RC-BILER OG DELER

Tamiya 19808282 - Bærearmsett Nedre Høyre-Venstre SRB-Super Champ Venstre og høyre Nedre bærearm til Tamiya biler på SRB og Super Champ chassis. 47304 Fighting Buggy (2014) Chassis:  Super Champ Release date:  12 Sep 2015 58441 Buggy Champ 2009 Chassis:  SRB Release date:  15 Jul 2009 58452 Sand Scorcher Chassis:  SRB Release date:  24 Feb 2010 84163 Buggy Champ Chassis:  SRB Release date:  08 Jan 2011 84164 Sand Scorcher Chassis:  SRB Release date:  18 Dec 2010 84187 Buggy Champ, Silver Edition Chassis:  SRB Release date:  28 May 2011 84389 Fighting Buggy (2014) Chassis:  Super Champ Release date:  01 Oct 2014    

Tamiya 22023 - TT-02 Chassis Cover Set (OBS passer ikke TT-02B) ill.foto- Chassis er ikke med ★This 0.8mm thickness polycarbonate set features a chassis cover and wheel well liners to protect your TT-02 chassis from the intrusion of dust and dirt, reducing damage and easing your maintenance of the model. ★Also included is a cover for the receiver switch and touch fastener tape. ★Not for use with Item 54549 and 54733 with short wheelbase cars.   ★Left: Image shows an example of this product fitted to the TT-02 Chassis from separately-sold Item 58659. ★Right: Polycarbonate cover and front wheel well liners are a snug fit, and affixed using touch fastener tape. Screws are included.   Compatible Chassis TT-02, TT-02D, TT-02FT, TT-02 Type-S & TT-02 Type-SR Chassis *May come into contact with tires when using with short wheelbase and Item 54549 and Item 54733. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of December 20, 2021. Specifications are subject to change without notice.

Tamiya 22043 - Aluminiums Hjul Huber for Hornet-Grasshopper-CW-01 ★Stilige blå anodiserte aluminiumsdeler kan brukes i stedet for standard plastkomponenter. ★De gir forbedret holdbarhet og mer presist feste for hjulene. ★Klemmedesign minimerer risikoen for utilsiktet å skru seg løs. ★Kompatibel med modellene Hornet, Grasshopper, Frog, Lunch Box, Monster Beetle, Subaru Brat og Fast Attack Vehicle. ※Ikke kompatibel med modellene Buggy Champ, Sand Scorcher og Fighting Buggy. Er mer slitesterke enn standardkomponentene i plastikk og har et design som gjør det vanskeligere for hjulene å løsne under bruk. Innhold: 2 x Hjulhuber, tverrpinner, låseskruer + verktøy ★An example of attachment on The Hornet. ★ An example of attachment on the Lunch Box.

Tamiya 22067 - TH 10-Spoke Wheels (White) (24mm Width, Offset 0) (4) 4 pkn 52x24mm touring/drift felger med 12mm hex. Hop-Up Options no.2067 TH 10-Spoke Wheels (White) (24mm Width, Offset 0) Item No: 22067   ★These are 10-spoke wheels with reinforced ribs for superior durability, ideally suited to the TG10-Mk.2 glow engine R/C car chassis. ★They can also be used on compatible electric R/C touring car models. ★Contents: wheels x4; white, 24mm width, offset: 0. Compatible Chassis TT-01D Type-E*1, TT-02 Type-S, TT-02 Type-SR, TT-02D*1, TRF419, TRF419X, TRF419XR, TRF420, TRF420X, TG10-Mk.2FZ, TG10-Mk.2FN, TC-01, TB-03, TB-03 VDS*1, TB-04, TB-04 PRO TB-05 PRO, TB Evo.6, TB Evo.6 MS, TB Evo.7, TA05 Ver.II, TA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TA07 MSX, TA08 PRO, FF-03, FF-03 PRO, FF-04 EVO, F103GT & TT-02 Type-SRX Chassis *1: Use with Item 54020. Other chassis' compatible tires: Items 51023, 51049, 53433, 53705, 54256. Compatible tire inserts: Items 53434, 53435, 53582. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of March 3, 2023. Specifications are subject to change without notice.  

Tamiya 22068 - BB-01 63mm Drivakslinger BBX (2) Drivakslinger for BB-01 chassis, (BBX) (Sving Shafts) Om : ★ Laget i karbonverktøystål, disse presisjon lagde svært holdbare svingakslene er for bruk i montering av universalledd; de gir utmerket holdbarhet. ★Settet inneholder to akslinger. ★ Bildet til under viser et eksempel på installasjon.

Tamiya 22070 - BB-01 Aluminium Servofeste BBX Servofeste i aluminium for BB-01 chassis, (BBX) Om delene: ★Disse aluminiumsfestene kan brukes i stedet for standard plastdeler, og gir enda mer responsiv styring. ★De er presisjonsutformet og svært holdbare, og brukes på hver side av chassiset. ★ Komponentene har en sølv anodisert finish.

Tamiya 22077 - 1 piece Hornet Large Diameter Wheels Front/Rear 1 sett med felger for bruk på bl.a Hornet, Grasshopper 1 sammen med standard 1/10 dekk slik som 50476-54598 ★These are 10-spoke wheels with reinforced ribs for superior durability, ideally suited to the TG10-Mk.2 glow engine R/C car chassis. ★They can also be used on compatible electric R/C touring car models. ★Contents: wheels x4; white, 24mm width, offset: 0.

Tamiya 22092 - DT-04 Kulelagersett Kulelagersett bestående av : 10 x 1150 kulelagre (alternativ løse 12156, pakke med 2 stk 4611 pakke med 16stk 54579 4 x 1050 kulelagre  (alternativ løse 12155 , pakke med 2 stk gummitettet 5115 ) 4 x 850 kulelagre    (alternativ løse 12160 ) Ball bearings are a great first step in tuning up your chassis, reducing friction in the drivetrain and giving longer drivetimes as well as lessening wear and tear. 850 size ball bearings are used in the steering linkage. ★Contents: 1150 ball bearings x10, 1050 and 850 ball bearings x 4 each.

Tamiya 310440610 -  Grå Felger for Felgkapsel 19803474-19335704 2 stk 30mm felger støpt i grått, må brukes sammen med 19803474-19335704  

Tamiya 310445825 -  Grå 26mm Felger for Felgkapsel 19803474-19335704 2 stk 26mm felger støpt i grått, må brukes sammen med 19803474-19335704  

Tamiya 319000834 - E-Parts Bag 58618-47419 Karosserifester, Differensialbeskytter, Støtfanger Bak ++ for Monster Beetle

Tamiya 319335704 -  "Fuchs" Grå Felgkapsler for Felg 310440610-310445925 4 stk Navkapsler/Felgkapsler støpt i grått, Porsche look, må brukes sammen med 310440610-310445925 12mm hex

Tamiya 319805182 -  Front Tire 1.9" (2) 2 stk framdekk for bl.a Grasshopper II, 58056, 58643, 47471 + noen flere modeller, sjekk manualen din. Spesifikasjoner: Høyde : 74mm Bredde : 18mm For felg 1.9" ca 49mm

Tamiya 319805183 -  Rear Tire 1.9" (2) 2 stk Bakdekk for bl.a Grasshopper II, 58056, 58643, 47471, 47458, 47459, 58706 + noen flere modeller, sjekk manualen din. Spesifikasjoner: Høyde : 82mm Bredde : 35mm For felg 1.9" ca 49x30mm

Tamiya 41709 - Fiat Abarth 1000 TCR Berlina Corse 210mm WB Klart 1/10 karosseri i lexan med hardplastdeler (PC-ABS) Motor, Speil, Lykteringer , Motorlokk, dekaler medfølger Samme karosseri som medfølger MB-01 58721 Spesifikasjoner: Lengde : 355mm Bredde : 155mm Høyde : 115mm Hjulbase : 210mm

Tamiya 47330 The Bigwig 4WD 2017 Kit Dette er release av orginalen fra 1986 Nødvendig tilbehør: 1 x servo Radio/Motaker Regulator (ESC kompatibel med 25T GT tuned motor)Vi kan anbefale denne HW1060 Batteri/Lader Ønsket lakk til lexan karosseri PS Enkel starterpakke med Radio/Motaker, Servo, 7.2V 2000mAh Nimh Batteri med enkel USB lader ( M-STYLE ) Se under relaterte produkter for anbefalt tilbehør:   Specifications ★Length: 390mm ★Width: 235mm ★Height: 140mm ★Approx Weight: 1,340g (excludes R/C equipment) ★Wheelbase: 262mm ★Tread (F/R): 200mm/198mm ★Tire Width/Diameter: 30mm/88mm (Front), 38mm/88mm (Rear) ★ABS Resin Bathtub Frame ★Shaft-Driven 4WD ★3-Bevel Differential Gears ★Rack & Pinion Steering ★4-Wheel Independent Double Wishbone Suspension ★CVA Oil Dampers x4 ★Gear Ratio = 8.7:1 or 10.04:1 ★GT-Tuned Motor Included (features unique sticker) ★Requires Electronic Speed Controller (sold separately) Separately Required Items ★2-Channel R/C Unit with ESC ★Battery Pack & Charger,  ★R6/AA/UM3 batteries for transmitter The extremely stable shaft-driven 4WD drive train has excellent efficiency thanks to full ball bearings, while differential gears ensure cornering is smooth. 4-wheel independent double wishbone suspension employs A-shaped front and H-shaped rear arms for excellent durability, with CVA oil dampers for high-quality suspension stroke. Dish wheels are not just aesthetically pleasing, but also practical on the off-road surfaces the Bigwig (2017) calls home; they are paired with grippy oval bock tires. The rack and pinion steering setup remains unique to the Bigwig among Tamiya R/C cars. The Tamiya one of a kind classic is back! The BIGWIG 4WD off-road buggy was released back in 1986 to commemorate 10 years of Tamiya R/C models and was the first Tamiya car with a body designed by an outside designer: Japanese full size race car designer and team owner Takuya Yura. This re-release version is based closely upon the original, with some tweaks to bring it up to date. The Tamiya one of a kind classic is back! The BIGWIG 4WD off-road buggy was released back in 1986 to commemorate 10 years of Tamiya R/C models and was the first Tamiya car with a body designed by an outside designer: Japanese full size race car designer and team owner Takuya Yura. This re-release version is based closely upon the original, with some tweaks to bring it up to date. Ready to Go Big The Bigwig is back! This is a 2017 version of the shaft-driven 4WD buggy that was released to commemorate 10 years of Tamiya R/C models back in 1986. It features a number of updates while keeping largely to the classic design of the original. The slimline body is that penned for the 1986 Bigwig by famed Japanese designer Takuya Yura, still a classic today, and which possesses advanced aerodynamics thanks to his encyclopaedic design knowledge. Updated markings retain the flavor of the original Bigwig, and include the Mooncraft logo of Yura’s design company. Body design: Takuya Yura Takuya Yura is a highly-regarded Japanese designer, active in many fields and known particularly for his racing car designs. He is President of the Mooncraft company. King of the Off-Road

