RC-BILER OG DELER

AXI230052 - Karosseri 1/10 SCX10 PRO Klar Lexan Klart 1/10 karosseri designet for bl.a SCX10 PRO chassiet, karosseriet kommer ferdig klipt og hullet, masker vinduer og lakker, fjern beskyttelsesplast og du er ferdig :-) Dekaler for lykter, grill, dørhåndtak, + Axial reklame. Spesifikasjoner: Lengde : 410mm Bredde : 168mm på midten, 136mm over forhjul, 148mm over bakhjul  Høyde : 100mm Hjulbase : 312mm Reel vekt uten lakk : 98gram

Tamiya 58525 - 1/10 Wild One RWD Off-Road Racer Kit  Varenr: 58525 Lengde: 425mm. Bilder viser montert og malt modell. Anbefalt tilbehør: Radio/Motaker med  minst 2 kanaler Batteri/Lader (7.2V Nimh eller 2S Lipo Rund kasse batteri) lader etter valgt batteri eller vår anbefaling E680 og ladekabel Deans/T-Plugg Regulator (Vår anbefaling HW1060) Servo (Vår anbefaling HD-9001MG ) Kulelager ( 10 stk 1150 5x11x4mm eller pakke med 16 stk 54579 ) + 3 stk 850 5x8x2.5mm Lakk PS (BOXART) (RE)BORN TO BE WILD Dette er en gjenutgitt versjon av Wild One 58050, den klassiske Tamiya 2WD RC buggyen som opprinnelig ble utgitt i 1985. Et veltebur og frontlykter bidrar til å gi denne buggyen en skalarealistisk tilstedeværelse. Karosseriet og taket er laget av slitesterk, lett polykarbonat og en førerfigur er inkludert for å live opp cockpiten. Ribbede frontdekk gir retningskontroll, og bakdekkene har et blokkmønster for høyt grep, slik at du kan nyte dynamisk terrengkjøring.   Chassisegenskaper Slitesterk lettvekts ABS-ramme matches med et batterideksel som er kompatibelt med moderne strømkilder som Tamiya Racing Packs og LF-batterier. 4-hjuls uavhengig fjæring er utstyrt med aluminium oljedempere og bakarmer og en bred slitebane sikrer utmerket terrengstabilitet. Den lukkede girkassen beskytter mot skitt og rusk og er utstyrt med en differensial for jevn svingkjøring. I tillegg har drivaksler skjøter av hundeben og støvdeksler for å sikre suveren beskyttelse.   Spesifikasjoner ●Lengde: 425 mm ● Høyde: 140 mm ● Bredde: 225 mm ● Akselavstand: 255 mm ● Slitebane (F/R): 190 mm ● Dekkbredde/diameter: 23/83 mm (foran), 38/88 mm (bak) ●ABS-rammechassis Hus i polykarbonat ●Bakmotor, bakhjulsdrift ●3-bevel differensial ●F/R Enkel hengende armfjæring ●F/R aluminiumoljedempere ●Girforhold＝1:7.54, 1:9.05 ●Type 540-motor   Separat nødvendige deler ●2-kanals R/C-system med ESC ●Batteripakke og lader ●Batterier for sender●Krever en elektronisk hastighetskontroller (selges separat) ) Informasjonen er oppdatert fra og med 12. juli 2012. Spesifikasjoner kan endres uten varsel.

Traxxas TRX-4M Chevrolet K-10 High Trail 1/18 RTR Traxxas kommer her med en helt komplett og høydetaljert skala crawler av den nydelige Chevrolet K-10 i skala 1/18! TRX-4M serien fyller tomrommet mellom 1/10 og 1/24 crawlere og oser av kvalitet og fremkommelighet. Her snakker vi nydelige skaladetaljer, justert ned til den minste detalj. den har oljefylte dempere, LED-belysning, heavy duty servo og drivverk, frame rails i stål, tre forskjellige drive modes og masse mer. Denne er klar for ett nytt eventyr, er du? TRX-4M kommer ferdig montert og klar til bruk, det eneste du trenger utenom er 4 AA til fjernstyringen. Den perfekte størrelsen eksisterer! Traxxas har ved å lage en Crawler i 1/18-størrelsen og gitt denne bilen enda større dekk, høyere bakkeklaring (High Lift), større aksler og en kraftig motor som fungerer sammen for å gi deg en god og robust kjøreopplevelse. Den innovative fjæringsgeometrien lar TRX-4M snu og manøvrere på en brøkdel av plassen som kreves av mindre 1/24-modeller. Spenstige, udempede fjærer er erstattet med silkemyke oljefylte støtdempere. Vakre skaladetaljer blir også enda mer synlige.   Allsidighet TRX-4M er designet for å utmerke seg overalt hvor det er en morsom vei å kjøre. Den smoode gassresponsen, motoren med høyt dreiemoment og 30 % tightere svingradius og 45 graders styrevinkel gjør at TRX-4M enkelt ta seg gjennom trange porter og andre hindere. Ved hjelp av større hjul, dekk og høyere bakkeklaring kan du virkelig teste ferdighetene dine i utfordrende terreng. Drive Modes Sport gir deg full hastighet forover og bakover med bremser og ingen automatisk dragbrake. Trail er standardmodus på TRX-4M. Denne er som Sport Mode, men legger til jevn dragbrake for maximal kontroll i nedover/oppoverbakker. Crawl setter på full brem i det øyeblikket gassen slippes, og lar sjåførene fortsette å rygge uten et nytt trykk på avtrekkeren. Crawl-modus er perfekt for å kunne opprettholde god flyt mens du crawler i teknisk terreng. Spesifikasjoner Lengde 269mm Bredde 127mm Høyde 127mm Wheelbase 162mm Bakkeklaring 40mm Hex 7mm Vekt 468g u/batteri Hjul Thompson Baja Pro XS Motor Titan 180 87T Brushed ESC/Mottaker ECM-2.5 Servo 2065T Heavy Duty Waterproof Batteri 2s 750mah - 20C LiPo Lader USB 2Amp Radio TQ 2.4GHz 2-Kanaler Small-scale adventure takes a big leap in performance with the TRX-4M™ Chevrolet® K10 High Trail™ Edition. The High Trail pickup comes with a preinstalled Long Arm Lift Kit for 35% more center ground clearance than a standard TRX-4M and an extended wheelbase for even more all-terrain capability. Oversize Mickey Thompson® Baja Pro™ XS tires enhance traction and give K10 a dramatic lifted truck profile. From indoor fun to outdoor adventure, TRX-4M K10 High Trail Edition delivers the quality and performance you expect from Traxxas. MODEL 97064-1: TRX-4M High Trail™ Edition Scale and Trail™ Crawler with Chevrolet® K10 pickup body: 1/18 scale 4X4 trail truck, fully-assembled, Ready-To-Drive®, with TQ™ 2.4GHz 2-channel transmitter, and ECM-2.5 waterproof electronics. GM used under license to Traxxas.  

