Deler Traxxas

5827 - Batteri holder standard Replacement part for these models: Ford F-150 Raptor Slash 2WD Unassembled Kit Slash 4X4 VXL Slash 4X4 Slash VXL Slash

5827X - Hold down, battery/ hold down retainer This extended battery hold down for the Slash or Slash 4x4 allows for LiPo packs of up to 42mm tall to fit in the stock battery tray. Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multi-cell batteries) Replacement part for these models: Slash 4X4 VXL Accessory part for these models: Slash 4X4 Ford F-150 Raptor Slash 2WD Unassembled Kit Slash VXL Slash

5830 - Konverteringsett LCG Lavt Tyngdepunkt 2WD Komplett lav-CG-konverteringssettet (#5830) inkluderer et blått lav-CG-chassis, svarte nerf-bars og nedre chassisplate, batteriholder, optimaliserte lav-CG-støtfjærer foran (#4458) og maskinvare. For personlig tilpasning av din 2WD Slash. Everything to convert your Slash 2WD The Low-CG Conversion Kit lowers your Slash’s 2WD chassis, battery, and electronic components for improved handling and increased corning speed. The conversion kit includes all the parts and hardware required to convert one 2WD Slash to the Low-CG configuration. QUICK FEATURES ON SLASH 2WD LOW-CG CONVERSION KIT (#5830) Complete kit, no additional parts required Lowers chassis 1.3 inches (33 mm) Over 45% lower battery position Low center of gravity enhances handling and increases cornering speed Genuine Traxxas quality and precision Performance Optimized The Low-CG chassis holds the battery and electronics as deep in the chassis as possible to position weight low in the chassis. The low-CG design dramatically increases corner speed and stability no matter where you drive.

5835 - Støtfanger med Feste Front Sort 2WD Replacement part for these models: Slash VXL Slash Slash® Brushless Unassembled Kit Slash® Brushless Slash® VXL Slash® Accessory part for these models: Slash® Brushless EHD

5836 - Støtfanger med Feste Bak Sort 2WD Replacement part for these models: Ford® F-150 Raptor Ford® F-150® Raptor Slash VXL Slash Slash® Brushless Unassembled Kit Slash® Brushless Slash® Modified Slash® VXL Slash® Accessory part for these models: Slash® Brushless EHD

5851P - Karosseri Short Course Slash 2-4WD Rosa-Lilla Er det på tide å oppgradere Slash® med et helt nytt utseende? Dette tøffe karosseriet har den hotteste ProGraphix-malingen® med forhåndspåførte dekaler. Det er ikke nødvendig å trimme karosseriet fordi Traxxas ferdigmalte karosserier er klare til montering rett ut av posen. Krever 6929 klippsløst konverteringssett når det brukes med 2WD Slash klippsløst Chassis eller 6928 klippsløst konverteringssett når det brukes med 4X4 klippsløst chassis. Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL Slash® Brushless Slash® VXL Slash®

5854 - Hub retainer for 17mm Hubs, M4 X 0.7 (4) Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469)

5862 - Big Bore Aluminum Shock Set 4p For the ultimate in bump and jump control, Traxxas Big Bore shocks are the perfect addition to your Traxxas model. Hard-anodized aluminum bodies, PTFE-coated shock bores, and titanium nitride coated shafts offer incredible durability and near frictionless operation for ultra smooth damping and long-lasting performance. Progressive rate springs for 2WD Slash are included; for best performance with Rustler, Bandit, Stampede, Craniac and Skully install the springs included with your model. Accessory part for these models: Rustler® 4X4 VXL Slash 4X4 Platinum Slash 4X4 Ultimate Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Ford F-150 Raptor Ford Fiesta® ST Rally Nitro Rustler Nitro Slash Rustler® 4X4 Rustler® VXL Rustler® Slash 4X4 VXL Slash 4X4 Slash VXL Slash Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 Stampede® VXL Stampede®

5932 - Fr Left Upper & Lower Suspension Arms Slayer This is the Upper & Lower Left Front Suspension Arm Set for the Traxxas Slayer Pro 4WD Short Course Nitro RTR FEATURES Durable black nylon construction INCLUDES One Upper Left Front Suspension Arm One Lower Left Front Suspension Arm    

5933 - Re Rt Upper & Lower Suspension Arms Slayer  This is the Upper & Lower Right Rear Suspension Arm Set        for the Traxxas Slayer Pro 4WD Short Course Nitro RTR FEATURES: Durable black nylon construction INCLUDES: One Upper Right Rear Suspension Arm           One Lower Right Rear Suspension Arm  