Tamiya 47348 1/10 Grasshopper Candy Green Edition Kit Candy Green Edition kit fra Tamiya, du trenger i tillegg. Drev for bruk sammen med 540motor 18t 32P 0.8M Du trenger i tillegg. 1 x servo Radio/Motaker Regulator/ESC : Vår anbefaling : Quicrun HW1060  Klarlakk hvis man vil ha blank finish Kulelager som option: 1150 x 9 stk 850 x 1 stk Se under relaterte produkter for anbefalt tilbehør: This is Candy Green Edition Grasshopper RC Kit. The original Grasshopper was released in 1984 which instantly became a hobby car kit hit throughout the 1980’s and 90’s. Even today it is one of Tamiya’s most successful kits thanks to its ease of assembly and fun driving capabilities.   Type Detail Scale 1/10 Construction type Assembly kit Terrain use Off-Road Drive-train 2WD Drive type Gearbox Drive line Solid axle Differential type Gear Suspension Independent swing axle front and rigid axle rear suspension Steering mechanism Direct servo Shock damper Friction damper Shock damper material Plastic Tire type Rubber Tire tread Grooved front/paddle rear Body material ABS Plastic Chassis material Plastic Electronic Speed Control (ESC) Not Included ESC model n/a LED Light buckets No LED lights No Motor 380-brushed type Bearings Plastic bushing Adjustable camber Fixed Adjustable toe angles Front only Adjustable ground clearance Fixed Adjustable gear ratio Fixed Adjustable wheelbase Fixed Adjustable track width Fixed Adjustable shock angle Fixed Special feature 1   Special feature 2   Special feature 3 The simple but tough 2WD chassis features a monocoque setup that can absorb any type of rough handling. Special feature 4   Requires A 7.2 battery & charger Requires B 2-channel radio gear   The best-selling 1/10, 2WD electric Grasshopper Kit is now available in a Candy Green version that's tailor-made for terrific off-roading! Highlights include a powerful 380 motor, a TBLE-02S ESC, grooved front tires, sand paddle rear tires, five-spoke white wheels, direct-to-servo steering and much, much more. • ABS resin tub chassis. • Two-wheel solid axle rear drive. • 380-size brushed motor, upgradable to a 540 motor (sold separately) for even more power. •  Molded plastic body is painted Candy Green and fastens to the chassis with screws. • Plastic-body friction shocks. • Direct-to-servo steering with servo saver. • Reinforced resin front bumper. • Front swing axle and rigid rear axle suspension, plus a rear straight axle with differential. • Gear differential. • Sealed gearbox. • Grooved front and sand paddle rear tires. • 1.6" (41 mm) diameter three-piece five-spoke white wheels. • Fixed camber. • Adjustable front toe-in. • Full set of plastic bushings.

Tamiya 47350 1/10 Top Force 2017 4WD Kit Top Force er tilbake, dette er RE-Release byggesett av 1991 modellen. Nødvendig tilbehør: Radio/Motaker Regulator (HW1060-1080)  Servo Batteri/Lader Lexan Lakk Vi anbefaler kulelager om bilen skal brukes denne trenger 16 stk 1150 (5x11x4mm) og 10 stk 850 (5x8x2.5mm) lager. Special Edition R/C Product 1/10 R/C Top-Force (2017) Item No: 47350 Length: 400mm. Image shows assembled and painted kit.   Re-release of a Commemorative Model The Top-Force was originally produced in 1991 to mark Tamiya's 100th R/C product release. Lessons learned in actual races were incorporated into this buggy, including features such as the low, wedge-shaped body, large rear wing with built-in flaps, and underbody cowling. Square spike tires give the Top-Force excellent traction on any surface.   Race-Ready Off-Road Buggy The simple and practical FRP double deck frame sees components mounted on the lower deck for a low center of gravity. Both front and rear gearboxes are equipped with precision-made ball differentials, which give limited slip diff. effect and provide awesome cornering ability. Hard propeller shaft and universal shafts increase power transmission efficiency for faster lap times. The suspension system features adjustable upper arms that allow camber angle customization and metal bearings in the steering arms ensure sharp steering response.   Specifications ●Length: 400mm ●Width: 249mm ●Height: 187mm ●Wheelbase: 270mm ●Tread: (Front) 217mm, (Rear) 205mm ●Minimum Ground Clearance: 32mm ●Tire Width/Diameter: (Front) 32/82mm, (Rear) 41/82mm ●2mm FRP Double Deck Frame ●Shaft-Driven 4WD ●Front/Rear Ball Differentials ●3-Piece Steering Tie Rod ●4-Wheel Double Wishbone Suspension ●Gear Ratio: 8.59 (Standard) ●Type 540 Motor ●Electronic Speed Controller   Separately Required Items ●2-Channel R/C Unit with ESC ●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter Information is current as of June 5, 2017. Specifications are subject to change without notice.

Tamiya 47372 1/10 Subaru Impreza Mexico 04 (Solberg) TT-01E 4WD Kit  Petter tok fem seiere i Rally Mexico. Dette er bilen fra det tredje løpet. Nå har vi fått den som byggesett i et begrenset opplag. Chassis er TT-01 Type-E, med motor og batteri festet i lav høyde. Dette for å oppnå et lavere tyngdepunkt, med en optimalisert balanse.  Leveres med torque tuned motor og TBLE-04S regulator. Limited Edition byggesett av Subaru Impreza Mexico 04 Petter Solberg Edition, du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) * ved valg av lipo må overgang AM-8003 benyttes eller lodde om ESC til t-plug/Deans. Se anbefalt tilbehør under relaterte produkter. 1/10 R/C Subaru Impreza Mexico 2004 (TT-01 Type-E) Item No: 47372   Length: 441mm. Image shows assembled and painted kit. A Classic Returns! Subaru were once again a force to be reckoned with on the 2004 rally circuit, their Impreza taking 5 wins in the capable hands of Petter Solberg. This assembly kit creates an R/C model of the Impreza which took part in the third race, in Mexico. A durable polycarbonate body recreates the distinctive form of the car, with separate molded parts for the side mirrors and rear wing. Stickers are included in the kit to depict the numerous markings on the car. Evolved Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color dish wheels are paired with treaded tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E! Specifications ★Length:441mm, Width: 185mm, Height: 137mm ★Wheelbase: 257mm ★Tire Width/Diameter: 27/67mm ★Bathtub Type Chassis Frame ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD ★F/R 3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio=8.35:1 ★Type 540 Motor ★Requires an Electronic Speed Controller Separately Required Items ★2-channel R/C system with ESC ★Battery pack and charger ★Batteries for transmitter Information is correct as of July 6, 2018. Specifications are subject to change without notice.

Tamiya 47381 1/10 Super Astute (2018) Kit Nødvendig tilbehør: 1 x servo Radio/Motaker Batteri/Lader Ønsket lexanlakk PS Motor og Regulator(ESC) Se under relaterte produkter for anbefalt tilbehør: Length: 379mm. Image shows painted and assembled kit.   A Super Legend This re-release version of the Super Astute 2WD buggy assembly kit features updates while keeping largely to the design of the original released in 1991. It features a 2.5mm thickness FRP chassis with low center of gravity, plus 4-wheel double wishbone suspension employing CVA oil dampers, while metal bearings in suspension and steering linkage give sharp steering response. The built-in TTC (Tamiya Traction Control) system protects gears from impacts and gives stable drive, even on low-grip surfaces, allowing full enjoyment of the off-road. An efficient 0.5 module gear is included. High-traction front rib-spike and rear square spike tires provide superb response and awesome cornering. The model comes with a durable and lightweight polycarbonate body and rear wing, plus a protective undercowl.   Introducing the TTC The TTC (Tamiya Traction Control system) both protects internal gears from impact and limits wheelspin for a more stable drive. Setup is simple, and can be performed with the unit attached to the model, removing the cap on the gearbox cover then adjusting the lock nut position. 0.5 module pinion gear gives efficient drive and great acceleration.   ★Left: Semi-double deck frame consists of main frame and sub-chassis: a race-proven setup that is both streamlined and highly rigid. ★Right: R/C equipment and battery positions secure a low center of gravity. The use of low-profile servos is recommended.   ★Left: This image gives a close-up look at the heart of this model's drivetrain: the TTC system with 0.5 module gear. ★Right: The FRP main chassis is a stylish shade of black. Different rear upright positions allow 3 differing centers of gravity.   Specifications ★Length: 379mm, Width: 245mm, Height: 150mm ★Wheelbase: 264mm　★Tread: 210mm (Front), 203mm (Rear) ★Tire Width/Diameter: 21/85mm (Front), 41/82mm (Rear) ★2.5mm FRP Semi-Double Deck Frame ★Rear-Wheel 2WD ★Planetary Gear Differential ★Tamiya Traction Control (TTC) system ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension with CVA Short Shock Units (Front) & CVA Long Shock Units (Rear) ★Gear Ratio = 8.49:1 (using kit-standard 0.5 module 25T pinion gear) ★Motor and Electronic Speed Controller (ESC) are sold separately.   Separately Required Items ★Motor ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery Pack & Charger Information is current as of January 7, 2019. Specifications are subject to change without notice.

