RC-BILER OG DELER

Tamiya 54491 - 1/10 Scale R/C Rally Car Cockpit Set (Left-Hand Drive) Dette er en oppdatert versjon av artikkel nr 50463 (RC Rally Car Cockpit Set). Cockpiten sett kan monteres på Tamiya 1/10 rallybil body kits for å legge på et ekstra nivå av realisme. Takket være den inkluderte uretansvampen, gjør at denne cocpiten er kompatibel med et stort utvalg av chassisbredder. Du maler den selv til ønset decor og farge skjema med Tamiya maling. Settet inneholder: . Cockpit og hjelm x1 . Urethane svamp  x1 . nydesignede klistremerker . Deler til feste cockpit til modell. ★Add another layer of realism to your rally car model with this set of parts! ★It includes components to recreate a cockpit interior with driver and co-driver. ★Urethane sponge is included to fill any gaps between body and cockpit. ★Cockpit and helmet parts are styrene, and so can be painted using Tamiya Color plastic paints. ★Marking stickers are included. ★Width: 160mm. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.  

Tamiya 54496 - WR-02 Sjåfør Figur Full Body Dette er den populære førerfiguren fra Wild Willy 2 byggesettet. Den leveres komplett med hjelm og hele kroppsdeler for å fullføre én førerfigur. Lakk og lim kommer i tillegg. Spesifikasjoner : Høyde :  Plastic assembly kit figure. Item includes parts necessary for attachment. Compatible with WR-02 chassis or can be modified to fit your custom creation.

Tamiya 54500 - TT-02 High Speed Drevsats 68T- 0.6M Pitch 68T-tannhjulet i dette settet gir utveksling mellom 9,82 og 6,55 (kit-standard 70T - drev gir en utveksling på 11,38 til 7,28), Inkludert er også et drevfeste i aluminium, 7x5x11,4mm avstandsstykke og festeskruer. ★The 68T spur gear in this set allows gear ratios between 9.82 and 6.55 (kit-standard 70T gear allows 11.38 to 7.28) ★Also included are a spur gear mount, 7x5x11.4mm spacer and more. Compatible Chassis TT-02, TT-02D, TT-02 Type-S Chassis

Tamiya 54514 XV-01 Stabilizer Set (Front & Rear)

Tamiya 54539 - TT-02B Full Turnbuckle Set ★Turnbuckle shafts are a simple way of altering camber and toe angle settings. ★This set includes 7 turnbuckle shafts, enough to fully kit out the TT-02B chassis: front upper arms, rear upper arms, steering tie-rods and steering rod. ★Wrench for adjustment is also included. ★Contains three 3x23mm shafts, four 3x32mm shafts, and 5mm adjusters. Compatible Chassis TT-02B Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54561 - DT-03  Stabilizer Set (Front & Rear) Hop-Up Options no.1561 DT-03 Stabilizer Set (Front & Rear) Item No: 54561   ★Stabilizers help to combat chassis roll and give a more stable drive. ★This set includes front and rear soft (red) and hard (blue) stabilizers. ★Use them to get your DT-03 chassis car setup just as you like! Compatible Chassis DT-03 Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54579 Ball Bearing Set (1150) 5x11x4 (16) Kulelagersett med 16 stk 5x11x4mm Metallshield lager fra Tamiya Settet består av: 16 stk 5x11x4 metal shield bearings 1150 Ball bearings x 16pcs.   ★Ball bearings are a great place to start when tuning up your model, slashing power loss in the drivetrain and raising durability. ★This set contains sixteen 1150 ball bearings. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54598 Rock Block Tires CC01 Soft (2) Myke grovmønstret offroad dekk for 1.9" felgerOff-Road Truck Kit   This is a pair or Rock Block Tires for the Tamiya CC-01 Chassis Cars.       FEATURES Rubber construction, blocky off-road tread     INCLUDES Two Soft Compound Rock Block Tires     REQUIREMENTS Tire glue, HPI-101999 CC-01 compatible wheels     SPECIFICATIONS Width: 1.2" (32mm) Diameter: 3.6" (92mm)     COMMENTS Cannot be used with the Tamiya #49490 Mitsubishi Pajero Metaltop