6444 -Spur Gear, 54 Tenner, Herdet Stål (1.0M) Wide 54-tanns Spurdrev(tannhjul) (1,0 metrisk stigning) er maskinert av herdet stål med ekstra brede ståltenner for ultimat krafthåndtering og holdbarhet. Traxxas tannhjul lar deg finjustere ytelsen til din Traxxas-modell. Endring av girforhold kan bidra til å balansere akselerasjon og toppfart for ulike kjøreforhold. Se brukerhåndboken for mer informasjon om anbefalte drevalternativer for din modell. Replacement part for these models: X-Maxx® Ultimate Accessory part for these models: E-Revo® VXL Brushless Funco® Pro Scale® Sand Car Maxx® Slash® Maxx® X-Maxx® XO-1® XRT® Ultimate XRT®

6447 - Spur Gear 46T 1.0 Metric Pitch Spurdrev for X-Maxx,Maxx og XO-1 Replacement part for these models: XO-1® Accessory part for these models: E-Revo® VXL Brushless Maxx®

6447R - Spur Gear 46T Steel Wide Face 1.0 Metric Pitch Spurdrev for X-Maxx, Maxx, E-Revo V2 og XO-1 Accessory part for these models: X-Maxx® E-Revo® VXL Brushless Maxx® XO-1®

6448R -Spur Gear, 50-tooth, steel (wide-face, 1.0 metric pitch) X-Maxx-Maxx Accessory part for these models: X-Maxx® Maxx®

6449X -Spur gear, 54-tooth, Steel (1.0M) X-Maxx Truck HD Spurdrev i stål for X-Maxx  Steel delivers the ultimate in durability and heat resistance for the X-Maxx spur gear.

6465 - Cush Drive Key/ Pin/ Elastomer Damper Replacement part for these models: E-Revo® VXL Brushless Maxx® XO-1®

6468 - Traxxas Ultra Premium Dekklim 20gr (1) Bare ett dekklim er sertifisert for bruk med 100+mph XO-1: Traxxas Ultra Premium Tire Glue. XO-1 er avhengig av en høyfast dekkbinding for å motstå utrolige sentrifugalkrefter ved hastigheter over 100 mph. Ingen andre lim tåler så høye belastninger, noe som gjør Traxxas Ultra Premium Tire Glue til det ultimate limet for ethvert dekk- og felgkombinasjon (og enhver annen applikasjon som krever en høystyrkebinding). For å bevare den maksimale bindekraften til Traxxas Ultra Premium Tire Glue, er flasken spesialdesignet for å opprettholde en tett forsegling og forhindre tilstopping. Flasken og munnstykket er laget av limbestandig materiale, og en pinne integrert i den tettsittende skrukorken sikrer at limet ikke tetter til flaskespissen. Spissens fine åpning tillater presis limpåføring hver gang du bruker Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue er spesialblandet eksklusivt for Traxxas. Det er rett og slett ikke noe bedre dekklim for høyhastighets, kraftige kjøretøyer. Det eneste limet som er Traxxas-sertifisert for 100+mph XO-1 Høyeste kvalitet cyanoakrylat (CA) lim  Fin spissåpning for presis limpåføring Tettsittende hette med tetningsstift Limbestandig flaske og spissmateriale Inkluderer to presisjonspåføringsspisser Innholder 20gram CyanAcrylat

6481X - Pinion 23T Steel 1M 5mm Aksling (1) Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) eplacement part for these models: Maxx® XRT® Accessory part for these models: XRT® Ultimate

6484X - Pinion Gear 11T Steel 5mm Aksling 1.0 Metric Pitch 11t 1M pinion for 5mm motoraksel, kan brukes på flere modeller.   Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)   Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless X-Maxx®

6485X - Pinion Gear 12T Steel 5mm Aksling 1.0 Metric Pitch 12t 1M pinion for 5mm motoraksel, kan brukes på flere modeller.   Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)   Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless X-Maxx®

6486X - Pinion Gear 13T Steel 5mm Aksling 1.0 Metric Pitch 13t 1M pinion for 5mm motoraksel, kan brukes på flere modeller.   Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)   Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless X-Maxx®

6487R - Pinion Gear 15T Hardened Steel 5mm Aksling 1.0 Metric Pitch 15t 1M pinion for 5mm motoraksel, CNC maskinert HD drev som kan brukes på flere modeller. 15-tooth machined pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Replacement part for these models: E-Revo® VXL Brushless Accessory part for these models: Maxx® X-Maxx®

6487X - Pinion Gear 15T Steel 5mm Aksling 1.0 Metric Pitch 15t 1M pinion for 5mm motoraksel, kan brukes på flere modeller. Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Replacement part for these models: E-Revo® VXL Brushless Accessory part for these models: Maxx® X-Maxx®

