RC-BILER OG DELER

510138 - E5 - Hinge Pins Øvre Bærearm Bak (2) Hinge Pins for bærearmer øvre bak for E5 1/10

510153 - E5 - Wheelie Upper Mount

510158 - Chassis E5 MT/HX  (1) Understell/Chassis for E5

510185 -  E5 - Shims for Rear Wing (2 pcs)

510187 -  E5 - Rear Wing Support

5106A - Kulelager 15x24x5mm Gummitettet Sort (2)

5107A -  Ball Bearing 17x26x5mm, Black Rubber Sealed (2) Replacement part for these models: E-Revo® VXL Brushless Maxx® TRX-4® Equipped with Traxx® TRX-4® Traxx® All-Terrain Track Set X-Maxx®

5115 - Kulelager Gummitettet (5x10x4mm) (2)   SPECIFICATIONS Inside diameter: 3/16" (5mm) Outside diameter: 3/8" (10mm) Width: 5/32" (4mm)

5116 - Ball Bearings 5x11x4mm Rubber sealed (2) SPECS:    Inside diameter:      3/16"      (5mm) Outside diameter:     7/16"     (11mm) Width:                5/32"      (4mm) Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Chevrolet® Corvette® Stingray Drag Slash E-Revo® VXL Brushless Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck Ford® F-150 Raptor Ford® Fiesta® ST Rally Ford® GT Ford® Mustang GT Hoss® 4X4 VXL Jato® Nitro Slash Revo® Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slayer® Pro 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 Stampede® VXL Stampede® Summit T-Maxx® Toyota® GR Supra GT4® X-Maxx® Accessory part for these models: BIGFOOT® No. 1 Officially Licensed Replica Rustler® Stampede® Nitro Rustler®  

5117- Bearing 6x12x4mm blue rubber sealed  2p, ved utsolgt bestill 12163 Innv x utvendig x bredde Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Hoss® 4X4 VXL Revo® Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slayer® Pro 4X4 Stampede® 4X4 VXL Stampede® 4X4 Summit T-Maxx® XO-1® Accessory part for these models: Stampede® 4X4

5118 - Ball Bearings 8x16x5mm Blue Rubber Sealed (2)  Hpi-B085 er samme lager SPECIFICATIONS Inner Diameter: 8mm (0.31") Outer Diameter: 16mm (0.62") Thickness: 5mm (0.19")

5119 - Kulelager 10x15x4mm Gummitettet (2) Rubber-sealed ball bearings provide smooth, long-lasting and precise driving. Especially in dirt environments, rubber-sealed ball bearings provide the ultimate protection.

Ball Bearings 12x18x4mm Gummitettet (2) SPECS:    Outer Diameter: 18mm (0.70")           Inner Diameter: 12mm (0.47")           Thickness:       4mm (0.15") Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Chevrolet® Corvette® Stingray E-Revo® VXL Brushless Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Ford® GT Ford® Mustang GT® Hoss® 4X4 VXL Revo® Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slayer® Pro 4X4 Stampede® 4X4 VXL Stampede® 4X4 Summit Toyota® GR Supra GT4® XO-1®

5129 - Rep Sett Stål Drivakslinger E-Revo-Revo-E-Maxx-T-Maxx Gummibelger, Fett, Krysspinne og Ledd for CVD (Optionsakslinger 5451R) Rebuild kit (for Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx steel constant-velocity driveshafts) (includes pins, dustboots, & lube for 2 driveshafts assemblies)  

5131R - Susp.arms upper T-E-Maxx Suspension arms (upper) (2) (fits T-Maxx®/E-Maxx) Replacement part for these models: T-Maxx®

5132R - Suspension Arms Lower T-E-Maxx (2) 2 stk Nedre Bærearmer F/B T-E-Maxx 2,5-3,3 Replacement part for these models: T-Maxx®