Tamiya 54604 Body Mount Extension Set Karosseristolper som kan brukes på mange forskjellige biler. Dim: For 5.5mm stolper, forlenger med opp til 76mm. Leveres med 4 stk karrosseriklips.   This newly-designed body mount extension piece and snap pin set allows you to extend body mounts on your RC model car. They are intended to be used on those body posts which have been shortened for use with other bodies. They are compatible with a wide range of major Tamiya touring car and M-Chassis models. Contains 5.5mm Body Mount Extension x4, 6mm and 7mm Snap Pins x4 Usable with 5.5-6mm diameter body mounts. Compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts.

Tamiya 54605 - M-05 Ver.II A Parts (Chassis) Chassis til M-05 så man kan bruke batterier med 4 kantkasse.   ★These chassis parts shift the motor position further inside compared to the standard M-05 chassis, and are compatible with square-shaped battery packs and low-profile servos. ★Compatible with Item 54606 M-05 Ver.II One-Piece Lower Suspension Arm Set, to allow adjustment of rebound stroke. Compatible Chassis M-05, M-05 PRO, M-05 Ver.II PRO Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54608 - CVD Akslinger CC-01 (2) ★ Universelle aksler av CVD type for svært effektiv, ekte transmisjon. ★Minimal risiko for utilsiktet løsrivelse mens modellen er i gang. ★Sort finish gir superlativ realisme. ★Deler for å montere 2 aksler er inkludert.

Tamiya 54616 Metal Plated A Parts CC-01 Kromforniklet a parts for Tamiya CC-01, disse passer alle cc-01    These are the Metal Plated A Parts for the Tamiya CC-01 Chassis Vehicles.     FEATURES Molded plastic construction with polished metal plating Replaces stock black A parts   INCLUDES Four Metal Plated A Parts

Tamiya 54625 CC01 Chassis Lowering Kit This kit lowers the CC-01 chassis by 16mm, giving enhanced stability that optimizes the chassis for on-road use by lowering the center of gravity. At the same time, parts such as the plated dish wheels make your CC-01 car have a custom look. A 20T pinion gear is included to enable speedier running. 73mm diameter Low Profile Tires x4 Dish Wheels (Plated) x4 Inner Sponge for 4 tires 20T Pinion Gear x1 Damper Oil (#400, Yellow) Damper Springs (White)* x4 Flanged Spacers x4   ★This handy kit includes the parts needed to give the CC-01 a lowride suspension. ★It lowers the off-road CC-01 chassis by 16mm, giving enhanced stability that optimizes the chassis for on-road use. ★The lowered form of the CC-01 will be an eye-catching ride. ★The kit includes 73mm diameter low-profile tires with inner sponges, plus stylish chrome plated dish wheels and short white damper springs. *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Specifications are subject to change without notice.

Tamiya 54626 - Buggy Driver Figure Set Buggy driver som passer i en rekke av Tamiyabilene. Leveres umontert,umalt med skruer og skiver. ★This helmeted driver figure will add some drama and realism to your R/C model, particularly buggies! ★It requires assembly and can be painted as you like. ★Screws and washers for use in the attachment process are included.   https://www.tamiya.com/english/rc/matching/matching_list.pdf

Tamiya 54643 - Kulelagersett MetalShield for MF-01X Kulelagersett (24stk) 5x8x2.5mm 2stk 5x8x2.5mm(Flens) 2stk 5x11x4mm 20stk Disse passer flere modeller, sjekk manualen til din bil. ★A great first step in tuning up your car, ball bearings boost efficieny and durability. ★This set contains twenty 1150 ball bearings, two 850 ball bearings and two 850 flanged bearings.  