Tamiya 47390 - 1/10 Avante (2011) Black Special Kit Identisk nyutgivelse av 84270 Avante 2011-settet, som er en nyutgivelse av den originale 58072 Avante Dette er en Limited-Edition Black Special-utgivelse, som opprinnelig ble utgitt for å minnes 35-årsjubileet for Tamiya R/C-bilprodukter. Den har et fargevalg inspirert av Mini 4WD-fetteren Avante Black Special. Nødvendig tilbehør: Radio/Motaker Regulator (HW1060-1080)  Servo Batteri/Lader Lexan Lakk Om Avante: Bilen har et unikt akseldrevet 4WD-system som ble hentet fra Tamiyas første 4WD R/C-buggy, Hotshot. Den har en svært sofistikert design, inkludert en FRP-dobbelt-dekks chassislayout, langsgående motor- og batteriposisjoner, og et formel-type karosseri med chassiskåpe. Den er utstyrt med innovative komponenter som en kompakt girkasse med 3 små planetgir, en senterdiff for å øke stabiliteten, en fullt justerbar fjæring. Den moderne spesifikasjonen til bilen har noen få oppdateringer, som universelle drivaksler og maskinerte aluminiums hjulnav, som gir denne versjonen økt holdbarhet og ytelse i forhold til originalen. • 1/10 skala R/C akseldrevet 4WD buggy byggesett. Lengde: 420mm, bredde: 240mm, høyde: 140mm. Akselavstand: 260 mm. • Karbonfiberdeler som 2 mm tykkelse øvre og nedre dekk, pluss bakre demperstag gir suveren styrke. • Inkluderer Avante (2011) Racing-styringssett, med en 2 mm tykk karbonfiberstyreplate og 850 kulelager som gir silkemyk bevegelse. • Inkluderer Avante (2011) Torque Splitter Set, med momentdeler og kuledifferensialer for sikker trekkraft. • 4-hjuls oppheng med dobble bærearmer har metallaksler for god tilpasningsevne. • Hjulnav foran i aluminium. • Knastedekk er montert på fluorescerende rosa felger. • Leveres med en 25-turn motor som leveres på en spesiell “label” • Krever: 2-kanals radio, servo, ESC (elektronisk hastighetskontroll) 7,2 volt batteripakke og lader, og Tamiya PS maling. Mini 4WD Special Enlarged This updated, re-released version of Tamiya's legendary 1988 Avante buggy features the cool color scheme of the Mini 4WD Avante Black Special. It comes equipped with hybrid spike tires mounted on vivid fluorescent pink lightweight wheels to add to its eye-catching appearance.   Select Options Included The shaft-driven 4WD chassis features carbon fiber upper/lower decks (2mm) and rear damper stay (3.5mm) which ensure superb strength. Front/rear ball differentials and center torque splitter help provide sure-footed traction. Racing steering set with 2mm thick carbon fiber plate offers linear steering response. 4-wheel double wishbone suspension with metal shafts and oil dampers allows a high degree of setting customization. Aluminum front knuckles feature the same shape as those on the original Avante and radius arm protector absorbs shocks to prevent damage to suspension arms. A total of 26 ball bearings contribute to the model's smooth power.   ★Left: 2mm carbon fiber double deck chassis secures excellent performance for this off-road racer. ★Right: Racing steering set features a 2mm thick carbon fiber plate as standard in this kit.   ★Left: 25T Type 540 motor features a dedicated sticker designed for the Avante (2011) Black Special. ★Right: Vibrant fluorescent pink molded wheels add a splash of color to the overall look.   Specifications ★Length: 420mm, Width: 240mm, Height: 140mm ★Wheelbase: 260mm ★Tread (F/R): 200mm ★Tire Width/Diameter: 32/88mm (Front), 40/88mm (Rear) ★2mm Carbon Fiber Double Deck Frame ★Longitudinally-Mounted Motor, Shaft-Driven Full-Time 4WD ★F/R Ball Differentials & Center Torque Splitter ★3-Piece Steering Tie-Rod with 2mm Carbon Fiber Steering Plate ★4-Wheel Double Wishbone Suspension ★Oil Dampers with Metal Cylinders ★Gear Ratio = 8.33:1 ★25T Motor included　★Requires an Electronic Speed Controller (sold separately)   Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery Pack & Charger Information is current as of January 8, 2019. Specifications are subject to change without notice.

Tamiya 47414 1/10 Audi A4 Quattro TT-01E 4WD Kit Byggesett av Audi A4 Quattro Touring, du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) Chassis er TT-01 Type-E, med motor og batteri festet i lav høyde. Dette for å oppnå et lavere tyngdepunkt, med en optimalisert balanse. * ved valg av lipo må overgang AM-8003 benyttes eller lodde om ESC til t-plug/Deans. Se anbefalt tilbehør under relaterte produkter.   Chassiset til den akseldrevne 4WD TT-01 Type-E har motor og batteri nær bakken for lavere tyngdepunkt og optimal balanse.Frontstendere (A-deler) er lagt til for å forbedre handlingen i chassiset. Disse stenderne er laget av et plastmateriale i polykarbonat, noe som reduserer slarkt, og gjør styring og håndtering skarpere og mer presis. Øvre dekk er også lagt til for å øke chassisets generelle stivhet; dette solide fundamentet gir bedre håndtering og gir et mer responsivt racingchassis. Det øvre dekket har også et transponderfeste for de som ønsker å kjøre race med bilen sin. Det øvre dekket har en motorbeskyttelse for å hindre å berøre en varm motor og muligens brenne en finger. Styresystemet har det raceprøvede TA05-styringssystemet. Dette racinginspirerte styresystemet bidrar til å gi mindre slark og mer presis styrerespons. Støtdempertårn foran og bak er støpt separat fra differensial husene. Denne forbedringen gjør vedlikeholdet mye enklere. Nå vil mekanikere ha direkte tilgang til differensialene foran og bak uten å fjerne støtdemperne. Dedicated TT-01 Type-E upright designs offer excellent reliability and fit that translates into a great, long-lasting drive. A three-piece steering tie rod setup employs aluminum pipes for superior parts fit and smooth steering motion. This image shows an example of how drivers in R/C races can use the included transponder stay when setting up their car. Damper stay and gear cover are separate parts; the stay features two different damper attachment holes to choose from.

Tamiya 47420 LAKKERT M-06 1/10 Volkswagen Type 2 (T1) Kit Her kommer Tamiya med ett perfekt lakkert karosseri i hvit med rød bunn på M-06 Chassiet så du trenger kun å montere og klistre så er du klar. Du trenger i tillegg for å få komplett bil, radio/motaker/servo, batteri og lader. A True Legend This R/C model assembly kit recreates the “23-window” type of the much-loved first generation (T1) Volkswagen Type 2, known as the Volkswagen Bus to many of its legions of fans, with an accurate polycarbonate body in detailed 1/10 scale. Combined with classic style wheels and tread patterned tires, it is mounted on the rear-wheel drive M-06 chassis. Great RR Performance from the M-06 The M-06 chassis features a rear-mounted motor, rear-drive setup and features a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses metal-plated wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. A large bumper is included. ★Intall separately sold LEDs in the front and rear lights for super realism! Turn signals are separate parts. ★Separate parts are also employed to depict the distinctive round side mirrors and their slimline stalks. ★The rear of the model also shows off excellent attention to detail, including a separate bumper part.   ★Dish wheels feature gleaming plated components. Paint the rim sections with TS-26 Pure white to finish. ★The rear-mounted motor, rear-wheel drive setup provides the model with excellent traction at the rear. ★Three different wheelbase lengths are accessible by switching the position of rear section parts.   Specifications ★Length: 426mm, Width: 195mm, Height: 177mm ★Wheelbase: 239mm ★Tread (F/R): 138mm ★Rear-Motor, Rear-Wheel Drive ★3-Bevel Differential Gear ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio = 5.8:1 ★Tire Width/Diameter (F/R): 25mm/59mm ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately)   Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is correct as of June 25, 2019. Specifications are subject to change without notice.

Tamiya 47429 1/10 Porsche 911 GT3 Cup 2008 TT-01E 4WD  Leveres med torque tuned motor. Byggesett av Porsche 911 GT3 Cup 2008 , du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Regulator vår anbefaling HW1060 Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) Enkel starterpakke med Radio/Motaker, Servo, 7.2V 2000mAh Nimh Batteri med enkel USB lader ( M-STYLE ) * ved valg av lipo må overgang AM-8003 benyttes eller lodde om ESC til t-plug/Deans. Se anbefalt tilbehør under relaterte produkter.   The bathtub frame of the newly evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance.Newly designed front uprights (A parts) have been added to improve the handling of the chassis. These new uprights are made from a polycarbonate plastic material, which reduces play, in turn, making steering and handling sharper and more precise.A new upper deck has also been added to increase the overall rigidity of the chassis; this solid foundation yields to better handling and provides a more responsive racing chassis. The upper deck also incorporates a new transponder mount for those that wish to race their car. The redesigned upper deck features a motor guard to prevent new hobbyist from touching a hot motor and possibly burning a finger.The steering system has been completely redesigned to feature the race proven TA05 steering system. This racing inspired steering system helps to provide less play and more precise steering response.New front and rear shock towers are now molded separately from the gear case covers. This improvement makes maintenance much simpler. Now mechanics will have direct access to the front and rear gear boxes without removing the shocks.

