Karosseri Buggy-Short Course-Drag

2417 - Karosseri Klar Lexan for Bandit 1/10 Blankt lexan karosseri ferdig klippet og hullet for 1/10 Traxxas Bandit Clear Bandit body includes front and rear canopy with wing and decal sheet. From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body and decals also come in the kit. Accessory part for these models: Bandit® VXL Bandit®

3714 - Karosseri Rustler 2WD 1/10 Ulakkert Klart lexan karosseri ferdighullet/klippet for Rustler 2WD Specs: Lengde : 400mm Bredde : 150mm Høyde : 110mm Hjulbase : 268mm   Body, Rustler (clear, requires painting)/window, lights decal sheet/ wing and aluminum hardware Accessory part for these models: Stampede® Rustler® VXL Rustler®

3726 - Karosseri Rustler 2WD 1/10 Llexan karosseri ferdighullet/klippet/lakkert for Rustler 2WD VXL *ProGraphix® (3726L må lakkeres.) *Fra mild til vill, velg dine egne farger for å tilpassekarosseriet ditt. Den detaljerte grafikken er ferdig malt, men resten av kroppen er klar, så du kan velge din egen hovedfarge på bodyet. Bare ta en boks med lexanlakk og spray den endelige fargen. Det er enkelt for alle å få umiddelbare, profesjonelle resultater. Traxxas ProGraphix-karosserier leveres fullstendig trimmet med forhåndsborede stolpehull for enkel installasjon. En beskyttende oversprayfilm påføres kroppen for enkelhets skyld. Vinge, vingemaskinvare og dekaler kommer også i settet. Specs: Lengde : 400mm Bredde : 150mm Høyde : 110mm Hjulbase : 268mm   Body, Rustler (clear, requires painting)/window, lights decal sheet/ wing and aluminum hardware Accessory part for these models: Stampede® Rustler® VXL Rustler®

5851P - Karosseri Short Course Slash 2-4WD Rosa-Lilla Er det på tide å oppgradere Slash® med et helt nytt utseende? Dette tøffe karosseriet har den hotteste ProGraphix-malingen® med forhåndspåførte dekaler. Det er ikke nødvendig å trimme karosseriet fordi Traxxas ferdigmalte karosserier er klare til montering rett ut av posen. Krever 6929 klippsløst konverteringssett når det brukes med 2WD Slash klippsløst Chassis eller 6928 klippsløst konverteringssett når det brukes med 4X4 klippsløst chassis. Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL Slash® Brushless Slash® VXL Slash®

6811X - Short Course Karosseri Pro Graphix 1/10 Short Course karosseri som passer mange 1/10 biler som Traxxas Slash 2-4WD, kan også tilpasses Arrma Senton Fra mild til vill, velg dine egne farger for å tilpasse karosseriet. Den detaljerte grafikken er ferdig malt, men resten av karosseriet er klart, så du kan velge din egen hovedfarge. Bare ta en boks med lexanlakk og spray den endelige fargen. Det er enkelt for alle å få umiddelbart, profesjonellt resultat. Traxxas ProGraphix-karosserier kommer ferdig klippet og hullet for enkel installasjon. Det er også påført en beskyttende oversprayfilm på kroppen. Dekaler følger også med i settet.  Krever clipless konverteringssett 6929 når det brukes med 2WD Slash clipless chassis eller clipless konverteringssett 6928 når det brukes med 4X4 clipless chassis. Spesifikasjoner: Lengde : 540mm Bredde Foran : 285mm Bredde Bak : 300mm Høyde : 145mm Hjulbase : 330-335mm   Replacement part for these models: Slash Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL Slash® Brushless Slash® VXL Slash®

6965 - Karosseri Slash 4x4 Klart for Klipsløs Feste Body, Slash® 4X4, heavy duty (also fits Slash® VXL & Slash® 2WD) (clear, requires painting)/ window masks/ decal sheet (requires #6967 latches and #6966 latch mounts for clipless mounting) This clipless heavy-duty clear Slash® 4X4 body is made from thicker polycarbonate than standard bodies for increased durability. From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Hobbynox paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed for easy mounting. There's also a protective overspray film applied to the body. Includes window masks and decal sheet. Clipless latches sold separately. Choose 6940 (Slash 2WD) or 6976 and 10125 (Slash 4X4) to mount the body. Accessory part for these models: Slash® 4X4 Ultimate Slash® 4X4 VXL Slash® Brushless Slash® VXL Slash®