6488X - Pinion Gear 14T Steel 5mm Aksling 1.0 Metric Pitch 14t 1M pinion for 5mm motoraksel, kan brukes på flere modeller. Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Replacement part for these models: XO-1® Accessory part for these models: E-Revo® VXL Brushless X-Maxx®

6489X - Pinion Gear 16T Steel 5mm Aksling 1.0 Metric Pitch 16t 1M pinion for 5mm motoraksel, kan brukes på flere modeller. Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx®

6490X - Pinion 17T Steel 1M 5mm Aksling (1) Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Accessory part for these models: Maxx® X-Maxx® E-Revo® VXL Brushless

6491X - Pinion 18T Steel 1M 5mm Aksling (1) Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Replacement part for these models: X-Maxx® Accessory part for these models: E-Revo® VXL Brushless Maxx®

6492 - Pinion 29T Metall 1M 5mm Aksling (1) 29-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.  

6492X - Pinion 25T Steel 1M 5mm Aksling (1) Gear, 25-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Replacement part for these models: Maxx® Slash® Accessory part for these models: XRT® Ultimate XRT® Maxx®

6494R - Pinion 20T Hardened Steel 1M 5mm Aksling (1) 20T CNC maskinert herdet stål Pinion 1M 5mm bore The 20-tooth pinion gear (1.0 metric pitch) is machined from hardened steel for extra durability and fits 5 mm motor shafts. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Includes set screw. Accessory part for these models: Maxx® X-Maxx® E-Revo® VXL Brushless

6494X - Pinion 20T Steel 1M 5mm Aksling (1) Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Accessory part for these models: Maxx® X-Maxx® E-Revo® VXL Brushless

6496X - Pinion 24T Steel 1M 5mm Aksling (1) Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Accessory part for these models: Maxx® Slash® Maxx® X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®

6511 - Traxxas Trådløs Blåtann Modul for Tqi Radio Kompatibel med Android 4.4 eller nyere eller Apple iOS 4.3 og nyere plattformer Bruk med  Traxxas Link-appen, tilgjengelig på Google Play og App Store Se telemetri i sanntid med valgfrie sensorer Bluetooth lav energi Enkel og enkel sammenkobling av enheter Drevet av TQi-sender Integrert i senderhuset Rask og enkel installasjon, installeres på få minutter Traxxas Link trådløs modul følger med utvalgte Traxxas-kjøretøy   Enhetskrav Traxxas Link er designet for bruk med Android 4.4 eller nyere eller iOS 4.3 og nyere. Traxxas Link er kompatibel med Android-utstyrte enheter, iPhone (4S, 5, 5C, 5S), iPod touch (5. generasjon og nyere versjoner), iPad (3. generasjon og nyere versjoner) eller iPad mini. For full funksjonalitet krever Traxxas Link en Traxxas TQi-sender med Traxxas Link Wireless Module og en TQi-mottaker installert i modellen. Telemetrifunksjoner krever at Traxxas telemetrisensorer installeres på modellen din.

6520 - Turtallsensor Tqi Lang FEATURES Functions with the Traxxas Link system to display motor RPM INCLUDES Long RPM Sensor with Zip Tie and 3x4mm Button Head Cap Screws SPECS: Length: 15" (381mm)

6521 - Temperatur/Voltsensor Tqi Lang FEATURES Functions with the Traxxas Link system to display battery voltage and temperature INCLUDES Long Temperature and Voltage Sensor with Mounting Screw SPECIFICATIONS Length: 14" (356mm)

6533X - Traxxas 5 kanals Telemetri Motaker med TSM Link Oppkobling: Koble på alle ledningene og så slå på radioen med å holde SET knappen inne til det lyser rødt, slå på bilen mens du holder knappen inne på mottakeren. TQi 2,4 GHz mikromottaker bruker en integrert LINK-knapp for rask og enkel binding. En tofarget LED indikerer på- og bindestatus for sikker kontroll og bekvemmelighet. Ved signaltap vil mottakerens failsafe-programmering automatisk sette gasspjeldet tilbake i nøytral og holde den siste kommandoerte styringsposisjonen. 6533X-mottakeren har innebygd Traxxas Stability Management (TSM)-programmering. TSM gjør det enklere å kontrollere kjøretøyet ditt på glatte underlag. Slår du den ut av start, registrerer TSM kjøretøyets retning og gjør styringskorrigeringer for å gi full gassakselerasjon rett frem uten tap av kontroll. Når man tar svinger, gjør TSM intuitive korrigeringer for å opprettholde bilens linje for raskere utgangshastigheter. TSM forbedrer også bremseytelsen ved å holde forhjulene rett til de stopper helt.® Brukerveiledning for nedlasting pdf : Manual  

6535 - Temperatur Sensor Feste for ElMotor Feste til Tempsenor for elektromotor Mount, temperature sensor (electric motors)/ wire tie/ thermal pad