Siver,skims for bærearms oppheng T-Maxx, kan også brukes på Revo

5136X -  Differensialoljesett 1x10K - 1x30K - 1x50K (1) Differensial olje i 3 forskjellige viskositeter, 1 flaske = 0.5DL, 10000WT-30000WT-50000WT Differential oil kit (50cc of 1 each: 10K, 30K, 50K weights) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. Accessory part for these models: Revo® 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Chevrolet® Corvette® Stingray E-Revo® VXL Brushless Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck Ford® Fiesta® ST Rally Ford® GT Ford® Mustang GT Hoss® 4X4 VXL Jato® Maxx® Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slayer® Pro 4X4 Sledge™ Stampede® 4X4 VXL Stampede® 4X4 Summit T-Maxx® Toyota® GR Supra GT4® Unlimited Desert Racer® X-Maxx® XO-1®

5141 - Turnbuckles/Toe Links Front 4x120mm (2) These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx FEATURES: Constructed of steel, polished natural finish INCLUDES: Two Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx. REQUIRES: Installing between wheel hubs and front bulkheads SPECS:    Length: 4.7" (120mm)           Diameter: 0.20" (5mm) 4mm tread COMMENTS: Fits only the 3.3 version of the T-Maxx.

5148 - Grease White Lithium Ypperlig smøremiddel for servodrev m.m This is a Tube of White Lithium Grease from Traxxas.         This product can be used to lubricate parts, such as gears. FEATURES: Great lubrication for nylon gears INCLUDES: One tube of lithium grease (volume unknown)ca 5g  

This is a pair of optional Center Driveshafts for the Traxxas E-Maxx. FEATURES: Outside U-joint is lubricated and sealed by a rubber boot to protect it from dirt and grime           U-joint pins are held captive by the ball bearings so you never have to worry about losing a pin           Traxxas metal CV shafts do not require you to limit your suspension travel INCLUDES: Two driveshafts with protective CV boots

5161 - Suspension Screw Pin Set Bolter for øvre/nedre bærearmer Traxxas T-Maxx To 59mm skrue bolter. Fire 73mm skrue bolter. To 65mm skrue bolter. Suspension screw pin set, hardened steel (hex drive) Replacement part for these models: T-Maxx®

5172 - Felg Split-Spoke Matt Krom (14mm) 3.8" (2) Wheels, SS (Split-Spoke) 3.8' (satin) (2) (fits Revo/Maxx series) 14mm hex  

5180 - Kulelager 6x13x5mm Gummitettet (2) SPECS:    Outer Diameter: 13mm            Inner Diameter: 6mm            Thickness:       5mm

5182A - Ball Bearing, Black Rubber Sealed 20x27x4mm (2)

5184 - Output Shaft Transmission 1p Nedre girkasseaksling T-Maxx 3,3 Classic

5196A - Ball Bearing, Black Rubber Sealed 20x32x7mm (2) Ett par 20x32x7 mm sorte gummitetningslager. Et skritt over blå-tetningslagere, svart-tetningslagere tilbyr en enda tettere tetning for ultimat beskyttelse og mindre vedlikehold i skitne miljøer.   Replacement part for these models: TRX-4® Equipped with Traxx® TRX-4® Traxx® All-Terrain Track Set X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®

5215- Clutch Bell 15T/Fiber Washer/E-Clip Revo (2) This is the stock replacement Clutch Bell for the Traxxas Revo Truck.          This is the gear that is installed on the engine crankshaft. FEATURES: Vented clutch bell           One piece bell design INCLUDES: One 15 tooth black vented clutch bell           Two 5x8x0.5mm fiber washers           One 5mm e-clip REQUIRES: Using the original 5x11x4mm clutch bell ball bearings

5229 - Shim sett Kjøletopp TRX 2.5 3 stk Shim i tykkelse 1x 0.15mm, 1x 0.25mm, 1x 0.35mm Ytterdiameter  : 21.18mm Innerdiameter : 14.98mm