1/10 Axial SCX10 III Pro-Line 40års Chevy K10 Crawler  Proline feirer i samarbeid med Axial 40 års jubileum med å gi ut 1982 stk unikt nummererte limited edition biler med lisensiert Chevrolet K10 karosseri på SCX10 III chassis og Klasse 1 hyrax hjul. Bilen leveres ferdig lakkert/montert, med nummerert motorplate, Proline Dempere, Alufelger med Hyrax dekk. Nødvendig tilbehør: Batteri med iC3/Ec3 og lader for dette: FEATURES Proven SCX10™ III chassis includes high-performance Pro-Line® upgrades Pro-Line 1982 Chevy K10 body has a molded grille, front and rear bumpers, brake lights, and 2-piece side-mirrors Pro-Line Hyrax G8 Class 1 tires with detailed sidewalls offer excellent grip on tough terrain Pro-Line Rock Shooter 3-piece beadlock aluminum/composite wheels provide strength and scale realism Pro-Line Big Bore Scaler Shocks hold more oil for the finest shock performance LED light system includes headlights and amber running lights Each motor plate has a unique production number and special commemorative coin is included Single-speed transmission features a full set of ball bearings and all-metal internal gears for strength and durability Stiff SCX10™ III steel C-channel chassis reduces frame flexing and increases suspension movement precision Includes AR45P Portal Axles Spektrum™ SLT3 2.4GHz radio with SR315 Dual Protocol receiver delivers dependable SLT 2.4GHz control now and DSMR® upgrade potential for the future Included and installed power system features a Dynamite® 35T brushed motor and Spektrum 40A brushed ESC Metal gear, 15kg high torque servo is waterproof for crawling with confidence in any weather and trail conditions OVERVIEW The Axial® team has admired the quality and performance of Pro-Line® brand products ever since we began making RC rigs more than 15 years ago. Now we're excited to help celebrate Pro-Line Racing's own 40th anniversary with our Limited Edition 40th Anniversary SCX10™ III Pro-Line 1982 Chevy K10! Trail-ready right out of the box, this highly collectible, ready-to-run 4X4 crawler comes with many of your favorite Pro-Line upgrades — including Big Bore Scaler shocks, Rock Shooter aluminum/composite wheels, and Hyrax G8 Class 1 tires. It's topped off with an exclusive, factory-painted Pro-Line 1982 Chevy K10 body that's tricked out with such scale details as a molded grille, front and rear bumpers, brake lights, and two-piece side mirrors. Each Limited Edition chassis has a unique production number laser-etched into the motor plate. An essential item for fans and collectors, the Limited Edition SCX10 III Pro-Line 1982 Chevy K10 RTR makes a striking addition to your display shelf. It also comes equipped with proven Axial SCX10 III engineering for successfully taking on the most taxing trails. The stiff SCX10 III steel C-channel chassis reduces frame flexing and increases suspension movement precision. The single-speed transmission has full ball bearings and all-metal internal gears for strength and durability. To complete the ready-to-run package, the Axial team includes a perfectly matched brushed power system and Spektrum™ SLT3 radio. Just add your choice of battery and charger. Only 1,982 of these Limited Edition crawlers will be produced, so Axial and Pro-Line fans everywhere should act fast. Get yours before they're gone!

500907039 - 3 Kamre Runde Baklamper for Henger-Lastebil (2) 2 stk runde 3 kammer beklamper for 4 stk 1.8mm SMD led. Festes med  skrue i midten. Størrelse: Ø - 11.07mm Tykkelse: 5.2mm

AX31467 - Steel Links M4x128mm SCX10 II (2) (AXIC1467) 2stk 4mm Styrelink mellom hjul foran på SCX10 II (Cherokee/Trail Honcho)

500907052 - Carson Auxiliary Head Lamp (2)  2 headlights 2 with blue and 2 white glasses for mounting on a lamp bracket, in 1:14 scale

Boom Racing Aluminum Rear Shock Hoops for Axial SCX10 II - 1 Pair Black (RESTELAGER) Støtdempertårn bak i aluminium for SCX10 II, leveres med hardware/skruer og div. PRODUCT INFORMATION: Color: Black Package total weight: 42.00 grams (incl. packaging) Factory description: Boom Racing Axial SCX10 II Aluminum Rear Shock Hoops for SCX10 II - 1 Pair Manufactured by Boom Racing Manufacturer number: BR955010R

AX24251 - Axial NVS - Night Visions System The ultimate level in detail you can now add the NVS light system which features controls for headlights, tail lights, brake lights, and right/left turn signals, as well as some extra auxiliary lighting. • When going forward the headlights brighten, when the brakes are applied the brake lights will brighten • Turn left or right and the blinkers will signal your turn • The main control box is a nice compact size measuring 47x32x23mm ~ 1.8x 1.25x0.9” (Width x Depth x Height) • External on/off switch so you can mount it remotely to make it easier to reach • Separate on/off switch for auxiliary lighting mounted on main control box • Separate light connectors for up to 10 LED light strings • Additional/replacement LED light strings are available • Use Simple LED controller - AX24257 as an alternative   Includes the following LED light strings:      (1) Double LED light string for headlights (White LED)      (1) Double LED light string for brake lights (Red LED)      (2) Double LED light strings for turn signals (Orange LED)      (1) 5 LED light string for auxiliary lights (White LED) COMPATIBILITY PARTS GALLERY    

AX31592 - AR44 Solid Axle Housing (Front and Rear) (AXIC1592) Akselhus (One piece) for SCX10 II, UMG10 4x4-6x6, 1.9" Wraith • AR44 Solid Axle Housing (Front and Rear) • Single piece, molded plastic solid axle design • Integrated C-hubs and lockouts • Integrated truss • Better ground clearance • Includes one front and one rear axle • Genuine Axial Product

HPI-17540 - BMW M3 E30 Clear Body 200mm Klart lexankarosseri for 1/10 Touring/Driftebiler, leveres med dekaler. (Uklippet) ill.foto BMW M3 E30 er en av de mest kjente Touring Bilene fra 1980-tallet, etter å ha dominert løp i de berømte DTM- og BTCC-racingene serien, samt seire i utholdenhetsløp som 24 timersløp på Nürburgring. Den gategående BMW M3 inkludert aggressive modifikasjoner designet for racerbaneytelse som brede skjermer, bredere felger og dekk, en aerodynamisk pakke for downforce ved høye hastigheter, og en motor innstilt for mer hestekraft. Resultatet var en gatebil som ble proklamert som en av de Topp 10 beste sportsbiler på 80-tallet og nylig kåret som en av de "5 beste sjåførbiler gjennom tidene" av Automobile Magazine. HPI gjenskaper trofast BMW M3 E30 for 1/10 R/C-biler med dette 200 mm karosseri som passer til brede sedaner i skala 1/10 og har det vanlige HPI kvaliteten på detaljer. Inkludert med karosseriet er et forhåndskuttet klistremerkeark som inkluderer vinduslinjer, frontlykter, griller, baklys, offisielle logoer og mye mer, og gir touringbilen din ett realistisk ferdig produkt. Dette karosseriet er ulakkert slik at du kan lakkere den i favorittfargene dine. Den passer til 200 mm touringbiler og kan også brukes på 190 mm touringbiler med bruk av brede offsethjul. Oversprayfilm er inkludert, samt vinylvindusmasker for å lakkere raskt og enkelt. Et instruksjonsark er inkludert for dekaler, og kroppen har fordypningsmerker for karosseristolper. Photorealistic die-cut premium vinyl decals include window frames, headlights, tail lights and more, plus official logos! Front and rear light buckets Molded polycarbonate rear wing Overspray film and pre-cut vinyl window masks make painting fast and simple A decal instruction sheet is included for decal placement The body has dimple marks for body post drill locations Karosseriet har fordypningsmerker for plassering av karosseriestolper til Hpi bilene, men kan fint benyttes på andre merker ved å merke seg hvor hull skal være. Molded from clear polycarbonate plastic for durability and long life This is an officially licensed replica. Clear body (finished example shown) THIS PART FITS THE FOLLOWING KITS / PARTS: RTR NITRO RS4 3 EVO+ WITH 1967...OPT NITRO RS4 3 DRIFT WITH NISSAN...OPT RTR E10 with Porsche 911 TurboOPT RTR E10 with Porsche 911 Turbo...OPT Nitro RS4 RTR 3 Evo+ w/ Porsche 911OPT Sprint 2 Sport w/ Porsche 911 GT3...OPT Sprint 2 Flux w/ Porsche 911 GT3...OPT Nitro RS4 3 Evo+ 2.4GHz w/ Porsche...OPT Nitro RS4 3 Evo+ 2.4GHz w/ BMW M3OPT E10 Drift Falken Mustang GT RTROPT Sprint 2 Nissan GT-R R35OPT Sprint 2 1969 Chevrolet Camaro Z28OPT RTR Sprint 2 SportOPT Sprint 2 Drift 2010 Chevrolet...OPT Sprint 2 Drift Nissan 350ZOPT RTR Sprint 2 Flux w/ Porsche 911...OPT Sprint 2 Flux BMW M3 GT2OPT E10 DRIFT with Mazda RX-7 FD3S...OPT RTR E10 with Ford Mustang GT-ROPT Sprint 2 Falken Porsche 911OPT Sprint 2 Flux 2010 Chevrolet...OPT E10 Drift Nissan S13 Discount TireOPT Sprint 2 1969 Ford Mustang RTR-XOPT E10 2014 Ford MustangOPT E10 Drift Falken Tire 2013 Ford...OPT E10 Drift VGJR Ford Mustang...OPT NITRO 3 DRIFT RTR WITH DISCOUNT...OPT Nitro RS4 3 Evo+ 1969 Ford Mustang...OPT Sprint 2 Flux Ford Mustang GT-ROPT Sprint 2 Flux BMW M3 GTSOPT RS4 Sport 3 BMW M3 E30OPT RS4 Sport 3 Flux Falken Porsche...OPT RS4 Sport 3 Drift Subaru BRZOPT RS4 Sport 3 2015 Ford Mustang Spec...OPT RS4 SPORT 3 RTR KEN BLOCK 1965 FORDOPT RS4 SPORT 3 Creator EditionOPT E10 TOURING MICHELE ABBATE...OPT E10 DRIFT FAIL CREW NISSAN SKYLINE...OPT RS4 Sport 3 Drift Dai Yoshihara...OPT RS4 SPORT 3 DRIFT TEAM WORTHOUSE...OPT RS4 SPORT 3 FLUX FORD GT HERITAGE...OPT RS4 SPORT 3 1969 FORD MUSTANG...OPT

