RC-BILER OG DELER

7138G - Toe Link Front/Rear Green 1/16 (4) FEATURES: Molded composite plastic construction, green in color INCLUDES: Two Front and two Rear Toe Links           Eight Hollow Metal Balls

7150 - Half shafts, left or right 1/16 These are the Left or Right Half Shafts for use on the                  Traxxas 1/16 E-Revo 4WD RTR FEATURES: Nylon construction           Black in color INCLUDES: Two Internal Splined Half Shafts           Two External Splined Half Shafts           Four Metal U-Joints

Driveshaft assembly (1) left or right 1/16 This is the Driveshaft Assembly for use on the                     Traxxas 1/16 E-Revo  FEATURES: Nylon construction           Black in color           Fits left or right INCLUDES: One Fully Assembled Driveshaft Assembly  

7152A - Slipper clutch komplett 1/16 Slipper clutch, complete (includes slipper clutch hub, clutch pad, spring, 3.0mm NL, 1.5x6mm pin) INCLUDES: One Slipper Clutch Hub           One Clutch Pad           One Spring           One 3mm Locking Nut           1.5x6mm Pin

7154 - Wheel Hubs 6 Kant 12x4mm - 4stk 4 stk 4x12x4mm hex med fire 1.5x8mm pin.

Rocker arm post 1/16 FEATURES: Steel construction INCLUDES: Four Rocker Arm Posts SPECS:    Length: 18.5mm (0.73")           Diameter: 4mm (0.16")

7250 - Drivaksling Summit 1/16 Indre (1) Foran eller bak mot differensial    Driveshaft assembly, inner (1) (fits front & rear, differential side) Replacement part for these models: 1/16 Summit VXL 1/16 Summit

7251 - Drivaksling Summit 1/16 Yttre (1) Foran eller bak mot hjul Driveshaft assembly, outer (1) (fits front & rear, stub axle side) Replacement part for these models: 1/16 Summit VXL 1/16 Summit

7381 - Differential Locker 1/16 (2) These are the Differential Lockers for 1/16 from Traxxas. FEATURES: Plastic construction INCLUDES: Two Differential Lockers

7415 - Body Mounts Front/Rear 1/10 Rally VXL   FEATURES Made of black plastic   INCLUDES One front body mountOne rear body mount

7415X - Karosserifeste Rally Foran/Bak + Stolpe Front and rear body mounts with rear body post Replacement part for these models: Ford® Fiesta® ST Rally

7421 - LCG Chassis Kit Slash 4x4 This is the optional Low CG Chassis Conversion Kit for the Traxxas 1/10 scale Slash 4x4. FEATURES 1" (25.4mm) lower than stock chassis Holds battery and electronics as deep in the chassis as possible to to enhance handling and increase cornering speed Plastic chassis is reinforced by integrated ribs to prevent flex under load Smooth underside to reduce drag and prevent snags Integrated personal transponder mount Complete kit, no extra parts needed INCLUDES Chassis Two Nerf Bars Front and Rear Bulkheads Motor Mount and Plate Battery Hold Down Front and Rear Hold-down Retainers Servo Horn Steering Linkage Waterproof Receiver Box with O-Ring Seal Gear Cover Wire Retainer Complete Hardware Set Manual: http://traxxas.com/sites/default/files/7421-KC1547-R00-LCG-INST-121102_0.pdf

7422 - LGC Chassis 1/10 Slash/Rally 4x4 Chassisplate for Traxxas 4x4 med LGC Slash 4X4 Replacement part for these models: Ford Fiesta® ST Rally Rally VXL Slash 4X4 Platinum Slash 4X4 Ultimate

7423 - Nerf Bars, Chassis (2) For LCG chassis

7424 - Motakerboks 1/10 Rally og Slash Ultimate 4x4 VXL This is the Receiver Box for the 1/10 scale Traxxas Rally Race Car and Slash 4x4 Ultimate FEATURES: Plastic construction, black in color INCLUDES: Upper and lower Case Halves with Wire Cover           Gasket           Two Foam Pads           Two 3x12mm Button Head Cap Screws           Two 3x6mm Button Head Cap Screws           Two 2.5x12mm Cap Screws           Instruction Sheet SPECS:    Box Dimensions: 1.6 x 1.7 x 2.1" (41 x 43 x 54.5mm) Replacement part for these models: Ford® Fiesta® ST Rally Slash 4X4 Ultimate DETAILS

7425 - Seal kit, receiver box (includes o-ring, seals, and silicone grease)   This is the Receiver Box Seal kit for the 1/10 scale Traxxas Rally Race Car and Slash 4x4.  