Tamiya 47443 1/10 1996 Porsche 911 GT1 Street TA03R-S 4WD Kit Byggesett av 996 Porsche 911 GT1 Street , du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Regulator Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) * ved valg av lipo må overgang AM-8003 benyttes eller lodde om ESC til t-plug/Deans. Se anbefalt tilbehør under relaterte produkter.   LAKK Length: 444mm. Image shows painted and assembled kit. Kulelager til bilen kommer i tillegg: 6x12x4mm   x 4 10x15x4mm x 4 5x11x4mm   x 8 5x8x2.5mm  x 4 3x7x3mm    x 2    90s Powerhouse Developed by Porsche for the 1996 endurance racing season, this car was based upon the 911 (993) with carbon fiber body panels and a midship mounted 600hp 3.2-liter flat-6 twin turbo engine. In addition to three works cars, a number were also said to have been developed for private customers and use upon public roads. This assembly kit creates an R/C model of such a "Street" car, with the sleek, powerful body captured in lightweight polycarbonate and separate parts for the side mirrors and rear wing. Stickers are included to recreate markings, headlights, taillights and more.   ★Left: The stretched form of the body with big rear fenders is accurately captured in lightweight polycarbonate. ★Right: Side mirrors on the front fenders are separate parts, with stickers recreating mirror surfaces.   ★Left: A big wing and rear spoiler really add to the racy look of the car. Both are captured using separate parts. ★Right: Mesh wheels are employed front and rear, with different offsets. Racing slicks have sponge tire inserts.   Efficient and Agile: the TA03R-S Efficient single belt-driven 4WD and quick steering response are the calling cards of the midship motor, short wheelbase TA03R-S chassis. Gearboxes front and rear house differentials for smooth cornering, and are sealed to protect the workings from dust and dirt, while high-performance double wishbone suspension employs oil dampers and utilizes dedicated touring car geometry (camber, caster, etc.), plus delta box lower arms for greater reliability.   ★Left: The 3-piece steering tie-rod uses a center input setup to help ensure a smooth, intuitive drive. ★Right: CVA Super Mini oil dampers are fitted front and rear on the double wishbone suspension.   ★Left: Here is the motor in its midship mount, the heart of the TA03R-S' efficient belt-driven 4WD. ★Right: The rear suspension setup uses reliable delta box lower arms, again with CVA oil dampers.   Specifications ★Length: 444mm, Width: 194mm, Height: 120mm ★Wheelbase: 237mm ★Tread: 157mm (Front), 165mm (Rear) ★Belt-Driven 4WD ★3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★CVA Oil Dampers ★Gear Ratio = 8.51:1 (kit-standard 14T pinion) ★Tire Width/Diameter: 25/59mm (Front & Rear) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of April 6, 2020. Specifications are subject to change without notice.

Tamiya 47452 1/10 Volkswagen Scirocco GT (Black Painted Body) (TT-01 Type-E) Kit Chassis er TT-01 Type-E, med motor og batteri festet i lav høyde. Dette for å oppnå et lavere tyngdepunkt, med en optimalisert balanse. Byggesett av Volkswagen Scirocco GT, du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri * ved valg av lipo må overgang AM-8003 benyttes eller lodde om ESC til t-plug/Deans. Se anbefalt tilbehør under relaterte produkter.   Length: 443mm. Image shows painted and assembled kit.   Sporty Scirocco The Scirocco name is a famous one, going back to the first generation 3-door hatchback released by Volkswagen in 1974. Its third generation hit the street in 2008, featuring a low-profile design with long roof that really caught the eye, and this R/C model assembly kit depicts a race-going version of that car. A durable and lightweight polycarbonate body captures the form in style, complete with renderings of lip spoiler, engine hood air outlets and more, while separately molded plastic parts for the rear wing and side mirrors add a further level of detail and realism. The body comes pre-painted in black, with tinted windows. Wheel arches are pre-cut, and body mount holes have been pre-made. Chassiset til den akseldrevne 4WD TT-01 Type-E har motor og batteri nær bakken for lavere tyngdepunkt og optimal balanse.Frontstendere (A-deler) er lagt til for å forbedre handlingen i chassiset. Disse stenderne er laget av et plastmateriale i polykarbonat, noe som reduserer slarkt, og gjør styring og håndtering skarpere og mer presis. Øvre dekk er også lagt til for å øke chassisets generelle stivhet; dette solide fundamentet gir bedre håndtering og gir et mer responsivt racingchassis. Det øvre dekket har også et transponderfeste for de som ønsker å kjøre race med bilen sin. Det øvre dekket har en motorbeskyttelse for å hindre å berøre en varm motor og muligens brenne en finger. Styresystemet har det raceprøvede TA05-styringssystemet. Dette racinginspirerte styresystemet bidrar til å gi mindre slark og mer presis styrerespons. Støtdempertårn foran og bak er støpt separat fra differensial husene. Denne forbedringen gjør vedlikeholdet mye enklere. Nå vil mekanikere ha direkte tilgang til differensialene foran og bak uten å fjerne støtdemperne. Dedicated TT-01 Type-E upright designs offer excellent reliability and fit that translates into a great, long-lasting drive. A three-piece steering tie rod setup employs aluminum pipes for superior parts fit and smooth steering motion. This image shows an example of how drivers in R/C races can use the included transponder stay when setting up their car. Damper stay and gear cover are separate parts; the stay features two different damper attachment holes to choose from.  

Tamiya 47470 1/10 Top Force EVO 2021 4WD Kit Top Force er tilbake, dette er RE-Release byggesett av 1992 modellen. Ferdiglakkert i svart/gunmetallic. Impressive Indeed! Dette byggesettet er en nyutgitt og oppdatert versjon av Top-Force EVO., En buggy som først ble utgitt i 1992. Karosseriet og bakvinge er støpt i polykarbonat/lexan ferdig malt i gunmetallfarge, akseldrevet 4WD-drivverk bruker tre differensialer og universelle drivaksler, og chassiset er basert rundt en stiv og lett karbonfiber dobbeltdekkramme med støtdempertårn og batteriplater laget i samme materiale. Modellen er ikke bare kompatibel med 7,2V Racing Pack-produkter, men også LF2200-6,6V Racing Pack. Nødvendig tilbehør: Radio/Motaker Servo Batteri/Lader Kulelager medfølger: Erstatnings kulelagre: 2stk 730 (3x7x3), 10stk 850 (5x8x2.5), 16stk 1150 (5x11x4) Race-Oriented Shaft-Driven 4WD Chassis This chassis features a race-oriented design with a lightweight carbon fiber double-deck layout that supports the gearboxes with 2mm thickness carbon fiber plates. A drivetrain with ball differentials front and rear and center one-way contributes towards sharp steering response, while front and rear assembly type universal shafts offer superior efficiency. Four-wheel independent double wishbone suspension employs oil dampers with aluminum cylinders, while turnbuckle upper arms allow camber adjustment. Vibrant orange wheels are paired with grippy spike tires.   ★This model features a highly refined polycarbonate body design that oozes speed; stickers are included in the kit to decorate it. ★A 4WD setup employs a steel propeller shaft to the right of the upper deck. Drivetrain and steering linkage feature efficient ball bearings. ★This image gives a close-up on the front double wishbone suspension, which also features turnbuckle shaft upper arms for easy adjustment.   ★Upper and lower decks, plus front and rear damper stays, and battery plates are crafted in lightweight, rigid carbon fiber material. ★This image of the double-wishbone rear suspension shows off the dampers with aluminum cylinders. Universal drive shafts are employed front and rear. ★Gear covers can be removed simply with the loosening of four screws, allowing easy access to the differentials for swift maintenance.   ★Alluring, vibrant orange color dish design wheels are paired with spike tires that ensure the Top-Force Evo. has plenty of grip. ★There is exemplary protection from dust, dirt and other potential infiltrators thanks to the kit's tough polycarbonate undercowl. ★An epic polycarbonate wing on the rear of the buggy features integrated end plates and a slatted design that really looks the part.   Specifications ★Length: 400mm, width: 250mm, height: 190mm ★Wheelbase: 270mm ★Tread: 217mm (front), 205mm (rear) ★Carbon fiber double deck frame ★Shaft-driven 4WD ★Front & rear ball differentials ★Center one-way ★3-Piece steering tie-rod (with ball bearings) ★4-Wheel independent double-wishbone suspension ★Tire Width/Diameter: 32/82mm (front), 41/82mm (rear) ★Aluminum cylinder oil dampers ★Gear Ratio = 8.59:1 ★Type 540 motor ★Full ball bearings ★Electronic Speed Controller (ESC) incl.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of May 28, 2021. Specifications are subject to change without notice  

Tamiya 47471 1/10 The Grasshopper II Black Edition Kit Grasshopper II kit fra Tamiya, med lakkert karosseri dette er relansert versjon fra 1988! Drev for bruk sammen med 540motor 18t 32P 0.8M Special Hopper! Dette byggesettet skaper en spesiell Black Edition av Grashopper II, en nippy og morsom 2WD radiostyrt bil. Den er basert på et tøft chassis med svingaksel foran og stive fjæringsoppsett bak med spiralfjærer for en morsom tur. Grå hjul gir en subtil fargevariasjon fra den svarte karosseriet, som er støpt i styrene og kan dekoreres med de medfølgende klistremerkene; de har oransje og gullmotiver som virkelig vil fange øyet. En sjåførfigur er også inkludert. Du trenger i tillegg. 1 x servo Radio/Motaker Batteri/Lader TS Klarlakk hvis man vil ha blank finish Se under relaterte produkter for anbefalt tilbehør: A Durable Off-Road Chassis A rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance.   ★Left: This image gives a closer look at the front swing axle suspension setup, which is coil sprung. The front bumper is molded plastic. ★Right: The rear gearbox is integrated with the axle case. Smooth, easy-to-handle power is provided courtesy of the Type 380 motor.   ★Left: Gray wheels are an excellent choice to partner the black body; they are paired with front grooved and rear spike pattern tires. ★Right: The model's battery pack is positioned longitudinally, and can be accessed efficiently from the underside of the chassis.   Specifications ●Length: 400mm, Width: 223mm, Height: 136mm. Weight: 760g (excluding R/C equipment) ●Wheelbase: 253mm ●Tread (Front & Rear): 186mm ●Tire Width/Diameter: 19mm/74mm (Front), 36mm/82mm (Rear) ●ABS Bathtub Type Frame ●Rear-Wheel Drive ●3-Bevel Differential ●2-Piece Steering Tie-Rod ●Suspension: Front Swing Axle, Rear Rolling Rigid ●Gear Ratio = 14.7:1 ●Type 380 Motor ● Electronic Speed Controller (TBLE-04 included)   Separately Required Items ●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger Information is current as of July 16, 2021. Specifications are subject to change without notice.  