ARA406162 - 1/8 Typhon TLR Rosa/Lilla Lakkert Buggykarosseri Lakkert karosseri for 1/8 Typhon TLR buggy, ferdig klipt og hullet. This high-quality polycarbonate TLR Tuned TYPHON pre-painted body shell is the perfect replacement for your kit item Includes 1 x TYPHON TLR Tuned Painted Decaled Trimmed Body (Pink/Purple)   Features Strong and flexible polycarbonate material for long-lasting performance Aggressive styling for awesome looks and advanced aerodynamic performance at high speeds Pre-painted race trim scheme for eye-catching looks Decorated in high-quality decals for added detail and realism Supplied pre-cut out for maximum convenience Pre-drilled body post and body clip retainer mounting holes for fast and easy fit

ARA406167 - Klart Trimmet Mojave 4s Karosseri med Dekaler Karosseri for Mojave 4S, ulakkert, klippet og med dekaler.

ARA412010 - 1-18 Mojave Grom Klart Karosseri  Ulakkert karosseri for Mojave Grom, her kan du sette ditt eget preg på din Mojave Grom Inkluderer 1 x Klart MOJAVE GROM Karosseri 1 x MOJAVE GROM Klistremerke Ark 1 x MOJAVE GROM vindusmaskeringsark Funksjoner Robust polykarbonat for økt slagfasthet og langvarig holdbarhet MOJAVE GROM vinyl dekalark inkludert for ekstra detaljer Forhåndskuttede vinylmaskering av høy kvalitet for rask og enkel vindusmaskering Forhåndstrimmet for rask og enkel passform Beskyttende oversprayfilm for rask og enkel tilpasset lakkering

HPI-114182 - DSX-2 Truck Painted Body (black/orange) Ferdiglakket og klippet karosseri for bl.a E-Firestorm Flux THIS PART FITS THE FOLLOWING KITS / PARTS: E Firestorm 10t Flux RTRSTD

HSP-20194 - Car Body - 1/10 Breaker

HSP-20195 - Car Body - 1/10 Breaker

HSP-20292 - Car Body - 1/10 Breaker

HSP-20293 - Car Body - 1/10 Breaker

LOS-1771 - Klart Lexan Karosseri & Vinge Micro-B This Clear Body & Wing Set for the Losi Micro-B includes a rear wing, body, factory sticker sheets, hook, and loop. In The Box (1) Clear Body with Rear Wing (1) Set of Factory Sticker Sheets Hook and Loop

PRO3238-62 - Baja Bug Clear Body Short Course FEATURES: Made from durable/genuine .060" (1.5mm) thick Lexan®           Classic VW® bug styling with Baja flair           Simulated rear engine detail just like the stock motor           Achieve a new look with optional add on spoiler           Paint-then-peel protective film INCLUDES: Clear VW® Baja Body           Spoiler           Spoiler mounting hardware           Decal Sheet           Window Mask SPECS:    Length: 19.3" (489mm)           Width: 7.5" (191mm)           Height: 6.0" (152mm)           Wheelbase: 12.5" (318mm)           Thickness: .060" (1.5mm) COMMENTS: Nerf bars will need to be removed if you want to run the Baja Bug            body           Tape inside of body at chassis sides to better protect against paint            damage

PRO335500 - Flo-Tek Clear Body Short Course for PRO-2 SC, Slash, Slash 4x4, SC10, XXX-SCT, Ten-SCTE, Ultima SC & Blitz Karosseri for Short Corse trucker, ikke lakkert og klippet. Description This is a Flo-Tek Clear Body for Slash®, Slash® 4X4, SC10, XXX-SCT, Ten-SCTE, Ultima SC and Blitz. Introducing the first SC body specifically designed to minimize the short-course body parachute effect! If you have ever raced or bashed a short-course truck, you know that SC bodies act like parachutes when going over jumps, causing you to lose control and crash. Pro-Line's new Flo-Tek SC body features futuristic styling coupled with large vent holes that allow air to flow through eliminating aerodynamic drag. The locations and size of the vents were designed to maximize air flow through the body while keeping the aggressive and high-tech look. Don't get caught in the wind while the competition passes you by Get Pro-Line's new Flo-Tek SC body today! Slash® is a registered trademark of Traxxas® L.P Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. Click Here for painting tips       Length:   21.5" (546mm) Width:   9.25" (235mm) Height:   6.0" (152mm) Wheel Base:   12.7" (323mm)   Fits: Traxxas® Slash Traxxas® Slash 4x4 Associated SC10 Associated SC10 4x4 Losi XXX-SCT Losi TEN-SCTE 4WD HPI Blitz Ultima SC Pro-Line PRO-2 SC 