Tamiya 54757 - M-07-08 Consept Swaybar Stabilizer Set Foran-Bak ★Bruk disse stabilisatorene til å endre oppsettet for fjæring avhengig av baneoppsett, hastighet osv. ★Inkluderer 2 forskjellige stivheter foran og bak, og justeringsstenger for enkelt å endre V/R-balansen.

Tamiya 54834 Full Ball Bearing Set T3-01 Kulelagersett for T3-01 Chassis Settet består av: 4 stk 2.8x6.2x2.8mm 8 stk 6.0x10.3x3mm 2 stk 8.0x12x3.8mm 3-01 Full Ball Bearing Set Item No: 54834   ★Ball bearings give greater durability and minimal power loss, and are a great first step in tuning your model. ★Use to replace G1, G2, G3 parts of same size. Compatible Chassis T3-01 Chassis

Tamiya 54835 - T3-01 Aluminum Adjustable Link Arm 3x42mm Set Bruk disse tøffe aluminiumslinkene i stedet for standard A9-plastkomponenter, for forbedret sving og enkel justerbarhet. ★ Enkel justering gir problemfri tilpasning til en rekke servostørrelser. ★Inneholder to 3x42 mm aluminiumslinker, fire 5 mm justeringer, fire 5 mm kulekoblinger og mer.   ★Use these tough aluminum turnbuckle parts in place of kit standard A9 components, for improved turns and easy adjustability. ★Easy adjustment allows fuss-free adaptation to a range of servo sizes. ★Contains two 3x42mm aluminum turnbuckle shafts, four 5mm adjusters, four 5mm ball connectors, and more. Compatible Chassis T3-01 Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of September 7, 2018. Specifications are subject to change without notice.

Tamiya 54859 T3-01 FRP Support Arms ★Used in place of kit-standard A13 part, this lightweight and rigid 2mm FRP component further helps the model right itself. Compatible Chassis T3-01 Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of January 9, 2019. Specifications are subject to change without notice.

Tamiya 54865 - Ribbed Front Bubbles Tires (2) ★Disse dekkene er kompatible med WR-02CB chassismodeller. ★De er av en mykere gummiblanding enn standarddekk, for forbedret veigrep og grep på tøffe overflater. ★Diameter: 95mm, bredde: 45mm. ★For bruk sammen med WR-02CB T Parts (hjulfelger) og S Parts (eiker).

Tamiya 54866 - Round Block Rear Bubbles Tires (2) ★Disse dekkene er kompatible med WR-02CB chassismodeller. ★De er av en mykere gummiblanding enn standarddekk, for forbedret veigrep og grep på tøffe overflater. ★Diameter: 98mm, bredde: 55mm. ★For bruk sammen med WR-02CB T Parts (felger) og S Parts (eiker).

Tamiya 54897 Buggy Champ Ball Differential Set 2 Option ball diff for Champ(58441),Sand Scorcher (58452), Fighting Buggy (47304) ★This set includes ball differential parts for smooth cornering and a stable off-road ride. ★Can be adjusted while in the model. ★Includes an 1150 thrust ball bearing plus dedicated diff shaft and differential interior components. ★For use on the Buggy Champ, Sand Scorcher and Fighting Buggy models.     ★This image shows the final ball differential, once assembly is complete. ★Handily, the differential can be adjusted while it is installed in your car. ★Check how the setup is by rotating the wheel opposite the differential. Information is current as of March 4, 2020. Specifications are subject to change without notice.

Tamiya 54898 - SW-01 Upper Arm Connectors (OP-1898) ★These connectors link front and rear upper arms to help suppress roll and allow super-exciting steered wheelies. ★Crafted in 2.5mm thickness FRP plate. Compatible Chassis SW-01 Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of June 4, 2019. Specifications are subject to change without notice.

Tamiya 54900 - Kulelagersett SW-01  Settet består av, 4 x 1280 (8x12x3.5mm), 8 x 1060 (6x10x3mm), 8 x 630 (3x6x2.5mm) Målene er innvendig x utvendig x bredde   ★Ball bearings are a great first tuning step, for efficient power, longer drive times, and less wear and tear of moving parts. ★Contains four 1280, eight 1060 and eight 630 ball bearings. Compatible Chassis SW-01 Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of June 5, 2019. Specifications are subject to change without notice.

