Verktøy, Tilbehør

74023 - Tamiya Byggerns Verktøysett 8 deler Genialt verktøysett for skruing/bygging fra Tamiya i praktisk kasse. Dette er en Builders 8 skrutrekkersett fra Tamiya. Ett glimmerende skrutrekker sett for RC entusiasten. Dette er et sett med 8 skrutrekkere av forskjellige typer og størrelser.  3 stjernetrekker.  To flat skrutrekkere.  To pipe trekkere 5.5mm og 7mm.  En sekskantnøkkel 1.5mm Et avtakbar grep.  Tamiya Craft Tools Series no.23 "Builder's 8" Screwdriver Set Item No: 74023   ★This is a set of 8 screwdrivers of assorted types and sizes. The set consists of three sizes of (+) screwdrivers, two (-) screwdrivers, two box wrenches, a hex wrench, plus a detachable grip, packaged in a handy plastic carrying case. Specifications are subject to change without notice.

74104 - Basic Fil Sett (Smooth Doble Cut) ★Dette settet med 3 filer inkluderer 1 flat, 1 halvkuleformede og 1 rund fil for bruk i konstruksjon av plastmodeller, Mini 4WD-modeller og til og med for metallbearbeiding. Filene er dobbeltkuttet og deres glatte snitt gir en like jevn finish på materialet som bearbeides. ★Et spesielt belegg er påført grepet for å gjøre det ekstremt behagelig å holde. Spesifikasjoner : 1 stk dobbeltsidig flatfil 141mm med håndtak filblad 55x5.6x0.8mm 1 stk dobbeltsidig halvrund-flat 141mm med håndtak filblad med spiss 51x4.5x1.37mm 1 stk rundfil 141mm med håndtak filblad med spiss 52x2.4mm

Tamiya 67416 - Smådel-Skrueskål  (KTC-1750) Tamiya Maintenance Tray (KTC) Item No: 67416   ★This is a collaboration between Tamiya and Japanese tool manufacturer KTC. ★The lightweight aluminum tray will make the perfect receptacle for screws and the like as you assemble or work on your R/C or other models. ★Features the Tamiya and KTC logos laser-engraved on the face. ★Matte finish gives a classy appearance. ★Dimensions (approx.): 210mm x 150mm x 30mm.

Tamiya 69937 - Sideavbiter for Modellbyggeren (Gul) Praktisk sideavbiter for å klippe ut deler fra plastbrett ved bygging av modeller, tanken er rettkjeftet på den ene side og gir rene kutt, gult plasthåndtak for godt grep. Tangen er kun beregnet på plast. Special Edition Tamiya Craft Tools Product Modeler's Side Cutter α (Yellow) Item No: 69937 This versatile and long-lasting set of side cutters will be a great long-term addition to your tool kit, and is now available with handles in yellow. ★Carbon tool steel blades give a superlative cutting edge. Information is current as of September 2, 2020. Specifications are subject to change without notice.

Tamiya 74004 Pinsett Rett, Straight Tweezers   These quality straight tweezers come in handy when adding small parts to your models and for other jobs requiring precision work.      Made from stainless steel with black cationic finish for long life     This is the Tamiya (#74004) – Tamiya Straight Tweezers – MK804

Tamiya 74005 Curved Lexan Karosseri Saks - Long Edge  Saks for klipping av karosserier/Canopy o.l Tamiya Craft Tools Series no.5 Curved Scissors for Plastic Item No: 74005   ★The curved blades on these scissors give a smooth and well-formed curved cut, perfect for use on subjects such as polycarbonate R/C car bodies. Not only that, cutting using the deepest part of the jaw gives a straight cut. Specifications are subject to change without notice.

