Verktøy, Tilbehør

M-Drive - Reservetupp - 2.5mm Unbrako Reservetupp for M-Drive og Bronto RC verktøysett. Byttes enkelt ut hvis den originale tuppen har blitt slitt eller skadet. Akslingdiameter 3mm med flatt festespor 5mm flatt festespor fra 6-11mm inn på akslingen.  Specs: Length: 100mm Tip/Bits Hex Size: 2.5mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: M3 hex screws with allen head (cylindrical) M4 hex screws with countersunk head M4 hex screws with button head

M-Drive Lexan Karosseri Saks Sett 1 Rett 1 Bøyd Saks for klipping av karosserier/Canopy o.l M-DRIVE - Body Scissor Set - Straight & Big Curve High quality set including two scissors suitable for cutting Lexan bodies and more. One scissor has a straight cutting shank and the other a curved shank (for cutting non straight lines). Specs: Handle: Black plastic Size: 10 x 65 x 140mm Laser Engraving: M-DRIVE logo on steel shank Cutting Shank Length: 24mm Suitable for: Cutting Lexan bodyshells, most non-reinforced plastics (up to 1.5mm thick), cardboard & paper

M-Drive Power Tool Bit Sett Mutter_Piper 4-5.5-7&8 1/4" M-DRIVE Power Tool Ti-Coated Bits Set - Nut Drivers - 4, 5.5, 7 & 8mm Suitable for: Nut Driver 4.0mm: For M2 screws Nut Driver 5.5mm: For M3 screws Nut Driver 7.0mm: For M4 screws Nut Driver 8.0mm: For M5 screws These Ti-coated power tool bits have a 6.35mm hex (1/4") that fits our P1 cordless hobby screwdriver. Specs: Material: HSS (Ti-Coated) Nutdrivers: 4, 5.5, 7 & 8mm Length: 100mm Hex Dimension: 6.35mm (1/4")

M-Drive Power Tool Bit Sett Rett Hex 1.5-2-2.5-3mm 1/4" M-DRIVE Power Tool Ti-Coated Bits Set - Straight Hex - 1.5, 2, 2.5 & 3mm These Ti-coated power tool bits have a 6.35mm hex (1/4") that fits our P1 cordless hobby screwdriver. Specs: Material: HSS (Ti-Coated) Straight Hex: 1.5, 2, 2.5 & 3mm Length: 100mm Hex Dimension: 6.35mm (1/4") Note that the smaller ones can be prone to brake if you dont use the tool at a straight angle Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm) Straight Hex 2.0mm: For M3 hex screws with countersunk head or button-head Straight Hex 2.5mm: For M3 hex screws with allen head (cylindrical) and M4 hex screws with countersunk head or button-head Straight Hex 3.0mm: For M4 hex screws with allen head or M5 with countersunk head & M5 with a button head  

M-Drive Verktøyveske - 260x240x35mm Praktisk verktøyveske for ditt verktøy, kan brukes til en rekke forskjellige typer! M-DRIVE Tool Pouch/Bag with Zipper This is a professional canvas tool pouch that is the perfect on-the-go storage for your M-Drive tools. Specs: Black canvas with yellow contrast Printed M-Drive logo Zipper Length: 260mm Width: 240mm Height: 35mm Avbildet verktøy er kun for illustrasjon og medfølger ikke!  

MD50207 - PRO Hjulmutter Verktøy - 7mm (M4) 7mm pipeverktøy som fungerer fint på hjulmutter og der dette kreves. M-DRIVE MD50207 - PRO Wheel Nut Wrench Tool - 7mm (M4 Nuts) High quality 7mm wheel nut wrench tool made of gold- & hard-anodized aluminium. The perfect PRO tool for removing and tightening your radio controlled truck that is equipped with M4/7mm hex wheel nuts such as all of Traxxas 1/10 scale cars such as 4-TEC 3.0, Bandit, Rustler, Stampede, Slash, Hoss & Maxx. Also fits many other 1/10 scale wheel nuts on brands such as Kyosho, Arrma & Corally etc. Specs: Handle: Gold anodized aluminium with chamfered edges Socket: Hard anodized aluminium Laser Engraving: M-DRIVE logo & size/type Height: 60mm Width: 90mm Nut Wrench Socket: 7mm hex (M4 Nuts) Suitable for: M4/7mm Hex Wheel Nuts

MD50208 - PRO Hjulmutter Verktøy - 8mm (M5) 8mm pipeverktøy som fungerer fint på hjulmutter/glødeplugger og der dette kreves. M-DRIVE MD50208 - PRO Wheel Nut Wrench Tool - 8mm (M5 Nuts & Glowplugs) High quality 8mm wheel nut wrench tool made of gold- & hard-anodized aluminium. The perfect PRO tool for removing and tightening your radio controlled truck that is equipped with M5/8mm hex wheel nuts such as Traxxas Unlimited Desert Racer. It also works excelent for tightening glowplugs on your nitro engine! Specs: Handle: Gold anodized aluminium with chamfered edges Socket: Hard anodized aluminium Laser Engraving: M-DRIVE logo & size/type Height: 60mm Width: 90mm Nut Wrench Socket: 8mm hex (M5 Nuts & Glowplugs) Suitable for: M5/8mm Hex Wheel Nuts Tightening Glowplugs

