RC-BILER OG DELER

HSP-20194 - Car Body - 1/10 Breaker

HSP-20195 - Car Body - 1/10 Breaker

HSP-20292 - Car Body - 1/10 Breaker

HSP-20293 - Car Body - 1/10 Breaker

HSP-20708 Battery Cover Batteriholder for HSP Breaker

HSP-20720 Centre Drive Joint - 164.5mm Mellomaksling for Breaker Buggy og SCT

INJORA - Skruesett Stainless Steel TRX-4M (9746X) INJORA M1.6 M2 M2.5 Grade 12.9 Stainless Steel Hex Screws Nuts Hardware Kit for 1/18 TRX4M (4M-15) Suit for: 1/18 RC Crawler TRX4M Note: This kit does not include the screws used in the stock diff covers Features: Screws are Made of high quality Grade 12.9 Stainless Steel Stainless Steel Screw Kits are far superior to the screws that come stock with your RC No more bent, rusted, or corroded screws Come with a box, easy to take and store Various sizes screws and parts meet your need Screw Kit Includes: 10* M1.6*7mm Screws 12* M1.6*12mm Screws 10* M2*4mm Screws 45* M2*6mm Screws 10* M2*8mm Screws 10* M2*12mm Screws   8* M2.5*8mm Screws 10* M2.5*10mm Screws 10* M2.5*12mm Screws 20* M2.5*14mm Screws 15* M2.5*18mm Screws   5* M2.5*21mm Screws   3* M3*6mm Flat head screws 20* M3*6mm Pins   8* M3*6mm Pins 10* M2.5 Nuts

INJORA 0.7" 37*14mm Cling On Tires for 1/30 SCX30 (T7022) (4) Note: Designed and tested exclusively with INJORA 0.7" wheels. Compatibility with wheels from other manufacturers is not guaranteed due to differences in design and tolerances. Compatible with INJORA Silicone Rubber Inserts: TI07-36-14 Features: Molded in the Super Soft & Sticky INJORA S5 Compound Aggressive tread pattern for strong forward bite Stepped center lugs improve climbing traction Open tread spacing helps shed dirt and debris Reinforced shoulder lugs increase side-hill stability Specifications: Part Number: T7022 Tire Compound: S5 Outer Diameter: 37mm Width: 14mm Weight (each): 3.3g Package List: 4 × 0.7" Cling On Tires

INJORA 0.7" 40*14mm XHX Pin Tires for 1/30 SCX30 (T7021) (4) Note: Designed and tested exclusively with INJORA 0.7" wheels! Compatibility with wheels from other manufacturers is not guaranteed due to differences in design and tolerances. Compatible with INJORA Silicone Rubber Inserts: TI07-40-14 Features: Molded in the Super Soft & Sticky INJORA S5 Compound Dense XHX-shaped pin tread pattern provides consistent grip across all contact points Evenly spaced micro pins bite into rock, concrete, dirt, and indoor crawling surfaces Multi-directional tread layout delivers predictable forward drive and lateral control Specifications: Part Number: T7021 Tire Compound: S5 Outer Diameter: 40mm Width: 14mm Weight (each): 3.3g Package List: 4 × 0.7" XHX Pin Tires

INJORA 0.7" 40*15mm Crawler Tires for 1/30 SCX30 (T7011) (4) Note: Designed and tested exclusively with INJORA 0.7" wheels. Compatibility with wheels from other manufacturers is not guaranteed due to differences in design and tolerances. Compatible with INJORA Silicone Rubber Inserts: TI07-40-14 Features: Molded in the Super Soft & Sticky INJORA S5 Compound Multi-block tread pattern provides solid grip on rocks and rough terrain Dense lug layout helps maintain traction during crawling Staggered center lugs improve grip on uneven surfaces Open tread spacing helps clear loose dirt and small debris Side lugs help maintain control during side-hill driving Specifications: Part Number: T7011 Tire Compound: S5 Outer Diameter: 40mm Width: 15mm Weight (each): 4.2g Package List: 4 × 0.7" Crawler Tires

INJORA 0.7" D19 Brass Beadlock Wheels for 1/30 SCX30 (W7007) INJORA D19 0.7" Brass Beadlock Wheels for 1/30 Axial SCX30 (W7007) Note: The color difference compared to other brass wheels is due to a passivation and sealing treatment applied to prevent oxidation. Designed and tested for use with INJORA tires. Compatibility with tires from other brands may vary due to differences in bead design and tolerances. Features: CNC-machined brass with passivated and sealed finish for oxidation resistance 15.1g per wheel helps keep your rig planted on climbs and sidehills -1.5mm offset slightly increases track width for added stability Multi-spoke design with smooth profile Includes Torx screwdriver for installation Specifications: Part Number: W7007 Series: D19 Series Material: Brass Offset: -1.5mm Outer Diameter: 19mm Width: 10.8mm Weight (per wheel): 15.1g Weight (per beadlock ring): 5.5g Package List: 4 × INJORA 0.7" Wheels 1 × Torx Screwdriver

INJORA 10T Pinion 0.4 mod for TRX4M 2204 Fat Viper Brushless Motor Only compatible with INJORA TRX4M 2204 Fat Viper Motor. Not compatible with INJORA SCX24 2204 Fat Viper Motor! Features: Made of stainless steel, durable in use Come with 2 stud screws and a 0.9mm hex key wrench Specifications: Material: Stainless Steel Motor Pinion: 0.4mod 10T For Motor Shaft Diameter: 2mm Length : 7.4mm

INJORA 11g Heavy Duty Brass Portal Steering Knuckle Cap C for Axial SCX10 III Capra 1.9 INJORA Heavy Duty Brass Portal Steering Knuckle Housing for 1:10 RC Crawler Car Axial SCX10 III AXI03007 Capra 1.9 Upgrade Parts Only compatible with SCX10 III AR45 portal axles: 1/10 SCX10 III Jeep JLU Wrangler AXI03007 1/10 SCX10 III Jeep JT Gladiator AXI03006 1/10 Axial Capra 1.9 UTB Note: Not compatible with 1/10 Axial SCX10 III Early Ford Bronco AXI03014! Features: 100% brand new and made of brass Replace the SCX10 III original plastic parts, increase balance and durability Specification: Material: Brass Weight: 11 gram each