Tamiya 74007 - Stjernetrekker JIS NO:1 (1) Stjernetrekker med Japan Industri Standatd i størrelse 1, denne passer godt til Tamiya sine byggesett på de minste skruene. Vil også fungere på andre merker med JIS.   Craft Tool Series No.7 (+) Screwdriver No.1 M Item No: 74007 The alloy material of this screwdriver was selected for extended life. It has a slimline bit that ensures it can be employed to tighten screws even in tight spaces. Use with 2mm-2.6mm (+) screws commonly used on Tamiya R/C car models. Information is correct as of May 29, 2018. Specifications are subject to change without notice.

Tamiya 74008 - Flat-trekker NO:1 Medium (1) Flat skrutrekker med godt håndtak i størrelse 1 (Medium), denne passer bl.a godt til Tamiya sine byggesett. Vil også fungere på andre merker. Spesifikasjon: Klingebredde : 5.3mm Tykkelse : 1mm Klinge : 4mm   The alloy material of this screwdriver was selected for extended life. It has a slimline bit that ensures it can be employed to tighten screws even in tight spaces. Use with 1x5.3mm used on Tamiya R/C car models. Information is correct as of May 29, 2018. Specifications are subject to change without notice.

Tamiya 74016 - Basis Verktøysett for Modellbyggeren Dette RC-verktøysettet er ett sett som alle entusiaster burde ha! Når du bygger ett rc-produkt vil dette settet hjelpe deg med å få jobben gjort.  Settet består av rettkjeftet avbitertang, liten flat trekker, stjernetrekker, vinklet metall pinsett, fil og brytebladkniv i praktisk oppbevaringseske. Tamiya Craft Tools Series no.16 Basic Tool Set Basic Tool Set Item No: 74016 ★This set contains the basic, indispensable tools for model and craft work. A pair of side cutters for plastic, angled tweezers, small (+) and (-) screwdrivers, a craft knife and a file, all come neatly packed in a handy plastic case. Specifications are subject to change without notice.

Tamiya 74020 - Design Kniv med 30 ekstra Knivblad Dette er en kunstkniv/skalpell av høy kvalitet, ideell for detaljert håndverksarbeid. Det smale, vinklede bladet er ekstremt skarpt, noe som gjør det enkelt å trimme små dekaler, maskeringstape osv. ★Inkluderer 30 ekstra blader og en beskyttelseshette samt en beholder for brukte blad.   Løse blad : 74074 

Tamiya 74031 Decal Scissors (Spesialsaks for Dekaler) Spesialsaks designet for å klippe ut dekaler. The second application is for trimming R/C racing rubber tires. R/C racing rubber tires are generally soft and flash from the molding process needs to be trimmed away. Using Tamiya's carbon steel decal scissors makes this task easy and quick for both on-road and off-road rubber tires. These scissors may also be used for modifying rubber tires to suite the needs of the racer. Often times a racer may need to build a tire for a unique track condition. To do this the racer generally needs to precisely cut the tire that they are modifying and the Tamiya carbon steel decal scissors makes this task easy. These Tamiya Decal Scissors are made of high quality carbon steel and are perfect for two major applications. The first application is for cutting out your paper decals from a plastic model kit. The sharp carbon steel and fine point makes it easy for trimming the most intricate of decal designs. Note: The sharpness of the scissors will last long if used for paper decals only. Do not use for vinyl stickers like the ones found in an R/C car kit.

Tamiya 74044 Craft Tool Fine Drill Set (0.3, 0.4, 0.5, 0.6 & 0.8mm) 5 stk mikro bor for modeller. Item No: 74044   ★This handy set contains five different sizes of drill bit for use in a variety of modeling applications. ★They can be used on plastic and softer metals like aluminum. ★The set comes with a plastic storage case and sticker to separate the different diameters of bit. Specifications are subject to change without notice.

Tamiya 74049 Craft Tool Basic Bor Sett Borsettet inneholder Ø x L : 1stk 1.0 x 36mm 1stk 1.5 x 40mm 1stk 2.0 x 48mm 1stk 2.5 x 55mm 1stk 3.0 x 62mm Craft Tool Series No.49 Basic Drill Set Item No: 74049 Cater for all of your basic plastic model drilling needs with this set of 5 drill bits! Made from high grade material, they offer a long-lasting, superior bore.  