MD50217 - PRO Hjulmutter Verktøy - 17mm (M10) 17mm pipeverktøy som fungerer fint på hjulmutter og der dette kreves. M-DRIVE MD50217 - PRO Wheel Nut Wrench Tool - 17mm High quality 17mm wheel nut wrench tool made of gold- & hard-anodized aluminium. The perfect PRO tool for removing and tightening your 1/8 Buggy, 1/8 Truggy or 1/8 GT wheel nuts. It also fits Traxxas E-Revo, Summit, T-Maxx 3.3, Revo 3.3 & other brands of bigger monster trucks with 17mm wheel nuts. Specs: Handle: Gold anodized aluminium with chamfered edges Socket: Hard anodized aluminium Laser Engraving: M-DRIVE logo & size/type Height: 77mm Width: 110mm Nut Wrench Socket: 17mm hex Suitable for: 17mm Wheel Nuts

MD50224 - PRO Hjulmutter Verktøy - 24mm  24mm pipeverktøy som fungerer fint på hjulmutter og der dette kreves. M-DRIVE MD50224 - PRO Wheel Nut Wrench Tool - 24mm High quality 24mm wheel nut wrench tool made of gold- & hard-anodized aluminium. The perfect PRO tool for removing and tightening your large Scale Truck wheel nuts. Specs: Handle: Gold anodized aluminium with chamfered edges Socket: Hard anodized aluminium Laser Engraving: M-DRIVE logo & size/type Height: 77mm Width: 110mm Nut Wrench Socket: 24mm hex Suitable for: 24mm Wheel Nuts

MD61100 - M-Drive Hulltaker for Karosseri 0-14mm Praktisk verktøy for å lage hull i lexankarosserier e.l. Beregnet for hullstørrelse med diameter fra 0-14mm. Verktøyet har gradert på kniv hulltykkelse og er utstyrt med praktisk skrulokk slik at du er sikker på at den ikke åpner seg i baggen/verktøykassa og lager hull eller blir sløv. M-DRIVE - Body Reamer 0-14mm with Protective Cap High quality body reamer with black anodized aluminium handle and a super sharp conical HSS cutting blade that cuts perfect 0-14mm holes in Lexan bodies. An aluminium protective cap is also included. Specs:   Handle: Black anodized aluminium Handle Diameter: 18.7mm Handle Length: 76mm Laser Engraving: M-DRIVE logo + size Cutting Tool Size: 0-14x42mm Weight (including the protective cap): 47.5g Suitable for:     Making round holes up to 14mm in diameter in Lexan bodyshells  

MDrive - Multi-Mutterverktøy - 4, 5.5, 7 & 8mm (MD50000) Kryssnøkkel fra MDrive, M-DRIVE Multi Nut Wrench Tool - 4, 5.5, 7 & 8mm High quality multi Nut wrench tool cross with black anodized aluminium handle and tough HSS steel. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Size: 12x100x100mm Suitable for: Nut Driver 4.0mm: For M2 nuts Nut Driver 5.5mm: For M3 nuts Nut Driver 7.0mm: For M4 nuts Nut Driver 8.0mm: For M5 nuts & Glowplugs

MDrive - Pipe Nøkkelsett 4-5.5-7-8mm (MD30000) 4 stk Pipenøkler med utskiftbare klinger fra MDrive, solide håndtak og kvalitetsklinge. M-DRIVE Hex/Nut Driver Tool Set - 4, 5.5, 7 & 8mm High quality nutdriver wrench tool set with black anodized aluminium handles and tough drivers made of HSS steel. The wrenches are also available separately. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Material: High quality HSS Suitable for: Nut Driver 4.0mm: For M2 nuts Nut Driver 5.5mm: For M3 nuts Nut Driver 7.0mm: For M4 nuts Nut Driver 8.0mm: For M5 nuts (and std glow plugs)

MDrive - Pro Tin Unbrako Kulenøkkelsett 2-2.5-3mm (MD23000) 3 stk Pro Tin Kuleunbrakonøkler med utskiftbare klinger fra MDrive, solide håndtak og kvalitetsklinge.(umbraco) M-DRIVE PRO TiN Hex/Allen Wrench Tool Set - 2, 2.5 & 3mm - Ball Hex High quality PRO series ball tipped hex/allen wrench tool set with black & gold anodized aluminium handles and tough Tin coated hardened steel tips. The wrenches are also available separately plus also spare tips/bits.   Specs: Handle: Black and Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: TiN coated hardened steel