6538 - Telemetry Trigger Magnet Holders/Spur Gear FEATURES Black plastic and metal construction INCLUDES Two different plasting holders One disk-shaped magnet Three 8mm screws Three 10mm screws SPECIFICATIONS Magnet diameter: 5mm Magnet thickness: 2mm

6539 - Magnet Holder/Senter Diff/Magnet FEATURES Plastic magnet holder INCLUDES Magnet Holder, Center Diff Telemetry Magnet and three 3x8mm Screws

6541 - Strømkabel til Voltsensor Tqi FEATURES Replaces broken power tap connectors INCLUDES Connector with Wire and Red 2-Pin Connector and Zip Tie

6550 - Telemetri Expander modul You can make changes to radio trims and settings, input vehicle profiles, update model memory, and adjust setups for different driving conditions by means of a virtual dashboard and interactive screens. Using the complete TQi system and impressive Traxxas Link app makes pro-level transmitter tuning fast, convenient, and easy.Requires the TQi radio system with #6510 Docking Base, Traxxas Link receiver ( #6518), Apple iPhone® (3GS or newer) or iPod touch® (3rd and 4th generations), and the Traxxas Link App (latest version available free from the Apple App Store) ith the revolutionary Traxxas TQi radio system, Traxxas Wireless Link Module, and the Traxxas Link app (available free from the Apple App Store), your Apple iPhone® or iPod touch® can be transformed into a powerful tuning tool that allows you to replace the transmitter's button/LED programming system with an intuitive, high-definition, full-color graphical user interface.    Upgrade Your Traxxas Model with the TQi Telemetry Expander! Requires the TQi radio system with the Traxxas Link Wireless Module(#6511), Traxxas Link receiver(#6518), Apple iPhone (4S, 5, 5C, 5S), iPod touch (5th generation and later versions), iPad (3rd generation and later versions), iPad mini, or Android 4.4 equipped device and the Traxxas Link App (latest version available free on Google Play and the App Store) Expanded Innovation Traxxas changed the game with Telemetry allowing you to monitor and record real-time data from your vehicle. By combining the water-sealed Telemetry Expander with the GPS Module, Traxxas gives you the ability to accurately track real-time speed! The new Telemetry Expander allows you to support up to six plug-and-play "smart" sensors in addition to the three standard Traxxas sensors. There are currently three different smart sensors to select from; voltage, temperature, and GPS. The smart sensor advantage is that the Traxxas Link application automatically recognizes the sensors, so setup only takes a few moments! Install the Telemetry Expander, plug in the sensors and communication cable and prepare for Telemetry like you've never seen!   Telemetry Expander With the revolutionary Traxxas TQi radio system, Traxxas Wireless Link Module, and the Traxxas Link app (available free from Google Play or the Apple App Store), your Apple iPhone® (4S, 5, 5C, 5S), iPod Touch® (5th generation and later versions), iPad® (3rd generation and later versions), iPad Mini®, or Android® 4.4 equipped device, can be transformed into a powerful tuning tool that allows you to replace the transmitter's button/LED programming system with an intuitive, high-definition, full-color graphical user interface. You can make changes to radio trims and settings, input vehicle profiles, update model memory, and adjust setups for different driving conditions by means of a virtual dashboard and interactive screens. Using the complete TQi system and impressive Traxxas Link app makes pro-level transmitter tuning fast, convenient, and easy. Once the telemetry-ready accessories and sensors are installed, information can be viewed by selecting the dashboard from the Traxxas Link app's home screen. The application automatically detects and recognizes the installed telemetry sensors for easy setup and the Traxxas Link dashboard comes to life! All displayed data can be recorded and saved for easy play-back later so you can share it with friends and other RC enthusiasts (and so you can keep your eyes on the vehicle as you drive!).  With the Telemetry Expander, including a powerful communication cable and a series of plug-and-play sensors, installation and operation of the telemetry system using Traxxas Link becomes almost effortless. Traxxas Link recognizes the smart sensors automatically. No parts have to be replaced or swapped—setup only takes a few minutes! Install the Expander, plug in the communication cable and sensors, replace and seal all covers, and prepare to be amazed!   TRAXXAS TELEMETRY EXPANDER (#6550) FEATURES   Powerful communication cable for linking to the receiver Installs quickly and easily; no parts to replace or swap Waterproof case keeps the expander safe from the elements Six available ports for connecting auto-detectable plug and play sensors Ready to accept plug-in GPS Speed Module (part #6551, sold separately)     TRAXXAS TELEMETRY OPTIONS Part#  Description   6550 Telemetry Expander   6551 Telemetry GPS Module   6526 Temperature Sensor, Auto-Detectable   6527 Voltage Sensor, Auto-Detectable   TELEMETRY EXPANDER MOUNTING KITS Part#  Models   6554 Rustler, Bandit, Slash 2WD   6555 Slash 4X4, Stampede 4X4, Rally, Jato   6556 XO-1, E-Revo*, Summit*, all Maxx trucks, Revo 3.3, Slayer Pro 4X4   6557 Stampede 2WD   6558 Funny Car, Nitro 4-Tec   6559 Spartan     *Requires part #5632   MODEL 6550: TQi Telemetry Expander Module  Click here to learn more about the TQi GPS Speed Module (#6551, sold separately).  

