Rc karosserier, lexan, plast, drift touring, Monster, buggy, truggy

Tamiya 19804558 - Karosseri og Vinge Super Hot Shot Utrimmet og ulakkert karosseri for flere av Hot Shot bilene (Dekaler kommer i tillegg.)

Tamiya 19805020 - Hornet Klart Lexan body med Vinge Ulakkert lexan karosseri med vinge for Tamiya Hornet 58045/58366, leveres uten maskering og dekaler.

Tamiya 22023 - TT-02 Chassis Cover Set (OBS passer ikke TT-02B) ill.foto- Chassis er ikke med ★This 0.8mm thickness polycarbonate set features a chassis cover and wheel well liners to protect your TT-02 chassis from the intrusion of dust and dirt, reducing damage and easing your maintenance of the model. ★Also included is a cover for the receiver switch and touch fastener tape. ★Not for use with Item 54549 and 54733 with short wheelbase cars.   ★Left: Image shows an example of this product fitted to the TT-02 Chassis from separately-sold Item 58659. ★Right: Polycarbonate cover and front wheel well liners are a snug fit, and affixed using touch fastener tape. Screws are included.   Compatible Chassis TT-02, TT-02D, TT-02FT, TT-02 Type-S & TT-02 Type-SR Chassis *May come into contact with tires when using with short wheelbase and Item 54549 and Item 54733. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of December 20, 2021. Specifications are subject to change without notice.

Tamiya 41709 - Fiat Abarth 1000 TCR Berlina Corse 210mm WB Klart 1/10 karosseri i lexan med hardplastdeler (PC-ABS) Motor, Speil, Lykteringer , Motorlokk, dekaler medfølger Samme karosseri som medfølger MB-01 58721 Spesifikasjoner: Lengde : 355mm Bredde : 155mm Høyde : 115mm Hjulbase : 210mm

Tamiya 51358 1/10 Mercedes-Benz Unimog U406 Clear Body Set Body for wheelbase 242mm, passer CC-01/CR-01   This is the Tamiya 1/10 R/C M-B Mercedes Unimog body set for R/C Cars. This is the clear plastic piece that covers the vehicle's chassis and provides the "shape" of the vehicle.       FEATURES Compatible with all CR-01 chassis Highly detailed body and cutting lines Body has a plastic protective film on the outside that should be removed after painting     INCLUDES One Tamiya 1/10 Scale Mercedes M-B UNIMOG body and bub body One peel-off decal sheets with lights, all body trim and sponsor decals One window masking sheet Black parts tree for the mirrors Metal plated parts tree with front grille and light cases All mounting hardware and body hold down pins Instructions     REQUIREMENTS Polycarbonate paint for painting the inside of the body. The color choice is up to the modler Body scissors to cut out the body Hobby knife or scissors to cut out the decals     SPECIFICATIONS Body- Length: 15-1/4" (427mm) Width: 7" (190mm) at center Height: 6-1/4" (95mm) top of cab Height: 3-1/4" ( mm) top of bed WB : 242mm Sub Body- Length: 9-1/4" (184mm) Width: 5-1/8" (22mm) Height: 1" (22mm) at highest point

Tamiya 51364 - Subaru Impreza WRC 2008 1/10 Clear Body 1/10 ulakket Subaru Impreza karosseri for bl.a TT-01-TT02-TA05ver2 - TA05-Ifs-TB-03 iFS-DF03-TGS SPESIFIKASJONER: Lengde : 430mm Bredde : 190mm Høyde : 130mm Hjulbase : 257mm Leveres uklippet og ulakkert, med maskeringer, dekaler, Bakvinge(spoiler) speil og lyktebrønner.

Tamiya 51473 - 1/10 Scirocco GT24 Clear Body 258mm WB Blankt lexanbody for 1/10 Touring/Drift med hjulbase 258mm 190mm bredde. Passer på TT-01/TT-02 og andre 1/10 med 258mm hjulbase. Leveres med maskering, dekaler, speil, takvinge, bakspoiler i sort plast  

Tamiya 51560 1/10 Toyota FJ Cruiser Clear Body Set Clear Body for wheelbase 267mm, passer CC-01/CR-01 This spare body parts set depicts the FJ Cruiser, a popular vehicle manufactured by Toyota. It is designed to fit the Tamiya CC-01 and CR-01 chassis platforms.  The polycarbonate body accurately recreates that of the FJ cruiser. Molded parts are included to recreate the grille, light cover and spare tire case. Includes stickers to recreate markings, plus masking stickers for use when painting. Can be used with separately sold LED units. Compatible with CC-01 chassis (267mm wheelbase only, additional propeller shaft may be required) and CR-01 chassis cars.   FEATURES Clear molded polycarbonate construction Separate clear molded grille, light cover and spare tire case May be used with LED light units (sold separately)     INCLUDES Toyota FJ Cruiser Body, with Grille, Light Cover and Spare Tire Case Window Mask Sheet, Decal Sheet, Mounting Hardware and Instructions     REQUIREMENTS Body scissors and reamer Polycarbonate safe spray or brush-on paint     SPECIFICATIONS Length: 17" (432mm) Width: 7.5" (190mm)  Height: 5.1" (129mm)

Tamiya 51573 - 1/10 Peugeot 306 Maxi Clear Body • Peugeot 306 Maxi er autentisk gjenskapt i lett polykarbonat. • Separate plastdeler gjenskaper sidespeil og bakvinge. • Inkluderer merke dekaler og maskering for bruk under malejobben. • Metalldeler er også inkludert for feste. • Kompatibel med BT-01 chassisbiler med lang akselavstand – 257mm • Kommer i en smart, dedikert pappeske. Spesifikasjoner: Lengde : 404mm Bredde : 187mm Hjulbase : 257mm Høyde : 115mm   Lakk anbefalt av Tamiya: PS-30 Brilliant Blue PS-31 Smoke TS-49 Bright Red

Tamiya 51611 1/10 Toyota Hilux Extra Cab Clear Body Set Uklippet og ulakkert lexankarosseri for CC-02-CC-01, passer også andre som har hjulbase 267mm, inkludert  krommet lyktehus for 5mm led hovedlys, 3mm sidelys,  sidespeil,  baklys holdere for 5 og 3mm led, maskering til vinduer, dekaler og monteringsskruer. Lakkeres med PS lakk på karosseriet  Specs: Hjulbase : 267mm Lengde : 455mm Bredde : Over hjul 200mm Høyde :  140mm This is a spare body set of the Toyota Hilux Extra Cab. It is made of polycarbonate material, which can be painted using Tamiya’s PS Spray Colors. The included body stickers and livery depict the 8th generation special full-size version of the Extra Cab which Toyota’s British subsidiary had made in the colors of Tamiya’s legendary Bruiser as a tribute to the model. • The rugged Hilux Extra Cab form is depicted in lightweight and durable polycarbonate, with separate side mirror and light case parts. • Compatible with white 3mm (x4) & 5mm (x2) diameter LEDs for headlights and red 3mm (x4) & 5mm (x2) diameter LEDs x6 for the rear. • Marking stickers, plus window masking stickers for use when painting included. • Compatible with long (267mm) wheelbase CC-01 chassis cars.