PRO3408-00 - Ford F-100 Clear Body for PRO-2 SC, 2WD/4x4 Slash, SC10  (Requires Pro-Line Extended Body Mount Kit, Sold Separately) This is a 1966 Ford® F-100 Clear Body for SC trucks with extended body mounts. Now you can have your very own custom “Hay Hauler” with Pro-Line’s licensed 1966 Ford® F-100 body!  The ’66 F-100 body comes with perfectly scaled details like the step-sides and huge fender flares that will bring you back to the good old days. You can even create your own version of the Class 8 Desert Truck that dominated the desert in the 1980’s!  However you decide to detail your truck, the ’66 Ford body will turn heads and transform your SC into the best looking truck around.  Get your very own “Hay Hauler” body now! Don't forget to submit your finished Pro-Line body to Reader’s Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!  Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.  Ford Motor Company Trademarks and Trade Dress used under license to Pro-Line. SLASH® is a registered trademarks of Traxxas® L.P.   Features:  Licensed 1966 Ford F-100 body for SC trucks with Extended Body Mounts (sold separately) Old-School “Hay Hauler” looks Unmatched detail and realism Made from durable / genuine Lexan® Four steps to get your Body Ready:  1. Clean Body and apply included window mask 2. Paint then peel the over-spray film off 3. Sticker your body (decal sheet included) 4. Mount your new body onto your car Made in the USA, since 1982 – Read about Pro-Line Racing’s History   Included:   Clear Lexan® 1966 F-100 Body Decal sheet Window masks included Paint-then-peel overspray film included   Fits:   Traxxas® Slash® (with Pro-Line Extended Body Mount #6070-00, sold separately) Traxxas® Slash® 4x4 (with Pro-Line Extended Body Mount #6087-00, sold separately) SC10 2WD (with Pro-Line Extended Body Mount #6071-00, sold separately) Pro-Line PRO-2 SC   Specs:   Length:   20.3" (516mm) Width: at doors   9.4" (239mm) Height:   6.5" (165mm) Wheel Base:   12.7" (323mm)

PRO3419-00 - Desert Raid Clear Body for PRO-2 SC, Slash, Slash 4x4 and SC10 (Requires Pro-Line Extended Body Mount Kit, Sold Separately) This is a Desert Raid Clear Body for SC trucks. Are you tired of the same old body style on your Short Course Truck and want something truly unique? Pro-Line’s all new Desert Raid body brings the looks and performance of extreme SUV desert racing right to your truck and brings new life to your old SC truck. The Desert Raid body features flowing SUV body lines for the correct off-road look and large fender flares for maximum tire clearance. The Desert Raid body also has Flo-Tek Technology built in with large air vents in front and rear to keep air from being caught under the body for the best jumping performance possible. If you are a fan of desert SUV racing then Pro-Line’s new Desert Raid body is a must! Get yours today! Please note: All bodies are sold in crystal clear Lexan® and are painted for advertising purposes only. Click Here for painting tips Features: Unique Desert SUV body styling Large Fender Flares for maximum tire clearance Flo-Tek Technology reduces parachute effect Made from durable / genuine Lexan® Extended Body Mounts are required Four steps to get your body ready to Raid the Desert:  1. Clean Body and apply included window mask 2. Paint then peel the over-spray film off 3. Sticker your body (decal sheet included) 4. Mount your new body onto your truck Made in the USA, since 1982 – Read about Pro-Line Racing’s History   Included:   Desert Raid Clear Body (1 pc) Decal Sheet Window Masks Paint-then-peel overspray film included   Fits:   Pro-Line PRO-2 SC Traxxas® Slash® (with Pro-Line Extended Body Mounts) Traxxas® Slash® 4x4 (with Pro-Line Extended Body Mounts) Associated SC10 (with Pro-Line Extended Body Mounts)   Specs:   Length:   20.2" (513mm) Width:   10.0" (254mm) Height:   6.3" (160mm) Wheel Base:   12.8" (325mm)