5240 - End cap, carburetor body/ 6.2x1.2mm O-ring/ (1-each) (TRX® 2.5, 2.5R)

5245X - Pipeskjøt/Eksosforlenger,deflektor Silikon sort med strips Pipeskjøt Lengde: 24mm Pipeskjøt Inner Diameter, størst:   14mm  Pipeskjøt Inner Diameter, minst:   13mm  Pipeskjøt Ytre Diameter, størst:   25mm  Pipeskjøt Ytre Diameter, minst:   22mm  Deflektor Lengde:  61mm  Deflektor Inner Diameter, minst:  8mm  Deflektor Inner Diameter, størst: 10mm Deflektor Ytre Diameter, minst: 11mm  Deflektor Ytre Diameter, størst: 14mm

5274 - Backplate with O-Ring TRX 2.5/3.3 Hopp til slutten av bildegalleriErstatningsbakplate med 20x1,4 mm o-ring for TRX 2.5, 2.5R eller 3.3 nitro-motorer med startmotorer/snorstart

5280 - Start Kontroll Boks-Batteriholder TRX Erstatningsstarter-kontrollboks for EZ-Start 2-starteren. Krever 7.2V-batteri med Tamiyakontakt og Nimh-lader, selges separat.

5314 - Front/Rear Body Mounts w/Posts & Pins Revo Karosseristolper/fester foran/bak Revo/Summit/Slayer Pro Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1) Replacement part for these models: Revo Slayer Pro 4X4 Summit

5318 - Steel Pushrod 4x102mm Revo (2) This is the pair of Steel Pushrods for the Traxxas Revo. FEATURES: Metal pushrod construction           Plastic rod ends with hollow ball ends INCLUDES: (2) pushrods           (4) rod ends           (4) hollow ball ends SPECS:    Pushrod length end-to-end:      4-1/16"        (102mm)           Pushrod length between threads:  3-1/4"        ( 81mm)           Diameter of unthreaded section:   3/16"        (  5mm) Treads 4mm  

5321 - Steel Suspension Pin Set Revo Opphengsbolter foran eller bak Revo, består av 2 stk 3x85mm & 4 stk 3x24mm bolter. Replacement part for these models: E-Revo® VXL Brushless Revo Slayer Pro 4X4 Summit

5329 - Bulkhead bakre til Revo/Slayer Pro INCLUDES: Rear bulkhead halves Part #5329           (2) rocker shafts     Part #5354           (4) 4X14mm button head screws Bulkhead, rear (L&R halves)/ diff retainer, rear/ 4x14mm BCS (2) Replacement part for these models: Revo Slayer Pro 4X4  

5330 - Bulkhead Front Revo/Slayer Pro FEATURES: Black plastic construction           Rocker shafts preinstalled INCLUDES: Front bulkhead halves Part #5330           (2) rocker shafts     Part #5354           (4) 4X14mm button head screws Bulkhead, front (L&R halves)/ diff retainer/ 4x14mm BCS (4) Replacement part for these models: Revo Slayer Pro 4X4      

Right Fr Upper/Lower Suspension Arms Revo (2) Bærearmsett foran Revo/Summit øvre/nedre høyre Replacement part for these models: Revo® Summit

Left Fr Upper/Lower Suspension Arms Revo (2) Bærearmsett foran Revo/Summit øvre/nedre Venstre Replacement part for these models: Revo® Summit

5333R - Adjustable Wheelbase Suspension Arm Set Add an additional 10mm or 19mm of wheelbase extension to Revo, E-Revo and Summit in just minutes! Traxxas makes it easy by building the adjustment into the rear arms. Installation is a snap and the wheelbase can be quickly tuned trackside for any conditions. Select either 10mm or 19mm of extension by simply repositioning the pivot ball locations. Requires #5153R drive cups when using 5451R driveshafts. Replacement part for these models: Summit Accessory part for these models: Revo®