Tamiya 54910 - Kulelagersett CC-02 Settet består av, 2stk  5x8x2.5mm (850), 2stk  6x12x4mm (1260), 2stk x 10x15x4mm (1510), 16stk x 5x11x4mm (1150) Målene er innvendig x utvendig x bredde   ★Ball bearings are an excellent first step when tuning your model, reducing loss in the drivetrain and raising durability of rotating parts. ★Contains two each of 850, 1260 and 1510 size, plus sixteen 1150 size ball bearings. Compatible Chassis CC-02 Chassis *The official Tamiya R/C Parts Matching List has plenty of information regarding chassis compatible with Tamiya Spare and Hop-Up Option parts. Information is current as of Nov 6, 2019. Specifications are subject to change without notice.

Tamiya 54997 - Kulelagersett Hornet-Grasshopper-CW-01 Kulelagersett som består av : 9 x 1150 Lager (5x11x4mm) 1 x 850 Lager  (5x8x2.5mm) ★Kulelager er et flott første oppgradering, for minimalt kjøretap, lengre kjøretider og høy holdbarhet. ★Dette settet inneholder riktig mengde for å kulelagre blant andre Tamiya-legenden The Hornet og The Grasshopper 1 og 2, samt den legendariske Lunchbox og Midnight Pumpkin på CW-01 Chassis. ★Inneholder ett 850 og ni 1150 kulelager. ★Bildet til høyre viser kulelagrene og komponentene de erstatter. Kompatibelt CW-01-Chassis     *Den offisielle Tamiya R/C Parts Matching List har rikelig med informasjon om kabinetter som er kompatibelt med Tamiya reservedeler og Hop-Up Option-deler. Informasjonen er gjeldende per 2. mars 2021. Spesifikasjonene kan endres uten varsel.

Tamiya 1/8 R/C Dancing Rider T3-01 Chassis Kit Nødvendig tilbehør: Radio/Motaker Regulator Servo Batteri/Lader PS-Lakk   Lord of the Dance This R/C model assembly kit creates the Dancing Rider, a supremely fun 3-wheeled model that offers an exciting lean when cornering. An original body is included with the kit, and was designed under the supervision of famed Japanese artist Atsushi Arino. It is molded in lightweight polycarbonate, and comes with a molded driver figure for an extra touch of fun. T3-01 Chassis: Designed for Fun The T3-01 is a three-wheeled chassis comprised of two main sections (front and rear) connected by a center link; the front section houses R/C equipment and the power source, while the rear holds the integrated gearbox and motor. Positioned in the back of the front section, the servo applies motion to the rear section, which in turn makes the front lean. Support arms are moved by the servo, and help the model to self-right in the event that it turns onto its side. At the front, a telescopic fork has a built-in coil spring, while the rear features a cam-slide setup with cams on the rotating pitch axis: sliding left and right, they actuate the built-in coil spring to cushion the rear. A planetary differential gear is integrated into the rear axle. Specifications ★Length: 260mm ★Width: 135mm ★Height: 175mm ★Wheelbase: 196mm ★Tread (Rear): 91mm ★Tire Width/Diameter 21/61mm (Front), 25/59mm (Rear) ★Monocoque Chassis ★Rear-Wheel Drive ★Planetary Differential Gear ★Front Suspension: Telescopic Fork ★Rear Suspension: Cam-Slide ★Gear Ratio = 10.7:1 ★Requires an Electronic Speed Controller (sold separately) ★Type 370 Motor included Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Power source ★Stylish body design was overseen by Japanese artist Atsushi Arino, and is molded in lightweight polycarbonate. ★The body is inspired by delivery trikes commonly seen in Japan, and will be suited to a range of color schemes. ★T3-01 chassis is comprised of front (with R/C equipment and power source) and rear (motor, gearbox) sections. ★The trademark cornering lean is achieved by the servo acting on the rear section, in turn tilting the front. ★Internal spring in the front fork gives stability even at low speeds. A housing allows attachment of LEDs . ★A close-up on the telescopic front fork suspension, which gives a realistic ride. ★Cams on the rotating pitch axis slide left and right, cushioning the rear via the built-in coil spring. ★Support arms move in concert with the steering servo, and aid the model in righting itself. ★Side guards both protect the body during crashes and hold it in place with the chassis.

