Handlekurv


Handlekurven er tom

0,-

Tamiya 56361 Mercedes-Benz Arocs 3348 6x4 Tipper Truck Red Cab &

Art.nr: 56361
På lager: 1

6.949,- 8.049,-

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager kan du legge igjen epostadressen din i skjemaet under.

Tamiya 56361 Mercedes-Benz Arocs 3348 6x4 Tipper Truck Red Cab & Silver Bed Edition Kit

Byggesett fra Tamiya som tippbil, med tippkasse i lakkert i sølv og Hytte i støpt rød plast

Nødvendig tilbehør:

  • Tippsystem (anbefaler 56545)
  • Byggesett fra Tamiya, nødvendig tilbehør:

  • 2 x servo (Gir & Styring)
  • Radio/Motaker min 4CH (anbefalt 6CH)
  • Batteri/Lader
  • Lakk (TS) Evnt klarlakk
  • ESC eventuellt lyd/lysmodul som har allt man trenger av lys/lyd og innebygd ESC
  • Vi anbefaler Beier Lydmodul og Servonaut Motor 7.2V eller 12V du kan da fjerne girservo da servonaut eliminerer behov for girveksler.

    Radio og Motaker her er det noen å velge i, men du bør ha min 6CH

    Carson 14 kanals radio er en god startradio, denne er enkel og inkluderer 14 ch motaker og er klargjort for Tamiya sine MFC og kan også fåes som Digital 14 kanals radio, begge Carsonradioene er rimelige og gode radioer for Tamiya lastebilene.

    Lader er ett utall å velge mellom, velg en Computerlader som tar det meste, en E680 er ett veldig fornuftig valg

    Benytt TS lakk fra Tamiya så får du best resultat.

Ved bruk av servonautmotor og motorfeste må UAT1 benyttes.
 
Mercedes-Benz Arocs 3348 6x4 Tipper Truck
Red Cab & Silver Bed Edition

Item No: 56361


Length: 576mm. Image shows painted and assembled kit.
 
Tip-Top!
The Arocs series is a line of heavy-duty models introduced in 2013 by the world's leading truck manufacturer, Daimler AG (Germany). This R/C model assembly kit recreates the dual rear axle-driven Arocs 3348 6x4 tipper truck, which runs on a 12.8-liter turbocharged inline-6 engine capable of 480hp. The highly detailed body comes with a pre-painted red cab and silver bed, each having also been given a urethane topcoat. It breathtakingly captures the slimline form of the truck cab, including the distinctive bucket tooth design grille. Depictions of headlight guards, front bumper and skid plate underneath are parts of a truly realistic finish. The assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter. The ladder frame chassis features aluminum side channels with resin cross members. A realistic 1-piece resin bed is reinforced with a metal frame. Power from the front-mounted motor is delivered to rear axles via propeller shaft; a built-in differential gear on each axle enables smooth cornering. Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.
 
Specifications
★Length: 576mm, Width: 190mm, Height: 267mm, Weight: Approx. 4.3kg (*with R/C equipment and battery pack attached) ★Wheelbase: 257mm+103mm ★Tread: 156mm (Front), 138mm (Rear, Double Tire) ★Chassis: Aluminum & Polycarbonate Resin Ladder Frame ★Suspension: Front/Rear Leaf Springs ★Caster Angle: 0° (Front & Rear) ★Camber Angle: 0° (Front & Rear) ★Toe Angle: 0° (Front & Rear) ★Dampers: Front/Rear Aluminum Dummy Dampers ★Drivetrain: Rear 2-Axle Drive ★Transmission: 3-Gear Transmission (gear shifting operated from transmitter) ★Gear Ratio: (1st Gear) 32.49:1, (2nd Gear) 17.76:1, (3rd Gear) 10.66:1 ★Diff Gears: 3-Bevel Diff. ★Motor: TR Mighty-Tuned (35T) ★Tire Width/Diameter: 22/83mm (Front), 22/84mm(Rear)
 
Separately Required Items
★4-channel, 2-servo R/C unit with self-neutral stick type transmitter ★ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger
 
Get Tipping!
This set features parts to enable control of Tamiya 1/14 R/C tipper truck beds via separately sold transmitter. It includes geared motor, spindle shaft, link pieces and ACU-01 unit, and can raise beds carrying loads of up to 10kg. A clutch is installed to help prevent damage due to over-loading.
Click here to see the item page: Item 56545 Electric Actuator Set for 1/14 Scale Tipper Truck
 
Realistic Lights, Sounds, and Vibration
Tamiya Multi-Function Control Units (sold separately) offer light, sound, and vibration operation to accompany your R/C truck experience. Engine sounds have been digitally recorded from an actual truck, and together with air horn, gear shifting, and many other realistic sounds, give you the feeling that you are driving the real thing! Headlights, brake lights, fog lamp, hazard lights and turn signal operations are also at your fingertips.

Information is current as of January 15, 2020. Specifications are subject to change without notice.
 
 
 

https://www.tamiya.com/english/products/56361/index.htm

Kommentarer

Share |
TAMIYA

TAMIYA


Produsent av rc-lakk, lastebiler, biler, tanks og rc-tilbehør 

Relaterte produkter

  • Bilde av Carson Reflex Stick II
    1.590,-
  • Bilde av Carson REFLEX Stick
    1.990,-
  • Bilde av Tamiya 56523 Multi
    3.699,-
  • Bilde av Tamiya 56526 RC Motor
    399,-
  • Bilde av HD-1501MG - Analog 17kg
    269,-
  • Bilde av HD-6001MG - Power HD
    189,-
  • Bilde av HD-9001MG - Analog 9.8kg
    225,-
  • Bilde av Tamiya 19115372 S Parts
    159,-
  • Bilde av Tamiya 19115368 K Parts
    149,-
  •   -16%
    Bilde av Tamiya 56545 - Elektrisk
    4.390,-3.699,-
  • Bilde av 2310079 Thrust B-Spec
    265,-
  • Bilde av Hackmoto V2 80T 540
    199,-
  •   -5%
    Bilde av Hobbywing Quicrun WP
    629,-599,-
  •   -14%
    Bilde av Hobbywing Quicrun
    349,-299,-
  • Bilde av 904028 Carson 3 Axle
    420,-
  • Bilde av LESU 1:14 Universal 0.5
    399,-
  • Bilde av Tamiya 19115457-
    275,-
  • Bilde av 904053 Carson Ball
    349,-

Kunder kjøpte også

  •   -16%
    Bilde av Tamiya 56545 - Elektrisk
    4.390,-3.699,-