5334R - Axle Carrriers Left & Right/Bearing Adapters(2) Hjulhuber for Revo/E-revo, dette for både gammel og ny versjon med 6x13mm hjullager, er med adapter for eldre versjon med mindre hjullager (6x12mm). These are the Optional Axle Carriers L & R for                       use on the Traxxas Revo series. FEATURES: Nylon Construction           Black in Color           Allows for Oversized Bearing use INCLUDES: One Left Axle Carrier           One Right Axle Carrier           Four Dust Boot Retainers           Two Bearing Spacers Axle carriers, left & right (1 each) (use with larger 6x13mm ball bearings)/ bearing adapters (for 6x12mm ball bearings) (2)/ dust boot retainers (4)

5335 - Front Bumper & Mount Revo

5337 - Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic) Replacement part for these models: Revo® Slayer® Pro 4X4 Summit

5338 - Toe Link 4x129mm 5.0mm Steel Revo (2)  FEATURES: Steel turnbuckle design           5.0mm diameter for 4mm ball ends INCLUDES: Two front or rear toe links SPECS:    Length: 5.1" (129mm), Treads 4mm   Replacement part for these models: Revo® Summit  

53416 - Maskeringsark (Masking Seal) 2 stk 2 stk maskeringsark for å lage sine egne maler og for større vinduer o.l 240x200mm

Linkage, steering 3x50mm + rod ends (ca 62mm) Revo 3,3 + flere Linkage, steering (Revo®) (3x30mm turnbuckle) (2)/ rod ends (4)/ hollow balls (4)

5343X - Mount Steering Arm Steering Stops (2) This is the Steering Arm Mount for the Traxxas Revo. FEATURES: Black plastic construction           Standard and maximum throw steering stops INCLUDES: Steering arm mount                Steering stop                  

5345R - Servo horns, steering TRX Revo ++ These are the Steering Servo Horns and Turnbuckles                              from Traxxas. FEATURES: Nylon construction, black in color INCLUDES: Two long steering servo horns           Two short steering servo horns           Two 3x20mm turnbuckles Replacement part for these models: E-Revo® VXL Brushless Revo Slayer Pro 4X4 Summit T-Maxx XO-1®

5347 - Rod ends til Revo (Large) m kuler (12) passer alle TRX bilene som har disse + flere. Lange rod ends for 4mm stag Spesifikasjoner: Lengde : 30.9mm total  Bredde : 10.1mm Ø- kule : 5.8mm Innvendig kule : 3mm Høyde kule : 7.1mm   Replacement part for these models: 4-Tec® 2.0 Brushless AWD Chassis Bandit® VXL Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Ford® F-150 Raptor Ford® F-150® Raptor Nitro Slash Revo® Slash VXL Slash Slash® Brushless EHD Slash® Brushless Unassembled Kit Slash® Modified Slash® VXL Slash® Slayer® Pro 4X4 Summit T-Maxx® Accessory part for these models: Bandit® BIGFOOT® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Rustler® Brushless Rustler® Slayer® Pro 4X4 Stampede® Brushless Stampede®

5348 - Toe Link Rod Ends Revo 4x23mm (4) Rod ends for 4mm stag This is a set of Rod Ends for the Traxxas Revo.               They are to be used on the Rear Toe-Link Rods only. FEATURES: Plastic construction           Black in color INCLUDES: Four Rear Toe-Link Rod Ends REQUIRES: Assembly to vehicle SPECS:    Length:              23mm (.91")           Width at ball joint: 11mm (.43")   Replacement part for these models: Revo Slayer Pro 4X4 Summit Accessory part for these models: Slayer Pro 4X4 T-Maxx

5349 - Rod Ends 3x18mm korte m/kuler 6stk For 3mm skruer Length: .695" (18.4mm) Inner Diameter: .217" (5.5mm) Replacement part for these models: E-Revo® VXL Brushless Revo Slayer Pro 4X4