Tamiya 1/8 R/C Dual Rider T3-01 Chassis Kit Nødvendig tilbehør: Radio/Motaker Servo Regulator Batteri/Lader PS-Lakk   3-Wheeled Leaning Fun! This R/C model assembly kit creates the Dual Rider, a fun 3-wheeled model with a futuristic Takayuki Yamazaki-designed body featuring a prominent overarching canopy. It is molded in lightweight polycarbonate. The included driver figure offers numerous arm positions and headgear options, while separately sold LEDs can be used for the headlight.   ★A futuristic, sweeping canopy is one highlight of the polycarbonate body designed by Takayuki Yamazaki. ★A look at the rear end of the model showcases the unique "chopped-off" style employed on the Dual Rider. ★T3-01 chassis is comprised of front (with R/C equipment and power source) and rear (motor, gearbox) sections.   ★The headlight design features a digital motif that also provides the front with a futuristic air. ★Attaching light housing component to the front fork allows installation of separately sold LEDs. ★A close-up on the T-shirted driver figure, who was also designed by Takayuki Yamazaki.   ★Options abound, with a selection of helmet styles, eye stickers, instrumentation and more! ★An internal spring built in to the front fork gives the Dual Rider great stability, even at low speeds. ★A close-up on the telescopic front fork suspension, which gives the model a realistic ride.   ★Cornering lean is achieved by the servo acting on the cam slide suspension-fitted rear section. ★Support arms move in concert with the steering servo, and aid the model in righting itself. T3-01 Chassis: Designed for Fun The T3-01 is a three-wheeled chassis comprised of two main sections (front and rear) connected by a center link; the front section houses R/C equipment and the power source, while the rear holds the integrated gearbox and motor. Positioned in the back of the front section, the servo applies motion to the rear section, which in turn makes the front lean. Support arms are moved by the servo, and help the model to self-right in the event that it turns onto its side. At the front, a telescopic fork has a built-in coil spring, while the rear features a cam-slide setup with cams on the rotating pitch axis: sliding left and right, they actuate the built-in coil spring to cushion the rear. A planetary differential gear is integrated into the rear axle.   Specifications ★Length: 260mm ★Width: 135mm ★Height: 185mm ★Wheelbase: 196mm ★Tread (Rear): 91mm ★Tire Width/Diameter 21/61mm (Front), 25/59mm (Rear) ★Monocoque Chassis ★Rear-Wheel Drive ★Planetary Differential Gear ★Front Suspension: Telescopic Fork ★Rear Suspension: Cam-Slide ★Gear Ratio = 10.7:1 ★Requires an Electronic Speed Controller (sold separately) ★Type 370 Motor included   Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Power source Information is correct as of April 3, 2019. Specifications are subject to change without notice.