6550X - Traxxas TQI Telemetri Expandermodul 2.0 Traxxas models equipped with the TQi radio system: The Telemetry Expander 2.0 connects directly to the TQi receiver using the supplied 6525 communication link cable. X-Maxx, E-Revo, and Unlimited Desert Racer: Install the Telemetry Expander 2.0 and GPS Module for even more accurate speed measurements compared to the built in speed output from the VXL 6S and VXL 8S electronic speed controls. Plus, add the ability to install additional sensors to monitor parameters such as motor temperature. The Telemetry Expander connects directly to the VXL-6S or VXL-8S electronic speed control using the new Traxxas Data Link Cable 6566 (sold separately). Using the 6566 cable is a plug-and-play solution that conveniently eliminates the need to open the waterproof receiver box to add additional cables. Vehicles equipped with the 6590 High Voltage power amplifier: The 6590 High Voltage Power supply is used for lighting accessories such as the 8485 off-road lighting set for the Unlimited Desert Racer. The 6550X Telemetry Expander can be conveniently connected directly to the 6590 high voltage power amplifier using the new 6565 Data Link Cable (sold separately). This provides a quick and easy plug-and-play connection without having to open the waterproof receiver box to add additional cables.   Sealed, waterproof design Provides real-time telemetry data with up to 3 temperature and 3 voltage sensors Connects via communication cable to #6533 receiver, #6590 Power Amplifier*, or directly to VXL-6s* and VXL-8s* ESCs Compatible with existing vehicle mounts and smart sensors Traxxas telemetry changes the game by allowing you to monitor and record real-time data from your vehicle while you drive. Add the GPS module to the water-sealed Telemetry Expander and track the actual speed of your vehicle in real-time! The Telemetry Expander accepts up to six auto-detectable sensors in addition to the three standard Traxxas sensors. There are currently three auto-detectable sensors to select from: voltage, temperature, and GPS. The Traxxas Link application automatically recognizes sensors, so setup takes only a few moments! Advanced communication bus technology allows you to connect the telemetry expander to your TSM receiver or to your High-Voltage Power Amplifier, or directly to the VXL-6s and VXL-8s electronic speed controls with optional data cables. Install the Telemetry Expander, choose your sensors, and prepare for an all-new RC driving experience! Important Note The new GPS Module 2.0 (#6551X) and Telemetry Expander 2.0 (#6550X) replace the original Telemetry Expander (#6550) and GPS Module (#6551). The originals are not compatible with the new 2.0 versions.    

6553X - Traxxas TQi Telemetry Expander 2.0 and GPS Module 2.0 Conversion Kit Traxxas TQi Telemetry Expander 2.0 and GPS Module 2.0 Conversion Kit! TRAXXAS TELEMETRY EXPANDER KIT (#6553X) FEATURES: Includes receiver data cable (optional data cables available) Installs quickly and easily; no parts to replace or swap Waterproof case keeps the expander safe from the elements Six available ports for connecting additional temperature and voltage sensors Uses GPS and GLONASS global positioning for accurate, real-time speed Speed readout not affected by gear ratio or tire-size Requires the TQi radio system with Wireless Module (#6511), TSM receiver (#6533), Apple device running iOS 7.0 or higher, or Android-equipped device with Android 4.4 and higher, and the Traxxas Link App (latest version available free on Google Play and the App Store) Expanded Innovation Traxxas telemetry changes the game by allowing you to monitor and record real-time data from your vehicle while you drive. The waterproof Telemetry Expander 2.0 includes the GPS Module 2.0 for the most accurate speed possible and accepts up to six additional auto-detectable sensors. The Traxxas Link app automatically recognizes sensors, so setup takes only a few moments! Advanced communication bus technology allows you to connect the telemetry expander to your TSM receiver or to your High-Voltage Power Amplifier, or directly to the VXL-6s and VXL-8s electronic speed controls with optional data cables. Install the Telemetry Expander, choose your sensors, and prepare for an all-new RC driving experience! Important Note The new GPS Module 2.0 (#6551X) and Telemetry Expander 2.0 (#6550X) replace the original Telemetry Expander (#6550) and GPS Module (#6551). The originals are not compatible with the new 2.0 versions. More info @ Traxxas!  