5351 - Slipper Pressure Plate & Hub Alloy Revo-E-Revo / T-E-Maxx Replacement part for these models: Revo Rustler® 4X4 VXL Rustler® 4X4 Slayer Pro 4X4 Summit T-Maxx Accessory part for these models: Ford Fiesta® ST Rally Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4  

5352A - Rep.sett til Slipper Clutch Traxxas Ombyggingssett, slipperclutch (stålskive / friksjonsklosser (3) / fjær (1) / 2x9,8 mm pinne / 5x8 mm MW / 5,0 mm NL (1) / 4,0 mm NL (1) Ombyggingssettet for slipperclutch inkluderer en ny stålskive, friksjonsklosser (3), fjær, pinne, 5x8 skive, 4 mm låsemutter og 5 mm låsemutter. Passer til 5351 trykkplate og nav. For bruk på modeller med "stor" slipperclutch Replacement part for these models: Revo® Slayer® Pro 4X4 Summit T-Maxx® Accessory part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Brushless Ford® Fiesta® ST Rally Jato® 4X4 Brushless Rustler® 4X4 Brushless Rustler® 4X4 Ultimate Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL EHD Slash® 4X4 VXL BIGFOOT® 4X4 Brushless Officially Licensed Replica Stampede® 4X4 Brushless

5352T - Heavy Duty Slipper Clutch Rebuild Kit Revo/Maxx (Erstatter 5352X-5352R) Dette er den store clutchen som sitter på flere av Traxxasmodellene, clutchene er de samme som på den mindre versjonen. FEATURES: Components for both nitro and electric Revo and Maxx trucks INCLUDES: Three aluminium friction pads, Steel Slipper Disc, two Locknuts, 2x9.8mm Pin,Locknuts, Spring, two Spring Washers and Instructions Passer ikke 2WD med liten Slipper disk, kun Padene passer. Replacement part for these models: Rustler® 4X4 VXL Rustler® 4X4 Accessory part for these models: Ford Fiesta® ST Rally Revo Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slayer Pro 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 Summit T-Maxx Ford Fiesta® ST Rally Slayer Pro 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4

5353 - 17mm Splined Wheel Nuts Anodized Blue (4) Dette settet med fire 17 mm blå aluminiumshjulmuttere er anodisert i blått for iøynefallende utseende med Traxxas holdbarhet. Passer de fleste med 17mm hexer. FEATURES: Aluminum construction, blue anodized in color INCLUDES: Four aluminum splined wheel nuts Replacement part for these models: Revo® Summit XO-1® Accessory part for these models: BIGFOOT® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Ford® Mustang® 5.0 Ford Fiesta® ST Rally Ford® F-150 Raptor Ford® F-150® Raptor Ford® Fiesta® ST Rally Nitro Slash Rustler® 4X4 Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless Slash® 4X4 VXL Slash® Brushless Slash® VXL Slash® Slayer® Pro 4X4 Stampede® 4X4 VXL Stampede® VXL Stampede® T-Maxx® Slash 4X4 Ultimate Slash® 4X4 Ultimate T-Maxx®

5353A - 17mm Splined Wheel Nuts Anodized Green (4) FEATURES: Aluminum construction, green anodized in color INCLUDES: Four aluminum splined wheel nuts  

5353X - Hjul mutter set splined 17mm (4) (blå) Disse kan brukes som ombyggingshub på T-Maxx & Revo modeller fra 14mm felghex  til 17mm hex, passer også flere andre merker. For 6mm stikkaksel med 5mm hjulmutter. FEATURES: Aluminum construction, blue anodized in color INCLUDES: Four aluminum splined wheel hubs and nuts  

5355 - Hollow Balls/Shims Revo FEATURES: Metal Construction           Silver and Black in Color INCLUDES: Four Silver Metal Hollow Balls           Four Black Metal Shims  