Tamiya 51613 - Buggyra Fat Fox Clear Body Set 1/14 (TT-01-02) Blankt og uklippet 1/14 lexanbody for bruk på 1/10 biler med wheelbase 260-270mm. Monteringsdeler for LED lys bak og 8 lange karosseristolper og karosseriklips er inkludert. Specs: Hjulbase : 257mm Lengde : 420mm Bredde:  187mm Høyde :  188mm

Tamiya 51616 - VW Buss Type 2 (T1) 23 Vindu WB239mm (1) Klart uklippet lexan karosseri for 1/10 biler med hjulbase 239mm Karosseriet er laget av 1,0 mm polykarbonat, noe som gjør det veldig solid. • replika av 23-vindus Type 2 T1-buss, med separate støpte plastdeler inkludert,støtfanger, lyskasser og sidespeil. • Dekalark og maskering for bruk ved lakkering er inkludert. • Kompatibel med M-Chassis-biler med 239 mm L-akselavstand og forlengede karosseristolper.

Tamiya 51623 1/10 Mercedes-Benz G500 Clear Body Set Uklippet og ulakkert lexankarosseri for CC-02-CC-01, passer også andre som har hjulbase 267mm, inkludert front krommet grill med lykter for 5mm led, *plast sidespeil, *plast reservehjulscover, *plast baklys holdere for 5mm led, maskering til vinduer, dekaler og monteringsskruer. Lakkeres med PS lakk på karosseriet og TS på *plast detaljer. Specs: Hjulbase : 267mm Lengde : 440mm Bredde : Over hjul 195mm Høyde :  170mm This is a spare Tamiya body parts set of the Mercedes-Benz G 500. It is made of durable polycarbonate and can be painted and finished with Tamiya’s PS and TS spray paints for the most realistic finish. • 1/10 scale R/C body parts assembly kit. • Made of polycarbonate, with separately molded ABS plastic parts included for the front grille, side mirrors, spare tire cover and rear light cases. • Paint masking stickers for use in the painting process included. • Compatible with 267mm wheelbase CC-02 and CC-01 chassis models.  

Tamiya 51635 1/10 Volkswagen Karmann Ghia Karosseri 175mm Klart lexan karosseri for M chassis med hulbase 239mm This is a spare body parts set of the Volkswagen Karmann Ghia. It is made of durable polycarbonate material. The body is made to fit Tamiya’s M-Chassis machines. • 1/10 scale R/C body parts assembly kit. • Made of lightweight and durable polycarbonate. • Separate plated parts depict side mirror, bumpers and light cases. • Includes marking stickers, and window masking stickers for use during the painting process. • Compatible with 239mm wheelbase M-06L, and M08L chassis configurations.

Tamiya 51678 - Karosseri 1/10 AU TOM’s GR Supra 190mm Klar Lexan TOM’s GR Supra ulakkert lexan karosseri. Laget av 1mm tykk polykarbonat. Det følger med maskering til vinduer og dekaler for å fullføre karosseriet. ABS deler følger med (speil og vinge). Lyktebrønner i lexan er også inkludert. Passer til TT-01, TT-01 Type-E, TT-02 (men IKKE TT-02B og TT-02T), TC-01, TA06, TA07, TA08 og TB-05 chassis biler. Spesifikasjoner: Lengde : 440mm Bredde : 190mm Høyde : 115mm Hjulbase : 258mm

Tamiya 51690 -  1/10 Alpine A110 Jägermeister 1973 Clear Body Klart lexan karosseri for M chassis med hulbase 210mm, leveres med maskering, dekaler, plastdetaljer om monteringsdetaljer. Passer de fleste M-chassis (ikke M-07). Spesifikasjoner:  Lengde : 395mm Bredde : 168mm Høyde : 110mm Hjulbase : 210mm This is a clear polycarbonate body parts set of the Alpine A110 Jägermeister 1973. It is made out of 1mm thick polycarbonate. The set includes masking seals for the windows and a sticker set to finish the iconic race car. • Includes marking stickers, and masking stickers for use during the paint job process. • Compatible with M-08 Concept, M-05 and M-06 chassis cars. (Wheelbase: 210mm.) • NOTE: Does not fit on M-07 chassis. • Comes in a smart, dedicated cardboard box. • Includes marking stickers, and window masking stickers for use during the painting process.  

Tamiya 51710 - 131 Fiat Abarth Rally Olio WB 239mm (1) Klart uklippet lexan karosseri for 1/10 biler med hjulbase 239mm Lexan karosseri replika av Fiat 131 Abarth Rally Olio Fiat.  • Laget av slitesterk, lett polykarbonat. • Separat støpte plastkomponenter som bakvinge, takspoiler, tåkelykter, sidespeil og lyskasser. • Inkluderer dekalark og maskering for bruk under lakkeringsprosessen. • Hardware for plastedeler er inkl. • Kompatibel med MF-01X-chassis og andre med L (239 mm) akselavstand. • Kommer i en smart, dedikert pappeske. Spesifikasjoner: Bredde : 180mm Lengde : 380mm Høyde : 102mm Hjulbase CC : 239mm

Tamiya 51727 - Opel Kadett GT/E Karosseri WB 239mm 1-10 Tamiya 51727 - Opel Kadett GT/E Karosseri 1-10, Lett og holderbart, laget av polykarbonat, med deler laget av PC-ABS plast. Kommer med dekaler og maskering.  Kompatibel med LONG akselavstand (239mm) MB-01, M-06 chassis biler.

Tamiya 51751 Audi 90 Quattro Racing 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for 1/10 biler med 251-260mm hjulbase. 1:10 Audi Quattro 90 Racing karosseri. Laget i 1mm lettvekts polykarbonat. Plastdelene er laget i PC-ABS plastikk. Det følger også med maskering. Kompatibel med TT-01, TT-01 Type-E, TT-02 (unntatt TT-02B og TT-02T) og BT-01 chassis biler med 251mm akselavstand. Lakk anbefalt av Tamiya: PS-1 White PS-31 Smoke PS-41 Bright Silver TS-14 Black