MDrive - Pro Tin Unbrako Nøkkelsett 1.5-2-2.5-3mm (MD21000) 4 stk Pro Tin Unbrakonøkler med utskiftbare klinger fra MDrive, solide håndtak og kvalitetsklinge.(umbraco) M-DRIVE PRO TiN Hex/Allen Wrench Tool Set - 1.5, 2, 2.5 & 3mm Straight Hex High quality PRO series hex/allen wrench tool set with black anodized aluminium handles and tough hardened steel tip with a TiN coating. The PRO wrenches are also available separately plus also spare tips/bits.   Specs: Handle: Black & Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: Hardened steel with TiN coating Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm) Straight Hex 2.0mm: For M3 hex screws with countersunk head or button-head Straight Hex 2.5mm: For M3 hex screws with allen head (cylindrical) and M4 hex screws with countersunk head or button-head Straight Hex 3.0mm: For M4 hex screws with allen head or M5 with countersunk head & M5 with a button head

MDrive - Reservetupp - 3.0mm Unbrako Reservetupp for MDrive og Bronto RC verktøysett. Byttes enkelt ut hvis den originale tuppen har blitt slitt eller skadet. Akslingdiameter 3mm med flatt festespor 5mm flatt festespor fra 6-11mm inn på akslingen.   

MDrive - Unbrako Nøkkelsett 1.5-2-2.5-3mm(MD20000) 4 stk Unbrakonøkler med utskiftbare klinger fra MDrive, solide håndtak og kvalitetsklinge.(umbraco) M-DRIVE Hex/Allen Wrench Tool Set - 1.5, 2, 2.5 & 3mm Straight Hex High quality hex/allen wrench tool set with black anodized aluminium handles and tough HSS steel in the tips. The wrenches are also available separately plus also spare tips/bits. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm) Straight Hex 2.0mm: For M3 hex screws with countersunk head or button-head Straight Hex 2.5mm: For M3 hex screws with allen head (cylindrical) and M4 hex screws with countersunk head or button-head Straight Hex 3.0mm: For M4 hex screws with allen head or M5 with countersunk head & M5 with a button head

Mini Digitalt Skyvelære 100mm Hobby Praktiskt skyvelære laget i karbon compositt for hobbybruk, leveres med utskiftbart drivbatteri LR44, nøyaktighet +/- 0.2mm, måleområde  0.1-100mm

Mini fjørklemmer - 60mm - 6stk Praktiske miniklemmer som er svært nyttig å ha tilgjengelig ved bygging av modeller. Enten det er balsafly, seilskuter eller plastbyggesett.

Mini fjørklemmer - 90mm - 4stk Praktiske miniklemmer som er svært nyttig å ha tilgjengelig ved bygging av modeller. Enten det er balsafly, seilskuter eller plastbyggesett.

Nålefil Sett Diamant 10 stk Dette settet med 10 hobby filer inkluderer 1 flat, 1 halvkuleformet, 1 trekant, 1 firkant, 1 rund, 2 Flat Spiss, 1 Oval Spiss, 1 Knivegg Spiss filer for bruk i konstruksjon av plastmodeller, Mini modeller og til og med for metallbearbeiding. Filene er dobbeltkuttet og deres glatte snitt gir en like jevn finish på materialet som bearbeides. Et spesielt belegg er påført grepet for å gjøre det behagelig å holde. Lengde 142mm

OMP - Ball Link Tang for 2mm Linker OMP Ball Link Plier M2, for små helikopter som OMP M1 og M2

P1 M-Drive Hobby Skrutrekker Li-ion 3.6V 1.3Ah 3.5Nm 180rpm 1/4" (6.35mm) Chuck, leveres med ladekabel for USB (Bits kommer i tillegg) M-DRIVE - P1 3.6V 1.3Ah Oppladbar Hobby Skrutrekker This electric powered cordless screwdriver tool is made for wrenching on your radio controlled vehicle or other hobby/model projects. The power tool is equipped with a 3.6V Li-ion battery with a capacity of 1.3Ah that will give you hours of wrenching time. There are four optional sets with Ti-coated bits that are sold separately. Egenskaper: Left/right rotation Twistable handle Built in LED light USB charging (max 5V): charger not included - use your own smartphone USB charger or a USB port on your PC. Magnetic 6.35mm (1/4") bits holder Made for RC hobby use CE tested and CE approved (including Declaration of Conformity) Printed manual: Swedish, English, German, French & Finnish Specs: Charge lead: USB (Type-A) to Micro-USB (Micro-B) Bits holder: Magnetic 6.35mm (1/4") hex (bits are sold separately) Battery: Li-ion (18650) 3.6V, 1.3Ah, 4.68Wh Motor: Geared RS-380S Torque: 3.5Nm RPM: 180 Weight: 300g

Pipesett med Håndtak 4 stk Solid pipenøkkelsett med stort bruksområde 4 av de mest vanlige små pipene for RC. 1 stk 4.0mm, 1 stk 5.0mm, 1 stk 7.0mm, 1 stk 8.0mm Utskiftbare klinger i 4mm herdet stål på aluminiumshåndtak