INJORA 11T Pinion 0.4 mod for TRX4M 1721 Purple Viper Brushless Motor Only compatible with INJORA TRX4M 1721 Purple Viper Motor. Not compatible with INJORA SCX24 1721 Purple Viper Motor! Features: Made of stainless steel, durable in use Come with 2 stud screws and a 0.9mm hex key wrench Specifications: Material: Stainless Steel Motor Pinion: 0.4mod 11T For Motor Shaft Diameter: 2mm Length : 7.8mm

INJORA 148g Heavy Duty Brass Portal Steering Knuckle Set C for SCX10 III Capra 1.9 NJORA Heavy Duty Brass Portal Steering Knuckle Housing for 1:10 RC Crawler Car Axial SCX10 III AXI03007 Capra 1.9 Upgrade Parts Only compatible with SCX10 III AR45 portal axles: 1/10 SCX10 III Jeep JLU Wrangler AXI03007 1/10 SCX10 III Jeep JT Gladiator AXI03006 1/10 Axial Capra 1.9 UTB Note: Not compatible with 1/10 Axial SCX10 III Early Ford Bronco AXI03014! Features: 100% brand new and made of brass Replace the SCX10 III original plastic parts, increase balance and durability Specification: Material: Brass Weight: 148gram psc (2)

Injora 20T Servo Saver Metall for Arrma Grom (1) Oppgraderingsdel for Arrma Grom, komplett servosaver med styreoverføring. Kan også brukes på Grom Quake og Gorgon, da må original styreoverføring benyttes. INJORA Aluminum Servo Saver Set for Arrma Mojave, Typhon, Granite, Quake, Gorgon, Grom Losi Nascar (20T) Compatible with: 1/12 Losi Nascar 1/14 Typhon Grom 1/16 Mojave Grom 1/18 Granite Grom Note: Compatible with the MOJAVE GROM stock 20T servo. Need to use the transmitter to adjust and center this servo saver. Features: High precision CNC machined Made of lightweight aluminum Enhanced durability and performance for off-road driving Provides a professional and sleek look for your car   Specifications: Part Number: GROM-10BK Material: Aluminum Weight: 3.4g Package List: 1 * Servo Saver Set

INJORA 2PCS 14g/pcs Brass Rear Axle Counterweights for 1/18 TRX4M Passer ikke med Traxxas originale Beadlock og Alufelger. Only compatible with: 1/18 TRX4M rear axle INJORA Aluminium TRX4M rear axle Features: High precision CNC machined Etched with the INJORA logo 14g/pcs, add weight to the axle which lower the center of gravity, increase the stability Specifications: Part Number: 4M-30 Material: Brass Color: Black, Grey, Gold Quantity: 2PCS Weight: 14g/pcs (0.49oz) Package List: 2 * Brass Rear Axle Counterweights

INJORA 2pcs 38g Black Brass Diff Covers for 1/10 SCX10 PRO & SCX10 III AR45 INJORA 38g Black Coating Brass Axle Cover for 1/10 RC Crawler SCX10 PRO SCX10 III Upgrade Compatible with: 1/10 Axial SCX10 PRO 1/10 Axial SCX10 III AR45 Axles (Early Bronco) (Note: Not compatible with SCX10 III AR45P Portal Axles) Features: Made of brass High precision CNC machined Fit both front and rear axles 38g/pcs, create a counterweight effect The black hard coating with chamfered edges adds a bright touch to your car, to prevent corrosion also Replace the plastic stock diff covers Specifications: Material: Brass Quantity: 2pcs Weight: 38g/pcs (1.34oz) Package List: 2 * Black Coating Brass Axle Covers

INJORA 43g Brass Axle Mount Set Suspension Links Stand for TRX-4 INJORA Brass Axle Mount Set Suspension Links Stand for RC Crawler Car Traxxas TRX-4 Suit For: 1/10 RC Crawler Traxxas TRX-4 Features: Made of high quality metal CNC crafts, high precision and durability Replace the TRX4 original plastic parts 8227 Specification: Material: Brass Quantity: 4pcs Weight: 43g

INJORA 4PCS 12mm Heavy Brass Wheel Hex Hub Extenders for Axial SCX10 III Capra 1.9 UTB 12mm messinghexer for Axial SCX III og Capra, leveres med låseskrue i rustfritt og akselhylse i messing. INJORA 4PCS Heavier Brass Metal 12MM Wheel Hex Extended Adapter for RC Crawler Axial SCX10 III AXI03007 Capra 1.9 UTB AXI03004 Suit for1/10 RC Crawler: Axial SCX10 III Axial Capra 1.9 Unlimited Trail Buggy Features: Made of high quality brass, strong and good look, can add weight for your RC Car. Lower the center of gravity, has perfect performance in ensuring the best balance. This RC Hex Adapters extend the distance of the wheels and the slight increase in width and weight increase stability. Specifications: Material: Brass Quantity: 4pcs/set Hex Width: 12mm Total Weight: 24g, 31g, 38g Thickness: 6mm,  8mm, 10mm Package List: 1 * Set Brass Wheel Hex

INJORA 53mm Aluminum Oil Shocks for 1/18 TRX4M (4) 4 stk justerbare optionsdempere 53mm for bl.a TRX-4M bilene, dempere kommer uten olje. INJORA 53MM Threaded Shock Absorber Oil Damper for 1/18 RC Crawler TRX4M Upgrade Compatible with: 1/18 RC crawler TRX4M Recommended shock oil weight: 20-40wt Note: The shock oil is not included! Adjusting the nut ring to shorten the spring gives better rebound capability. Features: Two spring rates included (0.45 0.5mm) CNC machined Aluminum shock bodies Nylon Bottom Rod End Telescopic design for maximum travel Threaded shock bodies for quick pre-load adjustments Specifications: Part Number: 4M-24 Color: Black, Red, Grey Full Length: 60mm (2.36in) Extended Length (eye to eye): 53mm (2.09in) Compressed Size (eye to eye): 39mm (1.54in) Maximum Travel: 14mm (0.55in) Spring Length: 43mm(1.69in) Each Weight: 6g (0.21oz) Springs: Softer: Black, Wire diameter: 0.45mm Stiffer: Silver, Wire diameter: 0.5mm