6592 - Power module, Pro Scale® Advanced Lighting Control System (includes mount, communication cables, hardware) Replacement power module for the Pro Scale® Advanced Lighting Control System Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

6593 - Distribution Block, Pro Scale® Advanced Lighting Control System Replacement distribution block for the  Pro Scale® Advanced Lighting Control System Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

6594 - Kommunikasjonskabel PRO Scale Lys system Replacement communication cable for the Pro Scale® Advanced Lighting Control System Traxxas 6594 Receiver communication cable, Pro Scale® Advanced Lighting Control System   ccessory part for these models: TRX-4® 1979 Chevrolet® Blazer® TRX-4® 1979 Ford® Bronco® TRX-4® Chevrolet® K10 High Trail Edition™ TRX-4® Equipped with Traxx® TRX-4® Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™ TRX-4® Land Rover® Defender® TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6 TRX-4® Land Rover® Defender® TRX-4® Unassembled Kit

6716 - Karosseribeskytter Skumgummi sett med 12 stk 2mm (4)/ 3mm (4)/ 4mm (4) Body washers, foam, 2mm (4)/ 3mm (4)/ 4mm (4) Adhesive-backed foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure mounting and less rattling.

6717 - Lexan karosseri for Rustler 4x4 (Klart med Dekaler) 1/10 Tilpasset og klippet ullakket lexankarosseri for 1/10 Stadiumtruck. Leveres med vindumaskering og dekaler. Lengde: 430mm Bredde: 140mm Hjulbase: ca 290mm Body, Rustler® 4X4 (clear, requires painting)/ window, grille, lights decal sheet Accessory part for these models: Rustler® 4X4 VXL Rustler® 4X4

6721 - Bakvinge for Rustler 4x4 (1) med festeskruer 3x8mm Replacement part for these models: Rustler® 4X4 VXL Rustler® 4X4

6727X - Batteri Lås (Holder) Multi Stampede 4x4  Batteriholder for Stampede 4X4 som gjør det mulig for batteripakker på opptil 42 mm høye å passe inn i batteriholderen. Inkluderer forhøyet hold nede, stolpe og karosseriklips. Hold down, battery/ hold down retainer/ battery post/ angled body clip (allows for installation of taller, multi-cell batteries) Accessory part for these models: Stampede® 4X4 VXL

6731 - Bærearmer Foran/Bak Telluride/Rally 4x4 1 stk høyre, 1 stk venstre FEATURES Plastic construction Fits front and rear suspension INCLUDES One each, Left and Right Suspension Arm  Replacement part for these models: Ford® Fiesta® ST Rally

6737 - Støtfanger og Feste Bak Rustler 4x4 Bumper, rear/ bumper mount, rear Replacement part for these models: Rustler® 4X4 VXL Rustler® 4X4

6738 - Shock Tower Rear  Rustler/Hoss 4x4 Støtdempertårn bak for Rustler og Hoss 4x4 Replacement part for these models: Hoss™ 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4      

6738X - Shock Tower Rear 7075-T6 Aluminium Rustler/Hoss 4x4 Støtdempertårn bak for Rustler og Hoss 4x4 Accessory part for these models: Hoss™ 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4      

6739 - Shock tower, front, Rustler 4x4 Replacement part for these models: Rustler® 4X4 VXL Rustler® 4X4

6741 - Cover Center Driveshaft Clear Clear Driveshaft Cover for the Traxxas Stampede/Telluride 4x4. FEATURES Constructed of clear plastic INCLUDES One rear shaft cover

6742R - Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2) Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1) Traxxas TUBES aluminum toe links are lighter than steel and stronger than titanium. The secret lies in their unique hollow tube design which maximizes rigidity while reducing weight. Made from high-grade 7075-T6 aluminum, TUBES feature a brilliant anodized finish for extra style. A handy machined groove identifies the left-hand threads and the included aluminum wrench helps prevent marring while adjusting the turnbuckles. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 XO-1®

6743 - Camber Link Set Front/Rear Camber Link Set for the Traxxas Telluride 4x4   FEATURES Plastic construction Fits front and rear suspension Non-adjustable INCLUDES Two Front and two Rear Camber Links Two Plastic Inserts Replacement part for these models: Ford® Fiesta® ST Rally Traxxas Telluride 4x4

6745 - Pinion Gear 32P 9T for 3.17mm Aksling FEATURES: Machined Steel Designed for a 3.17mm shaft INCLUDES: One 9 tooth Pinion Gear           One 3 x 4mm Set Screw REQUIRES: 1.5mm hex wrench to tighten set screw.