Tamiya 54009 LED Light (3mm Red) (2) 3mm led pærer røde for bl.a TLU-01, denne har PH2.0 kontakt og passer ikke MFC Max 6.0V inn Hop-Up Options no.1009 Tamiya LED Light (3mm Red) Item No: 54009 ★These 3mm diameter red LEDs are for use with the Tamiya LED Light Unit (TLU-01). ★They recreate red taillights and brake lamps. ★Connectors ensure secure attachment. ★Two LEDs are included, plus clips for stowing cables. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54011 LED Light (5mm Yellow) (2) 5mm led pærer gule for bl.a TLU-01, denne har PH2.0 kontakt og passer ikke MFC Max 6.0V inn Hop-Up Options no.1011 Tamiya LED Light (5mm Yellow) Item No: 54011   ★These 5mm diameter yellow LEDs are for use with the Tamiya LED Light Unit (TLU-01). ★They are great for the recreation of fog lamps and the like. ★Connectors ensure secure attachment. ★Two LEDs are included, plus clips for stowing cables. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54100 Metal Plated Grill for Toyota LC 40 Grill for Toyota Land Cruiser 40 K-Part inkl speilsett

Tamiya 54139 - Touring Car Body Accessory Parts Set Karosseri og bil detaljer,  Hop-Up Options no.1139 1/10 Scale R/C Touring Car Body Accessory Parts Set Item No: 54139   ★Assorted accessory parts for that extra detail on your 1/10 scale R/C touring car model. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54298 - 1/10 Scale Touring Car Cockpit Set (Left-Hand Drive) Universalt touring interiør for 1/10 biler This Touring Car Cockpit Set provides scale realism with 190mm 1/10 scale Tamiya R/C touring cars ★Add even more realism to your 1/10 scale R/C touring car body with this set. ★Attachment is simple, using the included hook fastener tape. ★2 different driver helmet types (with and without visor) are included. ★Parts are molded in styrene resin and can be painted using Tamiya Color paints for plastic models. ★Stickers are included to recreate various instrumentation and helmet visor. Compatible Chassis TT-01 Type-E, TT-01 Type-ES, TT-01D Type-E, TT-02, TT-02RR, TT-02D, TT-02 Type-S TB-04, TB-04 PRO, FF-03 & FF-03 PRO Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54416 - 1/10 Scale 4x4 Vehicle Driver Figure Å legge til en figur på en kjøretøymodell øker dens realisme. Førerfiguren leveres originalt i Toyota Bruiser/Hilux Highlift og kan monteres i 2012-utgivelsen av Toyota Bruiser (RN36). Kan fint også brukes i andre 1/10 modeller. ★Driver figure perfect for use in models such as the 1/10 R/C Toyota Hilux High-Lift. ★Can be painted with Tamiya Color paints: acrylic, enamel, spray paints. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts.      

Tamiya 54491 - 1/10 Scale R/C Rally Car Cockpit Set (Left-Hand Drive) Dette er en oppdatert versjon av artikkel nr 50463 (RC Rally Car Cockpit Set). Cockpiten sett kan monteres på Tamiya 1/10 rallybil body kits for å legge på et ekstra nivå av realisme. Takket være den inkluderte uretansvampen, gjør at denne cocpiten er kompatibel med et stort utvalg av chassisbredder. Du maler den selv til ønset decor og farge skjema med Tamiya maling. Settet inneholder: . Cockpit og hjelm x1 . Urethane svamp  x1 . nydesignede klistremerker . Deler til feste cockpit til modell. ★Add another layer of realism to your rally car model with this set of parts! ★It includes components to recreate a cockpit interior with driver and co-driver. ★Urethane sponge is included to fill any gaps between body and cockpit. ★Cockpit and helmet parts are styrene, and so can be painted using Tamiya Color plastic paints. ★Marking stickers are included. ★Width: 160mm. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.  

Tamiya 54496 - WR-02 Sjåfør Figur Full Body Dette er den populære førerfiguren fra Wild Willy 2 byggesettet. Den leveres komplett med hjelm og hele kroppsdeler for å fullføre én førerfigur. Lakk og lim kommer i tillegg. Spesifikasjoner : Høyde :  Plastic assembly kit figure. Item includes parts necessary for attachment. Compatible with WR-02 chassis or can be modified to fit your custom creation.

Tamiya 54604 Body Mount Extension Set Karosseristolper som kan brukes på mange forskjellige biler. Dim: For 5.5mm stolper, forlenger med opp til 76mm. Leveres med 4 stk karrosseriklips.   This newly-designed body mount extension piece and snap pin set allows you to extend body mounts on your RC model car. They are intended to be used on those body posts which have been shortened for use with other bodies. They are compatible with a wide range of major Tamiya touring car and M-Chassis models. Contains 5.5mm Body Mount Extension x4, 6mm and 7mm Snap Pins x4 Usable with 5.5-6mm diameter body mounts. Compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts.

Tamiya 73023 Logo Plate (Photo-Etched) Logoplate med Tamiya logo i 4 størrelser  5 x 14x10mm 4 x 18x14mm 3 x 26x18mm 2 x 40x29mm Display Goods Series Tamiya Logo Plate (Photo-Etched) Item No: 73023   ★Let the world know where your modeling loyalties lie with this sheet containing photo-etched versions of the famed Tamiya twin star logo! ★Crafted in 0.3mm thickness stainless steel plate. ★Features standard and negative versions of the logo - four types, with fourteen logos in total. ★Sheet dimensions: 90mm x 90mm. Information is correct as of July 3, 2019. Specifications are subject to change without notice.

Tamiya 74004 Pinsett Rett, Straight Tweezers   These quality straight tweezers come in handy when adding small parts to your models and for other jobs requiring precision work.      Made from stainless steel with black cationic finish for long life     This is the Tamiya (#74004) – Tamiya Straight Tweezers – MK804

Tamiya 74005 Curved Lexan Karosseri Saks - Long Edge  Saks for klipping av karosserier/Canopy o.l Tamiya Craft Tools Series no.5 Curved Scissors for Plastic Item No: 74005   ★The curved blades on these scissors give a smooth and well-formed curved cut, perfect for use on subjects such as polycarbonate R/C car bodies. Not only that, cutting using the deepest part of the jaw gives a straight cut. Specifications are subject to change without notice.

Tamiya 74031 Decal Scissors (Spesialsaks for Dekaler) Spesialsaks designet for å klippe ut dekaler. The second application is for trimming R/C racing rubber tires. R/C racing rubber tires are generally soft and flash from the molding process needs to be trimmed away. Using Tamiya's carbon steel decal scissors makes this task easy and quick for both on-road and off-road rubber tires. These scissors may also be used for modifying rubber tires to suite the needs of the racer. Often times a racer may need to build a tire for a unique track condition. To do this the racer generally needs to precisely cut the tire that they are modifying and the Tamiya carbon steel decal scissors makes this task easy. These Tamiya Decal Scissors are made of high quality carbon steel and are perfect for two major applications. The first application is for cutting out your paper decals from a plastic model kit. The sharp carbon steel and fine point makes it easy for trimming the most intricate of decal designs. Note: The sharpness of the scissors will last long if used for paper decals only. Do not use for vinyl stickers like the ones found in an R/C car kit.

Tamiya 74050 Fine Pin Vise D 0.1-3.2mm Bitsholder for mikrobits fra 0.1 til 3.2mm diameter Model assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is compatible with 0.1mm-3.2mm diameter drill bits while the Rne Pin Vise S is designed for use with drill bits under 1 mm diameter.

