Løten RC Shop AS
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

Stort utvalg og god Service

Vår kunnskap, din trygghet

Gi en rating på Google

369911 - 4WD Rear Wheel Aerodisk with 14mm Hex - White (2)

Art.nr: 369911
59,- 75,- -21%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

3 På lager

369911 - 4WD Rear Wheel Aerodisk with 14mm Hex - White (2)

2 stk bakfelg for 4wd 1/10 buggy med 14mm hex

Specially designed XB4 rear wheels. They do not only perfectly fit but they are also perfect for high competition racing. The wheels are made from very flexible material but are still durable against impacts.

The side of the wheel is aerodynamic for maximum performance.

The special features of the wheel are visible from the inside – the reinforcement ribs are designed to make the wheels as stable as possible and to eliminate deformation.

The wheel design features a 14mm internal hex.


http://www.teamxray.com/teamxray/products/proddesc.php?prod_id=4418&kategoria=0&catName=4WD Rear Wheel Aerodisk with 14mm Hex - White (2)

Kommentarer

Share |
XRay

XRay


xray

      XRAY TIME LINE (or Who is XRAY?)


Who is XRAY?
      XRAY MODEL RACING CARS
was established in the year 2000 by Dipl.       Eng. Hudy Juraj .

      Even though the company is brand new, the founder has had long and successful       experiences in designing RC model racing cars.

A brief history of Dipl. Eng. Hudy Juraj and his contribution to the       RC world:
1972/74
      1972/74 - first self-designed and manufactured slotcars. Juraj became Multi-Champion       of Middle and Eastern Europe in slotcar racing. These slotcars were No.       1 at that time and were winning all the races.
xray_timeline
1975
      1975 - the first RC cars were designed and produced; the focus was on nitro       and electric cars. All of the cars were handmade in small series in a workshop       9m2. At the same time, the first handmade bodies were produced from laminate       and epoxy material.
xray_timeline
1977
      1977 - Juraj produces hand-made chassis plates from 4mm thick duraluminum.       The car in the picture, called SHADOW, uses this kind of chassis.
xray_timeline
1978
      1978 - a new RC car was designed with the motor in a vertical position.       The car featured solid suspension and a flexible chassis.
xray_timeline
1979
      1979 - Juraj designed a new nitro car with the motor in a horizontal position.       The car featured solid rear suspension and a front suspension using simple       dampening.
xray_timeline
1980
      1980 - a newly-designed nitro car featured a differential in the wheel.       The front of the chassis was made from fibreglass, and the rear from duraluminum.     
xray_timeline
1981
      1981 - a new nitro car featured solid suspension, a central differential,       adjustable width and caster, and simple dampening. The first bodies were       produced using a vacuum machine and special ABS material. From this year       onwards, 10-15 cars were hand-made each year.
xray_timeline
1982
      1982 - a new nitro car featured independent suspension, rear differential,       and direct drive through gears between motor and rear transmission. A front       central shock is used, and a wing is attached directly to the rear suspension.     
xray_timeline
1983
      1983 - a new nitro car was produced, based on the successful 1982 design.       New centrally-mounted front shocks and an anti-roll bar were introduced,       and a Serpent fueltank was used. This ultra-stiff chassis design was the       most professional, and achieved the greatest racing performance at the time.     
xray_timeline
1984-85
      1984/85 - one of the world's first 4WD nitro cars was introduced, using       driveshafts and a front one-way differential.
xray_timeline
1986-87
       1986/87 - a new nitro car featured an automatic 2-speed transmission, and       fully-enclosed front and rear transmissions to provide dust protection.       This car was great for dusty racing conditions.
xray_timeline
1988-89
      1988/89 - the first off-road car is designed and manufactured. An improved       nitro car also appeared, based on the successful 1987 design, and also featured       ultra lightweight materials. These cars featured a purely technical design       that distinguished them from "toy" cars. There were no unnecessary parts,       and everything was strategically placed for best weight distribution and       performance.
xray_timeline
1989
      1989 - After the fall of communism in Eastern Europe, Juraj establishes       his first company, named SPECIAL, which was later renamed to HUDY. Juraj       moves manufacturing from his own flat/workshop to a garage 60m2. The first       machines are bought and real production begins. The company focuses on designing       accessories and tools for slotcars. The first comm lathes and slotcar tire       truers are designed. The HUDY company has 60 employees at this time, over       2000m2 production factory, and manufactures the highest quality RC products       that are sent to over 30 distributors around the world.
1990
      1990 - Juraj introduces his products at SERPENT headquarters in Holland,       and HUDY company becomes the manufacturer of special transmission parts       using special spring steel. To this day, HUDY uses their top secret, self-developed       formula to produce the highest quality parts from special spring steel.       The co-operation with SERPENT continues, with HUDY producing spring steel       parts as well as parts from duraluminum (chassis), and graphite composite       materials. HUDY continues to use their extensive experience and self-developed       technologies to design and manufacture the highest-quality parts.
xray_timeline    
2000
      2000 - Juraj establishes the XRAY MODEL RACING CARS company, which focuses       its many years of design and manufacturing experience to produce high-tech,       high-quality RC model racing cars. The first project, named "T1", is designed       and introduced.
2001
      2001 - XRAY products are represented and distributed in over 30 countries       around the world, supported by professional services and a factory team.       TEAM XRAY is established, made up of dozens of top professional RC drivers       around the world who look forward to get maximum results during their race       seasons.
xray_timeline
   
 

Trykk ENTER for å søke