PRO3423-00 - 1981 Ford Bronco Clear Body for PRO-2 SC, Slash, Slash 4x4 and SC10 (requires extended body mount kit) This is a 1981 Ford Bronco Clear Body. It is time to man up and go REAL with Pro-Line’s new 1981 Ford Bronco body for Short Course Trucks! Pro-Line now gives you the option to convert your Slash® and SC10 Short Course Truck into a True Scale old school Bronco that is popular among full scale off road racers. This Bronco body is perfect for making your friends jealous and giving your Truck a completely different look! Don’t show up to the local bash spot or track with the same body as everyone else… Get your True-Scale 1981 Ford® Bronco body from Pro-Line today! *Note: This body requires extended body mounts for proper body fit*  See Fits tab for more details.  Ford Motor Company Trademarks and Trade Dress used under license to Pro-Line. Slash® is a registered trademark of Traxxas® L.P. Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. Click Here for painting tips  Features:   Licensed 1981 Ford Bronco Scale Looks Transforms your Slash® and SC10 into a True Scale Bronco Recreate the look of a Full Size Off Road Racer Made with Crystal Clear Genuine GE Lexan® Four step to Bash Ready:  1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off  3.) Sticker your body (decal sheet included)  4.) Mount your new body onto your truck Made in the USA, since 1982 - Read about Pro-Line Racing’s History   Included:   1981 Ford Bronco Clear Body (1 pc) Window templates Decal Sheet   Fits:   Traxxas® Slash® (with Pro-Line Extended Body Mount kit #6070-00, sold separately) Traxxas® Slash® 4x4 (with Pro-Line Extended Body Mount Kit #6087-00, sold separately) SC10 2WD (with Pro-Line Extended Body Mount Kit #6071-00, sold separately) Pro-Line PRO-2 SC   Specs:   Length:   20.75" (527mm) Width:   11.63" (296mm) Height:   6" (153mm) Wheel Base:   13" (331mm)    

PRO3461-00 - 2017 Ford F-150 Raptor True Scale Clear Body for PRO-2 SC, Slash, Slash 4X4, SC10 (Requires Pro-Line Extended Body Mount Kit, Sold Separately) This is a 2017 Ford F-150 Raptor True Scale Clear Body for Short Course Trucks. Introducing one of the most anticipated Truck bodies of all time: the all-new 2017 Ford® F-150 Raptor True Scale truck body for Short Course! Pro-Line has included all the scale detail into the body and sticker sheet for a highly detailed yet functional replica of the unreleased 2017 Raptor. The 2017 Raptor has a bold and tough body style that is the most cutting edge look available. This body completely transforms your PRO-2, Slash®, or SC10 Short Course Truck into a True Scale Lifted Truck. If you are a Raptor fan, then this is the body for you! Be the envy of your friends.. Get your Pro-Line 2017 Ford® F-150 Raptor True-Scale body today!   Readers’ Choice Award Winning Body Design Click Here for painting tips  Ford Motor Company Trademarks and Trade Dress used under license to Pro-Line. Slash® is a registered trademark of Traxxas® L.P. Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only. FEATURES:   Licensed 2017 Ford® F-150 Raptor Scale Looks Transforms your PRO-2, Slash® and SC10 into a Tough Lifted Truck Made with Crystal Clear Genuine GE Lexan® Requires Extended Body Mount Kit (Sold Separately) Four step to Race Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your truck Made in the USA, since 1982 - Read about Pro-Line Racing's History   INCLUDED:   2017 Ford® F-150 Raptor True Scale Clear SC Body (1 pc) Window Masks Sticker Sheet   FITS:   Pro-Line PRO-2 SC Truck TRAXXAS® Slash (Requires Pro-Line Extended Body Mount Kit #6070-00, sold separately) TRAXXAS® Slash 4x4 (Requires Pro-Line Extended Body Mount Kit #6087-00, sold separately) AE SC10 (Requires Pro-Line Extended Body Mount Kit #6071-00, sold separately)   SPECS: Length:21.65" (550 mm) Width:9.44" (240 mm) Height:6" (152 mm) Wheel Base:13" (330 mm)