Tamiya 74051 Fine Pin Vise S 0.1-1.0mm Bitsholder for mikrobits/bor fra 0.1 til 1.0 mm diameter Mange modelleringsoppgaver krever boring av hull i forskjellige størrelser. Fine Pin Vise D er et svært nyttig verktøy for denne typen boring. Den har en roterende ende, og er i stand til å holde bor fra 0,1 mm til 1,0 mm i diameter. Informasjonen er korrekt per 29. mai 2018. Spesifikasjoner kan endres uten varsel.

Tamiya 74112 Fine Pin Vise D-R 0.1-3.2mm Bitsholder for mikrobits og bor fra 0.1 til 3.2mm diameter, dette er ett presisjonsverktøy med gummi innlegg i håndtaket som gir nøyaktig og godt grep for brukeren.   The pin vise is an important tool in the armory of any modeler, allowing the making of precision holes for the purpose of modifying scale models. Compatible with drill bits of sizes from 0.1-3.2mm. Rotating grip end features built-in ball bearings for smooth movement. Made from nickel-plated brass, with elastomer grip. Features metallic sticker with the Tamiya twin star logo and wording “PIN VISE”. The rubber grip is engraved with the wording “TAMIYA”.

Tamiya 74151 Mini 4WD Curved Scissors (for Polycarbonate Bodies) Liten lexansaks for klipping av små detaljer i lexan og andre myke plasttyper. ★These scissors are for use cutting out curved sections on Mini 4WD car polycarbonate bodies, their short stainless steel blades providing long-lasting, quality curved cuts on lightly- and sharply-curved sections alike, as well as difficult-to-access spots. ★They are activated by pushing the grips together, for minimum interference from hands in the cutting process. ★Total length: 115mm, blade length: 12mm. ★Includes protective cap to cover the blades when not in use. Example of use

Maskeringstape Tamiya på dispenser 6mm x 18meter

Tamiya 87031 - Maskeringstape 10mm x 18m med dispenser Tamiya Masking Tape 10mm Item No: 87031   ★Masking is an essential process for all modelers, and this thin, highly adhesive tape provides an excellent tool. ★Comes in its own dispenser with cutter to avoid rough edges. ★Width: 10mm. Specifications are subject to change without notice.

Maskeringstape Tamiya 18mm x 18m på dispenser

Tamiya 87033 - Maskeringstape 6mm Refill for 87030 Lengde: 6m Bredde:  6mm

Tamiya 87034 - Maskeringstape 10mm x 18m Refill for 87031 Lengde: 18m Bredde:  10mm Finishing Materials no.34 Tamiya Masking Tape Refill (10mm Width) Item No: 87034   ★Masking is an essential process for all modelers, and this thin, highly adhesive tape provides an excellent tool. ★Can be used in the dispenser from Item 87031. ★Width: 10mm.

Tamiya 87035 - Maskeringstape 18mm Refill for 87032 Lengde: 18m Bredde:  18mm

Tamiya 87042 - Maskeringstape 40mm BLÅ (18m) Lengde: 18m Bredde:  40mm ★Denne maskeringstapen fester seg godt til ujevne overflater og hindrer maling i å trenge gjennom. Den tåler dessuten tynner svært godt, noe som gjør den uunnværlig på modellbyggerens arbeidsbenk. Den er enkel å kutte og etterlater minimalt med limrester på saksbladene. Med en bredde på 40 mm egner den seg ypperlig til større flater, inkludert karosserier til radiostyrte biler. ★Lengde: 18 meter. Specifications are subject to change without notice.

Tamiya 87063 - Maskeringstape 40mm (18m) Lengde: 18m Bredde:  40mm ★Masking is an essential process for all modelers, and this thin, highly adhesive tape provides an excellent tool. ★Wider tape is great for use on large subjects such as polycarbonate R/C car bodies. ★Width: 40mmm, length: 18m. Specifications are subject to change without notice.

Tamiya 87203 - Masking Tape w/Plastic Sheeting 150mm Tamiya Finishing Materials Series no.203 Masking Tape w/Plastic Sheeting 150mm Item No: 87203   ★This handy combination of 15mm masking tape with opaque plastic sheet attached allows you to mask with precision, using the sheeting to cover large areas and saving time otherwise spent taping the whole area to be masked. ★The width of tape and sheeting combined is 150mm, perfect for use on 1/24 scale car models. This roll is 10m in length. ★Polyethylene sheeting offers good resistance to thinners and is actually a dual layer that can be cut to make it into a larger sheet. Information is current as of January 31, 2020. Specifications are subject to change without notice.

Tamiya 87206 - Maskeringstape 1mm (18m) Smal maskering/line tape for bl.a plastmodeller rull med 1mm x 18meter. ★This is dedicated masking tape developed for plastic models. ★Features superior adhesion, yet at only 0.08mm thick, it retains the flexibility to cover various non-flat surfaces. ★At just 1mm wide, it is perfect for use on car model windows, aircraft model canopies and on other fine jobs. ★Plates on either side of the tape help stop it losing shape or getting dust and dirt stuck to it. ★Plastic core ensures minimal dust is produced. ★Length: 18m, width: 1mm.   ★Left: PET plastic covers allow minimal dust. Reinforced side with PET plastic discs. ★Right: Useful masking tape for small and curved parts. Information is current as of October 14, 2020. Specifications are subject to change without notice.

Tamiya 87227 - Anti Slip Sticker 75x150mm (1) Dette anti-skli klistremerket er perfekt for en rekke oppgaver, fra å feste den på undersiden av en displaybase,  til å bruke den på verktøy – som på undersiden av kuttematter eller linjaler. Du kan til og med bruke den på spissene til pinsetter for bedre grep! Den kan kuttes til ønsket størrelse med saks. Spesifikasjoner Størrelse: 75mm x 150mm. Tykkelse: 0.5mm (uten filmen man tar av). Dobbeltsidig tape på baksiden sørger for at klistremerket sitter på plass. Bruksanvisning Sørg for at overflaten er fri for støv, fuktighet, olje og lignende. Klipp klistremerket til ønsket størrelse, fjern filmen på baksiden og fest det hvor du ønsker. Støvansamling kan påvirke anti-skli effekten. Sørg for å rengjøre området regelmessig. Bruk gjerne tape til å fjerne eventuelt støv o.l.   Examples of use Use as anti-slip pads on the underside of display bases. Stick onto a ruler to make sure it doesn't slip when you use it while cutting or drawing. Put onto tweezer tips for even better grip. Stick 2 sheets together on their adhesive sides for a double-sided anti-slip sheet, then add some abrasive paper on top and get sanding! Highly adhesive double-sided tape is used for the adhesive surface.