Tamiya 58242 Wild Willy 2 WR-02 Kit med ESC Du trenger i tillegg: Radio/Motaker, servo, standard stickpack/lipo round corner batteri, og lader til batteri, lakk for detaljer om man ønsker. Wild Willy 2 WR-02 Kit fra Tamiya, veldig detaljert og morsomt byggesett, støpt militær grønn farge, karosseriet sitter på WR-02 chassiet fra Tamiya og er en utrolig morsom bil. Settet leveres i ett kit for bygging og lakkering og gir mange timer med moro både i byggeprosess og i kjøreglede da den er ferdig. For å komplettere kitet må man ha 1 stk styreservo, radio og motaker, batteri 7.2V Nimh eller 7.4V Lipo(må være såkalt Round Corner pakke,runde kanter med *Tamiyakontakt, egnet lader for valgt batteri, verktøy for bygging og TS lakk for karosseriet.) Girkasse og motor er ferdig montert. (*Ved valg av batteri med annen kontakt enn Tamiya kan adapter1 eller  adapter2 brukes) Radio, Servo og Batteripakke MStyle Lakk/maling anbefalt av Tamiya: TS-28 X-2 X-7 X-11 X-14 X-18 XF-2 XF-7 XF-15 XF-16 XF-56 XF-57 The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar.   Specifications Chassis: WR-02 Scale: 1/10 Length: 12.80 inches (325mm) Width: 12.20 inches (380mm) Wheelbase: 6.77 inches (172mm) Front Tread: 7.87 inches (200mm) Rear Tread: 7.87 inches (200mm) Weight: 3.77 lbs. (1710g) Chassis: ABS Monocoque Suspension: 4 wheel independent Damper Type: Plastic coil over friction Drive Train: 2WD gearbox Gear Ratio: 18.3:1 Differential Type: Bevel Gear Motor Included: Electric type 540 Wheel/Tire Type: Chrome/V-Lug Pattern Body Included: Styrene (plastic) body is molded in a military green color Radio Type: 2-Channel Surface Radio (not included) Battery Type: 7.2V Battery (not included)

Tamiya 58336 1/10 Hornet Clear Lexan Body Re-Release Kit (Inkl ESC THW-1060)  Hornet med lexan karosseri, byggesett  fra Tamiya, du trenger i tillegg. 1 x servo Batteri/Lader PS- Lakk i ønsket farge (Box Art = PS-5) X-XF maling for figuren Verktøy for montering og saks for klipping av karosseri Kulelager som option: 1150 x 9 stk 850 x 1 stk Se under relaterte produkter for anbefalt tilbehør:  Den revolusjonerende 1984 2WD terrengbilen er tilbake og morsommere enn noen gang før! Hornet står som en av Tamiyas mest populære R/C-biler som noen gang er utgitt, og nå er den relansert!!! Denne fantastiske bilen har utmerket ytelse både på grus- og asfalt-baner, og kan ta alle typer terreng. Akkurat som originalen har denne gjenutgivelsen et chassis og drivverk som er enkelt å montere. Den består av en slitesterk, men lett ABS-harpiks-badekarramme, forseglet girkasse med diffgir, oljefylte bakdempere, kraftig RS 540-motor og høyytelses fjæringssystem. Hornet er perfekt for de som pleide å ha en, de som alltid har ønsket seg en, og for de som ønsker en revolusjonerende buggy som har fortjent sin plass i R/C-historien. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere (25T) NiMH eller LiPO batteri (round case) Batterilader som matcher batteriet. Maling som anbefales av Tamiya: X-2 White X-14 Sky Blue X-18 Semi Gloss Black XF-2 Flat White XF-15 Flat Flesh PS-5 Black   The Legend Lives On!   The revolutionary 1984 2WD off-road buggy is back and more fun than ever before! The Hornet stands as one of Tamiya's most popular R/C cars ever released, helping launch a 2WD R/C buggy boom worldwide. Featuring excellent performance on both dirt and on-road tracks, this awesome buggy can take on any type of terrain. Just like the original, this re-release features an easy to assemble chassis and drivetrain consisting of a durable but lightweight ABS resin bathtub frame, diff gear loaded sealed gearbox, oil filled rear dampers, powerful RS 540 motor and high performance suspension system. The Hornet is perfect for those that used to have one, those that have always wanted one, and for those that want a revolutionary buggy that has earned its place in R/C history.   Product Specifications (Specifications subject to change) Type Detail Scale 1/10 Construction type assembly kit Terrain use off-road Drive-train 2WD RWD Drive type gearbox Drive line solid axle Differential type gear Suspension independent front/solid axle rear Steering mechanism direct servo Shock damper friction damper Shock damper material plastic Tire type rubber Tire tread pin spike Body material Clear Polycarbonate Chassis material plastic Electronic Speed Control (ESC) included ESC model Not included LED Light buckets no LED lights no Motor 540-brushed type Bearings metal and plastic bushings Adjustable camber fixed Adjustable toe angles front only Adjustable ground clearance fixed Adjustable gear ratio fixed Adjustable wheelbase fixed Adjustable track width fixed Adjustable shock angle fixed Special feature 1 Overall length: 400mm Special feature 2 Overall width: 230mm Special feature 3 Overall height: 150mm Special feature 4 Weight: 874g Special feature 5 Solid bathtub frame with side bumpers Special feature 6 Independent swing axle front suspension with friction dampers Special feature 7 Sealed rear gearbox to protect diff gear during off-road running Special feature 8 Straight ribbed racing front tires Spiked buggy rear tires Special feature 9 shock absorbent polycarbonate body shell Special feature 10 Reinforced resin bumper Requires A 7.2 battery & charger Requires B 2-channel radio gear Requires C polycarbonate paint