Tamiya 47489 - Egress Black Edition 1/10 Kit Dette er en fargevariasjon av 1/10 Egress (2013) (Artikel 58583) – med nye klistremerker, dempere og uprights som passer til ett svart lakkert karrosseri (Karrosseri må lakkeres). Det svarte fargevalget forsterker det stilige bildet til Egress, og emballasjen med svart tema som 1/10 Avante (2011) Black Special (Artikel 47390) fanger øynene dine. Nødvendig tilbehør: Radio/Motaker Styreservo Motor Regulator/ESC Batteri og lader PS lakk Way Out Style! Dette byggesettet skaper en spesiell Black Edition av den legendariske Egress R/C buggyen, som opprinnelig tok verden med storm etter debuten i 1989, og fikk deretter en ytterligere oppdatering i 2013. Som navnet antyder, er fargevalget tydelig svartbasert, med dempere frontstående og byttet til mørke titananodiserte overflater, og hjulene med seks eiker støpt i sølv for å matche et karosseri som skal lakkeres svart. Akseldrevet 4WD-chassis med karbonkomponenter Dette akseldrevne 4WD-chassiset har en langsgående motor og fullt kulelagret, Mens karbonfiber øvre og nedre dekk sikrer at modellen har suveren stivhet. Kuledifferensialer foran og bak gir utmerket pålitelighet og enkelt vedlikehold, og fungerer sammen med det innebygde senteret enveis for å gi sikker bevegelse, og enveislageret kan låses om ønskelig. Universelle drivaksler har samme design som de som brukes i i TRF-serien, for å maksimere overføringseffektiviteten og minimere slitasje. 4-hjuls dobbel wishbone-fjæring støttes av fire oljedempere utstyrt med aluminiumsylindere, mens forsiden og baksiden av modellen er utstyrt med stabilisatorer. Aluminium foran stående gir utmerket pålitelighet, og kulelager i styrekoblingsarmer kombineres med 2 mm tykk karbonfiberplate for å tilby en lineær styrerespons. Egress takler også en snill børsteløs motorkombo. ★The three-piece steering tie-rod has a 2mm carbon fiber plate that helps to keep handling sharp and crisp. ★Dark titanium anodized uprights and oil damper parts are employed along with efficient universal shafts. ★Silver color 6-spoke wheels are paired with high-performance hybrid spike tires for a super drive.   ★Lightweight carbon fiber is employed for the 2mm-thickness decks in the rigid double-deck frame. ★The model uses a midship motor position with one-way bearing on the gear for linear handling feel. *Motor is sold separately. ★This image shows the rear suspension, which also uses efficient universal drive shafts.   ★Left: Take a closer look at the combination of high-capacity oil dampers and carbon fiber stay. ★Right: Mirrored stickers such as the rear wing slogan give the model that finishing touch.   Specifications ★Length: 430mm, width: 243mm, height: 157mm ★Wheelbase: 275mm ★Tire width/diameter: 32/88mm (front), 40/88mm (rear) ★2mm carbon fiber double deck frame ★Longitudinally-placed motor, shaft-driven 4WD ★Polycarbonate body and undertray ★Front & rear ball diffferentials, center one-way ★3-piece steering tie-rod ★4-wheel independent double-wishbone suspension ★High-capacity oil dampers with aluminum cylinders ★Gear ratio = 8.33:1 ★Type 540 motor and electronic speed controller (ESC) are sold separately.   Separately Required Items ★Type 540 motor ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of November 17, 2022. Specifications are subject to change without notice.

Tamiya 47502 -  Citroën DS Lakkert 1/10 (MB-01) Kit Flotte ting kommer i små pakker! Her kan du velge om du vil ha forhjulstrekk eller bakhjulstrekk! Dette byggesettet gjenskaper en R/C-modell av Citroën forhjulsdrevne sedanbil DS som ble hedret med tredjeplassen i 1999 Car of the Century-prisen. I 1955 ble Citroën DS annonsert i Paris, og den ble noen ganger kalt "romskipet" for sin aerodynamiske design. Denne modellen fanger kunstig den legendariske stilen med et lett polykarbonatkarosseri, basert på den kompakte 2WD-en til MB-01-chassiset. Forkrommede felger sammen med radialdekk. Nødvendig tilbehør:  Radio/Motaker Batteri/Lader Servo Regulator fra Hobbywing THW1060 er inkludert Ferdig lakkert TS lakk til hardplastdeler og eventuell X-XF maling for detaljer Det kompakte 2WD MB-01-chassiset gir et valg mellom tre typer akselavstand og for- eller bakhjulsdriftssystem. DS bruker en frontstillt motor med forhjulsdrift. Uten å fjerne batteripakken, motoren og elektronikk fra chassiset, kan du ganske enkelt endre drivretning til akslingene og styreoverføring for å bytte mellom for- og bakhjulsdrift, lav eller høy motorstilling kan velges for bakhjulsdrevne biler. Den 4-hjuls doble bærearmsfjæringen har symmetrisk struktur og friksjonsdempere. Samlede seksjoner som motorfeste, akslinger og fjæring forenkler montering og effektivt vedlikehold. Opprinnelsen til M-Chassis-serienes historie går tilbake til desember 1994, og denne serien har vært populær på grunn av kostnadseffektive sett med et bredt utvalg av karosserier, enkelt vedlikehold og passer godt alle nivåer av sjåfører. M-05 er etterfulgt nå av MB-01 Det nye MB-01-chassiset fortsetter den tradisjonen og tillater seks oppsett ved å velge fra tre typer akselavstand, og bak- eller bakhjulstrekksystem. Dette valget gjenskaper Citroën DS, som var en bil utviklet i 1955 i Frankrike. Options :  Kulelager :   2 x (1280) 8x12x3.5mm 12 x (1050) 5x10x4mm  (Gummiforseglet)   4 x (850) 5x8x2.5mm The MB-01 Chassis The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. A look from the back really shows off the elegant, sloping form of the car and its tail. A closer look at the wedge-shaped nose, which has a metal-plated bumper part. Roof rear lamps are another charming feature of the unique DS body. The rear bumper is also metal-plated, and stickers are used for combination lamps and the Citroën emblem. Plated dish wheels are paired with treaded 60D radial tires. The compact MB-01 chassis. For this model, it is assembled with a long wheelbase (239mm) and given wide front tread. A 3-piece steering tie-rod is combined with a front-left servo. Wide front tread is achieved with long wheel hubs and axles. The four-wheel double-wishbone suspension uses symmetrical arms. The motor sits in the front right, and provides power via a short propeller shaft. The motor mount is assembled as a unit, and secured to the chassis using two screws. The 4-bevel gear differential is the same as that on the TT-02; this chassis is compatible with TT-02 Hop-Up Option differentials. The flip-up battery holder gives quick access. With spacer attached to the sub deck, the wheelbase is set to Long (239mm). A close-up on the rear double wishbone suspension, which uses friction dampers. This versatile chassis can be assembled into three wheelbases and two drivetrain layouts.  

Tamiya 84416 1/10 Grasshopper Black Edition Kit Limited Black Edition kit fra Tamiya, du trenger i tillegg. Drev for bruk sammen med 540motor 18t 32P 0.8M Du trenger i tillegg. 1 x servo Radio/Motaker (Ferdig radiopakke med Servo, batteri og lader) Regulator (Vår anbefaling HW1060) (Er inkludert THW-1060 på kit 47522) Batteri/Lader Lakk av TS type hvis man vil lakkere TS Klarlakk hvis man vil ha blank finish Kulelager som option: 1150 x 9 stk 850 x 1 stk Hele settet 54997 Se under relaterte produkter for anbefalt tilbehør: This is a Limited Edition Grasshopper RC Kit. The original Grasshopper was released in 1984 which instantly became a hobby car kit hit throughout the 1980’s and 90’s. Even today it is one of Tamiya’s most successful kits thanks to its ease of assembly and fun driving capabilities.  Basert på enseters buggier som raste rundt på jordbaner over hele USA på 80-tallet. Grasshopper dukket opp i R/C-butikker i 1984. Siden den var lettvekts, lettkjørt og med enkel montering, så ble Grasshopper raskt en suksess som det perfekte nybegynnersettet innen radiostyrt bil. Den kunne også oppgraderes med en rekke tilleggsdeler, som oljedempere, 540 motor og kulelagre, noe som gjorde at bilen kunne utvikle seg i takt med førerens erfaring. Med alle de fantastiske egenskapene fra originalsettet er denne morsomme 2WD-buggyen en fryd å kjøre både på offroad- og asfaltbaner. Enten dette var din første – eller blir din første – vil Grasshopper garantert falle i smak. Den perfekte kombinasjonen av enkel montering og et robust ytre er det som gjorde Grasshopper så spesiell. Det slitesterke plastkarosseriet festes til et monocoque (bathtub style) chassis med skruer, noe som gir en solid ramme som tåler røff behandling. Offroad baner takles lett takket være friksjonsdempere, uavhengig svingaksel oppheng foran og stiv bakaksel bak. En lukket girkasse med differensial holder smuss og småstein ute, for jevn kjøring og stabile svinger. Paddle bakdekk og rillede frontdekk, kombinert med tredelte felger, gir utmerket grep på jordbaner. En figur av føreren setter prikken over i’en på denne morsomme offroad bilen. Spesifikasjoner Lengde / bredde / høyde: 389 × 223 × 135mm, vekt: 830g Motor: type 380 (chassis kompatibelt med 540 motor (benyttes sammen med pinion 3948X), selges separat) Drivverk: Bakhjulsdrift (2WD) Forhjulsoppheng: uavhengig svingaksel | Bakaksel: stiv aksel | Friksjonsdempere Forseglet bakgir for å beskytte differensialen under offroad-kjøring 3-delte hjul | Rette, rillede racing fordekk | Paddle dekk bak Front- og bakaksel kompatibel med kulelager (selges separat) Må kompletteres med: Radio og mottaker Servo NiMH eller LiPO batteri Batterilader