Team Raffee Co. Bronco XLT Gen2  1/10 Hard Body 313mm 1/10 hardplastkarosseri Bronco XLT med fine detaljer og inkludert tak grind Specification: Width: 245mm (9.6") Length: 518mm (20.4) Height: 200mm (7.8") (with Roof Rack) 166mm (6.5") (without Roof Rack) Wheelbase: 313mm (12.3") Arch-to-arch width: Front: 228mm (8.9") Rear: 225mm (8.8") Weight: 662 grams (painted with roof rack as pictured) Includes: 1/10 Molded ABS Plastic Hard Body Lexan Window Roof Rack Front & Rear Chrome Bumpers Front Chrome Grill Side Mirrors Windshield Wipers Light Lenses Light Buckets Decal Sheet Two 4mm spacers and two long screws are included for the front bumper mounting It does not come with an interior and requires painting and assembling.

Team Raffee Co. Comanche 1/10 Hard Body 313mm 1/10 hardplastkarosseri Comanche/Cherokee med fine detaljer og lakkert lexan interiør. Badass 1/10 Comanche RC scale hardbody is now released. It comes standard with a painted lexan interior and rubber fenders. The body packs many features. Includes: Comanche Hard Body 1/10 313mm (Cab and Bed included) Painted signal and tail lights Clear window Flexible plastic rubber fenders Decals Wipers & mirrors Interior (colored) Body mounts Hardware Instruction Manual The body is not RTR. Photos are for reference only.

UDI-1601-002 Karosseriklips Bøyd Små - (8) Små karosseriklips for 1/14-1/18 biler Total lengde med øye : 17.8mm Ø : 1mm For karosseristolper 4.5-6mm

WL1335G - Karosseri Blå/Grønn 1/14 for RSR Buggy 144001 (1) Lakkert,Hullet og Klippet karosseri og Spoiler/Vinge

WL1335R - Karosseri Rød/Sølv 1/14 for RSR Buggy 144001 (1) Lakkert,Hullet og Klippet karosseri og Spoiler/Vinge

WL1836 - Karosseri for Fierce 1/12 Buggy 124019  Komplett karosseri og Spoiler for Fierce 1/12

WL1843 - Karosseri for Habile 124018  Komplett karosseri med påmontert lys, reservehjul, spoiler mm.

WPT-0035 - Y-kobling-Paralell for JR til JR/JST Specification: Converts JR connector (Male) to JR connector (Female) or JST connector (Female/Esc side) Qty:1Pc Weight: 3g Length: - JR to JR: 3cm - JR to JST: 10cm

1/14 Arbeidslampe for 3mm Led (1) 1 stk arbeidslampe med festebrakett glass og beskytter. (leveres uten led) 1/10-1/14 Work Light Specifications: Stainless Steel ABS Plastic Injection Molding Laser Etching Total Length: 0.40in / 10.18mm Total Width: 0.33in / 8.48mm Total Height: 0.57in / 14.50mm Total Weight: 0.035oz / 1.0g   Shown installed on Tamiya 1/14 Scania Truck with Engine Cover for Tamiya 1/14 Scania (VVV-C0088) for example (Not Included)   Shown installed on RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) with 1/10 Tire Holder (D90/D110) (VVV-C0249) and Rear Ladder for Gelande II (D90/D110) (VVV-C0246) for example (Not Included) What’s Included: 1x 1/10-1/14 Work Light 1x Mount Plate 3x M1 x 6mm Cross Head Cap Screws (Black) 3x Regular M1.0 Nuts (Silver) Replacement Hardware: M1 x 6mm Cross Head Cap Screws (Black) Regular M1.0 Nuts (Silver) Optional Parts: 1/10-1/14 Work Lights (w/LED) (VVV-C0477) 1/10-1/14 Work Light (w/LED) (VVV-C0476) Notes: Fits RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) Fits Tamiya 1/14 Scania Truck To install, you will need to drill two 1mm mounting holes. Can be custom installed on any truck you desire.

13513 Carson Truck Horns and Rearview Mirrors Suitable for all Tamiya trucks. Content: 2 horns and 2 rearview mirrors

7412 - Traxxas Rally Ford Fiesta® ST Ulakkert med dekaler Ulakkert karosseri for Traxxas 1/10 Rally Lengde: 550mm Bredde Foran : 270mm (Målt midt i hjulbue) Bredde Bak   : 273mm (Målt midt i hjulbue) Høyde : 170mm Hjulbase: 320mm

PRO472-00 - 1981 Ford Bronco Clear Body 313mm Wheel base Tøfft ullakkert Ford Bronco karosseri for Crawlere med hjulbase 313mm Nødvendig tilbehør: PS lakk (lexan) og verktøy for klipping og hulling. This is a 1981 Ford® Bronco Clear Body. Pro-Line is pleased to announce the release of the 1981 Ford® Bronco body for 12.3” Scale Crawlers. Pro-Line has captured the overall essence of the Bronco and have now made it available in 1:10 scale format! Complete with detailed grill, headlights, body molding trim, and that overall distinct Bronco look, you scale classic truck enthusiasts will not want to be left behind. If you like even older style Broncos, check out Pro-Line’s 1973 Ford® Bronco! When you're looking to go back in time in automotive history, then check out Pro-Line's new 1981 Ford® Bronco body. Click Here for painting tips  Ford Motor Company Trademarks and Trade Dress used under license to Pro-Line. Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. FEATURES: Made from durable, genuine GE Lexan Fully Licensed 1981 Ford® Bronco Perfect proportions for 12.3” wheelbase Crawlers Paint then peel overspray film Includes highly detailed decal sheet Four step to Scale Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your rig Made in the USA, since 1982 – Read about Pro-Line Racing’s History   Included:   Clear 1981 Ford® Bronco body Window templates Detailed Decal sheet Paint-then-peel overspray film included   SPECS:   Length:   17.8" (452mm) Width:   6.5" (165mm) Height:   5.6" (142mm) Wheel Base:   12.5" (317mm)