Traxxas TRX-4 1/10 Crawler Chevrolet K10 ´79 RTR  Du trenger i tillegg: Lader til valgte batteri, vi kan anbefale SkyRC S100 NEO (må ha TRX ladekabel for konvensjonelle batterier) for ( iD batterier 2S - 3S ) Batteri med TRX kobling, vi kan anbefale disse: 2S 5200 - 2S 8000  (OBS ikke alle har TRX kontakt, velges i varianter) 4 x AA til Radio. Highlights: Autentiske skaladetaljer og realisme Malt karosseri med klare vinduer Skala 1,9" Canyon Trail-dekk™ på fabrikkfelger Portalaksler Enkelttrinns girkasse Spolelåste aksler TQ Radiosystem Lettere vekt, lav CG-ytelse TRX-4 Chevrolet K10 kombinerer den uslåelige bakkeklaringen og kjøredynamikken til Traxxas portalaksler, klebrige Canyon Trail-dekk™ og ett detaljert klikkløs karosseri. TRX-4 Chevrolet K10 er en slankere, ytelsesfokusert crawler designet for økt allsidighet. Chevrolet K10 er utstyrt med kromdetaljer og krommede felger, som løfter TRX-4 Chevrolet K10 dine terrengeventyr med stil. Hva som er i esken: TRX-4 Crawler XL-5 HV vanntett elektronisk hastighetskontroll Titan 21T Reversert motor TQ 2,4 GHz radiosystem Veddlikeholdsverktøy av høy kvalitet Navn: TRX-4 Ford F-150 Type: Trail Truck / Crawler Ferdighetsnivå: 1 Chassis: Utvidet stålstigeramme Skala: 1/10 Vekt: 2,63 kg Lengde: 566 mm Bredde: 249 mm Høyde: 241 mm Akselavstand: 336 mm Bakkeklaring i midten: 80 mm Drivlinje: Akseldrevet 4WD Girkasse: Entrinns girkasse Differensialtype: Spole (ingen differensialer) Girstigning: 32 pitch Styreservo: 2075X metallgir, digital høydreiemoment vanntett Radiosystem: TQ™ 2,4 GHz 2-kanals sender Batterirom Spesifikasjoner: 159 x 47 x 23/26 mm For mere info : Traxxas.com

Traxxas TRX-4 1/10 Crawler Ford Ranger XLT F150 ´79 RTR  Du trenger i tillegg: Lader til valgte batteri, vi kan anbefale SkyRC S100 NEO (må ha TRX ladekabel for konvensjonelle batterier) for ( iD batterier 2S - 3S ) Batteri med TRX kobling, vi kan anbefale disse: 2S 5200 - 2S 8000  (OBS ikke alle har TRX kontakt, velges i varianter) 4 x AA til Radio. Highlights: Autentiske skaladetaljer og realisme Malte karosserier med klare vinduer Skala 1,9" Canyon Trail-dekk™ på fabrikkfelger Portalaksler Enkelttrinns girkasse Spolelåste aksler TQ Radiosystem Lettere vekt, lav CG-ytelse TRX-4 Ford F-150 kombinerer den uslåelige bakkeklaringen og kjøredynamikken til Traxxas portalaksler, klebrige Canyon Trail-dekk™ og ett detaljert klikkløs karosseri. TRX-4 Ford F-150 er en slankere, ytelsesfokusert crawler designet for økt allsidighet. Med toppmodellen Ranger XLT-utstyr med kromdetaljer og krommede felger, løfter TRX-4 Ford F-150 dine terrengeventyr med stil. Hva som er i esken: TRX-4 Crawler XL-5 HV vanntett elektronisk hastighetskontroll Titan 21T Reversert motor TQ 2,4 GHz radiosystem Veddlikeholdsverktøy av høy kvalitet Navn: TRX-4 Ford F-150 Type: Trail Truck / Crawler Ferdighetsnivå: 1 Chassis: Utvidet stålstigeramme Skala: 1/10 Vekt: 2,63 kg Lengde: 566 mm Bredde: 249 mm Høyde: 241 mm Akselavstand: 336 mm Bakkeklaring i midten: 80 mm Drivlinje: Akseldrevet 4WD Girkasse: Entrinns girkasse Differensialtype: Spole (ingen differensialer) Girstigning: 32 pitch Styreservo: 2075X metallgir, digital høydreiemoment vanntett Radiosystem: TQ™ 2,4 GHz 2-kanals sender Batterirom Spesifikasjoner: 159 x 47 x 23/26 mm For mere info : Traxxas.com

AX31009 - 2-Speed Hi/Lo Servo Saver Set (AXIC3009) Servosaver set for Axial girveksel/Dig, servo innsatser for 23T-24T-25T + servo saver fjær. Inneholder: 1 stk servohorn 20mm 1 stk servohorn 13mm 3 stk innsatser 23T-24T-25T 1 stk Saver fjær • Genuine Axial molded plastic parts • Includes steel servo saver spring COMPATIBILITY