Tamiya 50395 - RD Front Upright Set (1 par) Ett par med svingarmsett foran som passer en rekke modeller fra Tamiya

Tamiya 50449 2.2" Front Tires Stadium Blitzer/Beetle (2) 6140-5645 2.2" (55x100x45mm)  Falcon, Dyna Storm, Blaster, Thunder Parts compatability according to Tamiya Guide Books and Tamiya Manuals. 58122 Blitzer Beetle Chassis:  Falcon Release date:  31 Aug 1993 58123 Dyna Blaster Chassis:  Dyna Storm Release date:  24 Aug 1993 58181 Stadium Thunder Chassis:  Falcon Release date:  27 Aug 1996 58252 Blitzer Beetle Chrome Metallic Special Chassis:  Falcon Release date:  11 Nov 1999 58482 Stadium Blitzer 2010 Chassis:  Falcon Release date:  12 Jan 2011 58502 Blitzer Beetle 2011 Chassis:  Falcon Release date:  14 Sep 2011 58524 Stadium Thunder Chassis:  Falcon Release date:  18 Apr 2012

Tamiya 50450 - Bakdekk 2.2" Stadium Blitzer Beetle (2) 2 løse dekk for Stadium Blitzer/Beetle Specs: Høyde : 95mm Bredde : 52mm Felg : 2.2"

Tamiya 50519 C.V.A Mini Shock Unit Set II 2 stk CVA dempere, option til flere modeller fra Tamiya , kan monteres i forskjellige lengder og med 2 forskjellige fjærer. Features: Steel piston shafts and springs, tough nylon bodies. Requires: Assembly and installation into a kit. Comments: The CVA refers to the materials these are constructed of--CVA is a     plastic shock as opposed to the large-bore aluminum shocks.     ALSO--the metal parts bag does include the o-rings and diaphragms,     the shock shafts Includes: Coil Springs (Soft) Damper Oil Coil Springs (Stiff) Metal Parts Bag X Parts Y Parts   Damper length: 55/64/67/70 mm (c/c max extended) Set content: 2 x dampers, double set of springs and oil. Damper type: Plastic C.V.A. (Constant Volume Adjustable) dampers with o-ring sealings. Note: Can be built to four different lengths  

Tamiya 50520 - C.V.A Short Shocks Unit Set II 2 stk CVA dempere, option til flere modeller fra Tamiya , kan monteres i forskjellige lengder og med 2 forskjellige fjærer. Includes: Y-parts (plastic parts for the shocks)     metal parts bag     four springs (2.5" or 63mm) long     A one-ounce bottle of shock oil (medium)     Instruction sheet Features: Steel piston shafts and springs, tough nylon bodies. Requires: Assembly and installation into a kit. Comments: The CVA refers to the materials these are constructed of--CVA is a     plastic shock as opposed to the large-bore aluminum shocks.     ALSO--the metal parts bag does include the o-rings and diaphragms,     the shock shafts Includes: Coil Springs (Soft) Damper Oil Coil Springs (Stiff) Metal Parts Bag X Parts Y Parts   Damper length: 94mm for cars (Madcap(rear),Manta Ray (rear),Bear Hawk (rear),Top-Force (rear),Bush Devil (front & rear),Standium Biltzer (rear),Super Blackfoot (front & rear),Terra Conqueror (rear),Biltzer Beetle (rear),Dyna Blaster (rear),Super Hornet (rear) Damper length: 87mm for cars (Manta Ray (front),Top-Force (front),Terra Conqueror (front), Dyna Blaster (front) Damper length: 87mm for cars (GrasshopperII (rear),Avante 2001(rear) Damper length: 80mm for cars (Monster Beetle (front & rear),Lunch Box (front & rear),Midnight Pumpkin (front & rear)  

Tamiya 50529 - Drevsats 4WD TA01-TA02-DF01 Plastdrevene som passer til TA01, TA02, TA02SW, TA02-S, DF01

Tamiya 50577 3x10mm Tapping Screw (10) 10 stk Flathode (jpn stjerne) 3x10mm Passer mange modeller.

Tamiya 50578 3x10mm Countersunk Tapping Screw (10) 10 stk senkehode (jpn stjerne) 3x10mm Passer mange modeller.

Tamiya 50579 Step Screw 3x10mm (5) (SP-579)

Tamiya 50582 - Tapping Step Screw 3x14mm 8449/62 (5)   SPECIFICATIONS Length of step: 6mm (0.24"), Diameter of step: 4mm (0.16")

Tamiya 50583 - 3x15mm Selvborende Skruer JiS (10) Grovgjenget skrue, mange av Tamiyakitene som bruker disse.

Tamiya 50590 - 4mm Ball Connector Ball-Link SP-590 (5) Kulelink for forskjellige Tamiya biler, for 4mm kule, 2mm Ø gjenger, 4mm lengde

Tamiya 50593 4x6x3mm Flanged Tube SP-593 (5)  Innvendig Ø : 3mm Utvendig Ø  : 4mm Lengde hylse opp til Flens : 5.87mm Total Lengde : 6.6mm Materiale : Messing

Tamiya 50598 C.V.A Mini Shock Unit V Parts (Damper Collar) Fjærskåler 12.3mm og rodend for støtdempere Tamiya, 50619,50520,50746 Passer en rekke av Tamiyabilene, sjekk manualen på ditt produkt.

Tamiya 50599 W-Parts for CC-01 Delepose W for CC-01 kit

Tamiya 50633 - 4mm Ball Connector/Adjuster SP-633 (6) Kulelink for forskjellige Tamiya biler, for 4mm kule

Tamiya 50705 Upright Parts/Knuckle Arm CC-01/TA02/03/FF01 Svingarmer for CC-01/TA02/03/FF01

Tamiya 50736 - TL-01 B-Parts Uprights GF-01-TL-01-WR02 Uprights for en rekke av Tamiya sine modeller: Sjekk Tamiyabase for kompabilitet: 50736 - Tamiya parts database - TamiyaBase.com Parts compatibility according to Tamiya Guide Books and Tamiya Manuals. 47305 Toyota Land Cruiser 40 Pick-up Chassis:  GF-01 Release date:  19 Sep 2015 47329 Metal Dump Truck Chassis:  GF-01 Release date:  08 Apr 2017 49337 Wild Willy 2 Metallic Special Chassis:  WR-02 Release date:  16 Dec 2003 57005 Calsonic Skyline GT-R Chassis:  TL-01 Release date:  11 Nov 1997 57007 Mitsubishi Lancer Evolution IV Monte-Carlo Chassis:  TL-01 Release date:  16 Jun 1998 57008 Subaru Impreza WRC Chassis:  TL-01 Release date:  17 Nov 1998 57009 Pennzoil Nismo GT-R Chassis:  TL-01 Release date:  17 Nov 1998 57010 Toyota Celica GT-Four 97 Monte-Carlo Chassis:  TL-01 Release date:  17 Nov 1998 57011 Peugeot 406 ST Chassis:  TL-01 Release date:  17 Nov 1998 57012 Castrol Mugen NSX Chassis:  TL-01 Release date:  09 Mar 1999

Tamiya 50738 - TL-01 G Parts (Gear) MF-01X Drevsats for TL-01 chassis, MF-01X

Tamiya 50746 - C.V.A. Super Mini Shock Unit Set 2 stk originale oljestøtdempere fra Tamiya som passer følgende chassis: BT-01 Chassis MB-01 Chassis TT-02 Type-SRX Chassis Kit M-07 Concept Chassis M-06 Chassis M-06 PRO Chassis M-05 Ver.II PRO Chassis M-05 Chassis M-05 PRO Chassis MF-01X Chassis TA05 ver.II Chassis TB-03 Chassis TT-02FT Chassis TT-02RR Chassis TT-02D Chassis TT-02 Type-SR Chassis TT-02 Type-S Chassis TT-02 Chassis TT-01D Type-E Chassis TT-01 Type-E Chassis

Tamiya 50794 - M03-04-05/FF02 G Parts Drevsats Drevsats for M-Chassis biler, 03-04-05 og FF02

Tamiya 50797 5mm Short Adjuster (8) Rod ends som passer en rekke rc biler fra Tamiya

Tamiya 50808 - TG10 Long Wheel Axle (2) Chassis G6-01 Chassis GF-01 Chassis GF-01CB Chassis WR-02CB Chassis GF-02 Chassis WR-02CB Chassis: Use with 54610. GF-01CB Chassis: Use with kit D4 or 54610. GF-02 Chassis: Use on rear.