5356 - Rocker Arm set Long Travel (120-T)   This is a Long Travel Rocker Set for the Traxxas Revo + Summit 1/10. FEATURES: Gray plastic construction           "Long Travel" raised lettering on top of the rocker arms INCLUDES: (8) rocker arms, Part #5356 SPECS:    Length:         2"        (52mm)           Width:     1-1/16"        (27mm)           Height:      7/16"        (11mm) This rocker arm set must be used with TRX 5318, or TRX 5318X,  pushrod. Long travel rocker arms increase suspension travel to soak up the largest bumps and provide the plushest ride. Long travel rocker arms require new push rods (sold separately). Use push rods 5318 or 5318X.   Replacement part for these models: E-Revo Brushless E-Revo Revo Revo® Summit

5378X - Pivot Ball Caps (4) Dust Boots Rubber (4) Fire blå gummi ender for mutter Fire svarte festemuttere Fire blå mansjetter Fire blå festeklips Fire svarte festeklips Instruksjoner Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck) Replacement part for these models: E-Revo® VXL Brushless Revo Slayer Pro 4X4 Summit T-Maxx

5379x -  Ring gear, differential/pinion gear This is the Differential Ring Gear and Pinion for use with the Traxxas Revo 3.3 ++++ Front: Slash,Stampede,Rally FEATURES: Direct replacement part INCLUDES: One differential ring gear           One pinion gear Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Hoss® 4X4 VXL Revo® Rustler® 4X4 VXL Slash 4X4 Ultimate Slash 4X4 VXL Slayer® Pro 4X4 Stampede® 4X4 VXL Summit T-Maxx® XO-1® Accessory part for these models: Rustler® 4X4 Slash 4X4 Stampede® 4X4

5380 -  Housings, differential (front & rear) (1) This is the Front and Rear Differential Housing for the REVO and Slayer PRO from Traxxas. Replacement differential housing halves fits front or rear.   FEATURES Durable black nylon construction   INCLUDES One diff housing (2 pieces) Replacement part for these models: Revo® 53097 Slayer® Pro 4X4 59076

5381 - Diff Carrier/X-Ring & Ring Gear Gaskets Differensialhus og pakning til flere av modellene fra Traxxas Erstatnings deler til differensialhus som inneholder X-ring pakninger (2), kronhjul pakning, og 6x10x0.5 mm skive. INCLUDES: One Diff Carrier Two Blue Rubber Shaft Gaskets One Black Rubber Diff Carrier Gaskets One Gray Teflon Washer Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Chevrolet® Corvette® Stingray Factory Five '33 Hot Rod Coupe Factory Five '35 Hot Rod Truck Ford Fiesta® ST Rally Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Ford® GT Ford® Mustang GT® Hoss® 4X4 VXL Revo® Rustler® 4X4 Brushless Rustler® 4X4 Ultimate Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL Slayer® Pro 4X4 Stampede® 4X4 Brushless Stampede® 4X4 VXL T-Maxx® Toyota® GR Supra GT4®  

5381X - Steel Differential Spool Differensialsperre for bla. a Revo 1/10 Trucks   FEATURES Constructed of steel Installs in diff housing on either front or rear wheels   INCLUDES One Differential Spool for the Traxxas Revo with instruction sheet   SPECIFICATIONS Length: 2.3" (58.4mm)   COMMENTS Use only on off-road low-traction conditions to avoid damage to driveline components Accessory part(s) for these models: Revo 3.3 53097-3 Slayer Pro 4X4 59076-3

Drevsett differensial T/E-Maxx/Revo/Summit INCLUDES: Two Output Gears           Two Spider Gears           Spider Gear Shaft and Diff Carrier Support           Instruction Sheet Replacement part for these models: Revo® Slayer® Pro 4X4 Summit T-Maxx®

5383 - Drev sett 2-Speed Close Ratio Revo INCLUDES: One 40T 2nd speed gear           One 13T/16T input gear           One screw pin 3x14x2x9mm