Tamiya 58346 1/10 The Grasshopper Kit Grasshopper kit fra Tamiya, dette er relansert versjon fra midten av 80 tallet!  Drev for bruk sammen med 540motor 18t 32P 0.8M Du trenger i tillegg. 1 x servo Radio/Motaker (Ferdig radiopakke med Servo, batteri og lader) Regulator (Vår anbefaling HW1060) (Er inkludert på kit 58346, velges i varianter) Batteri/Lader Lakk av TS type hvis man vil lakkere TS Klarlakk hvis man vil ha blank finish Kulelager som option: 1150 x 9 stk 850 x 1 stk Se under relaterte produkter for anbefalt tilbehør: Let It All Begin With This One Buggy Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a whole range of option parts such as oil dampers, 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners driving experience. Packed with all the fantastic features of the original kit, this fun 2WD buggy is a blast on both off-road and on-road tracks. Whether it was your first or will be your first, the Grasshopper guarantees to please. The perfect combination of simple assembly and tough exterior is what made the Grasshopper so special. Durable plastic body is fastened to bathtub resin monocoque chassis by screws, creating a solid frame that can absorb any type of rough handling. Off-road tracks can be tackled with ease thanks to coil spring dampers, and independent swing axle front and rigid axle rear suspension. Diff loaded sealed gearbox keeps out the dirt and stones for smooth driving and cornering. Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip performance on dirt tracks. Half-body driver figure adds that finishing touch to a fun off-road R/C car. Basic Specifications ★Length: 389mm, width: 223mm, height: 135mm, weight: 830g ★380 type motor (chassis compatible with 540 type motor - sold separately) ★Transmission Type: Rear 2 Wheel Drive ★Independent swing axle front suspension, rolling rigid axle rear suspension, friction dampers ★Sealed rear gearbox to protect diff gear during off-road running ★3-piece assembly wheel, straight ribbed racing front tires, paddle rear tires ★Front and rear axle compatible with ball bearings (sold separately)

Tamiya 58347 1/12 Vanessas Lunch Box CW-01 Kit Byggesett av Tamiya Vannesas Lunch Box,  du trenger i tillegg for å få komplett bil, radio/motaker/servo/Regulator, batteri og lader, TS lakk. Vi kan anbefale denne regulatoren: HW1060 Skal bilen brukes anbefales det å kulelagre den: 1150 x 9 stk 850 x 1 This R/C assembly kit recreates a fun and boxy classic VAN with over-sized monster truck tires. It is one of Tamiya's classic creations from the 1980’s (First released in 1987). It has been a fan favorite for its original appearance as much as for its R/C performance. The boxy minivan body has been raised up over monster truck wheels to ensure that this R/C van will grab the attention wherever you choose to drive it.  2WD Chassis Mounted on Big 115mm Diameter Tires  The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swingarms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces. Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.  ●Length: 385mm, Width: 290mm, Height: 225mm ●Weight: 1,560g (not including R/C mechanism and battery) ●Wheelbase: 207mm ●Tread: 212mm (Front), 216mm (Rear) ●F/R Tire Width/Diameter: 71/115mm ●ABS Box Type Frame ●Rear-wheel 2WD ●Suspension: Independent Swingarm (Front), Rolling Rigid (Rear) ●F/R Friction Dampers ●3-Bevel Differentials ●Gear Ratio: 14.7:1 ●Type 540 Motor ●Electronic Speed Controller (Not Included)   