6746 - Pinion Gear 32P 10T for 3.17mm Aksling FEATURES: Machined Steel Designed for a 3.17mm shaft INCLUDES: One 10 tooth Pinion Gear           One 3 x 4mm Set Screw REQUIRES: 1.5mm hex wrench to tighten set screw.

6747 - Pinion Gear 32P 11T for 3.17mm Aksling FEATURES: Machined Steel Designed for a 3.17mm shaft INCLUDES: One 11 tooth Pinion Gear           One 3 x 4mm Set Screw REQUIRES: 1.5mm hex wrench to tighten set screw.

6756 - Driveshaft/Center/Plastic Blue/Screw Pin Center Driveshaft for the Traxxas Telluride 4x4 FEATURES Plastic construction, blue in color INCLUDES Center Driveshaft with steel Screw Pin

6757 - Rebuild Kit Driveshafts 6851R og 6852R Rep sats for oppgraderingsakslinger 6851R og 6852R Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware) Replacement part for these models: XO-1 Accessory part for these models: Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Craniac® Nitro Rustler Nitro Sport Nitro Stampede Rally VXL Rustler 4X4 VXL Rustler 4X4 Rustler VXL Rustler Skully Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Stampede 4X4 Unassembled Kit Stampede 4x4 VXL Stampede 4x4 Stampede VXL Stampede

6760 - Driveshaft Assembly Front Heavy-Duty Front Driveshaft Assembly for the Traxxas Telluride/Rally 4x4 FEATURES Plastic and steel construction Assembled and ready to install INCLUDES Left or Right Front Driveshaft Sections with Screw Pin Replacement part for these models: Ford® Fiesta® ST Rally

6761 - Driveshaft Assembly Rear Heavy-Duty Rally-Telluride Rear Driveshaft Assembly for the Traxxas Telluride- Rally 4x4 Rear driveshaft comes assembled and ready to install with screw pin. Fits left or right side. FEATURES Plastic and steel construction Assembled and ready to install INCLUDES Left or Right Rear Driveshaft Sections with Screw Pin

6765 - Driveshaft Center Aluminum Hoss/Rustler 4x4   Formed from 6061-T6 aluminum, this 189 mm center driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies to eliminate play. The vivid anodized finish features a laser-etched Traxxas logo for extra style.  Requires 6888X drive hub if upgrading from composite driveshaft.   Replacement part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Accessory part for these models: Rustler® 4X4  

6766 - Drev Clutchkobling komplett Complete Gear Clutch for the Traxxas Telluride 4x4. FEATURES Plastic and steel construction Assembled and ready to install INCLUDES Complete High Stall Gear Clutch

6773 - Dekk og Felg Talon Extreme 2.8" (2) Foran eller bak på 4WD, 2WD foran Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon Extreme tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated) Størrelse: Høyde : 112mm Bredde: 58.5mm Offsett : 30mm Hex : 12mm Bolt : 5mm Replacement part for these models: Rustler® 4X4 Accessory part for these models: Rustler® 4X4 VXL Rustler® VXL Rustler®

6773A - Dekk Talon Extreme og Felg RXT Orange 2.8" (2) Foran eller bak på 4WD, 2WD foran Tires & wheels, assembled, glued (2.8") (RXT orange wheels, Talon Extreme tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated) Størrelse: Høyde : 112mm Bredde: 58.5mm Offsett : 30mm Hex : 12mm Bolt : 5mm Accessory part for these models: Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Rustler®

6773G - Dekk Talon Extreme og Felg RXT Green 2.8" (2) Foran eller bak på 4WD, 2WD foran Tires & wheels, assembled, glued (2.8") (RXT green wheels, Talon Extreme tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated) Størrelse: Høyde : 112mm Bredde: 58.5mm Offsett : 30mm Hex : 12mm Bolt : 5mm Accessory part for these models: Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Rustler®

6774 - Dekk og Felg Talon Extreme 2.8" Bak 2WD (2) Bak på 2WD Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon Extreme tires, foam inserts) (2WD electric rear) (2) (TSM rated) Størrelse: Høyde : 112mm Bredde: 58.5mm Offsett : 22mm Hex : 12mm Bolt : 5mm Accessory part for these models: Rustler® VXL Rustler®

6776 - Wheelie bar Rustler 4x4 Replacement part for these models: Rustler® 4X4 VXL Accessory part for these models: Rustler® 4X4

6777 - Rear Wheelie Bar Mounts/Skid Plate (Black) Bakfanger for Trx rally, Stampede 4x4 Replacement part for these models: Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4 Rally 1/10 4x4 