INJORA 82g Heavy Duty Brass Portal Steering Knuckle Caps B for SCX10 III Capra 1.9 INJORA Heavy Duty Brass Portal Steering Knuckle Housing for 1:10 RC Crawler Car Axial SCX10 III AXI03007 Capra 1.9 Upgrade Parts Only compatible with SCX10 III AR45 portal axles: 1/10 SCX10 III Jeep JLU Wrangler AXI03007 1/10 SCX10 III Jeep JT Gladiator AXI03006 1/10 Axial Capra 1.9 UTB Note: Not compatible with 1/10 Axial SCX10 III Early Ford Bronco AXI03014! Features: 100% brand new and made of brass Replace the SCX10 III original plastic parts, increase balance and durability Specification: Material: Brass Weight: 82gram psc (2)

INJORA 8PCS Brass High Clearance Links Set for 1/18 TRX4M Defender-Bronco High Clearance Lenkearmsett for bl.a TRX-4M bilene INJORA 8PCS Brass High Clearance Links Set for 1/18 RC Crawler TRX4M Upgrade Parts (4M-20) Only Compatible with: 1/18 TRX4M Defender 1/18 TRX4M Bronco How to use spacers: You can use the little spacers to extend the upper links to change the angle of your drive shafts and give you a little more clearance. I recommend using 2 spacers on each upper link end. Features: Comes with some 1mm spacers so you can extend the links Bent links have higher clearance in climbing Plastic rod ends Brass links and pivot balls Etched with the INJORA logo Specifications: Part Number: 4M-20 Link Material: Brass Rod Material: Plastic Quantity: 8PCS Weight: 38g (1.34oz) Package List: 1 * High Clearance Links Set

INJORA Aluminum Shock Mounts Towers for 1/18 TRX4M Note: Please remove the bumpers first and then you can simply change the shock mounts without removing the wheels Only compatible with: 1/18 TRX4M Defender Features: These shock mounts can lift the body by up to approx 8.5 mm CNC machined, black anodized Numerous mounting locations Easy to adjust the shock absorbers for better suspension Specifications: Part Number: 4M-35 Material: Aluminum Color: Black Weight: 14g (0.49oz) Installation Tips: FL: Front Left FR: Front Right RL: Rear Left RR: Rear Right

SCX30-05BK INJORA Black Brass Steering Links for Axial SCX30 Features: CNC-machined brass for precise fit, strength, and corrosion resistance Adds weight to the front axle for improved climbing stability and overall vehicle control Simple, direct-replacement installation with no modifications required Black-coated brass finish provides a refined, premium aesthetic upgrade Includes a Torx screwdriver for installation Specifications: Part Number: SCX30-05BK Material: Brass Total Weight: 2.8g Package List: 2 × Steering Links 1 × Torx Screwdriver

INJORA Black Brass Upgrade Parts for 1/18 TRX4M Messingsett for TRX-4M Styrelink : INJORA 12g Brass Steering Link for 1/18 TRX4M (4M-06) Compatible with: 1/18 TRX4M Defender, Bronco, High Trail K10, High Trail F150 Note: The steering link is not compatible with extended axles! Features: Made from brass for increased strength The link features a high clearance bend to prevent front tires from rubbing on the steering link at maximum steering angle Eliminate flex and increase the steering precision of your TRX4M with this brass steering link Precision brass CNC machined Etched with the INJORA logo Enhanced design and durable in use C-Hub : INJORA 4g/pcs Brass Caster Blocks C Hub Carriers for 1/18 TRX4M (2) (4M-05) Note: the bushings must be placed between the C hub and the steering knuckle Compatible with: 1/18 TRX4M Defender, Bronco, High Trail K10, High Trail F150 Features: Made of brass material High precision CNC machined Easy to install and durable Increase the weight, make car more stable Svingarmer : INJORA 11g Brass Steering Blocks Knuckle for 1/18 RC Crawler TRX4M Upgrade Parts (4M-04) Compatible with: 1/18 TRX4M Defender, Bronco, High Trail K10, High Trail F150 Features： Made of brass material High precision CNC machined 11g/pcs, add weight for each side to improve anti-rollover stability and climbing capability Differensial lokk : INJORA 2PCS 11g Brass Front Rear Axle Cover for 1/18 RC Crawler Car TRX4M Upgrade Parts (4M-01) Compatible with: 1/18 TRX4M Defender, Bronco, High Trail K10, High Trail F150 Features: CNC machined brass Replace original plastic parts, easy to install 11g/pcs, add weight to the axle which lower the center of gravity, increase the stability Fit both front and rear axles

INJORA Black Hardened Steel Drive Shafts for 1/18 TRX-4M Forsterkede mellomakslinger for TRX-4M Bronco/Defender (Komplett foran/bak) INJORA Black Hardened Steel Drive Shafts with D-shaped Holes for 1/18 TRX4M (4M-50BK) Only Compatible with: 1/18 TRX4M Defender 1/18 TRX4M Bronco Features: These drive shafts are machined to be able to be in phase (correct phasing). D-Shaped holes and rounded rectangle holes offer tighter connection to transmission and axles Enhanced structure design for long-life durability Hardened steel materials construction Scale Joint and spline diameter size for realistic appearance Etched with the INJORA logo Specifications: Part Number: 4M-50BK Material: Hardened Steel Weight: 22g (0.78oz) Color: Silver Package List: 2 * Drive Shafts 4 * Screws