WL12427 4WD Across Rock-Racer 1/12 RTR (Green) WLToys Across er i 1/12-skala med 4WD, bilen kombinerer god fremkommelighet med holdbarhet og god toppfart. Leveres komplett med oppladbart LiIon-batteri og 2.4G rattradio. Bilen er 38cm lang og har en toppfart opp mot 40km/h. Det følger med lader så det eneste som trengs i tillegg her er 4stk AA-batterier til radioen. Morsom liten sak som fungerer utrolig bra, bilen er bygd opp av en plasttype som er veldig holdbar. Robust bil med tøffe detaljer og til og med fungerende LED lys inkludert, den har også ett ekstra fungerende reservehjul som enkelt skrus av ved behov for eventuellt bytte. Bilen har også Cvd akslinger foran og mellomaksel av solid plast med metall cvd, stiv bakaksel for realistisk oppførsel i terreng og gir en morsom torquetvist ved akselerasjon mot venstre. Dette er en bil til de som vil prøve ut denne hobbyen uten å måtte legge i alt for mye, her får du en pakke med komplett ferdigbygd bil, helt ok radiostyring, oppladbart Liion batteri og USB lader. Bilen kan brukes på 2S Liion eller *2S Lipo opp til 3000mah, det man må ta høyde for er lengde og bredde på batteri, batteriboksen tar batterier med opptil 95mm lengde, 40mm bredde og høyden kan være opp til 40mm men da med bruk av batteristropp.  *Ved bruk av større batteri for økning av kjørelengde må brukeren passe på at motor og regulator får tilstrekkelig med kjøling og pause mellom batteribytte.  Dette er ikke en nybegynnerbil da den i størrelse og fart tilsier at bruker bør være erfaren og ha tilsyn og opplæring av erfaren bruker. Specifikasjon Skala 1/12 Fysisk størrelse 42x24.5x18cm Max. Fart ca 40km/h Motor 540 Børstemotor Radio frekvens  2.4Ghz drives av 1.5V AA, 4stk (Ikke inkludert) Drivbatteri for bilen 7.4V 1500mAh Liion Batteri med Deans/T-Plugg Kjøretid ca 15 min Ladetid ca 3 t med medfølgende lader Rekkevidde radio ca 100m    Dette er ikke ett leketøy og anbefalt alder er 14+

AX31590 - Battery Tray Servo Mount Set SCX10II Batteriholder og servofeste for Axial SCX10ii COMPATIBILITY    • Molded plastic battery tray and servo mounting set • Includes steering servo posts and chassis mounted servo winch mounts • Includes tabs for battery placement options  • Two servo tabs feature cable routing guides • Genuine Axial Part

AXI232016 - Mounts & Servo Saver Set: Capra 1.9 UTB Dig Transmission Servosaver til dig med servofeste for bl.a Capra Capra™ dig transmission mounts and servo saver set. COMPATIBILITY

Tamiya 58686 1/10 R/C VQS (2020) Kit  AWAY! Dette byggesettet er en oppdatert re-lease versjon av en buggy fra 1988 fra Tamiya-katalogen, som er arvet fra den legendariske raseorienterte Avante. Den fremovervendte cockpiten-og den bakre vingen-er støpt i lett polykarbonat/lexan og ferdig malt svart, ferdigskåret med hull til karosserimonteringen for å spare på forberedelser. Det brukes en monokoque ramme i ABS-plast, med responsiv akseldrevet 4WD pluss et trippel differensialoppsett, firehjulsdobbelt hjuloppheng for mye mer-suveren terrengkjøring venter! Kulelagre:2stk 620 (2x6x2.5), 2stk 830 (3x8x3), 4stk 850 (5x8x2.5), 10stk 1150 (5x11x4), 1stk 1150 (5x11x4)  Thrust Bearing,  4stk 1680 (8x16x5) Capable Off-Road Chassis This model's durable ABS plastic monocoque frame protects vital R/C equipment and boosts suspension performance with its excellent rigidity. A total of three differentials are employed: small front and rear planetary gear differentials, and a center differential with ball thrust bearing; front and rear gearboxes also have maintenance hatches. Universal shafts front and rear ensure smooth, efficient drive and minimal worry about parts coming loose due to bumps and shocks, while the Avante-based 4-wheel double wishbone suspension employs plastic lower arms with threaded shaft upper arms that allow swift adjustment of camber. Front uprights are aluminum, and stabilizers are included for the front and rear.   ★The front double wishbone suspension employs aluminum uprights, while universal drive shafts are used front and rear. ★This image is a close-up on the three-piece steering tie rod setup. The center plate is crafted in 2mm carbon fiber. ★Reponsive shaft-driven 4WD is powered by a longitudinally-placed motor, with a ball differential in the drive gear.   ★Sealed gearboxes front and rear house compact planetary gear differentials which utilize the Avante design. ★The rear suspension setup features long, ball-mounted lower arms. Threaded upper arms (front and rear) allow adjustment of camber. ★The monocoque bathtub frame is a lightweight, durable design that protects and allows easy access to R/C equipment.   ★Left: Battery changes are made from the underside. The model is compatible with Tamiya 7.2V Racing Pack and LF2200-6.6V battery packs. ★Right: Lightweight 6-spoke wheels are paired with pin spike tires. Front wheels are narrow, and rear wheels are wide designs.   Specifications ★Length: 435mm, Width: 235mm, Height: 150mm ★Wheelbase: 275mm ★Tread: 200mm (Front & Rear) ★ABS Plastic Monocoque Frame ★Shaft-Driven 4WD ★Front & Rear Planetary Differential Gears, Center Ball Differential ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double-Wishbone Suspension ★Tire Width/Diameter: 31/88mm (Front), 38/88mm (Rear) ★CVA Oil Dampers ★Gear Ratio = 8.73:1 (using kit-standard 21T pinion gear) ★Type 540 Motor ★Electronic Speed Controller (ESC) is incl   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of November 25, 2020. Specifications are subject to change without notice.

AXI231001 - Wraith 1.9 Lower Rail Skid Plate, Battery Tray, Receiver Box Wrath1.9 Lower Rail/Skid Plate Battery Tray OVERVIEW  COMPATIBILITY

Tamiya 51543 Porsche 911 Carrera RSR Clear 1/10 Body Ulakket lexankarosseri fra Tamiya for 1/10 biler med 250-260mm hjulbase. Compatible with Tamiya TT-01, TT-01 Type-E and TT-02 chassis (short wheelbase) Molded polycarbonate construction ABS molded plastic side mirrors, black in color Stick sheet with body trim and sponsor logos SPECIFICATIONS Length: 445mm  Width: 190mm foran/200mm bak  Height: 106mm  Thickness: 1mm Wheelbase: 251mm INCLUDES Porsche Carrera 911 RSR Race Car Body, Side Mirrors, two Sticker Sheets, Window Mask, Hardware and Instructions

AX31317 - Axle Component Set RR10 • AR60 OCP differential cover • AR60 OCP differential output cover • Molded plastic • Includes two carrier bearing retainers, two lower link/shock mounts and servo mount • Compatible with AR60 axles COMPATIBILITY

7391 - Bronto Glødeplugg Forlenger med Krokodille Klype  

Tamiya 47461 TA02 1/10 Opel Calibra V6 1994 DTM Kit (limited edition) Du trenger i tillegg for å få komplett bil, radio/motaker/servo, batteri og lader, lexan lakk. Opel Calibra V6. Kommer som byggesett. TBLE-04S fartskontroller og 540 motor medfølger. Må kompletteres med: Radio og mottaker Servo NiMH eller LiPO batteri (må være round corner) Batterilader PS lakk Anbefales: Kulelagre: 2stk 1510 (10x15x4), 12stk 1150 (5x11x4), 6stk 850 (5x8x2.5), 2stk 1260 (6x12x4) Informasjon på engelsk: This is a R/C recreation of the Opel Calibra V6 that took part in the 1994 running of the Deutsche Tourenwagen Meisterschaft (DTM) series. Entered by Joest Racing, the car was powered by a 2.5-liter V6 engine and piloted among others by former Formula One champion Keke Rosberg. The Limited-Edition kit is an exact re-release of the original as it appeared in the mid-1990’s. TA-02 Chassis: The proven TA02 bath-tub chassis provides shaft-driven 4WD. 4-wheel double wishbone suspension is fitted with CVA oil dampers. Enclosed front and rear gear cases have built-in diff gears, with a ball differential in the rear. • 1/10 scale R/C model assembly kit. Length: 448mm, width: 185mm, height: 131mm. Wheelbase: 260mm. • Polycarbonate body, with separate parts recreating the side mirrors, wiper arms and rear wing. • The model utilizes the shaft-driven 4WD TA02 chassis, which is based around a durable bathtub frame. • Openable gearboxes house a front 3-bevel gear differential and rear ball differential. • The TA02 features 4-wheel double wishbone suspension and CVA shock-dampers for smooth, responsive handling. • White mesh type wheels are paired with slick tires. • Included in the kit are two big sticker sheets to recreate the various sponsors and other markings, plus masking stickers for use in the paint process. • Includes 540-brushed type motor. • Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. • Requires: 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger, and Tamiya PS polycarbonate paint for the body. NOTE: Battery pack must have the round stick pack form factor. Square shaped Li-Ion batteries do not fit the battery compartment.