PLX1363UK -  Digitalt Strykejern 240V for betrekning Digitalt strykejern for betrekning, temperaturområde 100-220° +/-5%, leveres med tøybeskytter/sokk Følger med UK til EU adapter. Key Features Precise digital temperature control from 100 to 220degC. LCD offers unparalleled accuracy. Selective degC or degF temperature measurement. Teflon coated soleplate. Precision tip for accurate application of heat. 6 hour auto cut-off. Ergonomic handle design. Perfect for heat-shrink films. LED preheat indicator. What’s in the Box 1x Digital LCD sealing iron. 1x Metal safety stand. 1x Soleplate sock.

PLX1673 - 4.8-6.0V DC Auto Glow Ignitor with Indicator Automatgløding til Fly/Helikopter/Bil/Båt Gir en automatisk gløding på 20 sekunder Plug and play system Festes på glødepluggen med en fjærbelastet plugghette Passer for 4,8 – 6,0V batterier Plugges direkte inn i en ekstra mottakerkanal om nødvendig produktbeskrivelse For de som foretrekker å ikke bære for mye startutstyr til feltet, “ready box”, dammen eller racerbanen, er dette glødetennings systemet en virkelig ryddig og smart løsning. Hvis du bruker en 4,8 til 6 V NiMH-pakke, eller til og med en ekstra kanal på mottakeren, trenger du bare å trykke på knappen og når det røde lyset lyser, vil glødepluggen bli slått på i 20 sekunder. Hvis start ikke er øyeblikkelig, bare gjenta prosessen. Passer perfekt for fly, helikopter, båter og kan også brukes på biler.

PT-71 - Pacer Zap Permanent Lock Rød Z-71 gjengelim (PT71) Zap Lock Permanent gjengelim   Permanent rødt låselim for gjenger på bolt/mutter i metall og plast. Herder på 1-5 min. Hindrer at skruer vibrerer løs, 5,7 gram flaske.  

Rengjøringssett 9 deler i Futteral  Allsidig rengjøringssett med små spatel-pirkespisser og rengjøringbørster, 3 forskjellige dobbel børster 

RT80101 - HSP Gløder med lader 1800mah, for Glowmotorer. Gløder 1800mAh 124mm Lader: Input : 230V 50Hz 100mA Output : 3V 100mA 0.2 VA Batteri: 1.25V 1800mA

SkyRC GSM020 GPS-Måler Fart/Høyde med mer SkyRC leverer her en ytelsesanalyserer som benytter satelitter for å måle hastighet, høyde, lengde med med. Via App på din smarttelefon kan du få ut grafer og metadata du alltid har hatt lyst til å se! Går din rc-bil raskere enn naboens? Hvor høyt var det modellflyet fløy? osv osv! Saken veier 38gram og kan enkelt festes på din RC-modell. Last ned Appen GNSS PA for både Android og iOS telefoner. Performance Analyzeren har innebygget oppladbart batteri og dette lades via medfølgende USB-kabel. Spesifikasjoner: Størrelse 40x39x16mm Vekt 38gram GNSS Både GPS og GLONASS Innebygget minne Ja - 1mb Brukstid opptil 5 timer Product details in english Think youre FAST? Prove it! How many times have you buddy mocked you were bragging your RC machine goes over 100-blah-blah mph? Were betting too many times. So there are few ways to prove your RC car on plane is the fastest on earth. Now SkyRC delivers an app-enabled GNSS Performance Analyzer in an affordable and compact design. RC gurus now have a cutting edge gauge to measure the overall performance of their RC gadgets accurately. Just use an app on your smartphone, strap it to your car, and track the speed. You can mount to almost any RC vehicle, and it does a lot more than just display speed. To tell the truth before and after modifications. Knowledge is power! By knowing the facts before and after modifications, your efforts will not be in vain. GNSS Performance Meter will help you make sense of the improvements and help you make educated decisions to make sure youre not spinning your wheels. For everyone trying to gauge their performance, heres an affordable way to do just that. Just got some new mods installed? Get some real feedback, really quickly. This is a professional-grade instrument accessible to enthusiasts. Its every modelers dream. Enjoy! Improved accuracy by tracking two satellite constellations The GNSS Performance Analyzer supports GNSS(Global Navigation Satellite System) with GPS and GLONASS System that means more satellites are orbiting the earth. The advantage of this many satellites will definitely improve positional accuracy by tracking two satellite constellations instead of just GPS. Small but Versatile GNSS Performance Analyzer (GSM020) allows you to measure and analyze many aspects of your RC car & airplanes performance using the latest GNSS engine (GPS. GLONASS) which gives you Accélération, G-force, Speed. Time, Distance. High and Vertical Velocity. With its compact dimension of 40mm x 40mm x 17mm and internal antenna, it is an ideal choice for mounting on RC vehicles & airplanes. Case Size: 40 x 39 x 16mm Weight: 38g Peace of mind with built-in liPo battery The 5 hours up-time on the built-in rechargeable LiPo battery can give enough racing time to RC drivers or pilots in the field! With the micro USB charging port, it is very convenient to connect it to a USB port or another compatible USB power source for charging. Go mobile with the app With the free GNSS PA App. drivers can track and monitor driving racing speed and remotely from the Android or iOS device. 3 modes : Drag Race Track Race Flying Mode Visual LED indicator The GNSS Analyzer is equipped with 3 LED indicators, signaling different operating modes. Open GNSS PA on the smartphone, the analyzers Bluetooth Icon will stay steady blue, reflecting the device is connected. the satellite icon will stay steady green after a while of successful GNSS signal acquisition. Built-in 1M Memory The built-in 1M memory can record up to 50 records. And all the data can be transferred to the smartphone for analyzing! When the Flash is full, the previous record will be replaced automatically. Now you dont have to think about clearing data all the time or worry about missing the critical tracking data when the memory is full. Support both Metric and Imperial system of Measurement The Metric and Imperial systems can be switched easily by the App! Specifications Case Size: 40 x 39 x 16mm Weight: 38g  