INJORA BUG18-18 Lexan Body for 1/18  INJORA TRX4M Universal Chassis Ferdig lakkert med interiør, beregnet på INJORA TRX-4M chassis, men kan nok modifiseres til å passe andre 1/18 crawlere. Note:  Not compatible with 1/18 TRX4M stock chassis! Only compatible with INJORA TRX4M Universal Chassis (4M-89, 4M-111) Front headlights are optional: cover with stickers if not installed, or drill and glue to mount light pods Features: Classic Bug styling inspired by iconic desert buggies, delivering a retro off-road look Made from Durable PC Material  Interior and Roll Cage Molded from Nylon Equipped with white headlights for illumination INJORA Detailed Scale Sticker The front of the body is secured with a magnetic mount, while the rear is fastened with R-clips for easy removal Brushless Motor Compatibility: Supports 1721/2204 brushless motors, no interior mods needed Specifications: Part Number: BUG18 Material: Polycarbonate, Nylon Color: Clear, Black, Purple, Orange, Burgundy Body Weight: 74g  Headlight Color: White Size: 219.3*103.8*69mm Wheelbase: 155mm Package List: 1* Body  1* Interior 1* Roll Cage 1* Front Bumper 2* Rock Sliders 1* Magnetic Body Mount 1* Headlights  2* R-clips 1* Sticker 1* Manuals

INJORA Hardened Steel Drive Shafts for 1/18TRX-4M Long Wheelbase Forsterkede mellomakslinger for TRX-4M High Trail (Komplett foran/bak) Compatible with: 1/18 RC Crawler TRX4M High Trail K10 F150  Features: Hardened steel materials, in phase design Enhanced structure design for long-life durability Scale Joint and spline diameter size for realistic appearance D-shaped and rounded rectangle holes design offer tighter connection to transmission and axles Specifications: Part Number: 4M-84BK Material: Hardened Steel Weight: 23g (0.81oz) Package List: 2 * Drive Shafts 4 * Screws

INJORA Heavy Duty Brass Portal Steering Knuckle Set B for Axial SCX10 III Capra 1.9 INJORA Heavy Duty Brass Portal Steering Knuckle Housing for 1:10 RC Crawler Car Axial SCX10 III AXI03007 Capra 1.9 Upgrade Parts Only compatible with SCX10 III AR45 portal axles: 1/10 SCX10 III Jeep JLU Wrangler AXI03007 1/10 SCX10 III Jeep JT Gladiator AXI03006 1/10 Axial Capra 1.9 UTB Note: Not compatible with 1/10 Axial SCX10 III Early Ford Bronco AXI03014! Features: 100% brand new and made of brass Replace the SCX10 III original plastic parts, increase balance and durability Specification: Material: Brass Weight: 63gram a 2pcs

INJORA High Torque N30 PRO NANO Servo with Servo Saver for 1/30 SCX30 INJORA N30 Pro Servo is a more powerful option for Axial SCX30 builds, designed with a stronger motor, faster response, and higher torque for heavier or more demanding setups. Features: CNC-machined aluminum servo case for added strength and durability Metal gear set built to handle higher steering loads Spring-loaded servo saver helps absorb impacts and protect the servo gears Built for heavier SCX30 builds that need stronger and faster steering than the standard N30 servo Specifications: Part Number: N30 PRO Motor Type: Brushed Coreless Gear Type: Metal Case Material: Aluminum Alloy Feedback Type: Potentiometer Operating Voltage: 5–6.0V Control Signal: PWM No-load Speed (6V): 0.045 sec/60° No-load Current (6V): 130mA   Stall Torque (6V): 4kgf·cm Stall Current (6V): 1740mA Operating Angle: 180° (500–2500 μsec) Dimensions: 15.8×12.85×21.98mm Wire Length: JR 115mm / 28AWG Weight: 7.7g Waterproof: No Package List: 1 × N30 Servo 1 × Servo Saver  

INJORA IR60-18 Body for 1/18 TRX4M Defender-Bronco INJORA IR60-18 Pickup Hard Body Shell with Bed Rack for 1/18 RC Crawler TRX4M Defender Bronco Upgrade Only compatible with: Stock TRX4M Defender & Bronco chassis  INJORA Universal TRX4M chassis Features:  ABS pickup hard body with rear bed rack. Come with two styles of front grille. Rubber rearview mirrors for better durability. Four screws, endless possibilities. Attach the body shell to the chassis with just a twist. Easy as that! Front Clipless Mounting design and Rear hook-and-loop hinge design. Its hook-and-loop hinge design lets you reach the chassis and battery quickly by simply swinging the body up. Suit for your TRX4M Bronco and Defender chassis and you're ready for fun and adventure! Specifications: Part Number: IR60 Material: ABS Plastic Color: Pearl White, Black, Grey, Green, Purple, Blue White, Red White, Chrome Weight: 78g (0.172lb) Wheelbase: 155mm (6.10in) Size: 225*90*67mm (8.86*3.54*2.64in) Required tools：1* 0.05" hex screwdriver (1.27mm or 1.3mm is also fine) Package List: 1* IR60-18 Body Kit 1* Front & Rear Led Light 1* Body Assembly Manual You may need: 3D printing file of the truck bed

INJORA LS 59mm Aluminum Oil Shocks for 1/18 TRX4M (4) 4 stk justerbare optionsdempere 59mm for bl.a TRX-4M bilene, dempere kommer uten olje. INJORA LS(Lower Spring) 59mm Aluminum Oil Shocks for 1/18 TRX4M Note:  The shock oil is not included. Add preload using the threaded collar for stronger rebound. Features: CNC-machined aluminum construction Two spring rates included Lower spring layout for improved CG and reduced chassis interference Threaded shock bodies with interchangeable gold and black preload collars Shock Specifications: Part Number: 4M-122 Product Series：LS Shocks (Lower Spring) Color: Black / Silver Full Length: 65mm Extended Length (eye-to-eye): 59mm Compressed Length (eye-to-eye): 42mm Weight (each): 5.0g Spring Specifications: Inner Diameter: 8.5mm Free Length: 26mm Total Coils: 10 Wire Diameter: 0.45mm (Green Mark), 0.5mm (Purple Mark) Package List: 4 × Shocks 4 × Extra Springs