Tamiya 50823 - TG10 Hjul akslinger (2) 2 stk hjulakslinger for bl.a TG10, TNS, TLT, TL-01, M-03, M-04, M-05, M-06, Big Wig, DF-01,DF-03, TT-01R, TT-02RR, TA-02, TA04, TB-01, TB-02, WR-01, FF02, WT-01, DT-02, FFX, Hot Shot, Boomerang, CR-01, Fox, CR-01, WR-02G, MF-01X, GF-01, TT-02B Chassis 

Tamiya 50882 Kingpin Set TA04/M-05 (4)

Tamiya 50883 - Drivakslinger 39mm (2) 1 sett dogbone for bl.a TB-01 39mm DRIVE SHAFT SET

Tamiya 51000 - Hi Torque Servo Saver Universal Black Forsterket servosaver som passer de fleste Tamiya kit, leveres med 23T (Acoms/Sanwa) og 25T Splines (Futaba/Tamiya)  

Tamiya 51001 - TT-01 Bathtub Chassis Chassisplate for Tamiya TT-01/E

Tamiya 51002 TT-01 A Parts (Upright) A parts for Tamiya TT-01 

Tamiya 51003 - TT01 Type E B-Parts – (Suspension Arms/Shocks) Parts compatability according to Tamiya Guide Books and Tamiya Manuals. This is the stock B Parts Tree for the Tamiya TT-01 Type- E Chassis Vehicles.                These parts are used for the Suspension Arms. 46601 Mazda RX-7 46602 Nissan Skyline GT-R 46603 Volkswagen Golf GTI 46604 Mitsubishi Lancer Evo.X 46605 Subaru Impreza WRC Monte-Carlo 07 46606 BMW 320Si WTCC 2006 Team Germany 46607 Schnitzer BMW M3 Sport Evo 46608 Lancia Delta HF Integrale 46609 Mercedes Benz 190E 47372 Subaru Impreza WRC Mexico 04 47379 ProMarkt-Zakspeed AMG Mercedes C-Class 47397 HKS Nissan Skyline GT-R Gr.A 47414 Audi A4 STW 47429 Porsche 911 GT3 Cup 2008 47430 Ford Mustang SVT Cobra R 47437 Mercedes-Benz CLK-GTR 1997 58402 Nissan Fairlady Z Ver Nismo 58407 Porsche 911 GT3 Cup VIP 07 58408 Suzuki SX4 WRC 58410 Volkswagen Golf GTI Cup Car 58411 Nissan GT-R 58413 Lamborghini Countach LP500S 58422 Porsche 911 GT3 CUP Team 58426 Subaru Impreza WRC 2008 58432 Aristo w/LED Lights 58433 Mercedes AMG DTM C Class 2008 58437 Mitsubishi Lancer Evo X 58439 Cusco Dunlop Subaru Impreza 58442 Hatsune Miku Stidie Glad BMW Z4 58449 BMW M3 GT2 2009 58450 TT-01R Type-E Chassis Kit 58451 BMW M3 E30 Sport Evo 58455 Nissan GT-R R35 Drift-Spec 58458 Lamborghini Gallardo LP560-4 Super Trofeo 58462 Datsun 240Z Rally 58473 Datsun 240Z Drift Spec 58474 Endless 370Z 58478 Nissan 370Z 58479 Raybrig HSV-010 58480 Honda Civic Type-R R3 JAS Motorsport 58481 Ford SVT F-150 Lightning 58487 Honda Weider HSV-010 58491 Mercedes Benz 190E 2.5-16 58494 Honda CR-Z 58501 Sumo Power GT Nissan GT-R 58504 Audi R8 LMS 24H Nurburgring 58508 Volkswagen Scirocco GT24 58510 Ferrari 599XX 58513 Celica LB Turbo Gr.5 58515 Toyota Celica GT-Four 1990 58516 BMW 318i STW 58529 Toyota 86 58533 Volkswagen Golf24 58538 Subaru Impreza WRX STI - Team Arai 58541 BMW M3 Sport Evo Jägermeister 58542 Mitsubishi Lancer Evo VII 58543 Subaru BRZ R&D Sport 58544 Nissan R390 GT1 58545 Subaru BRZ 58551 Scion FR-S (Toyota 86) 58554 Petronas SLS AMG GT3 58565 Subaru BRZ 58632 Team Hahn Racing MAN TGS 58638 Mercedes-Benz 190E 2.5-16 Evo. II Team Zakspeed Diebels Alt 58642 MAN TGS Team Reinert Racing 58656 Mercedes-Benz 190E 2.5-16 EVO.II Team Zakspeed debis 58661 Buggyra Fat Fox 58683 Tankpool24 Racing Mercedes-Benz Actros 84059 Porsche 911 GT3 Cup Car 2008 84062 Lamborghini Countach, white 84063 Lamborghini Countach, yellow 84235 Opel Calibra V6 DTM 92201 Castrol Celica '93 (Bunka OEM) 92204 Mitsubishi Lancer Evo IV (OEM)

Tamiya 51004 TT-01 G Parts Drevsats Drevsats for TT01, 1 stk Spurgear 61T og 2 stk kronhjul, diffhus og pinion for Differensial foran og bak

Tamiya 51005 - TT01 Type E P-parts – (Servo Saver) Parts compatability according to Tamiya Guide Books and Tamiya Manuals. This is the stock P Parts Tree for the Tamiya TT-01 Type- E Chassis Vehicles.                These parts are used for the Suspension Arms. 46601 Mazda RX-7 46602 Nissan Skyline GT-R 46603 Volkswagen Golf GTI 46604 Mitsubishi Lancer Evo.X 46605 Subaru Impreza WRC Monte-Carlo 07 46606 BMW 320Si WTCC 2006 Team Germany 46607 Schnitzer BMW M3 Sport Evo 46608 Lancia Delta HF Integrale 46609 Mercedes Benz 190E 47372 Subaru Impreza WRC Mexico 04 47379 ProMarkt-Zakspeed AMG Mercedes C-Class 47397 HKS Nissan Skyline GT-R Gr.A 47414 Audi A4 STW 47429 Porsche 911 GT3 Cup 2008 47430 Ford Mustang SVT Cobra R 47437 Mercedes-Benz CLK-GTR 1997 58402 Nissan Fairlady Z Ver Nismo 58407 Porsche 911 GT3 Cup VIP 07 58408 Suzuki SX4 WRC 58410 Volkswagen Golf GTI Cup Car 58411 Nissan GT-R 58413 Lamborghini Countach LP500S 58422 Porsche 911 GT3 CUP Team 58426 Subaru Impreza WRC 2008 58432 Aristo w/LED Lights 58433 Mercedes AMG DTM C Class 2008 58437 Mitsubishi Lancer Evo X 58439 Cusco Dunlop Subaru Impreza 58442 Hatsune Miku Stidie Glad BMW Z4 58449 BMW M3 GT2 2009 58450 TT-01R Type-E Chassis Kit 58451 BMW M3 E30 Sport Evo 58455 Nissan GT-R R35 Drift-Spec 58458 Lamborghini Gallardo LP560-4 Super Trofeo 58462 Datsun 240Z Rally 58473 Datsun 240Z Drift Spec 58474 Endless 370Z 58478 Nissan 370Z 58479 Raybrig HSV-010 58480 Honda Civic Type-R R3 JAS Motorsport 58481 Ford SVT F-150 Lightning 58487 Honda Weider HSV-010 58491 Mercedes Benz 190E 2.5-16 58494 Honda CR-Z 58501 Sumo Power GT Nissan GT-R 58504 Audi R8 LMS 24H Nurburgring 58508 Volkswagen Scirocco GT24 58510 Ferrari 599XX 58513 Celica LB Turbo Gr.5 58515 Toyota Celica GT-Four 1990 58516 BMW 318i STW 58529 Toyota 86 58533 Volkswagen Golf24 58538 Subaru Impreza WRX STI - Team Arai 58541 BMW M3 Sport Evo Jägermeister 58542 Mitsubishi Lancer Evo VII 58543 Subaru BRZ R&D Sport 58544 Nissan R390 GT1 58545 Subaru BRZ 58551 Scion FR-S (Toyota 86) 58554 Petronas SLS AMG GT3 58565 Subaru BRZ 58632 Team Hahn Racing MAN TGS 58638 Mercedes-Benz 190E 2.5-16 Evo. II Team Zakspeed Diebels Alt 58642 MAN TGS Team Reinert Racing 58656 Mercedes-Benz 190E 2.5-16 EVO.II Team Zakspeed debis 58661 Buggyra Fat Fox 58683 Tankpool24 Racing Mercedes-Benz Actros 84059 Porsche 911 GT3 Cup Car 2008 84062 Lamborghini Countach, white 84063 Lamborghini Countach, yellow 84235 Opel Calibra V6 DTM 92201 Castrol Celica '93 (Bunka OEM) 92204 Mitsubishi Lancer Evo IV (OEM)

Tamiya 51006 - TT-01 Drivakselsett Settet består av: 4 x Hjulakslinger (2 lange og 2 korte) 2 x Diff Outs 2 x DogBone  

Tamiya 51007 - Urethane Støtfanger M TT-01-TGS Beskyttelse for front, denne sitter std på TT-01-02 og kan også brukes på andre modeller. Den har samme hullbildet som TT-01-02 og kan tilpasses/skjæres til i ønsket størrelse.

Tamiya 51008 TT-01 Bevel Gear Set (TGS) (SP-1008) Differensial drev for bl.a TT-01 og TGS Chassis, passer også flere modeller, sjekk manualen for ditt produkt.

Tamiya 51048 - TB-02 DriveShaft 42mm (2) 2 stk DogBone style drivakslinger for TB-02, disse kan også brukes på andre biler. Total lengde : 47.9mm Kule             : 5.95mm Aksling         : 3,1mm CC mellom tverrpinner : 42mm Tverrpinne : 2mm

Tamiya 51205 - Astral Front 60/19 Felger 2WD Buggy (2) Spesifikasjoner: Høyde Total : 60.1mm Høyde Bead : 54.2mm Bredde Total : 24.1mm Bredde Bead : 19.4mm For bruk foran med kulelager/bøssing 5x11mm

Tamiya 51211 3x5mm Flat Screw (5) 5 stk Tynn flathode (jpn stjerne) 3x5mm Passer mange modeller.

Tamiya 51219 - 1/10 Driftedekk Type D på felg (2) Tamiya driftehjul for bruk på bl.a TT-01-02 Spesifikasjon: Høyde : 62.8mm Bredde : 26mm   These tires allow you to enjoy the experience of drift racing with your R/C car! A special design mixes a rubber base with a special resin compound, allowing realistic drift slide action while ensuring tires won’t damage normal R/C tracks. Tires let you attain drift with entry level motor specs as well as high-powered advanced level cars. Tires are pre-mounted to 10-spoke touring car wheels for easy use. Content Drift Tires pre-attached to 10-spoke Wheels x2 Usable with TT-01D

Tamiya 51248 - DF03 Spur Gear Set Drevsett med 2 stk Spurgear, 1 stk Balldiff gear, 1 stk mellomdrev til girkasse.