PRO3483-00 - 1966 Chevrolet C-10 Clear Body (Cab + Bed) 313mm Wheel base Ulakkert og uklippet 1966 Chevrolet C-10 karosseri for Crawlere med hjulbase 313mm Nødvendig tilbehør: PS lakk (lexan) og verktøy for klipping og hulling. This is a 1966 Chevrolet® C-10™ Clear Body (Cab + Bed) for Rock Crawlers. Pro-Line has a brand new body for all of the Scale Crawler fans: a Licensed 1966 Chevrolet® C-10™ Cab and Bed for the SCX10 Trail Honcho! Now you can make your crawler look even more scale with a ‘66 C-10™ cab on the front and bed on the back. The 1966 C-10™ is a classic vintage truck and Pro-Line’s scaled down version has been carefully sculpted with realistic undercut detail that is only made possible with Pro-Line’s new molding technology. This allowed Pro-Line to faithfully recreate the ‘66 C-10™ down to the most stunning of details! Transform the look of your tuck with the realistic 1966 Chevrolet® C-10™ body from Pro-Line! Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. Click Here for painting tips FEATURES: Fully Licensed 1966 Chevrolet® C-10™ Looks Great fit for your SCX10 Trail Honcho Realistic undercut detail made possible by Pro-Line’s advanced molding technology Detailed Sticker Sheet and Window Masks Included Paint-then-peel Overspray film included Made with Crystal Clear Genuine GE Lexan® Four step to Race Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Decal your body (decal sheet included) 4.) Mount your new body onto your Truck and admire your work Made in the USA, since 1982 - Read about Pro-Line Racing's History   INCLUDED:   1966 Chevrolet® C-10™ Clear Body (Cab + Bed) Window Masks Decal Sheet   SPECS:   OVERALL:     Length:   19.63" (499mm) Width:   7.44" (189mm) Height:   5.88" (226mm) Wheel Base:   12.3" (312mm)       Cab:     Length:   11.69" (297mm) Width:   7.44" (189mm) Height:   5.88" (226mm)       Bed:     Length:   7.94" (202mm) Width:   7.44" (189mm) Height:   3.19" (81mm)    General Motors® trademarks used under license to Pro-Line.

PRO3499-00 - 1946 Dodge Power Wagon Clear Body 313mm Wheelbase Ulakkert og uklippet 1946 Dodge Power Wagon karosseri for Crawlere med hjulbase 313mm Nødvendig tilbehør: PS lakk (lexan) og verktøy for klipping og hulling. This is a 1946 Dodge Power Wagon Clear Body for Crawlers. Pro-Line is proud to introduce the 1946 Dodge Power Wagon body for Scale Crawlers! This First Gen Power Wagon body style comes as 2 pieces (Cab and Bed) for an ultra-realistic look that stays true to the original military inspired 4x4 truck that civilians could buy. The 1946 Power Wagon features a huge, menacing flat front grill with large flat panel style fender flares just like the real truck. The body includes textured rocker panels, realistic undercuts and separate round headlights designed to allow for real working LED lights, all of which complete the look of this iconic truck. Click Here for painting tips Dodge and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license by Pro-Line. ©2017 FCA US LLC. Please note: All bodies are sold in crystal clear lexan® and are painted for advertising purposes only. Please note: All bodies are sold in crystal clear Lexan® and are painted for advertising purposes only. FEATURES: Realistic 1946 Power Wagon Scale Crawler Body Separate Cab and Bed for ultra-realism Menacing Front Grill and Large Fender Flares Separate Round Headlights allow for LED’s Made with Crystal Clear Genuine GE Lexan® Four steps to Crawl Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your truck Made in the USA, since 1982 - Read about Pro-Line Racing's History   SPECS SPECS:   OVERALL:   Length: 18.6" (472mm) Width at Center: 5.75" (146mm) Width at Fenders: 9" (229mm) Height: 5.75" (146mm) Wheel Base: 12.3" (312mm)    CAB ONLY:   Length: 10.25" (260mm) Width (w/o fenders): 5.75" (146mm) Height: 5.75" (146mm)    BED ONLY:   Length: 8.375" (213mm) Width: 5.75" (146mm) Height: 2.75" (70mm)

PRO3499-18 - 1946 Dodge Power Wagon Black Body 313mm Wheelbase Lakkert sort og uklippet 1946 Dodge Power Wagon karosseri for Crawlere med hjulbase 313mm Nødvendig tilbehør: Verktøy for klipping og hulling. This is a 1946 Dodge Power Wagon Clear Body for Crawlers. Pro-Line is proud to introduce the 1946 Dodge Power Wagon body for Scale Crawlers! This First Gen Power Wagon body style comes as 2 pieces (Cab and Bed) for an ultra-realistic look that stays true to the original military inspired 4x4 truck that civilians could buy. The 1946 Power Wagon features a huge, menacing flat front grill with large flat panel style fender flares just like the real truck. The body includes textured rocker panels, realistic undercuts and separate round headlights designed to allow for real working LED lights, all of which complete the look of this iconic truck. Key Features Fits SCX10™, Ascender®, Element Enduro, and other 12.3" Wheelbase Crawlers Realistic 1946 Power Wagon Scale Crawler Body Separate Cab and Bed for Ultra-realism Separate Round Headlights Allow for LED's Made from Tough-Color Polycarbonate   In The Box (1) 1946 Dodge Power Wagon Tough-Color Black Body Cab & Bed (1) Screw (8) and Nut (8) Hardware (1) Detailed Headlight and Window Decal SheetSPECS SPECS:   OVERALL:   Length: 18.6" (472mm) Width at Center: 5.75" (146mm) Width at Fenders: 9" (229mm) Height: 5.75" (146mm) Wheel Base: 12.3" (312mm)    CAB ONLY:   Length: 10.25" (260mm) Width (w/o fenders): 5.75" (146mm) Height: 5.75" (146mm)    BED ONLY:   Length: 8.375" (213mm) Width: 5.75" (146mm) Height: 2.75" (70mm) This is sold as a black painted body. No vehicle chassis is included with this product.   Ram, Dodge, and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license by Pro-Line. ©2022 FCA US LLC.

PRO3525-00 - 1977 Dodge Ramcharger Clear Body for 12.3" (313mm) Wheelbase  Scale Crawlers (may require trimming) Ulakkert og uklippet 1977 Dodge Ramcharger karosseri for Crawlere med hjulbase 313mm Nødvendig tilbehør: PS lakk (lexan) og verktøy for klipping og hulling. This is a 1977 Dodge Ramcharger Clear Body for Crawlers. Pro-Line is proud to introduce one of the highest detailed polycarbonate bodies ever created by the Pro-Line R & D department: the 1977 Dodge Ramcharger body for Scale Crawlers! This fully-licensed body captures all the scale details of the legendary Dodge 4x4 and lets you, the builder, choose which body configuration (instructions) to finish off your 12.3" wheelbase rig. That’s right: Pro-Line has included all the elements needed for you to build your dream truck. Will you style your Ramcharger as the classic open-air Pick-up to show off the included highly detailed interior with add-on dashboard? Or will you use the included camper-shell to create that rugged 4x4 SUV style? Also, for the first time ever, Pro-Line's team of innovators are offering some Exclusive 3D BONUS Scale Parts, available for download, free of charge! Click the links below to grab 3D files to print-at-home on your 3D printer or send to an online print shop such as Shapeways and add even more scale detail to your Ramcharger: Spesifikasjoner  Overall Length:   20.25" (514mm) Width at doors:   8.5" (216mm) Width at fenders:   8.5" (216mm) Height:   6.25" (159mm) Wheelbase:   12.3" (312mm)       Camper Shell Length:   12.25" (311mm) Width:   7.75" (197mm) Height:   2.5" (64mm) Inkludert: 1977 Dodge Ramcharger Main Body 1977 Dodge Ramcharger Interior 1977 Dodge Ramcharger Dashboard 1977 Dodge Ramcharger Camper Shell Window Masks Decal Sheet Assembly Instructions The Ramcharger is molded in our durable .060" polycarbonate and comes with window masks, Paint-then-peel overspray film and fully-licensed decals to finish off the look. Raise the bar and get your own Pro-Line 1977 Dodge Ramcharger for your 12.3" Crawler now! This body is a multi pc body that may require modification and trimming. Please fit the body to your chassis prior to painting. Don't forget to submit your finished Pro-Line body to Reader's Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize! Dodge and related logos, vehicle model names and trade dress are trademarks of FCA US LLC and used under license by Pro-Line. ©2019 FCA US LLC. Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only. Click Here for painting tips  