AXI231005 - Skid Plate: Capra 1.9 UTB

AXI232009 - F9 Universal Axle Set (2): Capra 1.9 UTB Universaler for Capra 1.9 Currie F9 portal axle universals (for front axle). Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain. • Up to 45 degrees of steering • Smooth action for an efficient drivetrain • Compact yet durable design • Hardened steel construction Compatible Products  COMPATIBILITY Axial F9 Universal Axle Set (2): Capra 1.9 UTB AXI232009 is compatible with AXI03000T1, AXI03000T2, AXI03004

500907184 - SMD Led 1/14 PCB for Ekstralys 7.2V (2) Lyssterke Innsatser med SMD led for Carson ekstralys, ferdig loddet med ledning. Dim: 8.1x1mm (SMD led 1x1.9mm)

AX31385 - SCX10 II Side Plates (AXIC3185) SCX10 II radio box parts tree Molded plastic radio box/side plates Compatible with SCX10 and SCX10 II chassis Requires radio box sal kit AX31083 for water tight seal Radio box is integrated directly into the left side plate Genuine Axial part Axial Side Plates SCX10 II AXIC3185 is compatible with AXI03001T1, AXI03001T2, AXI03002, AXI90075, AXI90104, AXIC9046, AXID9047, AXID9058, AXID9059, AXID9060, AXID9066

Tamiya 47433 1/10 Toyota Supra Racing (A80) TT-02 Kit  Byggesett av Toyota Supra Racing (A80), du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Regulator (ESC) vi anbefaler denne 30120203 Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS)   Se anbefalt tilbehør under relaterte produkter.   LAKK Special Edition R/C Product 1/10 R/C Toyota Supra Racing (A80) (TT-02) Item No: 47433 Length: 452mm. Image shows painted and assembled kit.   Powerful Supra This R/C model assembly kit depicts a car based upon the fourth generation Toyota Supra (A80), a superbly stylish high performance car announced in 1993 that was a common sight in motorsports events. A polycarbonate body captures its form in style, with highlights such as hood air outlets and muscular fenders. Side mirrors and rear wing are separately molded parts, and carbon fiber pattern stickers are provided for the latter and the engine hood.   ★Left: Take a look at the muscular engine hood of the car. Carbon fiber pattern stickers add to the racy mood. ★Right: Race car-spec side mirrors come molded as separate plastic parts for further detail.   ★Left: Black six-spoke wheels with racing slick tires ensure that this model has a stylish air. ★Right: A big wing catches the eye at the rear of the model, with carbon fiber pattern sticker supplied.   TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Black 6-spoke wheels and slick tires make for a racy finish.   ★Left: Resin ball links in the steering linkage joints make for smooth, comfortable motion. ★Right: Stylish wheel hubs are designed to look like brake discs, giving your car another layer of realism.   ★Left: The motor cover includes removable cooling duct (not attached in above image). ★Right: This image shows the rear double-wishbone design suspension with friction dampers.   Specifications ★Length: 452mm, Width: 187mm, Height: 120mm ★Wheelbase: 257mm　★Tire Width/Diameter: 27/67mm (Front & Rear) ★Bathtub-type Frame ★Shaft-Driven 4WD ★Front/Rear 4-Bevel Resin Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front/Rear Friction Dampers ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-Channel R/C Unit with ESC ★Battery Pack & Charger ★R6/AA/UM3 batteries for transmitter Information is current as of March 9, 2020. Specifications are subject to change without notice.

Tamiya 53689 Motor 27T Brushed 540J Standard børstemotor fra Tamiya til bruk på f.eks M05 og M06 bilene, motoren passer godt til de fleste 1/10 touring biler med børstemotor. Motoren tilsvarer den samme som medfølger i Tamiya sine kit.  Spesifikasjoner: Turn : 27 Volt : 7.2-8,4V Ubelastet RPM med 7.2V : 14.500rpm Max Torque ved 7.2V : 255g-cm Strømtrekk med 7.2V : 7.9A

Tamiya 54393 380 Brushed 29T Sport-Tuned Motor Sport Tuned børstemotor fra Tamiya til bruk på f.eks RM-01,TA05 M-Four Chassis.  This is a new Type 380 Sport-Tuned Motor for RM-01 and TA05 M-Four chassis. When used with the model"s standard gear ratio, it offers a higher top speed and improved acceleration than Type 380-S motor (Item 51487).   Type 380 Sport-Tuned Motor x1 Pinion Adapter 2.3x3.17x12mm x 2 Pre-wired cables with standard connectors. Motor Shaft Diameter: 2.3mm Compatible with RM-01 and TA05 M-Four chassis machines. Note: Not compatible with Item 58470 Holiday Buggy (2010) & Item 58500 Sand Rover (2011). Ved bruk på Grasshopper med fast pinion kommer pinion i tillegg.

Tamiya 54860 T3-01 370 Brushed Sport-Tuned Motor   T3-01 Type 370 Sport-Tuned Motor Item No: 54860   ★This tuned motor is perfect for use with the R/C Dancing Rider, and offers dynamic drive. ★Input voltage: 6.6-7.2V ★RPM: 22,200 (at 7.2V) ★Maximum torque: 4.91mN-m ★Maximum usage: 2.85A Compatible Chassis T3-01 Chassis *Use with Item 54228 Fluorine Coated 06 Module Pinion Gear (26T, 27T), Item 54834 T3-01 Full Ball Bearing Set, Item 54857 T3-01 One-Piece Rear Axle Shaft Set and Item 54876 T3-01 Reinforced Differential Joint & Pinion Set. **Item 55105 LF1100-6.6V Racing Pack (M-Size) is required as a power source.. Information is current as of June 5, 2019. Specifications are subject to change without notice.    

