interchangeable gold and black preload collars Shock Specifications: Part Number: 4M-122 Product Series：LS Shocks (Lower Spring) Color: Black / Silver Full Length: 65mm Extended Length (eye-to-eye): 59mm Compressed Length (eye-to-eye): 42mm Weight (each): 5.0g Spring Specifications: Inner Diameter: 8.5mm Free Length: 26mm Total Coils: 10 Wire Diameter: 0.45mm (Green Mark), 0.5mm (Purple Mark) Package List: 4 × Shocks 4 × Extra Springs

INJORA Overdrive 9% 22/12T Alloy Steel Helical Gears for 1/18 TRX4M 1 drevsett for 1 aksel, 9% overrgiring Compatible with: 1/18 TRX4M stock axles INJORA TRX4M axles Note: Each axle requires 1 set of gears (a ring gear and a pinion gear). Overdrive the front(or underdrive the rear) will pull you faster in the front, it allows you to climb better and reduce rollover. Do not swap gears from different gear sets! They are different even if they have the same number of tooth. If you have some free play between gears, you can add a shim or 2 between pinion gear and bearing to push pinion teeth deeper into ring gear teeth. 22T/12T Overdrive Gears: Increase speed approx 9% Features: Replace the stock plastic gears, fit TRX4M front or rear axles Helical gears offer greater strength and smooth operation than the factory spur gears Less vibration, less noise, less wear then stock gears CNC machined 20CrMo Alloy Steel Gears Specifications: Material: 20CrMo Alloy Steel Weight: about 7g/set

INJORA Roverin M30 G2 FOC Sensored Brushless ESC & Motor for 1/18 TRX4M INJORA Roverin M30 G2 FOC Sensored Brushless ESC & Motor Combo for 1/18 TRX4M Ascent-18 Brushed(4800KV) What's New in G2? The Roverin M30 G2 features essential hardware upgrades to improve reliability and thermal performance: 1. Enhanced Heat Management: Optimized ESC circuitry to effectively reduce operating temperatures. 2. Refined ESC Outlets: Redesigned wire exits to prevent accidental short circuits. 3. Upgraded Motor Leads: Reinforced motor wiring with superior high-temperature resistance. Note:  Compatible with: Traxxas TRX4M, Ascent-18 Brushed Transmission: compatible with stock TRX4M transmission and INJORA TRX4M metal transmission (It desn't fit 370 transmission), stock Redcat Ascent18 transmission, INJORA Ascent18 metal transmission. Radio system: Not compatible with the stock TRX4M radio. Requires a new transmitter and receiver (with CH2). Battery: compatible with 2S and 3S batteries The BEC supports up to 10V output for low-current applications only (e.g., powering receivers or sensors). For high-current servos, we recommend using 6V–7.4V for reliable and safe operation. Features: Wireless Bluetooth & Smart App Tuning: Built-in Bluetooth for easy adjustments—no extra devices needed! Enjoy real-time tuning, data logging, and firmware updates via the INJORA Link app. (iOS: Download from the App Store; Android: Get it on Google Play.) Powerful Low-Speed Torque & Smooth Operation: The FOC algorithm ensures precise power control, delivering strong torque even at extremely low speeds for smooth and responsive driving. Adjustable Drag Brake (Up to 200%): Enhanced climbing and speed control. Improved efficiency and reduced noise. Twice the braking power of standard brushless systems, ensuring superior downhill control. Smart Magnetic Encoder Motor: Stable three-phase signal output for precise control. Accurate sensor feedback eliminates jitter and enhances smooth acceleration. IP67 Waterproof & Dustproof: Fully protected against water, mud, dust, and snow, ensuring durability in extreme environments. Comprehensive Protection System: Low Voltage Protection, Overheat Protection, Overvoltage Protection, Overcurrent Protection, Phase Loss Protection, Throttle Signal Loss Protection, Motor Disconnection Protection ESC Specification: ESC Type: FOC Brushless ESC (FOC-M30) Continuous Current: 30A Peak Current: 100A Battery Support: 2-3S LiPo BEC Output: 0-10V adjustable, 5A continuous, 10A peak Size: 35.5×16.3×16.3mm Weight: 25g Waterproof: Yes Motor Specification: Motor Type: Brushless Sensored 180 Motor Motor KV: 4800KV At no-load(7.4V): RPM: 35000 ±10%  Current: <0.9A At load(7.4V): RPM: 31000 ±10%  Current: 3.0A     Battery Support: 2-3S LiPo Size: 42.7×18×20.5mm Weight: 36.5g Motor Pinion: 0.4mod 11T Waterproof: Yes Package List: 1 × ESC 1 × Motor 1 × Battery Adapter Cable (Female XT30 to Male TRX-4M) 1 × Battery Adapter Cable (Female XT30 to Male JST-RCY) 1 × Battery Adapter Cable (Female XT30 to Male JST-PH2.0) 1 × User Manual