INJORA Overdrive 9% 22/12T Alloy Steel Helical Gears for 1/18 TRX4M 1 drevsett for 1 aksel, 9% overrgiring Compatible with: 1/18 TRX4M stock axles INJORA TRX4M axles Note: Each axle requires 1 set of gears (a ring gear and a pinion gear). Overdrive the front(or underdrive the rear) will pull you faster in the front, it allows you to climb better and reduce rollover. Do not swap gears from different gear sets! They are different even if they have the same number of tooth. If you have some free play between gears, you can add a shim or 2 between pinion gear and bearing to push pinion teeth deeper into ring gear teeth. 22T/12T Overdrive Gears: Increase speed approx 9% Features: Replace the stock plastic gears, fit TRX4M front or rear axles Helical gears offer greater strength and smooth operation than the factory spur gears Less vibration, less noise, less wear then stock gears CNC machined 20CrMo Alloy Steel Gears Specifications: Material: 20CrMo Alloy Steel Weight: about 7g/set

INJORA Roverin M30 G2 FOC Sensored Brushless ESC & Motor for 1/18 TRX4M INJORA Roverin M30 G2 FOC Sensored Brushless ESC & Motor Combo for 1/18 TRX4M Ascent-18 Brushed(4800KV) What's New in G2? The Roverin M30 G2 features essential hardware upgrades to improve reliability and thermal performance: 1. Enhanced Heat Management: Optimized ESC circuitry to effectively reduce operating temperatures. 2. Refined ESC Outlets: Redesigned wire exits to prevent accidental short circuits. 3. Upgraded Motor Leads: Reinforced motor wiring with superior high-temperature resistance. Note:  Compatible with: Traxxas TRX4M, Ascent-18 Brushed Transmission: compatible with stock TRX4M transmission and INJORA TRX4M metal transmission (It desn't fit 370 transmission), stock Redcat Ascent18 transmission, INJORA Ascent18 metal transmission. Radio system: Not compatible with the stock TRX4M radio. Requires a new transmitter and receiver (with CH2). Battery: compatible with 2S and 3S batteries The BEC supports up to 10V output for low-current applications only (e.g., powering receivers or sensors). For high-current servos, we recommend using 6V–7.4V for reliable and safe operation. Features: Wireless Bluetooth & Smart App Tuning: Built-in Bluetooth for easy adjustments—no extra devices needed! Enjoy real-time tuning, data logging, and firmware updates via the INJORA Link app. (iOS: Download from the App Store; Android: Get it on Google Play.) Powerful Low-Speed Torque & Smooth Operation: The FOC algorithm ensures precise power control, delivering strong torque even at extremely low speeds for smooth and responsive driving. Adjustable Drag Brake (Up to 200%): Enhanced climbing and speed control. Improved efficiency and reduced noise. Twice the braking power of standard brushless systems, ensuring superior downhill control. Smart Magnetic Encoder Motor: Stable three-phase signal output for precise control. Accurate sensor feedback eliminates jitter and enhances smooth acceleration. IP67 Waterproof & Dustproof: Fully protected against water, mud, dust, and snow, ensuring durability in extreme environments. Comprehensive Protection System: Low Voltage Protection, Overheat Protection, Overvoltage Protection, Overcurrent Protection, Phase Loss Protection, Throttle Signal Loss Protection, Motor Disconnection Protection ESC Specification: ESC Type: FOC Brushless ESC (FOC-M30) Continuous Current: 30A Peak Current: 100A Battery Support: 2-3S LiPo BEC Output: 0-10V adjustable, 5A continuous, 10A peak Size: 35.5×16.3×16.3mm Weight: 25g Waterproof: Yes Motor Specification: Motor Type: Brushless Sensored 180 Motor Motor KV: 4800KV At no-load(7.4V): RPM: 35000 ±10%  Current: <0.9A At load(7.4V): RPM: 31000 ±10%  Current: 3.0A     Battery Support: 2-3S LiPo Size: 42.7×18×20.5mm Weight: 36.5g Motor Pinion: 0.4mod 11T Waterproof: Yes Package List: 1 × ESC 1 × Motor 1 × Battery Adapter Cable (Female XT30 to Male TRX-4M) 1 × Battery Adapter Cable (Female XT30 to Male JST-RCY) 1 × Battery Adapter Cable (Female XT30 to Male JST-PH2.0) 1 × User Manual

SCX30-13FR INJORA Stainless Steel Axle Shafts for Axial SCX30 Features: Stainless steel construction for improved wear resistance and durability Upgraded front axle U-joint design to replace the stock dogbone-style axle shafts Extended axle shaft threads by 1 mm allow the installation of wider wheels Direct fit for stock SCX30 axles with no modifications required Specifications: Part Number: SCX30-13 Material: Stainless Steel Front Shafts Weight: 3g Rear Shafts Weight: 2.7g  

INJORA Underdrive 16.67% 24/10T Alloy Steel Helical Gears for 1/18 TRX4M 1 drevsett for 1 aksel, 16.67% Undergiring Compatible with: 1/18 TRX4M stock axles INJORA TRX4M axles Note: Each axle requires 1 set of gears (a ring gear and a pinion gear). Overdrive the front(or underdrive the rear) will pull you faster in the front, it allows you to climb better and reduce rollover. Do not swap gears from different gear sets! They are different even if they have the same number of tooth. If you have some free play between gears, you can add a shim or 2 between pinion gear and bearing to push pinion teeth deeper into ring gear teeth. 24T/10T Underdrive Gears: Decrease speed approx 16.67% Features: Replace the stock plastic gears, fit TRX4M front or rear axles Helical gears offer greater strength and smooth operation than the factory spur gears Less vibration, less noise, less wear then stock gears CNC machined 20CrMo Alloy Steel Gears Specifications: Material: 20CrMo Alloy Steel Weight: about 7g/set

INJORA Underdrive 32% Stainless Steel Transmission Gear Set for 1/18 TRX4M  Drevsats i metall for TRX-4M komplett sett 24.4:1 reduksjon INJORA Stainless Steel 24.3:1 Low Range Transmission Gear Pinion Set for 1/18 RC Crawler Car TRX4M Upgrade (4M-36) Note: Don't forget to grease the gears!!! These gear sets have the same pinions as the ones on our 180 motors. Compatible with: 1/18 TRX4M, also compatible with INJORA 370 transmission Features: 40.3:1 Underdrive Gear Set: Decrease speed approx 59% 16.61:1 Gear Set: As stock, do no change speed 9.7:1 Overdrive Gear Set: Increase speed approx 71% 24.4:1 Underdrive Gear Set: Decrease speed approx 32% CNC machined Made of high quality stainless steel Ultra-low 40.3:1 reduction ratio for maximum rock-climbing power and unstoppable torque Includes all transmission gears and a 11-tooth motor pinion Specifications: Part Number: 4M-36 Material: Stainless Steel Reduction Ratio: 40.3:1, 16.61:1, 9.7:1, 24.4:1 Motor Pinion: 11T Weight: 15g (0.53oz) Package List: 1 Set Transmission Gears