7426X - Battery Hold-Downs Tall 1/10 Batteriholder for Rally og Slash 4x4 Ultimate (LCG) FEATURES: Made of black plastic. INCLUDES: One battery hold-down One tall front hold-down retainer One tall rear hold-down retainer SPECS:    hold-down, length:         7-5/8" (194mm) width:          1-1/4" (32mm) Height:      3/8"   (10mm) front retainer, length:    46mm   (1-13/16") width:     50mm   (2") thickness: 8.5mm  (5/16") rear retainer, length:     48mm   (1-7/8") width:      42mm   (1-5/8") thickness:  17mm   (11/16") Extended battery hold-down with front and rear retainers accommodates taller batteries on vehicles equipped with the low-CG 4X4 chassis. Does not fit standard chassis. For a complete chassis conversion, use kit 7421.

7429 - Bulkhead, Rear, Rally;Rustler, Slash 4x4 (1) Replacement part for these models: Ford Fiesta® ST Rally Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Platinum Slash 4X4 Ultimate

7430R - Bulkhead Front Rustler 4x4 FEATURES: Hardened plastic construction           Black in color Bulkhead, front (for use only with #6723R chassis) Replacement part for these models: Rustler® 4X4 VXL Rustler® 4X4

7430 - Bulkhead Front Slash/Rally LCG 4x4  FEATURES: Hardened plastic construction           Black in color INCLUDES: One front bulkhead           Height: 38mm           Length: 127mm           Width:  116mm Replacement part for these models: Ford Fiesta® ST Rally Slash 4X4 Platinum Slash 4X4 Ultimate

7436 - Body bumper, foam Støtfangerskum foran på 1/10 Rally

7437 - Skidplate, front

7438 - Styrelink Rally, Hoss, Slash LCG, Rustler 4x4 Steering linkage comes assembled with rod ends and hollow balls Replacement part for these models: Ford® Fiesta® ST Rally Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate

7447 - Spring, Shock, White (GTR XX-long) (0.884 rate pink) (1 pair) Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the rate, the stiffer the spring. (0.884 rate pink stripe) (Sold in pairs) Accessory part for these models: Rustler® 4X4 Slash 4X4 VXL Slash 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 Hoss® 4X4 VXL Rustler® 4X4 VXL Slash 4X4 Ultimate

7460A - Traxxas Motor Mount Rustler/Slash 4x4 LGC Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1) Replacement part for these models: Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Accessory part for these models: Ford Fiesta® ST Rally Slash 4X4 Platinum  

7460R - Traxxas Motor Mount 6061-T6 Aluminum Blue-Anodized Accessory part for these models: Ford® Fiesta® ST Rally Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate

7473 - Tires & wheels, assembled, glued (White wheels, BFGoodrich® Rally, gravel pattern, tires, foam inserts) (2) (TSM rated) Dekk limt på felg for Traxxas Rally 1/10 dette er samme som sitter på RTR Tires & wheels, assembled, glued (White wheels, BFGoodrich Rally, gravel pattern, tires, foam inserts) (2) Accessory part for these models: Ford Fiesta® ST Rally

7473A - Tires & wheels, assembled, glued (orange wheels, BFGoodrich® Rally, gravel pattern tires, foam inserts) (2) (TSM rated) Dekk limt på felg for Traxxas Rally 1/10 dette er samme som sitter på Fiesta ST Rally Tires & wheels, assembled, glued (orange wheels, BFGoodrich Rally, gravel pattern tires, foam inserts) (2) Accessory part for these models: Ford Fiesta® ST Rally