Tamiya 58568 - 1/10  Neo Scorcher (TT-02B) Kit  Scorcher, en populær og rask 4WD-Buggy fra slutten av 1980-tallets Tamiya-serie, er tilbake, med nytt navn og oppdatert karosseri! Karosseriet er laget av slitesterk polykarbonat og med en stilig stor bakvinge, og har brukt originale Scorcher for inspirasjon, og kan dekoreres med et minimum av arbeide, takket være de store klistremerkene som følger med. Den bruker den lettmonterte akseldrevne 4WD TT-02B, og kombinerer chassisets kontrollerbarhet med firkantede knastedekk for overlegent grep på røffe overflater. Denne offroad-veteranen er tilbake med nye funksjoner for å banke rivalene dine! Det akseldrevne 4WD TT-02B buggychassiset bruker en “skid” formet ramme. Fjæringsoppsettet bruker 4-hjuls uavhengig dobbel bærearmfjæring med lange armer, pluss CVA-aksler, noe som gir bilen sikker håndtering, mens L/R-fjæringsarmer og oppheng er identiske for å lette en problemfri montering. Gearkassene foran og bak inkluderer 4-drevs differensialer for jevn drift, og er forseglet for å sikre at støv ikke kan komme inn. Toppen kan fjernes ganske enkelt ved å løsne 4 skruer, noe som gjør vedlikehold til en lek. 4 forskjellige utvekslingsforhold kan brukes ved bruk av 3 separat-solgte typer pinjonggir, slik at du kan matche egenskapene til biloppsettet til forholdene til enhver tid. Dette terrengchassiset inkluderer selvfølgelig også mottakerdeksel og motordeksel for å beskytte dem mot skitt og rusk som kastes opp fra banen. Behøves utenom som ikke er inkludert: 2-kanals fjernkontroll og mottaker Batteripakke: 7,2V Ni-Mh eller en 7.4V Lipo pakke (Round case) med Tamiya-kontakt (ikke inkludert) Lader Styreservo ESC Lakk/maling til bodyen Verktøy for montering Lakk/maling anbefalt av Tamiya: PS-16 Se anbefalt tilbehør under relaterte produkter. Length: 380mm. Image shows painted and assembled kit.   Burn through the off-road circuits! The Scorcher, a popular and speedy 4WD racing buggy from the late-1980s Tamiya line-up, is back, with a new name and updated body! Made from durable polycarbonate and featuring a stylish large rear wing, the body design drew heavily upon the original Scorcher for inspiration, and can be decorated with the minimum of fuss thanks to the large stickers included. It runs on the easy-assembly shaft-driven 4WD TT-02B, and marries the chassis' controllability with square spike tires for superior grip on rough surfaces. This off-road veteran is back with new features to scorch your rivals!   Shaft-Driven 4WD and Superior Handling from the TT-02B The shaft-driven 4WD TT-02B buggy chassis uses a skid-shaped frame. Its suspension setup uses 4-wheel independent double wishbone suspension with long arms, plus CVA shock units, giving the car assured handling, while left and right suspension arms and uprights are identical to facilitate hassle-free assembly. Front and rear gearboxes include 4-bevel differentials for smooth operation, and are sealed to ensure that dust can't get inside. The top can be removed simply by loosening four screws, making maintenance a breeze. Four different gear ratios can be applied with the use of three separately-sold types of pinion gears, allowing you to match the characteristics of your car setup to the conditions at any given time. Of course, this off-road chassis also includes receiver case and motor cover to protect them from dirt and debris thrown up off of the track.   4-wheel independent double wishbone suspension features long arms and CVA shock units. Reliable shaft-driven 4WD uses sealed F/R gearboxes for stress-free maintenance. Included receiver case keeps dust out.   Specifications ●Length: 380mm, Width: 250mm, Height: 145mm ●Wheelbase: 266mm　●Tread: 217mm (Front), 208mm (Rear)　●Bathtub-type Frame ●Shaft-Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Tire Width/Diameter: 32/82mm (Front), 41/82mm (Rear) ●Front/Rear CVA Oil Dampers ●Gear Ratio = 10.71:1 (using kit-included pinion gear) ●Type 540 Motor ●Electronic Speed Controller is sold separately.   Separately Required Items ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter Information is current as of July 31, 2013. Specifications are subject to change without notice.

WL-0056 - Komplett ESC for V1 WL12427-12429 Komplett Esc med innebygd motaker for bl.andre Across/Storm fra WL toys, ferdig loddet med alle kontakter på plass. Denne passer modell WL12427 og WL12429 før sept 2019 med lang antenne og slidebryter.

AXI232004 - Currie F9 Portal Axle Housing/3rd member FR: UTB Currie F9 portal axle housing (for front axle). Front axle housing Housing output and servo mount included COMPATIBILITY

AXSC-S01 - Brass Upgrade Parts Set For Axial SCX10 II Description: Brass upgrade combo for your Axial SCX10 II, upgrade to these parts to get more grip out of your tires! Brass also means sturdier than the original plastic parts. Comes with all required mounting hardware required to install this combo onto your truck!               *Photos for reference only.   Feature: For: Axial SCX10 II Material: Brass Color: Brass   Include: Yeah Racing (#AXSC-005) Brass C-Hub 2 pcs For Axial SCX10 II (1 pc) Yeah Racing (#AXSC-006) Brass Diff Cover For Axial SCX10 II (2 pcs) Yeah Racing (#AXSC-007) Brass Rear Axle Lock-Out 2pcs For Axial SCX10 II (1 pc) Yeah Racing (#AXSC-008) Brass Knuckle Arm 2pcs For AXIAL SCX10 II (1 pc)  

AXSC-008 - Brass Knuckle Arm 2pcs For AXIAL SCX10 II Svingarmer i messing for SCX10 II (2 x39gr) Description: Get more from your tires with this Brass made front knuckles by adding weight exerted onto your tires when compared to the stock plastic items! Easy to remember with etched weight on the side of the knuckle.       *Photos for reference only.   Feature: For: Axial SCX10 II Material: Brass Color: Brass   Include: Knuckle Arms (2 pcs) Mounting Hardware (1 pack)     PDF Datasheet 

AXSC-007 - Brass Rear Axle Lock Out 2pcs For Axial SCX10 II For SCX10 II i messing for uten one piece aksler.(2 x 27gr) Description: Get more from your tires with this Brass made rear lockouts by adding weight exerted onto your tires when compared to the stock plastic items! Easy to remember with etched weight on the side of the knuckle.       *Photos for reference only.   Feature: For: Axial SCX10 II Material: Brass Color: Brass   Include: Rear Axle Lock Out (2 pcs) Mounting Hardware (1 pack)     PDF Datasheet 

AXI232017 - Axial Wild Boar Standard Driveshaft Set 1 stk mellomaksel for 2 lengder. SCX10II + SCX10III, Capra UTB (Kun plastdelene) Innhold: Mellomstykke 49,5mm 1 stk, Mellomstykke 36mm 1 stk Hylse 33mm 3 stk, Hylse 26.5mm 1 stk Leddhylselås 4 stk Wildboar™ front and rear driveshafts feature an updated design WB Wildboar drtiveshaft set for the Axial UTB10 Capra, SCX10II, III

AXSC-005 - Brass C-Hub 2 pcs For Axial SCX10 II C-Huber (1x17g + 1x14g) for SCX10 II i messing for SCX10 II uten one piece aksler. Description: Get more from your tires with this Brass made steering knuckle by adding weight exerted onto your tires when compared to the stock plastic items! Easy to remember with etched weight on the side of the knuckle.       *Photos for reference only.   Feature: For: Axial SCX10 II Material: Brass Color: Brass   Include: Brass C-Hub (2 pcs) Mounting Hardware (1 pack)  

AX31384 - AR44 Differential Cover and Link Mounts (Red) AR44 differential cover Suspension link mounts Molded plastic (red) Compatible with AR44 axles Genuine Axial Part COMPATIBILITY

AX31331 - RR10 Rear Sway Bar Set (Soft) Designed for high speed this system will let you soften up your suspension for jumps, while keeping torque twist and body lean to a minimum during acceleration. A sway bar's main function is to control body roll, yet still allow your shocks to move vertically with the changing terrain. What does all this mean? It means more stability at high speed. A must have upgrade for any would be rock racer. Works with RR10 chassis Steel construction for durability Includes (soft) sway bar Optional sway bars available in soft, medium and firm set: AX31058  

PD2356 - K-Rock Parts Front Bumper,ST-1 Støtfanger foran K-Rock

PD7218 - Slipper Friction Ring K-Rock, Kaiser eMTA (2) Slipper ring for Thundertiger K-Rock og  Kaiser eMTA 1/8 elektro

PD7219 - Slipper Pad K-Rock, Kaiser eMTA (2) Slipper pad for Thundertiger K-Rock og  Kaiser eMTA 1/8 elektro

AX80037 - Interior Details Parts Tree - Black It’s all in the details! Now you can add that realistic look to any RC vehicle with the Axial detail kits available in black and chrome. 3 different steering wheels to choose from Armrests, door handles, and window roller handles  4 different styles of shifters, including: twin stick shifters and an aftermarket automatic style floor mounted shifter Gun rack to mount the included hunting rifle with scope and shotgun Includes mounting hardware   COMPATIBILITY

AX31569 - Tail Light Lens Jeep Wrangler CRC (Red) Lykteglass 5mm led bak til JW CRC We’ve upped the lighting game with these two-piece molded taillight housing; an inner piece that mounts to the inside of the body and an outer, red lens. LED lights can be fitted into the inner buckets to give your rig that rear red glow. Accepts 5mm bulbs (white or red)

AX31497 - Pin 2x20mm (6pcs) Genuine Axial factory hardware is built to last.      COMPATIBILITY

AX31575 - CRC JK Rear Fender Flares Officially licensed CRC raer fender flares. These molded plastic front fender flares add style and function to any scale off-road vehicle. Includes five button head screw per side that tie into a molded plastic backing to fully capture the polycarbonate body for strength and durability. The backing includes wire routing tabs to keep everything organized. Officially licensed CRC fender flares Molded plastic flare and inner backing Includes all required hardware Two flares per package Easy install   COMPATIBILITY

Tamiya 11825147 1/10 Boble karosseri WB 239mm Ulakkert/Uklippet boblekarosseri med lang hjulbase for M chassis, leveres UTEN karosseridetaljer, dekaler og maskering. Ferdig hullet for karosseristolper. Spesifikasjoner: Lengde : 370mm Bredde : 168mm Høyde : 125mm Hjulbase : 239mm

Tamiya 19005486 1/10 Boble Støtfangere for 11825147-58650-58572 H-J Parts Body fittings for Boble karosseri- Støtfanger foran og bak, frontlykter, speil, skiltlys.