5388 - Brake Cam/Sleeve Revo FEATURES:  Aluminum brake cam construction            Plastic brake sleeve construction INCLUDES:  One brake cam        Part #5388            One plastic sleeve   Part #5388 SPECS:    Brake cam length:      1-11/16"        (36mm)           Brake cam diamter:        3/16"         (4mm

5436 - Spring Shock GTR 2.9 Rate White (2) Standard foran på Revo Traxxas offers a wide variety of spring rates for the GTR shocks to precisely compensate for lighter or heavier truck configurations. The springs use high-quality spring steel with durable powder-coated finishes. Spring rate is indicated by colored dots on the end of the spring. Spring, shock (red) (GTR) (2.9 rate white) (1 pair)Wire diameter: 0.08" (2.1mm) SPECIFICATIONS Length: 1.8" (46mm)Outer diameter: 0.83" (21mm)

5440 - Spring Shock GTR Red 4.1 Rate Tan (2)   Traxxas offers a wide variety of spring rates for the GTR shocks to precisely compensate for lighter or heavier truck configurations. The springs use high-quality spring steel with durable powder-coated finishes. Spring rate is indicated by colored dots on the end of the spring. Spring, shock (red) (GTR) (4.1 rate tan) (1 pair) SPECIFICATIONS Length: 1-3/4" (44mm)Outer diameter: 0.83" (21mm)

5444 - Spring Shock GTR Red 5.9 Rate Blue (2)  Standard bak Revo Traxxas offers a wide variety of spring rates for the GTR shocks to precisely compensate for lighter or heavier truck configurations. The springs use high-quality spring steel with durable powder-coated finishes. Spring rate is indicated by colored dots on the end of the spring. Spring, shock (red) (GTR) (5.9 rate blue) (std. rear 120mm) (1 pair)Spring Rate: 5.9 SPECIFICATIONS Length: 1-11/16" (43mm)Inside diameter: 11/16" (17mm)Outside diameter: 7/8" (22mm)

5446 - Wing, Revo (black)/ decal sheet The Traxxas Revo wing and wing mount are the latest additions to the performance accessory line-up for the six-time National Champion Revo 3.3. The combination of the adjustable deflection angle, wing height, and the unique wing design allow tuning options for any track condition and driving style. The wing mount kit includes the mount, hardware, and installation instructions. The wing is available separately in white, black, or the new Exo-Carbon finish. FEATURES Plastic construction, black in color INCLUDES One rear wing with decals REQUIREMENTS Installation on the Revo 1/10 SPECIFICATIONS Length: 8" (203.2mm) Width: 3" (76.2mm) Replacement part for these models: E-Revo® VXL Brushless Accessory part for these models: Revo®

5450 - Half Shaft Set L&R FEATURES: Black plastic construction           Blue rubber shaft boots INCLUDES: Two half shaft assemblies SPECS:    Length: 120mm (4.7")  

1 stk komplett std drivaksel for  Revo 3,3 & T-Maxx 3,3, E-Revo V1, E-Maxx

5452X - U-joints Drivaxlar Set Ledd til EHD akslinger U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (10)/ 3x6x0.5 MW (8)) (metal parts for 2 driveshafts) INCLUDES: Four Steel Universal blocks           Four Steel Universal pins           Two black steel set pins           Four steel hinge pins           Four steel bearing pins           Eight 1.4mm e-clips

Yokes Stub Axle w/Pins (2) INCLUDES: Two yokes           Two drive pins

5454 - Stub axle (stål) (2) FEATURES: Steel construction INCLUDES: Two stub axles SPECS:    Length: 1.3" (33mm)

5455 - Center Front & Rear Half Shafts Drivakslinger midtdiff/girkasse foran bak til Revo, 1 foran, 1 bak. Ca lengde foran :   41mm Ca lengde bak : 61mm

5456 - Half Shafts Center (2) Drivaksling senter for Revo 3,3, E-Revo, T-Maxx

5457 - Yoke Brake w/Pins Revo 1 Bremsekobling( Yoke) 2 Bremse Pinner 1 Skrue Pin