SkyRC LiPoPal Balanserer og Spenningsmåler Genial liten sak man kan bruke til å kontrollere cellespenning på lipobatterier. Den kan også balansere lipo, samt vise total spenning og antatt restverdi på batteriet. SKYRC LiPoPal is a simply used battery checker and self voltage balancer. When we are flying or running outside, it is difficult to know the remaining capacity of the battery. With this tiny LiPoPal we could check the voltage of each cell and the remaining capacity in percentage at anytime and anywhere. As we know, if each cell of the battery pack is balanced, the battery performance will be much better and the cycle life will be longer. But sometimes, we may don? to have time or tool to balance the battery cell. With this small kit, when it detects the pack is not balanced, it will start work to balance the pack cell at once. Functions: There are two functions of this compact device: 1.Battery CheckerThe LiPoPal can check the voltage of each cell of a lithium battery pack and remaining capacity in percentage. 2.Self Voltage BalancerThis program can equalize the individual voltages to their lowest one. Balance operation automatically starts about 5 seconds after the battery pack is connected. When the voltage difference between cells over 0.02V, the balancer will start to work. The corresponding voltage will be blinking when it is balancing. When the voltage difference between cells reaches 0.01V or less, balance operation ends and the device enters the sleep mode and SLP will be displayed on the LCD. How to use? Simply connect the battery pack to 7 pins connector (XH type). Please note the negative lead or pin of the LiPo connector should match the Negative marked on the shell of LiPoPal. After the LiPo is connected, the LCD display the voltage of each cell and the built in balance will check the voltage. If the pack is not balanced, the balancer will start working. Applicable Battery Pack: 2-6S LiPo Voltage Display Tolerance: +/-1.5pst Voltage Display Resolution: 0.01v Voltage Display Range: 0-5v Balancing Current: 50mA Operating Temperature: 10+45deg Storage Temperature: -20+60deg Case Size: 70x38x11mm Weight: 23g

SkyRC Progbox Six-in-One Programmeringsboks for SkyRC-fartsregulatorer som støtter programmering via denne boksen.Den kan også brukes som PC interface, monitor, servotester, kv-tester og batterimonitor.  

Spektrum Vindpølse 25x90cm (SPMPWS100) The Spektrum Airfield Windsock is the perfect complement to your local flying club or anywhere you fly RC aircraft. Easily gauge the relative windspeeds and direction when placed next the runway or landing area. Made of durable tear resistant nylon that is resilient to fading from long exposure to the sun. Easy to mount to your pole of choice with the included metal rod (mounting hardware not included).

Tamiya 67416 - Smådel-Skrueskål  (KTC-1750) Tamiya Maintenance Tray (KTC) Item No: 67416   ★This is a collaboration between Tamiya and Japanese tool manufacturer KTC. ★The lightweight aluminum tray will make the perfect receptacle for screws and the like as you assemble or work on your R/C or other models. ★Features the Tamiya and KTC logos laser-engraved on the face. ★Matte finish gives a classy appearance. ★Dimensions (approx.): 210mm x 150mm x 30mm.

Tamiya 69937 - Sideavbiter for Modellbyggeren (Gul) Praktisk sideavbiter for å klippe ut deler fra plastbrett ved bygging av modeller, tanken er rettkjeftet på den ene side og gir rene kutt, gult plasthåndtak for godt grep. Tangen er kun beregnet på plast. Special Edition Tamiya Craft Tools Product Modeler's Side Cutter α (Yellow) Item No: 69937 This versatile and long-lasting set of side cutters will be a great long-term addition to your tool kit, and is now available with handles in yellow. ★Carbon tool steel blades give a superlative cutting edge. Information is current as of September 2, 2020. Specifications are subject to change without notice.