PRO3514-00 - 1956 Ford F-100 Pro Touring Street Truck SC Clear Body Prostreet ulakkert karosseri for ShortCourse Truck, Slash 2-4WD + flere Length:   21.8" (554mm) Width (at doors):   9.3" (236mm) Width (at fenders):   12.6" (320mm) Height:   7.0" (178mm) Wheelbase:   12.8" (325mm) Slash® 2wd (with 2.8" Wheels and Extended Body Mount kit #6070-00 sold separately) Slash® 4x4 (with 2.8" Wheels and Extended Body Mount Kit #6087-00 sold separately) Rally (with 2.8" Wheels and Extended Body Mount kit sold separately) Pro-Line PRO-Fusion SC 4x4 (with 2.8" Wheels and Extended Body Mount kit #6070-00 sold separately) This is a 1956 Ford® F-100 Pro-Touring Clear Body for Short Course. Do you have the need for speed? Then check out Pro-Line's new Ford® F-100 Pro-Touring body designed for slammed retro street truck racing! This old-school F-100 Pro-Touring body features incredible scale details while being proportioned to fully cover the tires of your Short Course truck. Combine the body with Pro-Line's 2.8" Road Rage Tires mounted on F-11 2.8" Wheels to get the ultimate in scale retro street style and performance. The Ford® F-100 Pro-Touring body is a single cab truck with the iconic old-school grill, headlight and taillight detail that you have come to expect from Pro-Line. The body even has a built-in rear spoiler! Transform your Short Course truck into a true street killer with the new Pro-Line Ford® F-100 Pro-Touring body today! Don't forget to submit your finished Pro-Line body to Reader's Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize! *This body requires extended body mounts for proper body fit* http://www.prolineracing.com/extended-body-mounts-sc/ Note: This body is wider than a usual short course body and the track width needs to be adjusted to fit your kit. 2.8" Street setup - If you have stock arms, use the Stampede® 4x4 offset 2.8" wheels. If you have ProTrac arms, use the Electric Stampede® Rear 2.8" Wheels Street tires available: Prime 2.8” 2.2"/3.0" Street setup - If you want to use standard short course wheels and tires you will need to have ProTrac arms (or arms that are 103mm in length) and pair with Slash® Rear Wheels (not ProTrac) to increase the track width of your truck. This will push your wheels out to match the width of the fenders. Street tires available: Street Fighter SC or Prime SC 2.2"/3.0" tires.    Ford Motor Company Trademarks and Trade Dress used under license to Pro-Line. Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only. Click Here for painting tips Slash® is a registered trademark of Traxxas® L.P   Retro Slammed Street Truck Styling Incredible Licensed 1956 Ford® F-100 Scale Details Fully Covers the Tires of your SC Truck Paint Then Peel Overspray Film Included Made with Crystal Clear Polycarbonate Four steps to Bash Ready: 1.) Clean Body and apply included window mask 2.) Paint then peel the over-spray film off 3.) Sticker your body (decal sheet included) 4.) Mount your new body onto your truck Made in the USA, since 1982 - Read about Pro-Line Racing's History

PRO3531-00 - 1/10 1969 Chevrolet Nova Clear Body: Drag Car Tidløse Chevy® Malibu™- karosseri fra 1978 spesielt designet for den voksende No-Prep SC Drag Racing-interessen! Bowtie-fans vil elske denne ultraskala bodyen som fanger alle signaturdetaljene til Mark Mickes 4700 hk, twin-turbo, 200 mph+ G-body Malibu™. Forvandle din Losi® 22S™ No Prep Drag Car, Slash® 2wd eller AE DR10 til et skala 1/4-mile beist i retro-klassisk firkantet karosseristil Fullt lisensiert 1978 Chevy® Malibu™ Perfekt for No-Prep Drag Racing Utrolig kopi av Mark Mickes 1:1 Malibu™ Drag-bil Valgfritt tilleggsspoiler bak med maskinvare inkludert Laget av slitesterk polykarbonat (1) 1978 Chevy Malibu Clear Body og Spoiler (1) Maskinvare for bakspoiler (1) Detaljert dekalark (1) Sett med vindusmaskering Spesifikasjoner Lengde: 25,5" (647 mm) Bredde foran: 11,4" (289 mm) Bredde bak: 11,6" (295 mm) Høyde: 6,1" (156 mm) Akselavstand: 13,0" (330 mm)    Bildet viser ferdig klippet og lakkert body på chassis.  General Motors varemerker brukt under lisens til Pro-Line.