INJORA Underdrive 16.67% 24/10T Alloy Steel Helical Gears for 1/18 TRX4M 1 drevsett for 1 aksel, 16.67% Undergiring Compatible with: 1/18 TRX4M stock axles INJORA TRX4M axles Note: Each axle requires 1 set of gears (a ring gear and a pinion gear). Overdrive the front(or underdrive the rear) will pull you faster in the front, it allows you to climb better and reduce rollover. Do not swap gears from different gear sets! They are different even if they have the same number of tooth. If you have some free play between gears, you can add a shim or 2 between pinion gear and bearing to push pinion teeth deeper into ring gear teeth. 24T/10T Underdrive Gears: Decrease speed approx 16.67% Features: Replace the stock plastic gears, fit TRX4M front or rear axles Helical gears offer greater strength and smooth operation than the factory spur gears Less vibration, less noise, less wear then stock gears CNC machined 20CrMo Alloy Steel Gears Specifications: Material: 20CrMo Alloy Steel Weight: about 7g/set

INJORA Underdrive 32% Stainless Steel Transmission Gear Set for 1/18 TRX4M  Drevsats i metall for TRX-4M komplett sett 24.4:1 reduksjon INJORA Stainless Steel 24.3:1 Low Range Transmission Gear Pinion Set for 1/18 RC Crawler Car TRX4M Upgrade (4M-36) Note: Don't forget to grease the gears!!! These gear sets have the same pinions as the ones on our 180 motors. Compatible with: 1/18 TRX4M, also compatible with INJORA 370 transmission Features: 40.3:1 Underdrive Gear Set: Decrease speed approx 59% 16.61:1 Gear Set: As stock, do no change speed 9.7:1 Overdrive Gear Set: Increase speed approx 71% 24.4:1 Underdrive Gear Set: Decrease speed approx 32% CNC machined Made of high quality stainless steel Ultra-low 40.3:1 reduction ratio for maximum rock-climbing power and unstoppable torque Includes all transmission gears and a 11-tooth motor pinion Specifications: Part Number: 4M-36 Material: Stainless Steel Reduction Ratio: 40.3:1, 16.61:1, 9.7:1, 24.4:1 Motor Pinion: 11T Weight: 15g (0.53oz) Package List: 1 Set Transmission Gears

INJORA Underdrive 59% Stainless Steel Transmission Gear Set for 1/18 TRX4M (9776R) Drevsats i metall for TRX-4M komplett sett 40.3:1 reduksjon INJORA Stainless Steel 40.3:1 Low Range Transmission Gear Pinion Set for 1/18 RC Crawler Car TRX4M Upgrade (4M-36) Note: Don't forget to grease the gears!!! These gear sets have the same pinions as the ones on our 180 motors. Compatible with: 1/18 TRX4M, also compatible with INJORA 370 transmission Features: 40.3:1 Underdrive Gear Set: Decrease speed approx 59% 16.61:1 Gear Set: As stock, do no change speed 9.7:1 Overdrive Gear Set: Increase speed approx 71% 24.4:1 Underdrive Gear Set: Decrease speed approx 32% CNC machined Made of high quality stainless steel Ultra-low 40.3:1 reduction ratio for maximum rock-climbing power and unstoppable torque Includes all transmission gears and a 11-tooth motor pinion Specifications: Part Number: 4M-36 Material: Stainless Steel Reduction Ratio: 40.3:1, 16.61:1, 9.7:1, 24.4:1 Motor Pinion: 11T Weight: 15g (0.53oz) Package List: 1 Set Transmission Gears

Mellomakslinger 36 gram Stål F/B TRX-4M (erstatter 9751) Mellomakslinger i stål med messingledd for Foran-Bak TRX-4M (Ikke Traxxas original), disse passer både hjulbase 155mm og 162mm Bilde 2 kun for illustrasjon, leveres i sort.   Reservedel Option for TRX-4M: TRX-4M Ford Bronco 2021 1/18 RTR  TRX-4M Land Rover Defender 1/18 RTR  TRX-4M Chevrolet K-10 High Trail 1/18 RTR TRX-4M Ford F-150 High Trail 1/18 RTR

Surpass Gecko Hobby Combo Sensor 18A ESC m/2030 3500KV BL WP Sensorbasert børsteløs kombo som passer godt til TRX4-M 1/18 og andre i denne størrelsen. ( må kobles opp med ekstern motaker) Surpass Hobby KingKong Combo leveres her med 2030 børsteløs motor med pinion montert for TRX-4M 1/18-biler på 1-2S LiPo og 18A fartsregulator/ESC med TRX4-M batterikontakt. Fartsregulator er plug-and-play mot motor med ferdig loddede kontakter, ESCen kommer med en 5V/500mA linær bec. Spesifikasjoner motor:   Størrelse motor 2030 KV 3500 Dimensjoner 17.9x26x10.4mm Vekt ca. 9.5gram Spesifikasjoner ESC:   Effekt 18A Vekt 37gram Vannbestandig IPX5