Tamiya 51658 - Ford Escort MK II Rally1/10 Lexan Karosseri Ulakkert Klart lexan karosseri fra Tamiya for 1/10 biler med hjulbase 239mm. Leveres med lyktebrønner, dekaler og maskering til vinduene. Spesifikasjoner: Lengde : 390mm Bredde : 170mm over skjermbuer Bredde :  152mm på midten Hjulavstand : 239mm This is a complete spare part body set of the FORD Escort Mk.II Rally. It may be fitted on many of Tamiya’s M-Chassis platforms. • Lightweight, durable polycarbonate body. Light cases are separate parts, also crafted in polycarbonate. • Separate injection molded ABS parts (white) are included to recreate side mirrors, bumper and fog lamps. • Comes with marking stickers for decoration, and window masking stickers for use in the paint process. • Compatible with 239mm L wheelbase MF-01X cars.

2320086 -  Kabel klips 10x14mm (5) Kabelklips for å feste ledninger og diverse, med dobbeltsidig tape. Selvklebende klips for organisering av kabler. Fem klips i pakken.

2320126 - Tilhengerfeste klave i Metall 1:10 1:10 Tilhengerfeste laget av metall – universelt egnet for mange tilhengere. Kloa har M3 gjenger for montering på tilhenger. Fra produsenten:   1:10 Coupling claw made of metal – universally suitable for many trailers. The claw has a M3 thread for mounting on the trailer. We also offer the coupling head (item no. 2320127) to match the coupling claw. Features: Material: metal Total length: approx. 35mm Trailer threaded socket: M3 For ball head with diameter: 6mm Ball head not included in delivery Scope of delivery: Coupling claw with chain

2320127 - Tilhengerfeste i Metall 1:10 Universalt hengerfeste i 1:10 skala. Fra produsenten: 1:10 trailer coupling head made of metal – universally suitable for many vehicles such as SCX10 90046, Gen8 or TRX4. The mounting can be done differently with the extension or with the base plate directly on the bumper.

AXI230052 - Karosseri 1/10 SCX10 PRO Klar Lexan Klart 1/10 karosseri designet for bl.a SCX10 PRO chassiet, karosseriet kommer ferdig klipt og hullet, masker vinduer og lakker, fjern beskyttelsesplast og du er ferdig :-) Dekaler for lykter, grill, dørhåndtak, + Axial reklame. Spesifikasjoner: Lengde : 410mm Bredde : 168mm på midten, 136mm over forhjul, 148mm over bakhjul  Høyde : 100mm Hjulbase : 312mm Reel vekt uten lakk : 98gram

500907039 - 3 Kamre Runde Baklamper for Henger-Lastebil (2) 2 stk runde 3 kammer beklamper for 4 stk 1.8mm SMD led. Festes med  skrue i midten. Størrelse: Ø - 11.07mm Tykkelse: 5.2mm

500907052 - Carson Auxiliary Head Lamp (2)  2 headlights 2 with blue and 2 white glasses for mounting on a lamp bracket, in 1:14 scale

AX24251 - Axial NVS - Night Visions System The ultimate level in detail you can now add the NVS light system which features controls for headlights, tail lights, brake lights, and right/left turn signals, as well as some extra auxiliary lighting. • When going forward the headlights brighten, when the brakes are applied the brake lights will brighten • Turn left or right and the blinkers will signal your turn • The main control box is a nice compact size measuring 47x32x23mm ~ 1.8x 1.25x0.9” (Width x Depth x Height) • External on/off switch so you can mount it remotely to make it easier to reach • Separate on/off switch for auxiliary lighting mounted on main control box • Separate light connectors for up to 10 LED light strings • Additional/replacement LED light strings are available • Use Simple LED controller - AX24257 as an alternative   Includes the following LED light strings:      (1) Double LED light string for headlights (White LED)      (1) Double LED light string for brake lights (Red LED)      (2) Double LED light strings for turn signals (Orange LED)      (1) 5 LED light string for auxiliary lights (White LED) COMPATIBILITY PARTS GALLERY    