PRO3549-14 - 1/10 1978 Chevrolet Malibu Lakkert Grått Body: Drag Car Tidløse Chevy® Malibu™- karosseri fra 1978 spesielt designet for den voksende No-Prep SC Drag Racing-interessen! Bowtie-fans vil elske denne ultraskala bodyen som fanger alle signaturdetaljene til Mark Mickes 4700 hk, twin-turbo, 200 mph+ G-body Malibu™. Forvandle din Losi® 22S™ No Prep Drag Car, Slash® 2wd eller AE DR10 til et skala 1/4-mile beist i retro-klassisk firkantet karosseristil Fullt lisensiert 1978 Chevy® Malibu™ Perfekt for No-Prep Drag Racing Utrolig kopi av Mark Mickes 1:1 Malibu™ Drag-bil Valgfritt tilleggsspoiler bak med maskinvare inkludert Laget av slitesterk polykarbonat (1) 1978 Chevy Malibu Body og Spoiler (1) Maskinvare for bakspoiler (1) Detaljert dekalark (1) Sett med vindusmaskering Spesifikasjoner Lengde: 25,5" (647 mm) Bredde foran: 11,4" (289 mm) Bredde bak: 11,6" (295 mm) Høyde: 6,1" (156 mm) Akselavstand: 13,0" (330 mm)    Bildet viser ferdig klippet body på chassis.  General Motors varemerker brukt under lisens til Pro-Line.

PRO3550-00 - 1/10 1972 Plymouth Barracuda Clear Body: Drag Car Den ikoniske Plymouth Barracuda-bodyen fra 1972 spesielt designet for den voksende SC Drag Racing-interessen! Denne ultraskala bodyen fanger alle signaturdetaljene til den ikoniske 'Cuda, perfekt for No-Prep Drag Racing. Den inkluderer et omfattende dekalark med Hemi kvartpanel-livry-grafikk og valgfri tilleggsspoiler. Forvandle din Losi® 22S™ No Prep Drag Car, Slash® 2wd eller AE DR10 til et skala 1/4-mile beist i retro-klassisk firkantet karosseristil!  Fullt lisensiert 1972 Plymouth Barracuda Perfekt for No-Prep Drag Racing Utrolig skaladetaljer med kroppsdesign i ett stykke Valgfritt tilleggsspoiler bak med maskinvare inkludert Inkluderer Hemi Quarter-Panel Livery Graphics (1) 1972 Plymouth Barracuda Clear Body og Spoiler (1) Maskinvare for bakspoiler (1) Detaljert dekalark (1) Sett med vindusmaskering Karosseriet selges som en klart og ulakkert karosseri. Bildet av det lakkerte karosseriet er kun for å vise detaljer. Ingen chassis følger med dette produktet. Spesifikasjoner Lengde: 23,0" (584 mm) Bredde foran: 11,0" (279 mm) Bredde bak: 11,5" (292 mm) Høyde: 5,9" (150 mm) Akselavstand: 13,2" (335 mm)     Bildet viser ferdig klippet og lakkert body på chassis.  Chrysler, Plymouth og relaterte logoer, navn på kjøretøymodeller og merkeklær er varemerker for FCA US LLC og brukes under lisens av Pro-Line. © 2022 FCA US LLC.          