INJORA Underdrive 59% Stainless Steel Transmission Gear Set for 1/18 TRX4M (9776R) Drevsats i metall for TRX-4M komplett sett 40.3:1 reduksjon INJORA Stainless Steel 40.3:1 Low Range Transmission Gear Pinion Set for 1/18 RC Crawler Car TRX4M Upgrade (4M-36) Note: Don't forget to grease the gears!!! These gear sets have the same pinions as the ones on our 180 motors. Compatible with: 1/18 TRX4M, also compatible with INJORA 370 transmission Features: 40.3:1 Underdrive Gear Set: Decrease speed approx 59% 16.61:1 Gear Set: As stock, do no change speed 9.7:1 Overdrive Gear Set: Increase speed approx 71% 24.4:1 Underdrive Gear Set: Decrease speed approx 32% CNC machined Made of high quality stainless steel Ultra-low 40.3:1 reduction ratio for maximum rock-climbing power and unstoppable torque Includes all transmission gears and a 11-tooth motor pinion Specifications: Part Number: 4M-36 Material: Stainless Steel Reduction Ratio: 40.3:1, 16.61:1, 9.7:1, 24.4:1 Motor Pinion: 11T Weight: 15g (0.53oz) Package List: 1 Set Transmission Gears

INJORA Underdrive 8/33T Steel Helical Gears for SCX10 II SCX10 III SCX10 Pro Undergiring 11% INJORA 11% Underdrive Steel Helical Axle Gears For 1/10 RC Crawler SCX10 II 90046 SCX10 III SCX10 Pro Only compatible with stock Axial axles AR44-AR45 + PRO: SCX10 II, SCX10 III, SCX10 Pro Features 8T/33T Gears: decrease speed approx 11% Upgrade hardened steel material Helical gears designed for better transmission Specifications: Material: Steel Underdrive Gears: 8/33T Weight: 28g (0.99oz) Package List: 1 Set Axle Gear

Jeti SP 06 Opto Killswitch  Jeti SP 06 Opto Killswitch er en optisk isolert av/på bryter fra Jeti. Denne enheten er dermed godt egnet for tenningsannlegg og andre tilleggsystemer som du vil enten slå av eller på via håndkontroll. Vekt 9g Størrelse 27mm x 15mm x 5mm Telemetri Nei Driftstemperatur -20 - 85°C Anbefalt inngangsspenning 3,5V - 16V Nominell strøm 6A Maks strøm(30sek) 10A Maks inngangsspenning 16V The switch SP 06 opto has been specifically designed for switching purposes of auxiliary functions, such as on board glow plug heating systems and miscellaneous lighting systems etc. in model airplanes, model ships, and model cars. The switched loads can be of ohmic, inductive or capacitive character. The switching moment is signalled by a LED.  

K1 Hobbyskalpell med Sikkerhetshette Assorterte (EX77K01) 1stk BULKVARE 5/16" x 4 3/4" L with 4 jaw machined aluminum chuck for secure blade positioning. Includes Super Sharp Blade and a snug fitting safety cap or scabbard for your protection. Used for precision cutting, trimming, and stripping of paper, plastic, wood, cloth, and film.   SPECIFICATIONS Length: 4-3/4" (12.1cm) Diameter: 5/16" (0.8cm)

K1 Rund Hobbyskalpell med Sikkerhetshette (1) EXCEL K1 ALUMINIUMSKNIV Allsidig hobbykniv i aluminium med ett #11 blad. Perfekt for presisjonsskjæring, trimming og stripping av papir, plast, tre, tøy og film. Lett og solid håndtak passer til alle standard håndverksknivblader med 5.8mm bredde, inkludert Xacto Knife. Inkluderer 4 kjever aluminiumschuck for sikrere bladplassering og mere hold enn din standard lette kniv; med en tettsittende, vrilås sikkerhetshette for å beskytte bladet under lagring Perfekt verktøy for hobby og kunst og håndverk – scrapbooking, modellsett, papirhåndverk, med et strukturert håndtak for maksimal kontroll og stabilitet SPECIFICATIONS Length: 4-3/4" (12.1cm) Diameter: 5/16" (0.8cm)

K2 Excel #22 Curved Edge Blade Large (5) Reserveblad rund for K2 Excel Hobbykniv FEATURES Steel construction Used for curved cutting of plastic and wood Packaged in clear plastic tube for safety   INCLUDES Five #22 Curved Edge Blades Clear Plastic Tube   SPECIFICATIONS Length of Cutting Area: 1" (25.4mm) Total Length: 1.81" (46mm)

K2 Excel #23 Curved Dobbeltsidig Knivblad (5) Reserveblad Dobbeltsidig for K2,K5,K6 Excel Hobbykniv   FEATURES Steel construction Used for curved cutting of plastic and wood Packaged in clear plastic tube for safety   INCLUDES Five #22 Curved Edge Blades Clear Plastic Tube   SPECIFICATIONS Length of Cutting Area: 1" (25.4mm) Total Length: 1.81" (46mm) For cutting rubber, foam, wood and plastic Size: 1 13/16" x 3/8" x 1" Edge Fits: K2, K5, K6

K2 Excel Knivblad 55mm Sag (5) Reserveblad sag for K2 Excel Hobbykniv Narrow sawblade for smooth cutting of wood, plastic and foam in narrow areas. 55 mm long blade. Fits: K2 / K5 / K6 handles.   5 sawblades.  