HPI-17540 - BMW M3 E30 Clear Body 200mm Klart lexankarosseri for 1/10 Touring/Driftebiler, leveres med dekaler. (Uklippet) ill.foto BMW M3 E30 er en av de mest kjente Touring Bilene fra 1980-tallet, etter å ha dominert løp i de berømte DTM- og BTCC-racingene serien, samt seire i utholdenhetsløp som 24 timersløp på Nürburgring. Den gategående BMW M3 inkludert aggressive modifikasjoner designet for racerbaneytelse som brede skjermer, bredere felger og dekk, en aerodynamisk pakke for downforce ved høye hastigheter, og en motor innstilt for mer hestekraft. Resultatet var en gatebil som ble proklamert som en av de Topp 10 beste sportsbiler på 80-tallet og nylig kåret som en av de "5 beste sjåførbiler gjennom tidene" av Automobile Magazine. HPI gjenskaper trofast BMW M3 E30 for 1/10 R/C-biler med dette 200 mm karosseri som passer til brede sedaner i skala 1/10 og har det vanlige HPI kvaliteten på detaljer. Inkludert med karosseriet er et forhåndskuttet klistremerkeark som inkluderer vinduslinjer, frontlykter, griller, baklys, offisielle logoer og mye mer, og gir touringbilen din ett realistisk ferdig produkt. Dette karosseriet er ulakkert slik at du kan lakkere den i favorittfargene dine. Den passer til 200 mm touringbiler og kan også brukes på 190 mm touringbiler med bruk av brede offsethjul. Oversprayfilm er inkludert, samt vinylvindusmasker for å lakkere raskt og enkelt. Et instruksjonsark er inkludert for dekaler, og kroppen har fordypningsmerker for karosseristolper. Photorealistic die-cut premium vinyl decals include window frames, headlights, tail lights and more, plus official logos! Front and rear light buckets Molded polycarbonate rear wing Overspray film and pre-cut vinyl window masks make painting fast and simple A decal instruction sheet is included for decal placement The body has dimple marks for body post drill locations Karosseriet har fordypningsmerker for plassering av karosseriestolper til Hpi bilene, men kan fint benyttes på andre merker ved å merke seg hvor hull skal være. Molded from clear polycarbonate plastic for durability and long life This is an officially licensed replica. Clear body (finished example shown) THIS PART FITS THE FOLLOWING KITS / PARTS: RTR NITRO RS4 3 EVO+ WITH 1967...OPT NITRO RS4 3 DRIFT WITH NISSAN...OPT RTR E10 with Porsche 911 TurboOPT RTR E10 with Porsche 911 Turbo...OPT Nitro RS4 RTR 3 Evo+ w/ Porsche 911OPT Sprint 2 Sport w/ Porsche 911 GT3...OPT Sprint 2 Flux w/ Porsche 911 GT3...OPT Nitro RS4 3 Evo+ 2.4GHz w/ Porsche...OPT Nitro RS4 3 Evo+ 2.4GHz w/ BMW M3OPT E10 Drift Falken Mustang GT RTROPT Sprint 2 Nissan GT-R R35OPT Sprint 2 1969 Chevrolet Camaro Z28OPT RTR Sprint 2 SportOPT Sprint 2 Drift 2010 Chevrolet...OPT Sprint 2 Drift Nissan 350ZOPT RTR Sprint 2 Flux w/ Porsche 911...OPT Sprint 2 Flux BMW M3 GT2OPT E10 DRIFT with Mazda RX-7 FD3S...OPT RTR E10 with Ford Mustang GT-ROPT Sprint 2 Falken Porsche 911OPT Sprint 2 Flux 2010 Chevrolet...OPT E10 Drift Nissan S13 Discount TireOPT Sprint 2 1969 Ford Mustang RTR-XOPT E10 2014 Ford MustangOPT E10 Drift Falken Tire 2013 Ford...OPT E10 Drift VGJR Ford Mustang...OPT NITRO 3 DRIFT RTR WITH DISCOUNT...OPT Nitro RS4 3 Evo+ 1969 Ford Mustang...OPT Sprint 2 Flux Ford Mustang GT-ROPT Sprint 2 Flux BMW M3 GTSOPT RS4 Sport 3 BMW M3 E30OPT RS4 Sport 3 Flux Falken Porsche...OPT RS4 Sport 3 Drift Subaru BRZOPT RS4 Sport 3 2015 Ford Mustang Spec...OPT RS4 SPORT 3 RTR KEN BLOCK 1965 FORDOPT RS4 SPORT 3 Creator EditionOPT E10 TOURING MICHELE ABBATE...OPT E10 DRIFT FAIL CREW NISSAN SKYLINE...OPT RS4 Sport 3 Drift Dai Yoshihara...OPT RS4 SPORT 3 DRIFT TEAM WORTHOUSE...OPT RS4 SPORT 3 FLUX FORD GT HERITAGE...OPT RS4 SPORT 3 1969 FORD MUSTANG...OPT

Tamiya 51543 Porsche 911 Carrera RSR Clear 1/10 Body Ulakket lexankarosseri fra Tamiya for 1/10 biler med 250-260mm hjulbase. Compatible with Tamiya TT-01, TT-01 Type-E and TT-02 chassis (short wheelbase) Molded polycarbonate construction ABS molded plastic side mirrors, black in color Stick sheet with body trim and sponsor logos SPECIFICATIONS Length: 445mm  Width: 190mm foran/200mm bak  Height: 106mm  Thickness: 1mm Wheelbase: 251mm INCLUDES Porsche Carrera 911 RSR Race Car Body, Side Mirrors, two Sticker Sheets, Window Mask, Hardware and Instructions

500907184 - SMD Led 1/14 PCB for Ekstralys 7.2V (2) Lyssterke Innsatser med SMD led for Carson ekstralys, ferdig loddet med ledning. Dim: 8.1x1mm (SMD led 1x1.9mm)

AX31569 - Tail Light Lens Jeep Wrangler CRC (Red) Lykteglass 5mm led bak til JW CRC We’ve upped the lighting game with these two-piece molded taillight housing; an inner piece that mounts to the inside of the body and an outer, red lens. LED lights can be fitted into the inner buckets to give your rig that rear red glow. Accepts 5mm bulbs (white or red)

Tamiya 11825147 1/10 Boble karosseri WB 239mm Ulakkert/Uklippet boblekarosseri med lang hjulbase for M chassis, leveres UTEN karosseridetaljer, dekaler og maskering. Ferdig hullet for karosseristolper. Spesifikasjoner: Lengde : 370mm Bredde : 168mm Høyde : 125mm Hjulbase : 239mm

Tamiya 19005486 1/10 Boble Støtfangere for 11825147-58650-58572 H-J Parts Body fittings for Boble karosseri- Støtfanger foran og bak, frontlykter, speil, skiltlys.

Tamiya 47323 M-05-06 Mazda MX-5 Light Weight 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for M-03-05-06-07-08 biler SPECIFICATIONS Length: 335mm  Width: 172mm over hjul  Height: 118mm Wheelbase: 225mm INCLUDES  This is a lightweight version of the Mazda MX-5 body parts set. (Item 51583) for the popular M-05 M-chassis platform. Made from 0.8mm polycarbonate as opposed to the standard 1.0mm, it will give your car a lower center of gravity, thereby improving its performance. • The lightweight polycarbonate body accurately recreates the sleek MX-5 form. • Comes with separate injection-molded side mirror parts. • Stickers to recreate U.S., Japan and Europe version cars, plus masking stickers included. • Compatible with M-05, M-05 PRO, M-05 Ver.II PRO, M-05 Ver.II R, M-06, M-07, and M-06 PRO chassis.

Tamiya 51583 M-05-06 Mazda MX-5 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for M-03-05-06-07-08 biler SPECIFICATIONS Length: 335mm  Width: 172mm over hjul  Height: 118mm Wheelbase: 225mm INCLUDES Dette er et sett med karosserideler i klar polykarbonat til Mazda MX-5. Den er laget av 1 mm tykt polykarbonat. Settet inkluderer maskering for vinduene og et klistremerkesett for å fullføre den kompakte sportsbilen. Det sporty karosseriet er gjenskapt nøyaktig i slitesterk polykarbonat. Sprøytestøpte sidespeildeler er inkludert. Klistremerker for å gjenskape bilen fra USA, Japan og resten av verden, pluss maskering er inkludert.

Tamiya 51617 M-05 Citroën 2CV  Rally 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for M-03-05 biler SPECIFICATIONS Length: 383mm  Width: 172mm over hjul  Height: 142mm Wheelbase: 239mm INCLUDES  Citroën 2CV  Rally 1/10 Clear Body Set , Body parts for Rally, Sticker Sheets, Window Mask, Bodypins (8) and Instructions This is a spare body parts set of the Tamiya Citroën 2CV. It is made out of 1.0mm polycarbonate, making it very durable for road or rally racing. • Polycarbonate body is paired with separate bumper and side mirror parts, plus depictions of a recovery ladder and attachment bracket. • Marking stickers, plus masking stickers for use when painting included. • Compatible with M-Chassis cars