Tamiya 74004 Pinsett Rett, Straight Tweezers   These quality straight tweezers come in handy when adding small parts to your models and for other jobs requiring precision work.      Made from stainless steel with black cationic finish for long life     This is the Tamiya (#74004) – Tamiya Straight Tweezers – MK804

Tamiya 74005 Curved Lexan Karosseri Saks - Long Edge  Saks for klipping av karosserier/Canopy o.l Tamiya Craft Tools Series no.5 Curved Scissors for Plastic Item No: 74005   ★The curved blades on these scissors give a smooth and well-formed curved cut, perfect for use on subjects such as polycarbonate R/C car bodies. Not only that, cutting using the deepest part of the jaw gives a straight cut. Specifications are subject to change without notice.

Tamiya 74007 - Stjernetrekker JIS NO:1 (1) Stjernetrekker med Japan Industri Standatd i størrelse 1, denne passer godt til Tamiya sine byggesett på de minste skruene. Vil også fungere på andre merker med JIS.   Craft Tool Series No.7 (+) Screwdriver No.1 M Item No: 74007 The alloy material of this screwdriver was selected for extended life. It has a slimline bit that ensures it can be employed to tighten screws even in tight spaces. Use with 2mm-2.6mm (+) screws commonly used on Tamiya R/C car models. Information is correct as of May 29, 2018. Specifications are subject to change without notice.

Tamiya 74008 - Flat-trekker NO:1 Medium (1) Flat skrutrekker med godt håndtak i størrelse 1 (Medium), denne passer bl.a godt til Tamiya sine byggesett. Vil også fungere på andre merker. Spesifikasjon: Klingebredde : 5.3mm Tykkelse : 1mm Klinge : 4mm   The alloy material of this screwdriver was selected for extended life. It has a slimline bit that ensures it can be employed to tighten screws even in tight spaces. Use with 1x5.3mm used on Tamiya R/C car models. Information is correct as of May 29, 2018. Specifications are subject to change without notice.

Tamiya 74016 - Basis Verktøysett for Modellbyggeren Dette RC-verktøysettet er ett sett som alle entusiaster burde ha! Når du bygger ett rc-produkt vil dette settet hjelpe deg med å få jobben gjort.  Settet består av rettkjeftet avbitertang, liten flat trekker, stjernetrekker, vinklet metall pinsett, fil og brytebladkniv i praktisk oppbevaringseske. Tamiya Craft Tools Series no.16 Basic Tool Set Basic Tool Set Item No: 74016 ★This set contains the basic, indispensable tools for model and craft work. A pair of side cutters for plastic, angled tweezers, small (+) and (-) screwdrivers, a craft knife and a file, all come neatly packed in a handy plastic case. Specifications are subject to change without notice.

Tamiya 74020 - Design Kniv med 30 ekstra Knivblad Dette er en kunstkniv/skalpell av høy kvalitet, ideell for detaljert håndverksarbeid. Det smale, vinklede bladet er ekstremt skarpt, noe som gjør det enkelt å trimme små dekaler, maskeringstape osv. ★Inkluderer 30 ekstra blader og en beskyttelseshette samt en beholder for brukte blad.   Løse blad : 74074 

Tamiya 74031 Decal Scissors (Spesialsaks for Dekaler) Spesialsaks designet for å klippe ut dekaler. The second application is for trimming R/C racing rubber tires. R/C racing rubber tires are generally soft and flash from the molding process needs to be trimmed away. Using Tamiya's carbon steel decal scissors makes this task easy and quick for both on-road and off-road rubber tires. These scissors may also be used for modifying rubber tires to suite the needs of the racer. Often times a racer may need to build a tire for a unique track condition. To do this the racer generally needs to precisely cut the tire that they are modifying and the Tamiya carbon steel decal scissors makes this task easy. These Tamiya Decal Scissors are made of high quality carbon steel and are perfect for two major applications. The first application is for cutting out your paper decals from a plastic model kit. The sharp carbon steel and fine point makes it easy for trimming the most intricate of decal designs. Note: The sharpness of the scissors will last long if used for paper decals only. Do not use for vinyl stickers like the ones found in an R/C car kit.

Tamiya 74044 Craft Tool Fine Drill Set (0.3, 0.4, 0.5, 0.6 & 0.8mm) 5 stk mikro bor for modeller. Item No: 74044   ★This handy set contains five different sizes of drill bit for use in a variety of modeling applications. ★They can be used on plastic and softer metals like aluminum. ★The set comes with a plastic storage case and sticker to separate the different diameters of bit. Specifications are subject to change without notice.

Tamiya 74049 Craft Tool Basic Bor Sett Borsettet inneholder Ø x L : 1stk 1.0 x 36mm 1stk 1.5 x 40mm 1stk 2.0 x 48mm 1stk 2.5 x 55mm 1stk 3.0 x 62mm Craft Tool Series No.49 Basic Drill Set Item No: 74049 Cater for all of your basic plastic model drilling needs with this set of 5 drill bits! Made from high grade material, they offer a long-lasting, superior bore.  