K2 Excel Knivblad 60.45mm Sagblad (5) Reserveblad sag for K2,K5 og K6 Excel Hobbykniv Narrow sawblade for smooth cutting of wood, plastic and foam in narrow areas. 60,45 mm long blade. High quality classic #27 hobby saw blades, 100% Made in the USA and engineered for heavy duty cutting of wood, plastic, foam, linoleum, rubber and more with ultimate precision. Versatile replacement blades fit all standard medium to heavy duty craft knives including Xacto Knife Perfect for tool for graphic artists, designers and arts and crafts applications – wood carving, scrapbooking, model kits, and more Includes a pack of (5) #27 saw blades with 2.38 x 2.25 inch edge  

K2 Excel Knivblad Rett Spiss (5) Reserveblad rett spiss for K2/K5/K6 Excel Hobbykniv   Fits: K2 / K5 / K6 handles.   5 knivblader.  

K1 Hobbyskalpell med SikkerhetshetteK2 Hobbyskalpell Rund Medium  med Sikkerhetshette5/16" x 4 3/4" L with 4 jaw machined aluminum chuck for secure blade positioning. Includes Super Sharp Blade and a snug fitting safety cap or scabbard for your protection. Used for precision cutting, trimming, and stripping of paper, plastic, wood, cloth, and film.   FEATURES 7/16" x 4-3/4" knurled aluminum handle. 4-jaw machined aluminum chuck for secure blade positioning. Includes one super sharp #24 blade. Snug fitting plastic safety cap. Used for precision cutting, trimming and stripping of paper, plastic, wood, cloth and film. Carded packaging.   INCLUDES One Medium Duty Knife with Cap.   SPECIFICATIONS Length: 4-3/4" (12.1cm) Diameter: 7/16" (1.1cm)

K989-39 - Øvre Bære Arm Sett Desert Buggy (284010) 1 sett med øvre bære/svingarmer for 1/28 Desert Buggy

K989-41 - Servo Linker Force Mini Drift/ Desert Buggy  Servolinker for Force Mini Drift (284131) og Desert Buggy (284161)

Kaiser XS Center Drive Shaft Set (2) 2 stk komplette mellomakslinger for Kaiser XS

Kaiser XS Drive Shaft Joint  (4)

Kaiser XS Front Drive Shaft  (2)

Kaiser XS Spur Gear 56T 

Kaiser XS Spur Gear Shaft Pin 2x7.8mm  (2)

Karosseri Big Rock Crew Cab 1/10 Lakkert BIG ROCK Lakkert med dekaler, klippet Body, ferdig lakkert er den perfekte erstatningen.   Svart matt :  Lenke til produsent  Grønn : Lenke til Produsent Blått : Lenke til produsent    

Karosseri for 1/10 QUAKE 2WD Blankt med Dekaler og Maskering QUAKE Ulakkert, med dekaler og maskering, ferdig klipt/tilpasset karosseri er den perfekte erstatningen for 1/10 Quake 2WD. Høykvalitets støpt karosseri, Tøff grafikk og  merket med ARRMA-vinylklistremerker som gir stilige uttrykk. Forhåndstrimmet og boret for rask og enkel installasjon, uten fester.

Karosseri for 1/10 QUAKE 2WD Komplett Lakkert QUAKE Lakkert og med Dekaler, ferdig klipt/tilpasset karosseri er den perfekte erstatningen for 1/10 Quake 2WD. Høykvalitets støpt karosseri, Tøff grafikk og  merket med ARRMA-vinylklistremerker som gir stilige uttrykk. Forhåndstrimmet og boret for rask og enkel installasjon.

Kjede 70 ruller Promoto MX (1) (LOS262000) Kjede til Promoto MX 

L4 LED Super Bright Lyssett 3.6-8.4V (1S-2S Lipo) Lyssett med 4stk kraftige super bright LED. Specifications: Brand name: G.T.POWER Input voltage: 3.6V-8.4V Max current rate: Max 130mA LED Housing diameter: 10mm / 6mm Package Information: Package size: 9 * 6.7 * 3cm / 3.6 * 2.6 * 0.4in Package weight: 52g / 1.8oz Package List: 2 * Φ10mm White LED Light 2 * Φ6mm White LED Light

L8 LED Super Bright Lyssett 3.6-8.4V (1S-2S Lipo) (GTP100) Lyssett med 8stk kraftige super bright LED. Key Features Input Voltage DC 3.6V – 8.4V Max Current 220mA What’s in the Box 2x 10mm White LEDs with 350mm lead 2x 10mm Red LEDs with 350mm lead 2x 6mm White LEDs with 350mm lead 2x 6mm Red LEDs with 350mm lead 1x Receiver lead 280mm long For Power

Lexan Karosseri for Rustler 4x4 Lakkert og Montert (Komplett) 1/10 Tilpasset og klippet lakkert lexankarosseri for 1/10 Stadiumtruck. Leveres med vindumaskering og dekaler. Lengde: 430mm Bredde: 140mm Hjulbase: ca 290mm Accessory part for these models: Rustler® 4X4 VXL Rustler® 4X4

Lexan M-Style Plate 0.75x415x683mm (1) Lexan-plater til RC og modellbygging. Sterk, fleksibel og lett å arbeide med. Er du entusiast innen radiostyrt bil, skalamodeller, rc-fly eller annen form for modellbygging, så vet du hvor viktig riktig materiale er. Her er Lexan i en klasse for seg. Lexan er en type slagfast polykarbonat som kombinerer høy gjennomsiktighet med ekstrem holdbarhet og fleksibilitet. I tykkelser på 0.75 og 1mm er det ideelt for hobbybruk hvor presisjon, lav vekt og styrke er i foksu. Tynne lexan-plater gir deg den perfekte balanse mellom styrke og fleksibilitet. Uansett om du bygger fra bunden, omtimaliserer eksisterende modeller eller reparerer skader. Det er et materiale som kan formes med dine ideer og ambisjoner, både til daglig bruk og til avanserte prosjekter. Allsidig Lexan er supersolid, slagfast og robust. Perfekt til krevende prosjekter. Samtidig er det lett å arbeide med, og det skan skjæres med hobbykniv, klippes med saks og formes med varme. I tillegg til at det er lett å arbeide med, så har Lexan lav vekt og det er gjennomsiktig. Bruk det som klare deler, eller lakker det med lexan-spray for et unikt uttrykk.