PRO3572-00 - 1/10 1972 Ford Pinto Clear Body (11.25" Wheelbase): Buggy Drag Car Pro-Line er klar til å bryte standarden igjen med en helt ny vri på dragracing. Vi introduserer den første kompaktbilen som Ford noensinne produserte som ble en ikonisk Pro Stock-bil fra 70-tallet i racing i full størrelse: 1972 Ford®® Pinto! For å gjøre Pinto så skala som mulig i forhold til Pro-Lines andre Drag Bodies, lanserer Pro-Line en ny subcompact dragklasse ved hjelp av Bandit® (med PRO607000 karosserifester), AE SR10 eller andre 11.25" akselavstand 2wd Buggies utstyrt med drag racing hjul og dekk. Denne nye størrelsen åpner døren for å bringe nye rc intresserte inn i dragracingverdenen ved hjelp av en chassisplattform som mange allerede eier. Alle de ikoniske detaljene fra den originale 1972 Pinto har blitt nøyaktig gjenskapt i 1/10 størrelse som ser utrolig tøfft ut med store draghjul. Fronten av karosseriet har massive detaljer, inkludert den klassiske sekskantformede grillrammen, akkurat som bilen i full størrelse, som bare er mulig med Pro-Lines proprietære støpeteknologi. Karosseriet kommer ulakkert og gir deg muligheten til å lakkere slik du ønsker. Hvis du er en Pinto-fan eller er klar til å prøve noe annet, så er dette en må-ha-karosseri for deg! Få ditt eget 1972 Ford Pinto-karosseri® i dag! *Dette karosseriet krever lange karosserifester for riktig kroppstilpasning på din Bandit®* Offisielt lisensiert av Ford® Utrolig detaljert gjenskaping av 1972 Pinto Laget i USA, siden 1982 Laget av slitesterkt/ekte .040" klart polykarbonat Massivt innfelte front- og frontlysdetaljer muliggjort av Pro-Lines avanserte støpeteknologi (1) 1972 Ford Pinto klart karosseri (1) Maling-så-peel Overspray Film (1) Detaljert dekalark (1 sett) Vindusmaskering Lengde: 508 mm (20,0 tommer) Bredde foran: 11,0 tommer (279 mm) Bredde bak: 285 mm (11,125 tommer) Høyde: 5,75 tommer (146 mm) Akselavstand: 11,25 tommer (286 mm)  Bildet viser ferdig klippet og lakkert body på chassis.    Ford Motor Companys varemerker og kjennetegn brukt under lisens til Pro-Line.    

PRO370300 - VW Baja Bug Clear 1/28 Body Klart lexankarosseri for bl.a Losi Micro T ill.foto

Tamiya 10335062 - Karosseri Grasshopper1 Hardplast Karosseri ulakkert i hvit plast (kun body)

Tamiya 10335080 - Karosseri Lunchbox Hardbody Ulakkert PS plast karosseri for Lunch box

Tamiya 10555112 - Karosseri og Vinge 58391-84265 Karosseri lexan for Hot Shot 58391 Hotshot - 1/10 Re-Release Chassis:  Hotshot Release date:  18 Jul 2007 84265 Hotshot (2007) Metallic Special Chassis:  Hotshot Release date:  24 Dec 2011  

Tamiya 11825407 - Blankt Lexan Karosseri for The Frog 58354  Blankt uklippet lexan body for Tamiya THE FROG (uten dekalsett)   Parts compatability according to Tamiya Guide Books and Tamiya Manuals. 58354 The Frog (2005) Chassis: ORV Release date: 14 Dec 2005

Tamiya 19335576+19005086 - Karosseri og Interiør for Holidaybuggy Karosseri og Interiør/Eksteriør (A-Parts) for 54870-58023 Holiday Buggy

Tamiya 19335773 - Karosseri Grashopper II Hardbody Ulakkert PS plast karosseri for Grashopper II

Tamiya 19335891 - Karosseri, Paneler BBX Blankt lexan body for BBX

Tamiya 19804558 - Karosseri og Vinge Super Hot Shot Utrimmet og ulakkert karosseri for flere av Hot Shot bilene (Dekaler kommer i tillegg.)

Tamiya 19805020 - Hornet Klart Lexan body med Vinge Ulakkert lexan karosseri med vinge for Tamiya Hornet 58045/58366, leveres uten maskering og dekaler.

WL1335G - Karosseri Blå/Grønn 1/14 for RSR Buggy 144001 (1) Lakkert,Hullet og Klippet karosseri og Spoiler/Vinge

WL1335R - Karosseri Rød/Sølv 1/14 for RSR Buggy 144001 (1) Lakkert,Hullet og Klippet karosseri og Spoiler/Vinge

WL1836 - Karosseri for Fierce 1/12 Buggy 124019  Komplett karosseri og Spoiler for Fierce 1/12

WL1843 - Karosseri for Habile 124018  Komplett karosseri med påmontert lys, reservehjul, spoiler mm.