7473R - Tires & wheels, assembled, glued (White wheels, BFGoodrich® Rally, gravel pattern, S1 compound tires, foam inserts) (2) Dekk limt på felg for Traxxas Rally 1/10 dette er samme som sitter på Fiesta ST Rally Tires & wheels, assembled, glued (White wheels, BFGoodrich Rally, gravel pattern, tires, foam inserts) (2) Accessory part for these models: Ford Fiesta® ST Rally

7473T - Tires & wheels, assembled, glued (black wheels, gravel pattern tires, foam inserts) (2) (TSM rated) Dekk limt på felg for Traxxas Rally 1/10 dette er samme som sitter på Fiesta ST Rally Tires & wheels, assembled, glued (black wheels, gravel pattern tires, foam inserts) (2) (TSM rated) Accessory part for these models: Ford Fiesta® ST Rally

7473X - Tires & wheels, assembled, glued (Green wheels, BFGoodrich® Rally, gravel pattern tires, foam inserts) (2) (TSM rated) Dekk limt på felg for Traxxas Rally 1/10 dette er samme som sitter på Fiesta ST Rally Tires & wheels, assembled, glued (Green wheels, BFGoodrich® Rally, gravel pattern tires, foam inserts) (2) (TSM rated) Accessory part for these models: Ford Fiesta® ST Rally

7477 - Drev beskytter og Kabelholder Klips Set This is the Gear Cover/Motor Wire Hold Down for use on the Traxxas Slash 4X4 LCG/Rally 4x4 VXL . FEATURES Nylon construction Black in color INCLUDES One Gear Cover One motor wire hold down  

7490 - Motor Plate Slash 4x4 LCG/Rally Vxl FEATURES Aluminum construction, anodized blue in color INCLUDES Aluminum Motor Plate Replacement part for these models: Ford Fiesta® ST Rally Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Platinum Slash 4X4 Ultimate

7523 - Øvre Chassis og Batteri Holder LaTrax Teton-Rally Reservedel for disse modellene: 1/18 LaTrax® Rally 1/18 LaTrax® Rally VR46 1/18 LaTrax® Teton®

7530 - Bulkhead, front & rear / differential housing, front & rear For 1/18 Rally, Teton, SST

7531 - Suspension Arms Front/Rear (4) These are the Front and Rear Suspension Arms for the Latrax Rally Car from Traxxas.     FEATURES For front and rear wheels   INCLUDES Two Front and two Rear Suspension Arms Four Plastic Inserts Replacement part for these models: 1/18 LaTrax® Rally 1/18 LaTrax® Rally VR46

7532 - Caster blocks (c-hubs) (2)/ steering block (2) SPECIFICATIONS caster hubs, length: 28mm (1-1/8") width: 14mm (1/2") height: 16mm (5/8") steering blocks, length: 29mm (1-1/8") width: 28mm (1-1/8") height: 20mm (3/4") Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton®

7533 - Suspension Pin Set Complete Front/Rear Hardware This is a set of Complete Suspension Pins for the Traxxas Latrax Rally Car and Teton from Traxxas     FEATURES Steel constructionUpper and lower pins for front and rear suspension   INCLUDES Eight Suspension Pins, four Screws

7536 - Camber Links (4) Toe Links (2)   FEATURES Plastic construction Camber links install between stub axle carriers and bulkhead for front and rear wheels Toe links install between caster/steering blocks and steering bellcranks on front wheels INCLUDES Four Camber and two Toe Links

7540X - Pivot Balls Black (6) Silver (2)Black Long (2) Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton

7541X - Bearings 4x8mm (2)/6x10mm (8)/8x12mm (5) FEATURES Steel construction offers smoother operation and longer life than bushings Replaces all bushings used in the hub carriers, diff assembly, and driveshaft INCLUDES Two 4x8x3mm Ball Bearings Eight 6x10x3mm Ball Bearings Five 8x12x3.5mm Ball Bearings

7542 - Body Clips Mini (12) FEATURES Steel construction Sized for the 1/18 scale body on the Latrax Rally Car INCLUDES Twelve Body Clips    

7543X - Skruesett for 1/18 La Trax Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton®