Lexan M-Style Plate 1x415x683mm (1) Lexan-plater til RC og modellbygging. Sterk, fleksibel og lett å arbeide med. Er du entusiast innen radiostyrt bil, skalamodeller, rc-fly eller annen form for modellbygging, så vet du hvor viktig riktig materiale er. Her er Lexan i en klasse for seg. Lexan er en type slagfast polykarbonat som kombinerer høy gjennomsiktighet med ekstrem holdbarhet og fleksibilitet. I tykkelser på 0.75 og 1mm er det ideelt for hobbybruk hvor presisjon, lav vekt og styrke er i foksu. Tynne lexan-plater gir deg den perfekte balanse mellom styrke og fleksibilitet. Uansett om du bygger fra bunden, omtimaliserer eksisterende modeller eller reparerer skader. Det er et materiale som kan formes med dine ideer og ambisjoner, både til daglig bruk og til avanserte prosjekter. Allsidig Lexan er supersolid, slagfast og robust. Perfekt til krevende prosjekter. Samtidig er det lett å arbeide med, og det skan skjæres med hobbykniv, klippes med saks og formes med varme. I tillegg til at det er lett å arbeide med, så har Lexan lav vekt og det er gjennomsiktig. Bruk det som klare deler, eller lakker det med lexan-spray for et unikt uttrykk.

Liquid Mask - BittyDesign - 16oz/473ml (0.5kg) Flytende maskering, Lag dine egne tilpassede design med flytende maskering. Det fungerer bra på innsiden av lexan og på lastebil hytter, etc. Bruk en 1/2 "bred pensel eller airbrush med stor dyse og legg på ett tykkt jevnt lag. La det tørke eller bruke hårføner/varmluft for å fremskynde tørketiden og gjenta for en fin "hud", tykk nok til at det går fint å skjære gjennom med en hobbykniv og skrelle bort overskytende før maling/lakkering. Fasmask tørker klart slik at du kan markere ditt design på utsiden av gjennomsiktig karosserier og skjær til fasmasken på innsiden. Ikke kutt for dypt så du ødelegger karosseriet. Man kan også bruke en mindre pensel for å masker små, spesifikke områder som vinduer, støtfangere og grafikk. det gjennomsnittlige RC karosseriet krever 2-3 unser. Fasmask kan også brukes til å maskere andre elementer som modell biler, hjelmer, etc.

LK-0001WT - Led Kit Ultra Bright 6 stk 5mm Led  Lyssett som tilkobles til 6.0V, leveres med tilkoblingskabel for mange tilkoblingmuligheter.   For: Crawler, 1/10 EP 4 Foran 5 mm hvit LED 2 Bak 5 mm rød LED For 6V bruk Inkluderer: LED-kabel (1 stk) Tilkoblingskabler (2 stk) LED-fester (6 stk)  

LOS-1761 - Bulkhead, Pin Mounts, Steering Rack, Servo Saver: Micro-B/T Dette Bulkhead, Pin Mounts, Steering Rack og Servo Saver-settet for Losi Micro-B/T inkluderer bellcranks, rack, servo saver, frontbulkhead, bakre hengselstiftfester, skruer, rack-bushinger, fjær og servo saver screw. Kompositter av høy kvalitet.

LOS-1765 - Shock Set, Assembled: Micro-B/T (4) This Shock Set for the Losi Micro-B includes 2 front and 2 rear shocks fully built with 20 wt oil and mounting screws.

LOS-1767 - Link Set: Micro-B/T This Link Set for the Losi Micro-B includes 4 turnbuckle links, 2 steering links, and 1 servo link that are made of high quality composites. Each single piece is easy to snap in place.

LOS-1768 - Arms, Hubs: Micro-B/T Dette settet inneholder bærebruer, svingarmer, C-hub, kuler, monteringsskruer for Losi Micro-B/T. 

LOS-1770 - Støtdempertårn Foran og Bak, Støtfanger: Micro-B/T Støtdempertårn F/B, Støtfanger Foran, skruesett og kulelinker.

LOS-1771 - Klart Lexan Karosseri & Vinge Micro-B This Clear Body & Wing Set for the Losi Micro-B includes a rear wing, body, factory sticker sheets, hook, and loop. In The Box (1) Clear Body with Rear Wing (1) Set of Factory Sticker Sheets Hook and Loop

LOS-1870 - 65T Motor for Micro - B/T Denne 65T erstatningsmotoren for Losi Micro-B/T kommer med installert ledninger og kontakt. Plast pinion medfølger.

LOS211012 - Servo Mount Servo Saver: Mini-T 2.0, Mini-B

LOS214017 - Støtdemperfjærer 3 par Bak Mini-T-B 3 par støtdemperfjærer for bl.a Losi Mini-T-B Spesifikasjoner: 2 stk - Silver Springs – Soft (0.81 lb/in)  (10mm Ø innvendig, 38mm Lengde) 2 stk - Black Springs – Medium (1.34 lb/in)  (10mm Ø innvendig, 35.5mm Lengde) 2 stk - Gold Springs – Hard (1.93 lb/in)  (10mm Ø innvendig, 35.6mm Lengde)

LOS214018 - Støtdemperfjærer 3 par Front Mini-B 3 par støtdemperfjærer for bl.a Losi Mini-B Spesifikasjoner: 2 stk - Silver Springs – Soft (0.73 lb/in)  (10mm Ø innvendig, 24mm Lengde) 2 stk - Black Springs – Medium (1.44 lb/in)  (10mm Ø innvendig, 24.3mm Lengde) 2 stk - Gold Springs – Hard (2.06 lb/in)  (10mm Ø innvendig, 24.6mm Lengde)

LOS252065 - Pinion Drev 14T 1.5m 8mm Aksling (1) Motordrev 14 tenner 1.5M for 8mm motoraksel

LOS252088 - Pinion Drev 23T 1.5m 8mm Aksling (1) Motordrev 23 tenner 1.5M for 8mm motoraksel

LOSB2857 - Shock Boots (4): 5IVE-T, MINI WRC Støtdemperbeskyttere LOSI 5IVE,Mini WRC