Tamiya 74050 Fine Pin Vise D 0.1-3.2mm Bitsholder for mikrobits fra 0.1 til 3.2mm diameter Model assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is compatible with 0.1mm-3.2mm diameter drill bits while the Rne Pin Vise S is designed for use with drill bits under 1 mm diameter.

Tamiya 74051 Fine Pin Vise S 0.1-1.0mm Bitsholder for mikrobits/bor fra 0.1 til 1.0 mm diameter Mange modelleringsoppgaver krever boring av hull i forskjellige størrelser. Fine Pin Vise D er et svært nyttig verktøy for denne typen boring. Den har en roterende ende, og er i stand til å holde bor fra 0,1 mm til 1,0 mm i diameter. Informasjonen er korrekt per 29. mai 2018. Spesifikasjoner kan endres uten varsel.

Tamiya 74085 - Verktøysett 8p Genialt verktøysett for bilskruing fra Tamiya i praktisk kasse. This new R/C Tool Set can is one that all R/C enthusiasts should have! You know that for building any R/C car, this set will help you get the job done. The 2mm Hex wrench comes in super handy for doing wheel changes with TamTech-Gear machines. Settet består av: No1. and No.2 phillip head screwdrivers are made from Nickel chrome molybdenum steel. 1.5, 2, 2.5 Hex wrenches are made from Nickel chrome molybdenum steel. Size 5 minus (-) screwdriver. Size 5.5 & 7 box driver. Comes with a convenient driver stand.

Tamiya 74112 Fine Pin Vise D-R 0.1-3.2mm Bitsholder for mikrobits og bor fra 0.1 til 3.2mm diameter, dette er ett presisjonsverktøy med gummi innlegg i håndtaket som gir nøyaktig og godt grep for brukeren.   The pin vise is an important tool in the armory of any modeler, allowing the making of precision holes for the purpose of modifying scale models. Compatible with drill bits of sizes from 0.1-3.2mm. Rotating grip end features built-in ball bearings for smooth movement. Made from nickel-plated brass, with elastomer grip. Features metallic sticker with the Tamiya twin star logo and wording “PIN VISE”. The rubber grip is engraved with the wording “TAMIYA”.

Tamiya 74120 - Stjernetrekker PRO JIS NO:2 (1) Stjernetrekker med Japan Industri Standatd i størrelse 2, denne passer godt til Tamiya sine byggesett på de største skruene. Vil også fungere på andre merker med JIS. Craft Tool Series No.120 (＋) Screwdriver PRO (L) Item No: 74120 ★This new plus (+) head screwdriver features a high-precision machined bit which helps prevent damage to screw heads. ★Ergonomically-designed grip. ★M size is for use with 2-2.6mm plus (+) head screws, while L size is for 3-5mm plus (+) head screws. ★The bit is magnetized. The information on this page is current as of September 5, 2014. Specifications are subject to change without notice.

Tamiya 74142 - Cutting Mat A5 Blue (1) ★This compact cutting board is made of semi-transparent blue resin with minimal odor. ★3-ply composition features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity. ★The 150mm x 220mm surface area has the front side printed with useful grid, increment angles, rulers, curved and circular markings, and the reverse is plain.

Tamiya 74151 Mini 4WD Curved Scissors (for Polycarbonate Bodies) Liten lexansaks for klipping av små detaljer i lexan og andre myke plasttyper. ★These scissors are for use cutting out curved sections on Mini 4WD car polycarbonate bodies, their short stainless steel blades providing long-lasting, quality curved cuts on lightly- and sharply-curved sections alike, as well as difficult-to-access spots. ★They are activated by pushing the grips together, for minimum interference from hands in the cutting process. ★Total length: 115mm, blade length: 12mm. ★Includes protective cap to cover the blades when not in use. Example of use