Tamiya 74050 Fine Pin Vise D 0.1-3.2mm Bitsholder for mikrobits fra 0.1 til 3.2mm diameter Model assembly often calls for the drilling of holes of various sizes and these Fine Pin Vises are the ideal tools for the job. The Fine Pin Vise D is compatible with 0.1mm-3.2mm diameter drill bits while the Rne Pin Vise S is designed for use with drill bits under 1 mm diameter.

Tamiya 74051 Fine Pin Vise S 0.1-1.0mm Bitsholder for mikrobits/bor fra 0.1 til 1.0 mm diameter Mange modelleringsoppgaver krever boring av hull i forskjellige størrelser. Fine Pin Vise D er et svært nyttig verktøy for denne typen boring. Den har en roterende ende, og er i stand til å holde bor fra 0,1 mm til 1,0 mm i diameter. Informasjonen er korrekt per 29. mai 2018. Spesifikasjoner kan endres uten varsel.

Tamiya 74085 - Verktøysett 8p Genialt verktøysett for bilskruing fra Tamiya i praktisk kasse. This new R/C Tool Set can is one that all R/C enthusiasts should have! You know that for building any R/C car, this set will help you get the job done. The 2mm Hex wrench comes in super handy for doing wheel changes with TamTech-Gear machines. Settet består av: No1. and No.2 phillip head screwdrivers are made from Nickel chrome molybdenum steel. 1.5, 2, 2.5 Hex wrenches are made from Nickel chrome molybdenum steel. Size 5 minus (-) screwdriver. Size 5.5 & 7 box driver. Comes with a convenient driver stand.

Tamiya 74112 Fine Pin Vise D-R 0.1-3.2mm Bitsholder for mikrobits og bor fra 0.1 til 3.2mm diameter, dette er ett presisjonsverktøy med gummi innlegg i håndtaket som gir nøyaktig og godt grep for brukeren.   The pin vise is an important tool in the armory of any modeler, allowing the making of precision holes for the purpose of modifying scale models. Compatible with drill bits of sizes from 0.1-3.2mm. Rotating grip end features built-in ball bearings for smooth movement. Made from nickel-plated brass, with elastomer grip. Features metallic sticker with the Tamiya twin star logo and wording “PIN VISE”. The rubber grip is engraved with the wording “TAMIYA”.

Tamiya 74120 - Stjernetrekker PRO JIS NO:2 (1) Stjernetrekker med Japan Industri Standatd i størrelse 2, denne passer godt til Tamiya sine byggesett på de største skruene. Vil også fungere på andre merker med JIS. Craft Tool Series No.120 (＋) Screwdriver PRO (L) Item No: 74120 ★This new plus (+) head screwdriver features a high-precision machined bit which helps prevent damage to screw heads. ★Ergonomically-designed grip. ★M size is for use with 2-2.6mm plus (+) head screws, while L size is for 3-5mm plus (+) head screws. ★The bit is magnetized. The information on this page is current as of September 5, 2014. Specifications are subject to change without notice.

Tamiya 74142 - Cutting Mat A5 Blue (1) ★This compact cutting board is made of semi-transparent blue resin with minimal odor. ★3-ply composition features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity. ★The 150mm x 220mm surface area has the front side printed with useful grid, increment angles, rulers, curved and circular markings, and the reverse is plain.

Tamiya 74151 Mini 4WD Curved Scissors (for Polycarbonate Bodies) Liten lexansaks for klipping av små detaljer i lexan og andre myke plasttyper. ★These scissors are for use cutting out curved sections on Mini 4WD car polycarbonate bodies, their short stainless steel blades providing long-lasting, quality curved cuts on lightly- and sharply-curved sections alike, as well as difficult-to-access spots. ★They are activated by pushing the grips together, for minimum interference from hands in the cutting process. ★Total length: 115mm, blade length: 12mm. ★Includes protective cap to cover the blades when not in use. Example of use

Ultimate Bearing Cleaning Unit-Renseglass for kulelager Verktøy for å rense kulelager. Åpne beholderen, legg i lagerene du ønsker å rense, fyll opp 1/3 med rensemiddel og sett på lokket. Rist i ca 30 sekunder eller til lagerene er renset skikkelig. Skal du rense kulelager med gummitetning, så bør tettningen fjernes først, ellers kan gummien bli ødelagt. Gummien kan du tørke av med en ren klut, eller bruke såpevann. Bruker du såpevann, sørg for å tørke gummien helt før setter den tilbake på lageret. Etter rens av lageret er det viktig å olje det. Legg i 2 dråper med olje, og spinn lageret mellom fingrene for å spre oljen rundt. Har du keramiske lager, så trenger du kun 1 dråpe med olje.  