AX31572 - CRC JK Front Fender Flares Officially licensed CRC front fender flares. These molded plastic front fender flares add style and function to any scale off-road vehicle. Includes five button head screw per side that tie into a molded plastic backing to fully capture the polycarbonate body for strength and durability. The backing includes wire routing tabs to keep everything organized. Officially licensed CRC fender flares Molded plastic flare and inner backing Includes all required hardware Two flares per package Easy install   COMPATIBILITY

AX80008 - Shock Parts Set AX10 COMPATIBILITY

Tamiya 47323 M-05-06 Mazda MX-5 Light Weight 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for M-03-05-06-07-08 biler SPECIFICATIONS Length: 335mm  Width: 172mm over hjul  Height: 118mm Wheelbase: 225mm INCLUDES  This is a lightweight version of the Mazda MX-5 body parts set. (Item 51583) for the popular M-05 M-chassis platform. Made from 0.8mm polycarbonate as opposed to the standard 1.0mm, it will give your car a lower center of gravity, thereby improving its performance. • The lightweight polycarbonate body accurately recreates the sleek MX-5 form. • Comes with separate injection-molded side mirror parts. • Stickers to recreate U.S., Japan and Europe version cars, plus masking stickers included. • Compatible with M-05, M-05 PRO, M-05 Ver.II PRO, M-05 Ver.II R, M-06, M-07, and M-06 PRO chassis.

Tamiya 51583 M-05-06 Mazda MX-5 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for M-03-05-06-07-08 biler SPECIFICATIONS Length: 335mm  Width: 172mm over hjul  Height: 118mm Wheelbase: 225mm INCLUDES Dette er et sett med karosserideler i klar polykarbonat til Mazda MX-5. Den er laget av 1 mm tykt polykarbonat. Settet inkluderer maskering for vinduene og et klistremerkesett for å fullføre den kompakte sportsbilen. Det sporty karosseriet er gjenskapt nøyaktig i slitesterk polykarbonat. Sprøytestøpte sidespeildeler er inkludert. Klistremerker for å gjenskape bilen fra USA, Japan og resten av verden, pluss maskering er inkludert.

Tamiya 51617 M-05 Citroën 2CV  Rally 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for M-03-05 biler SPECIFICATIONS Length: 383mm  Width: 172mm over hjul  Height: 142mm Wheelbase: 239mm INCLUDES  Citroën 2CV  Rally 1/10 Clear Body Set , Body parts for Rally, Sticker Sheets, Window Mask, Bodypins (8) and Instructions This is a spare body parts set of the Tamiya Citroën 2CV. It is made out of 1.0mm polycarbonate, making it very durable for road or rally racing. • Polycarbonate body is paired with separate bumper and side mirror parts, plus depictions of a recovery ladder and attachment bracket. • Marking stickers, plus masking stickers for use when painting included. • Compatible with M-Chassis cars

AX31586 WB8-HD Standard Driveshaft (AXIC0795) 1 stk mellomaksel for 2 lengder. SCX10II + SCX10III (Kun plastdelene) WB8 HD Wildboar™ front and rear driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.  3-piece driveshaft with strengthened slider-floater tube  Increased surface at the connection between the ball joints and output shaft tubes Adjustable length driveline parts included     COMPATIBILITY

Tamiya 51376 Mitsubishi Lancer Evo X Clear 1/10 Body Set Ulakket lexankarosseri fra Tamiya for 1/10 biler med 255-260mm hjulbase. This is the 1/10 scale Mitsubishi Lancer Evolution X Body from Tamiya. Fits Tamiya TT-01, TT-01 Type-E, DF-03Ra and TGS Chassis  Clear untrimmed polycarbonate construction Separate mirrors, rear wing molded in white plastic Front and rear light assemblies in chrome plated plastic SPECIFICATIONS Length: 443mm  Width: 187mm  Height: 114mm Wheelbase: 257mm INCLUDES 1/10 scale Mitsubishi Lancer Evolution X Body, mirrors, light assemblies, rear wing, window mask and body trim decals, mounting hardware and instructions

Tamiya 51476 - Toyota Celica GT-Four 1990 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for 1/10 biler med 255-260mm hjulbase. This is the spare body parts set of the Toyota Celica GT-Four 1990. The body may be mounted on any Tamiya 190mm wide 4WD or FWD chassis platform. SPECIFICATIONS Length: 434mm  Width: 189mm  Height: 110mm Wheelbase: 257mm

Tamiya 51608 - Toyota Yaris WRC Gazoo Racing 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for 1/10 biler med 255-260mm hjulbase. • The Yaris WRC body is made out of vacuum formed polycarbonate. Individual polycarbonate parts recreating front canards, front light cases and rear bumper blocks complete the package. • Separately molded plastic components depict rear wing and side mirrors. • Stickers are included to recreate markings, as are masking stickers for use when painting. • Compatible with 257mm TT-01, TT-02 and XV-01 chassis cars. SPECIFICATIONS Length: 410mm  Width: 189mm  Height: 130mm Wheelbase: 257mm

Tamiya 51615 Audi Quattro Rallye A2 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for 1/10 biler med 255-260mm hjulbase. This is a spare body parts set of the Tamiya Audi Quattro Rallye A2. It is made out of 1.0mm polycarbonate, making it very durable for road or rally racing. • Molded accurately in lightweight and durable polycarbonate. • Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing and wing caps are molded in white ABS. • Note: Light cases are compatible with separately sold LEDs; fog lamps are not. • Marking stickers, plus masking stickers for use when painting included. • Compatible with TT-01, TT-02 and XV-01 chassis cars. Notfor use with TT-02B-T SPECIFICATIONS Length: 430mm  Width: 190mm  Height: 113mm Wheelbase: 257mm

Tamiya 51708 - Toyota Celica GT-Four (ST165) 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for 1/10 biler med 255-260mm hjulbase. This is the spare body parts set of the Toyota Celica GT-Four (ST195). The body may be mounted on any Tamiya 190mm wide 4WD or FWD chassis platform. SPECIFICATIONS Length: 434mm  Width: 189mm  Height: 110mm Wheelbase: 257mm

AX80014 - Shock Cap Set Ax-10 Shock cap set Molded plastic shock caps Compatible with original AX10 shocks   OVERVIEW | COMPATIBILITY

500907383 - Carson 1/14 Sidemarkeringslys Henger Rød 7.2-14V (2) Innhold: 2 markerings lys, 2 motstander.   Lampe med klart glass for 7,2 til 42 volt. Plast med limt SMD LED. Dim. LxBxH: 8x4x1,2mm,  kabellengde omtrent 200 mm.