7550 - Driveshaft Assembly Front/Rear (4) Drivakselsett for Latrax Rally Bil fra Traxxas. FEATURES For front and rear Plastic construction INCLUDES Two Front and two Rear Driveshaft Assemblies      

7550R - Driveshaft Assembly Front/Rear 6061-T6 Aluminum Drivakselsett oppgradering for Latrax Rally Bil fra Traxxas. 1 stk foran, 1 stk bak   FEATURES 6061-T6 aluminum construction, blue in color Replaces stock plastic driveshafts INCLUDES One each Front and Rear Driveshaft Assembly      

7552X - Carriers Stub Axle (2) Stubaxle Carriersett for Latrax Teton Bil fra Traxxas. FEATURES Left and Right Stub Axle Carriers Plastic construction INCLUDES One Left and One Right Stubaxle Carrier      

7555 - Aluminum Center Driveshaft with Steel Pin Mellomaksel for LaTrax Rally og Teton 

7579 - Differential Assembly Complete Gear Differensialdrev sett for LaTrax Rally og Teton 

7579X - Metal Gear Set Differential Differensialdrevsett i metall for LaTrax Rally,SST og Teton  Gear set, differential, metal (output gears (2)/ spider gears (4)/ ring gear, 35T (1)/ 2x14.8mm pin (1) Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton Accessory part for these models: 1/18 LaTrax® Rally

7581 - Spool (solid axle), 6061-T6 aluminum (blue-anodized) Komplett differensial oppgradering for LaTrax Rally og Teton 

7591 - Spur Gear 54T for the Latrax Rally Car Spurdrev for LaTrax Rally   FEATURES Plastic construction Stock replacement spur gear INCLUDES 54 Tooth Spur Gear for the Latrax Rally Car  

7592 - Pinion 14T 48p/Set Screw for the Latrax Rally Car For 2mm motoraksling Piniondrev 14T for LaTrax Rally   FEATURES Steel construction Stock replacement pinion gear INCLUDES 14 Tooth Pinion Gear with Set Screw  

7611 - Karosseri LaTrax Teton 1/18 Klar Lexan Ulakkert karosseri for bl.a Latrax Teton, ferdig hullet og klipt, med dekaler. Body, LaTrax® 1/18 Teton, (clear, requires painting)/ decal sheet  

7630 - Suspension Arms Front/Rear (2) Teton These are the Front or Rear Suspension Arms for the LaTrax Teton Monster Truck from Traxxas Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton   FEATURES Composite plastic construction Fastens to front or rear bulkheads   INCLUDES Two Front or Rear Suspension Arms

7636 - Camber Links (4) Toe Links (2) Teton Camber Links for the LaTrax Teton Monster Truck from Traxxas. FEATURES Plastic construction Non-adjustable INCLUDES Four Camber Links Two Toe Links

7640 - Spur Gear 60T Teton 60T Spurdrev for LaTrax Teton Monster Truck fra Traxxas

7645 - Pinion 10T 48p /Set Screw Teton 2mm Aksling 10T Piniondrev for LaTrax Teton Monster Truck fra Traxxas

7650 - Driveshaft Assembly Front/Rear (2) Drivakselsett for Latrax Teton Bil fra Traxxas. FEATURES For front and rear Plastic construction INCLUDES One Front and One Rear Driveshaft Assemblies Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton      

7650R - Driveshaft Assembly Front/Rear 6061-T6 Aluminium (2) Drivakselsett i aluminium for Latrax Teton Bil fra Traxxas.  (blue-anodized) FEATURES For front and rear Aluminium construction INCLUDES One Front and One Rear Driveshaft Assemblies      

7660 - Shocks Oil Filled (2) Teton/SST Støtdempersett for Teton & SST LaTrax Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton INCLUDES Shocks, oil-filled (assembled with springs) (2)

7661 - Spring, shock (1 pair) Mål : 46mm lange, 10mm innvendig. Replacement part for these models: 1/18 LaTrax Teton

7662 - Rebuild Kit Oil-Filled Shocks Teton INCLUDES Two each, Bladders, Pistons, Shaft Guides, Caps, Rod Ends Four Clips Rebuild kit for LaTrax® Teton® and Prerunner oil-filled shocks includes O-rings, bladders, pistons, shaft guides, E-clips, shock caps, and rod ends. Renews two shocks.