Tamiya 51283 - Reinforced 5mm Adjuster (8pcs.) ★These 5mm adjusters are molded in reinforced long plastic connectors in upper arms, steering linkage,etc *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 51318 - TT01 Type E A-parts – (Uprights) Parts compatability according to Tamiya Guide Books and Tamiya Manuals. This is the stock A Parts Tree for the Tamiya TT-01 Type- E Chassis Vehicles.                These parts are used for the Upright. 46601 Mazda RX-7 46602 Nissan Skyline GT-R 46603 Volkswagen Golf GTI 46604 Mitsubishi Lancer Evo.X 46605 Subaru Impreza WRC Monte-Carlo 07 46606 BMW 320Si WTCC 2006 Team Germany 46607 Schnitzer BMW M3 Sport Evo 46608 Lancia Delta HF Integrale 46609 Mercedes Benz 190E 47372 Subaru Impreza WRC Mexico 04 47379 ProMarkt-Zakspeed AMG Mercedes C-Class 47397 HKS Nissan Skyline GT-R Gr.A 47414 Audi A4 STW 47429 Porsche 911 GT3 Cup 2008 47430 Ford Mustang SVT Cobra R 47437 Mercedes-Benz CLK-GTR 1997 58402 Nissan Fairlady Z Ver Nismo 58407 Porsche 911 GT3 Cup VIP 07 58408 Suzuki SX4 WRC 58410 Volkswagen Golf GTI Cup Car 58411 Nissan GT-R 58413 Lamborghini Countach LP500S 58422 Porsche 911 GT3 CUP Team 58426 Subaru Impreza WRC 2008 58432 Aristo w/LED Lights 58433 Mercedes AMG DTM C Class 2008 58437 Mitsubishi Lancer Evo X 58439 Cusco Dunlop Subaru Impreza 58442 Hatsune Miku Stidie Glad BMW Z4 58449 BMW M3 GT2 2009 58450 TT-01R Type-E Chassis Kit 58451 BMW M3 E30 Sport Evo 58455 Nissan GT-R R35 Drift-Spec 58458 Lamborghini Gallardo LP560-4 Super Trofeo 58462 Datsun 240Z Rally 58473 Datsun 240Z Drift Spec 58474 Endless 370Z 58478 Nissan 370Z 58479 Raybrig HSV-010 58480 Honda Civic Type-R R3 JAS Motorsport 58481 Ford SVT F-150 Lightning 58487 Honda Weider HSV-010 58491 Mercedes Benz 190E 2.5-16 58494 Honda CR-Z 58501 Sumo Power GT Nissan GT-R 58504 Audi R8 LMS 24H Nurburgring 58508 Volkswagen Scirocco GT24 58510 Ferrari 599XX 58513 Celica LB Turbo Gr.5 58515 Toyota Celica GT-Four 1990 58516 BMW 318i STW 58529 Toyota 86 58533 Volkswagen Golf24 58538 Subaru Impreza WRX STI - Team Arai 58541 BMW M3 Sport Evo Jägermeister 58542 Mitsubishi Lancer Evo VII 58543 Subaru BRZ R&D Sport 58544 Nissan R390 GT1 58545 Subaru BRZ 58551 Scion FR-S (Toyota 86) 58554 Petronas SLS AMG GT3 58565 Subaru BRZ 58632 Team Hahn Racing MAN TGS 58638 Mercedes-Benz 190E 2.5-16 Evo. II Team Zakspeed Diebels Alt 58642 MAN TGS Team Reinert Racing 58656 Mercedes-Benz 190E 2.5-16 EVO.II Team Zakspeed debis 58661 Buggyra Fat Fox 58683 Tankpool24 Racing Mercedes-Benz Actros 84059 Porsche 911 GT3 Cup Car 2008 84062 Lamborghini Countach, white 84063 Lamborghini Countach, yellow 84235 Opel Calibra V6 DTM 92201 Castrol Celica '93 (Bunka OEM) 92204 Mitsubishi Lancer Evo IV (OEM)

Tamiya 51319 - TT01 Type E D-parts – (Upper Deck) Parts compatability according to Tamiya Guide Books and Tamiya Manuals. 46601 Mazda RX-7 46602 Nissan Skyline GT-R 46603 Volkswagen Golf GTI 46604 Mitsubishi Lancer Evo.X 46605 Subaru Impreza WRC Monte-Carlo 07 46606 BMW 320Si WTCC 2006 Team Germany 46607 Schnitzer BMW M3 Sport Evo 46608 Lancia Delta HF Integrale 46609 Mercedes Benz 190E 47372 Subaru Impreza WRC Mexico 04 47379 ProMarkt-Zakspeed AMG Mercedes C-Class 47397 HKS Nissan Skyline GT-R Gr.A 47414 Audi A4 STW 47429 Porsche 911 GT3 Cup 2008 47430 Ford Mustang SVT Cobra R 47437 Mercedes-Benz CLK-GTR 1997 58402 Nissan Fairlady Z Ver Nismo 58407 Porsche 911 GT3 Cup VIP 07 58408 Suzuki SX4 WRC 58410 Volkswagen Golf GTI Cup Car 58411 Nissan GT-R 58413 Lamborghini Countach LP500S 58422 Porsche 911 GT3 CUP Team 58426 Subaru Impreza WRC 2008 58432 Aristo w/LED Lights 58433 Mercedes AMG DTM C Class 2008 58437 Mitsubishi Lancer Evo X 58439 Cusco Dunlop Subaru Impreza 58442 Hatsune Miku Stidie Glad BMW Z4 58449 BMW M3 GT2 2009 58450 TT-01R Type-E Chassis Kit 58451 BMW M3 E30 Sport Evo 58455 Nissan GT-R R35 Drift-Spec 58458 Lamborghini Gallardo LP560-4 Super Trofeo 58462 Datsun 240Z Rally 58473 Datsun 240Z Drift Spec 58474 Endless 370Z 58478 Nissan 370Z 58479 Raybrig HSV-010 58480 Honda Civic Type-R R3 JAS Motorsport 58481 Ford SVT F-150 Lightning 58487 Honda Weider HSV-010 58491 Mercedes Benz 190E 2.5-16 58494 Honda CR-Z 58501 Sumo Power GT Nissan GT-R 58504 Audi R8 LMS 24H Nurburgring 58508 Volkswagen Scirocco GT24 58510 Ferrari 599XX 58513 Celica LB Turbo Gr.5 58515 Toyota Celica GT-Four 1990 58516 BMW 318i STW 58529 Toyota 86 58533 Volkswagen Golf24 58538 Subaru Impreza WRX STI - Team Arai 58541 BMW M3 Sport Evo Jägermeister 58542 Mitsubishi Lancer Evo VII 58543 Subaru BRZ R&D Sport 58544 Nissan R390 GT1 58545 Subaru BRZ 58551 Scion FR-S (Toyota 86) 58554 Petronas SLS AMG GT3 58565 Subaru BRZ 58632 Team Hahn Racing MAN TGS 58638 Mercedes-Benz 190E 2.5-16 Evo. II Team Zakspeed Diebels Alt 58642 MAN TGS Team Reinert Racing 58656 Mercedes-Benz 190E 2.5-16 EVO.II Team Zakspeed debis 58661 Buggyra Fat Fox 58683 Tankpool24 Racing Mercedes-Benz Actros 84059 Porsche 911 GT3 Cup Car 2008 84062 Lamborghini Countach, white 84063 Lamborghini Countach, yellow 84235 Opel Calibra V6 DTM 92201 Castrol Celica '93 (Bunka OEM) 92204 Mitsubishi Lancer Evo IV (OEM)

Tamiya 51358 1/10 Mercedes-Benz Unimog U406 Clear Body Set Body for wheelbase 242mm, passer CC-01/CR-01   This is the Tamiya 1/10 R/C M-B Mercedes Unimog body set for R/C Cars. This is the clear plastic piece that covers the vehicle's chassis and provides the "shape" of the vehicle.       FEATURES Compatible with all CR-01 chassis Highly detailed body and cutting lines Body has a plastic protective film on the outside that should be removed after painting     INCLUDES One Tamiya 1/10 Scale Mercedes M-B UNIMOG body and bub body One peel-off decal sheets with lights, all body trim and sponsor decals One window masking sheet Black parts tree for the mirrors Metal plated parts tree with front grille and light cases All mounting hardware and body hold down pins Instructions     REQUIREMENTS Polycarbonate paint for painting the inside of the body. The color choice is up to the modler Body scissors to cut out the body Hobby knife or scissors to cut out the decals     SPECIFICATIONS Body- Length: 15-1/4" (427mm) Width: 7" (190mm) at center Height: 6-1/4" (95mm) top of cab Height: 3-1/4" ( mm) top of bed WB : 242mm Sub Body- Length: 9-1/4" (184mm) Width: 5-1/8" (22mm) Height: 1" (22mm) at highest point

Tamiya 51364 - Subaru Impreza WRC 2008 1/10 Clear Body 1/10 ulakket Subaru Impreza karosseri for bl.a TT-01-TT02-TA05ver2 - TA05-Ifs-TB-03 iFS-DF03-TGS SPESIFIKASJONER: Lengde : 430mm Bredde : 190mm Høyde : 130mm Hjulbase : 257mm Leveres uklippet og ulakkert, med maskeringer, dekaler, Bakvinge(spoiler) speil og lyktebrønner.

Tamiya 51389 - M-05 Ver.1 A Parts (Chassis) Standard chassis til M-05  Compatible Chassis M-05, M-05 PRO, M-05 Ver.II PRO Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 51390 M-05 B Parts Steering Wiper B-parts for M-05 chassis

Tamiya 51391 C Parts Suspension Arm M-05

Tamiya 51392 D Parts Damper Stay M-05