FR-Sky Motakere

FrSky Archer Plus GR6 ACCES og ACCST D16 FrSky Archer Plus GR6 er en mottaker med ACCES og ACCST D16 protokol som også har black-box funksjon og enkelte basic flight data. Mottakeren har 6-innganger og SBUS inn- og out port. Denne utgaven kan også bindes med flere telemtrienheter som XACT servoer, ADV sensorer o.l. og IPEX4 ant. Størrelse 33x15x9.7mm Vekt 4.3g Spenning inn 3.5-10V Antall kanaler 6 High-precision PWM & 16 SBUS channels Mode 6 High-precision PWM & 24 SBUS channels Mode

Frsky X8R mottaker med 8 konvensjonelle kanaler og 16 SBUS kanaler Frsky RX8R Pro mottaker med 8 konvensjonelle kanaler og 16 SBUS kanalern, nå med lavere latency og høyere presisjon. Mottaker har ACCST V2.x.x-firmware. Krever V2 firmware på sender. (Alternativt kan den reprogrammeres tilbake til V1, gi oss beskjed.) Specifikasjoner Dimensjoner: 46.25 x 26.6 x 14.2mm (L x W x H) Vekt: 12.1g   An upgraded version based on the RX8R receiver, it has all the same features including redundancy. The Pro version has higher precision and lower latency. It?s deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high speed mode. A feature that deserves mention is the decreased effect of interference caused by the ignition process. Features Strong anti-interference performance in ignition process Higher precision of PWM Lower latency on the PWM output Support redundancy function Smart Port enabled and support telemetry data transmission Specifications Dimension: 46.3mm*26.6mm*14.2mm (L*W*H) Weight: 14.8g Numbers of Channels: 16CH(1-8CH PWM or 9-16CH PWM from conventional channel outputs, 1-16CH from SBUS port) With RSSI Output on Board: Analog DC 0-3.3V Operating Voltage Range: 3.5V-10V Operating Current: 100mA@5V Operating Range: full range (>1.5km) Firmware Upgradeable Servo Frame Rate: 9ms (HS?High Speed Mode)/18ms (FS?Normal Speed Mode) Compatibility: FrSky transmitters/transmitter modules in D8/D16 mode

Frsky V1 RX8R Pro Mottaker med 8 konvensjonelle kanaler og 16 SBUS  Frsky RX8R Pro mottaker med 8 konvensjonelle kanaler og 16 SBUS kanalern, nå med lavere latency og høyere presisjon. Mottaker har ACCST V1.x.x-firmware. Denne har V1 firmware på sender. Specifikasjoner Dimensjoner: 46.25 x 26.6 x 14.2mm (L x W x H) Vekt: 12.1g   Frsky V1 RX8R Pro Mottaker med 8 konvensjonelle kanaler og 16 SBUS  Features Strong anti-interference performance in ignition process Higher precision of PWM Lower latency on the PWM output Support redundancy function Smart Port enabled and support telemetry data transmission Specifications Dimension: 46.3mm*26.6mm*14.2mm (L*W*H) Weight: 14.8g Numbers of Channels: 16CH(1-8CH PWM or 9-16CH PWM from conventional channel outputs, 1-16CH from SBUS port) With RSSI Output on Board: Analog DC 0-3.3V Operating Voltage Range: 3.5V-10V Operating Current: 100mA@5V Operating Range: full range (>1.5km) Firmware Upgradeable Servo Frame Rate: 9ms (HS?High Speed Mode)/18ms (FS?Normal Speed Mode) Compatibility: FrSky transmitters/transmitter modules in D8/D16 mode

Frsky X8R mottaker med 8 konvensjonelle kanaler og 16 SBUS kanaler Denne motakeren kan kun brukes på V1 programvare, for bruk på V2 må motakeren oppdateres til ACCST V2.x.x-firmware. Number of Channels - 16CH (1-8ch from conventional channel outputs, 1-16ch from SBUS port or combine two X8R to become a 16 channels receiver)  Specs: Compatibility : FrSky DFT/DJT/DHT/DHT-U in D_mode / FrSky Taranis X9D/XJT in D8 mode / FrSky Taranis X9D/XJT in D16 mode Firmware Upgradable - Yes Weight - 12.1g Case - 46.25 x 26.6 x 14.2mm (L x W x H) Operating Range - full range (>1.5km) Operating Voltage Range - 4.0-10V Operating Current - 100mA at 5V

Frsky X8R-V2 ACCST mottaker med 8 konvensjonelle kanaler og 16 SBUS kanal Mottaker leveres med ACCST V2.x.x-firmware. Krever da V2 firmware på sender. Denne motakeren kan kun brukes på V2 programvare Number of Channels - 16CH (1-8ch from conventional channel outputs, 1-16ch from SBUS port or combine two X8R to become a 16 channels receiver)  Specs: Compatibility : FrSky DFT/DJT/DHT/DHT-U in D_mode / FrSky Taranis X9D/XJT in D8 mode / FrSky Taranis X9D/XJT in D16 mode Firmware Upgradable - Yes Weight - 12.1g Case - 46.25 x 26.6 x 14.2mm (L x W x H) Operating Range - full range (>1.5km) Operating Voltage Range - 4.0-10V Operating Current - 100mA at 5V

Radiomaster D16 R84 V2 4CH ACCST LBT Motaker Radiomaster R84 V2 kommer med D16 protokoll. Mottaker leveres med dual antenne og brukes i det meste av radiostyrte fly og annet radiostyrt med FrSky D16 ACCST V1 protokoll (MERK: kun kompatibel med ACCST D16 v1 protokoll fra multimoduler, ikke ACCESS D16 V2 i f.eks FrSky radioer). Kan også brukes i Multiprotokoll på Radiomaster fly og bilradio Innspening 4.5-8.4V Antenne type Dual Protokoll D16 V1 Vekt 2g Dimensjoner 17x11mm Antennelengde 6cm

FrSky L9R Mottaker Long Range LR12 Mode L9R Mottaker Long Range med opptil 12-kanaler, Merk at denne mottakeren ikke er kompatibel med V8, D8 eller D16-modus. Dette er en LR12-mode mottaker så utstyret den skal brukes med må være spesielt kompatibelt. FrSky L9R receiver features 12 available channels (9 via normal PWM outputs and all 12 channels on the dedicated Sbus output). What really makes this FrSky receiver stand out from the rest is the long range capabilities. How long? Testing shows it is reliably twice the range of FrSkys telemetry receivers, some claim more. And their telemetry receivers are well know for their range. How did FrSky do this? They did more then just rub some of the magical FrSky dust on it. They have been working on this receiver for a long time, and advanced filter makes this receiver work with a bone stock FrSky Taranis or FrSky XJT module. Yep, you heard it, nothing special is needed to double your range! Number of Channels: 12 Dimension: 34,65x 27 x 14.4mm Weight: 19g Operating Voltage Range: 4V-10V Operating TemperatureRange: -10°C~80°C Compatibility: FrSky X-series Module (XJT) etc. in LR12 mode (Switch 1 is OFF, Switch 2 is ON)FrSky Taranis X9D etc. in LR12 mode Note: The L9R receiver is not compatible with FrSky V8, D8, and D16 Mode. The LR9 is a non-telemetry receiver and does not support data hub or smart port functions. The Bind and fail safe setting procedures vary from previous X series receivers, please see the instruction manual for details.