7669 - Wheel Hubs Hex Teton (4) These are the Wheel Hub Hexes for the LaTrax Teton Monster Truck from Traxxas     FEATURES Composite plastic construction   INCLUDES Four Wheel Hub Hexes   SPECIFICATIONS Hex Size: 12mm

7683 - Ring Gear/Differential/Pinion Gear/Diff Teton FEATURES Steel construction INCLUDES Ring Gear Differential/Pinion Gear Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton® Accessory part for these models: 1/18 LaTrax® Rally  

7710 - Karosseriforsterkning X-MAXX karosseri 7711 Traxxas body reinforcement sets provide added protection for your X-Maxx during extreme driving. These high-strength composite reinforcements help spread impact forces through the body, ensuring long-lasting fun through the toughest landings and hardest hits. Replacement part for these models: X-Maxx® DETAILS

7721 - BulkHead Front Nedre Reservedel for disse modellene: X-Maxx® Ultimate X-Maxx®

7729 - Bærearmsett Øvre Høyre/Venstre til X-Maxx Suspension arms, upper (left or right, front or rear) (2) Replacement part for these models: X-Maxx®

7730 - Bærearm Nedre Høyre til X-Maxx (1) Suspension arm, lower (right, front or rear) (1)

7731 - Bærearm Nedre Venstre til X-Maxx (1) Suspension arm, lower (left, front or rear) (1)

7732 - Caster Blocks (C-hubs) til X-Maxx V-H C-Huber foran for X-Maxx, venstre og høyre side. Replacement part for these models: X-Maxx® Accessory part for these models: X-Maxx® Ultimate

7733X - Front Bumper Mount and Bumper Support X-Maxx, erstatter 7733 Støtfanger feste foran for X-Maxx Replacement part for these models: X-Maxx® Accessory part for these models: X-Maxx® Ultimate

7734 - Rear Bumper Mount and Bumper Support X-Maxx Støtfanger feste bak for X-Maxx Replacement part for these models: X-Maxx® Accessory part for these models: X-Maxx® Ultimate

7735 - Støtfanger Foran til X-Maxx (1) Replacement part for these models: X-Maxx® Ultimate X-Maxx®

7737X - Steering Blocks (Svingarmer) til X-Maxx V-H Svingarmerr foran for X-Maxx, venstre og høyre side. Må brukes sammen med  lager 20x32x7mm Replacement part for these models: X-Maxx® Ultimate X-Maxx® Accessory part for these models: X-Maxx® Ultimate

7744 - Skidplate Front (1) Bak (1) Støtputer (2) Reservedel for disse modellene: X-Maxx® Ultimate X-Maxx®

7746X - Heavy-Duty Servo Saver Spring with Steel Link X-Maxx-XRT  

7749 - Adapter, standard servo (adapts standard servo to fit in X-Maxx) Adapter for X-Maxx som lar deg bruke standard servo. Accessory part for these models: Maxx® X-Maxx® X-Maxx® Ultimate

7750X - Driveshaft Steel 160mm HD X-Maxx-Funco Pro (1)  

7751X - Rebuild Kit HD Steel Driveshaft (7750X) X-Maxx-Funco-XRT Rebuild kit for use with 7750X heavy duty X-Series™ driveshafts. Kit includes pins for 2 driveshaft assemblies.

7754R - Drivkopper i Stål XHD (2) Drivkopp, stål, ekstremt kraftig (2)/ 3x8mm CS, kraftig (2) (brukes bare med #7750X drivaksel) (maskinert, varmebehandlet) Gi din X-Maxx® eller XRT® den tøffeste drivlinjen som er mulig med disse ekstremt kraftige drivkoppene. De er maskinert av høyverdig varmebehandlet stål for å motstå avrunding fra dogbonekontakt. Inkluderer 3x8 mm skruer (2). Selges i par. (Brukes bare med 7750X eller 7896 drivaksler) Tilbehør del for disse modellene: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®