Ultimate Fylleflaske Nitro/Metanol Drivstoff 500CC med Alu påfyllingsrør (1) Dette er en 500cc fylleflaske for nitrofuel. Flasken er laget i myk plast og har aluminiumsrør med støvhette. Videre er den gjennomsiktig slik at du lett ser hvor mye som er igjen. Laget for rask påfylling av fuel.

Universalsokk for Strykejern Universal sokk for strykejern som passer de aller fleste betrekningsjern. En beskyttelses sokk som benyttes på strykejern som er dedikert til betrektning. Denne sokken, brukes for å unngå striper i filmen og lage en penere finish. Max bredde : 55mm Max lengde : 115mm There’s nothing quite like having the right tool for the job and whilst we can all make do with a household iron and a cloth, using a purpose-made covering iron with a fitted sock can turn a good job into a beautiful one. Fit a sock and kiss goodbye to the dents and scuffs caused by the hard edge of your iron. Worth every penny.   ill foto: litt brunere i farge.

MD95001 - Bag 1 Sender og Laderveske 24x23x14cm Fin allsidig veske for sender, lader, batterier m.m. Passer ypperlig for Axial SCX24 bilene, her er det plass til bilen, radio, lader ++ M-Drive RC Bag 1 - Transmitter or Charger Bag This 24 x 23 x 14cm black RC accessory bag from M-Drive is a lightweight case designed to safely store, transport & protect your RC transmitter, charger and or batteries for your RC vehicle. Material Weather resistant, heavy-duty 600-denier nylon shell that can be cleaned with mild soap and a moist cleaning cloth. Transmitters It fits most transmitters used with todays RC cars. All Futaba (surface) and all Traxxas transmitters fit perfectly. You will also have some space to store some extra batteries. Chargers All Traxxas chargers and most SkyRC chargers fit nicely in this bag. You will also have room for a few extra batteries etc. RC Equipment Storage The RC accessory bag is a practical storage place when you’re not in using them at home. Weather Resistant A heavy-duty 600D nylon shell shields your lighting equipment from moisture and dust. Removeable Divider The internal divider can be used if you need an additional area for some accessories or some extra batteries etc. Inside Size: Length: 24cm Width: 23cm Height: 14cm Inside Size With Divider: Main area: 17 x 23 x 14cm Secondary area: 7 x 23 x 14cm

MD95003 - Transport-Oppbevarings Bag for Bil STOR 67x37x36cm Stor bag for transport og eller oppbevaring med mange bruksområder. M-Drive RC Bag 3 - Crawler This 67 x 36.5 x 36cm black RC Vehicle bag from M-Drive is a lightweight case designed to safely store, transport & protect your 1/10 scale TRX-4 or TRX-6 crawler and it's transmitter/charger. Also fits most other 1/10 scale crawlers. Material Weather resistant, heavy-duty 600-denier nylon shell that can be cleaned with mild soap and a moist cleaning cloth. Crawlers The RC Bag 3 is a practical soft and lightweight bag that can store most 1/10 scale radio controlled crawlers such as Traxxas TRX-4 & TRX-6. It may also fit other simmilar sized crawlers/trucks. RC Garage Storage This RC Car Bag is a practical storage place in your home when you’re not in using it. The perfect RC Garage Storage solution! Weather Resistant A heavy-duty 600D nylon shell shields your RC equipment from moisture and dust. Shoulder Strap The removable, easily adjustable shoulder strap includes a cushioned shoulder pad for comfort. Side Handles Heavy-duty rubber grip side handles add lifting and carrying options. Removeable Divider The internal dividers are removeable and lets you store your vehicle transmitter, a charger and a few extra batteries etc. Inside Size: Length: 67cm Width: 36.5cm Height: 36cm Inside Size With Dividers: Main area: 67 x 27 x 36cm Secondary area(s): 67 x 8.5 x 36cm

PRO605802 - Bane-Oppbevarings-Verktøy Bag 58x28x20cm (1) Transport-Trackbag-Verktøyholder med mange bruksområder. Dette er en Pro-Line Track Bag. Møt opp til løpene i stil med Pro-Lines nye baneveske! Den nye bagen har glidelåser i bagasjekvalitet og materiale som viser din støtte med en enorm PL-logo.Bagen støttes av en indre bølgepappstøtte som beskytter tingene dine og holder bagens form. Denne flerbruksbagen kan romme en haug med dekk, verktøy, ladere, batterier eller i utgangspunktet alt du trenger for å ta deg til banen, samtidig som den er liten nok til å enkelt passe i bagasjerommet på bilen din. Track Bag har en verktøyholder med 13 spor og 3 gjennomsiktige nettingposer for ekstra verktøy, lim eller maskinvare du trenger mens du er på banen. Pro-Lines Track Bag har en justerbar skulderstropp for enkel transport og en helt åpen topp for enkel tilgang til tingene dine. Banevesken er større enn Pro-Lines dekkveske og måler 23"(580mm) x 11"(280mm) x 8"(200mm).