Linkestag for Wraith med rammemontert servo, kan også brukes som option på standard stag. (RESTESALG) D44 Link Set for Wraith CMS (Wraith Width) Specifications: CNC Machined Aluminum Weight: 1.23oz / 35g What's Included: 1x 164mm Bent Link (Black) 2x 76mm Links (Black) 6x M3 x 15mm SSS (Z-S0650) 6x M3 Medium Straight Plastic Rod End (Z-S0399) 1x M3 x 16mm BHCS (Z-S0656) 1x M3 x 12mm BHCS (Z-S0654) 1x M3 x 25mm FHCS (Black) Optional Parts: M3 Medium Straight Aluminum Rod Ends (Silver) (10) (Z-S1638) M3 Medium Straight Aluminum Rod Ends (Red) (10) (Z-S1640) M3 Medium Straight Aluminum Rod Ends (Blue) (10) (Z-S1642) M3 Medium Straight Aluminum Rod Ends (Black) (10) (Z-S1644) Notes: For more information on D44 Axles and parts, please click here. D44 Axle Information Page This link set is used to replace the link set on the CMS (Z-S0647) so you can fit the new D44 Axle Fits D44 Wide Front Axle (Wraith/AR60 Width) (Z-A0110) Instruction Manual: Detailed Assembly Click Here to download.

500907384 - Carson 1/14 Sidemarkeringslys Henger Klare 7.2-14V (2) Innhold: 2 markerings lys, 2 motstander.   Lampe med klart glass for 7,2 til max 14 volt. Plast med limt SMD LED. Dim. LxBxH: 8x4x1,2mm,  kabellengde omtrent 200 mm.

AX31396 - Winch Spool and Servo Mounts Vinsjspole for servovinsj, leveres for 23-24-25T splines. On-board servo winch mounting set Molded plastic Includes three different splined hub spools (23t, 24t, and 25t) depending on servo usage Genuine Axial Part

Tamiya 51545 GoPro Monster Super Swift Body M-Chassis 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for M-03-05 biler This is a clear polycarbonate body parts set of the GoPro Monster Sport Super Swift race car. It is made out of 1mm thick polycarbonate. The set includes masking seals for the windows and a sticker set to replicate the Go Pro Monster Sport Team livery. Includes separate parts to recreate rear wing, side mirrors and light cases. Set includes stickers to recreate the car’s racy markings.   SPECIFICATIONS Length: 350mm  Width: 170mm foran/170mm bak  Height: 120mm Wheelbase: 225mm  

500907385 - 1/14 Universal Printplate Led 6 kammer Set Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. Dette baklys settet kommer med 6 LED Beregnet for 7.2 volt, 1 par (1x venstre og 1x høyre side) SMD lysdioder, felles plus spol, 5 lysfunktioner, blinklys, bremselys, kjørelys + posisjonslys, ryggelys og tåkelys. Kabellengde på 500 mm. Egnet for art.nr. 500907038 (Baklys glasset er ikke med)

AX31243 - Slipper Pad 32.8x15.2x1mm (Aluminum) (2pcs) Aluminum slipper pads work by providing the right amount of slip for performance and heat resistance for durability. • 32.8 x 15.2 x 1mm (Aluminum) (2pcs)   OVERVIEW | COMPATIBILITY

Tamiya 51591 M-05 Mazda2 (Demio) 1/10 Clear Body Set Ulakket lexankarosseri fra Tamiya for M-03-05-06 biler   This is a spare body parts set of the Mazda 2. It is designed to fit on the Tamiya M-05 and M-05 VII chassis built on the long wheelbase configuration. (239mm) The spare parts package comes with a highly-detailed polycarbonate body, ABS plastic side mirrors, vinyl stickers, and window masking tape. The stylish and sporty form of the latest Mazda2 is recreated in clear polycarbonate. Separately molded parts are included in the kit to recreate side mirrors. Includes marking stickers, plus masking stickers for use when painting. Compatible with 239mm (L) wheelbase M-05, M-05 PRO and M-05 Ver.II PRO chassis cars. Requires Tamiya PS (Polycarbonate) paint to finish.  

500907387 - 1/14 Universal Printplate Led 7 kammer Set Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. Elektronisk 7.2 volt, 1 par (1x venstre, 1x høyre) er utstyrt med SMD lysdioder, felles pluss pol. 4 belysning funksjoner: blinklys, baklys, bremselys og rygge lys. Kabellengde ca 250mm. Egnet for art.nr. 500907037  (Baklys glasset er ikke med)

AX30461 - AX10/SCX10 Universal Joint Axle Shaft (2pcs) Turning angle up to 42 degrees  Heavy duty hardened steel construction No setscrews needed, cross pin held in place by aluminum ring Sold in set of two, why buy four when you only need two   COMPATIBILITY

Tamiya 51594 Body Set NSU TT - Jägermeister 1/10 Clear Body Ulakket lexankarosseri fra Tamiya for M-03-05-06 biler med hjulbase 239mm This is a complete spare body parts set of the NSU TT Jägermeister. The set includes the team livery sticker set, window masking tape, and plastic side mirrors. Set Contents Body is made of lightweight yet durable polycarbonate. Separately molded parts are included to depict side mirrors. Comes with stickers to recreate Jägermeister and other markings, plus masking stickers for use when painting. Compatible with L wheelbase (239mm) M-05, M-06 and M-07 Concept chassis cars.    

500907389 - 1/14 MAN Lysprint Led Baklys 7.2V Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. Koblingskjema                              MAN baklys for 7.2V, med lysdioder. Kabellengde 250mm. 4 lysfunktioner (Blink, bremselys, baklys og ryggelys). Passer Tamiya MAN TGX. Innhold: 1 sett (1 hver høyre og venstre bord).

AX04034 - 2012 Jeep® Wrangler Unlimited Rubicon Roof - .040” (Clear) Axial now offers an optional polycarbonate hardtop for the 2012 Jeep® Wrangler Unlimited Rubicon body. Fully licensed by Jeep®, this hardtop will let you change the look of your SCX10™ in just minutes. Hardtop is held in place my four self-tapping screws. The polycarbonate top can be painted to match your Jeep® body color, or black for that classic look. Officially licensed by Jeep® Fits all Axial 2012 Jeep® Wrangler Unlimited Rubicon bodies – Kit and RTR Manufactured from .040 thick clear polycarbonate  Includes mounting hardware, window mask and decals   COMPATIBILITY

500907391 - 1/14 MAN Lysprint Led Frontlys 7.2V Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. MAN front lykter  For 7.2V. Egnet for Tamiya MAN TGX 5 belysning funksjoner: Blink lys foran, markerings lys, kjørelys, fjernlys og tåke lys.  Kabel lengde ca. 200 mm. Innhold: 1 sett (1 hver venstre og høyre), monteringsutstyr og instruksjoner. Koblingsskjema:

AX80082  - Wraith Tube Frame Brace Set Wraith tube frame brace set Molded plastic Compatible with Wraith kit and RTR     COMPATIBILITY

500907393 - 1/14 Grand Hauler Lysprint Led Bak 7.2V Komplett lysprint for bakfanger på Grand Hauler 4 lysfunksjoner: Blink signal høyre + til venstre i rødt, 3markeringer i rødt / bremselys lysere, reverserende spotlight, farget strenget kabel med en lengde på ca 55cm Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V.

AX80091 - EXO, Yeti Bulkhead Differensialhus til Exo, Yeti og Score. EXO bulkhead  Molded plastic Compatible with front and rear   COMPATIBILITY

500907556 - 1/14 MB Actros/Arocs Lysprint Led Baklys 7.2V Merk: Ikke kompatibel med TAMIYA MFC da denne krever 7.2V strøm og MFC gir max 6.0V. Merzedes Benz baklys  – 7.2V. Passer Tamiya MB Actros/Arocs. 4  funksjoner: blinklys, kjørelys, bremselys og ryggelys. Kabel lengde på ca 500 mm. Innhold: 1 sett (1 venstre og 1 høyre ) Instruksjoner.