6778 - Kronhjul 47T og Pinion 12T FORAN Kronhjul og Pinion Foran for Traxxas Stampede 4x4, Rustler 4x4, Slash 4x4 med børstemotor. Ring gear, differential/ pinion gear, differential (12/47 ratio) (rear) Replacement part for these models: Rustler® 4X4 Slash 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4

6779 - Kronhjul 47T og Pinion 12T BAK Kronhjul og Pinion BAK for Traxxas Stampede 4x4, Rustler 4x4, Slash 4x4 med børstemotor. Ring gear, differential/ pinion gear, differential (12/47 ratio) (rear) Replacement part for these models: Rustler® 4X4 Slash 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4

6781 - Aluminiumshus for Senter Differensial 6780 Erstatningshus av aluminium for 6780 senterdifferensial inkluderer ringgirpakning, X-ringpakninger (2), foringer (4), 5x10x0,5 mm skive (1) og 2,5x10 mm skruer med gjengelås (4) Accessory part for these models: Ford® F-150® Raptor R™ 4X4 Hoss® 4X4 VXL Rustler® 4X4 Brushless Rustler® 4X4 Ultimate Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL Stampede® 4X4 Brushless Stampede® 4X4 VXL Rustler® 4X4 VXL

6787 - Skruesett Traxxas 4x4 1/10 STD Gi din Traxxas-modell en fullstendig oppfriskning med dette erstatningsmaskinvaresettet. Traxxas skruesett erstatter skruene og festene på kjøretøyet ditt med ny fabrikkferskeskruer. Individuelle rom holder alt organisert med en hendig etikett for å måle og identifisere delene.  Ikke all maskinvare er kompatibel med BL-2s-modeller.   Svart oksidbelegg for forbedret rustmotstand Tøffe hex-drive hoder Individuelle boksrom Praktisk etikett for å identifisere maskinvare   Tilbehørsdel for disse modellene: Hoss® 4X4 VXL Rustler® 4X4 Ultimate Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash® 4X4 Ultimate Slash® 4X4 VXL Stampede® 4X4 VXL

6792 - Sledgehammer Extreme 2.8" Hjul Sort Felg12mm Hex (2) Ekstreme terrenghjul Sledgehammer ekstreme terrengdekk gir maksimal trekkraft og kontroll på forskjellige overflater. Sledgehammerens høye sidevegg og tøffe 2,8 tommers felg gir ekstra bakkeklaring, mens slitebanens design med åpen blokk fjerner gjørme og rusk for uovertruffen trekkraft på løse overflater. Sledgehammerhjulene kommer montert og forhåndslimt med skuminnsatser for problemfri, ut-av-boksen bolt-on trekkraft. TSM®-klassifisert for høyhastighetsapplikasjoner. Passer 12 mm sekskant, 4WD foran eller bak, kun 2WD foran. Accessory part for these models: Hoss® 4X4 VXL Stampede® 4X4 Brushless BIGFOOT® No. 1 Officially Licensed Replica Rustler® 4X4 Brushless Rustler® 4X4 Ultimate Rustler® 4X4 VXL Rustler® 4X4 Rustler® VXL Rustler® Stampede® 4X4 VXL Stampede® VXL Stampede®

6811X - Short Course Karosseri Pro Graphix 1/10 Short Course karosseri som passer mange 1/10 biler som Traxxas Slash 2-4WD, kan også tilpasses Arrma Senton Fra mild til vill, velg dine egne farger for å tilpasse karosseriet. Den detaljerte grafikken er ferdig malt, men resten av karosseriet er klart, så du kan velge din egen hovedfarge. Bare ta en boks med lexanlakk og spray den endelige fargen. Det er enkelt for alle å få umiddelbart, profesjonellt resultat. Traxxas ProGraphix-karosserier kommer ferdig klippet og hullet for enkel installasjon. Det er også påført en beskyttende oversprayfilm på kroppen. Dekaler følger også med i settet.  Krever clipless konverteringssett 6929 når det brukes med 2WD Slash clipless chassis eller clipless konverteringssett 6928 når det brukes med 4X4 clipless chassis. Spesifikasjoner: Lengde : 540mm Bredde Foran : 285mm Bredde Bak : 300mm Høyde : 145mm Hjulbase : 330-335mm   Replacement part for these models: Slash Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL Slash® Brushless Slash® VXL Slash®

6814 - Differential Kit, Center (Complete) The optional center differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions and maximum corner speed. The sealed differential can be adjusted by using different fluid viscosities for specific driving conditions. The center differential comes fully assembled and ready to install with 50-T, 52-T, and 54-T spur gears. Center differential kit requires 32-pitch pinion gear. Accessory part for these models: Ford® Fiesta® ST Rally Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 Unassembled Kit Stampede® 4X4 VXL Stampede® 4X4