Tamiya 58354 - The Frog 2WD Buggy Kit inkludert Regulator Nødvendig tilbehør: Radio/Motaker/Servo Batteri/Lader PS Lakk til karosseri Akrylmaling til sjåfør og detaljer (X/XF) Reintroducing the original 2WD buggy masterpiece featuring ABS resin space frame, horizontally mounted oil dampers, inboard spring type front suspension. Powered by a Type 540 motor. Kit includes straight ribbed racing front tires and high-grip rear spiked tires. Wheels are realistic 3-piece type. Includes diff gear. Ready to assemble R/C model kit. Re-issued and revised model of the frog,which made its debut in 1983. Lightweight and durable abs space frame. Four wheel independent suspension. Differential gear for smooth cornering. Oil dampers effertively absorb shock from rough terrain. Rear high grip rubber spike tires. Front grooved tires. Lightweight and durable polycarbonate body. Includes THW-1060-RTR ESC Requires A7.2V running battery(not included). Tamiya expec 2CH. radio control system recommended. Paint not included.   ELECTRIC KITS REQUIRE: Radio: 2-Channel with servo(s) Battery: 6-cell flat with standard Tamiya connector Charger: AC/DC timed or peak for 6-cell battery Paint: Polycarbonate for spare body Misc. Items: Building and track equipment Return of the Frog! First introduced in 1983, the 2WD racing buggy Frog made a huge splash with its eye-catching design and high performance running. The Frog now makes a comeback, updated for a new age, but with its basic structure essentially unchanged. Preserving its characteristic space frame, the oil dampers for trailing-arm type rear suspension have been updated to diaphragm type. Rear drive shaft features dogbone type joint for secure power transmission. Sleek polycarbonate body remains the same, while 3-piece wheels feature front grooved and rear spike tires for excellent off-road running. 2WD Chassis Packed with Innovation Electric R/C racing buggy features ABS space frame and nylon suspension and bumper for a lightweight yet rugged form that is perfect for off road running. Battery is held in ultra-low position, giving this car the stability and weight balance to handle rough terrain and wild jumps. Advanced 4-wheel independent suspension composed of front double wishbone type featuring in-board spring and durable steel radius arm. Rear trailing arm type features horizontally mounted aluminum cylinder oil dampers for effective shock absorbtion. Sealed differential gearbox ensures high speed cornering, while full ball bearings and 3-step gear ratio secures maximum transmission efficiency. Specifications ★Overall length: 410mm, Width: 240mm, Height: 145mm, Wheelbase: 1,020mm ★Transmission type: rear 2WD ★Suspension: Front double wishbone. Rear trailing arm ★Tire width/diameter: Front 21/73mm. Rear 51/88mm ★RS-540 Type motor included

Tamiya 58374 - 1/10 Sand Viper DT-02 Kit Sand Viper kommer på DT-02 chassis som har sin batteripakke som legges på midten av “badekar” rammen og har utmerkede kjøreegenskaper selv på ujevnt underlag. Karosseri i polykarbonat (Lexan) 1 x servo Radio/Motaker Batteri/Lader Regulator (Inkludert THW-1060) Leveres med fullt sett kulelager. Ha det gøy med 2WD terrengkjøring 2WD R/C buggy med lavt tyngdepunkt, CVA oljedempere, 4-hjuls fjæring med doble bærearmer og 14 kulelagre. En spennende høyytelsespakke. Karosseriet er laget av slitesterk, lett polykarbonat. De gråfargede felgene står fint i stil til det gule fargeskjemaet. Dekkombinasjonen sikrer utmerket trekkraft på alle underlag. DT-02 chassiet har optimal balanse og drivverk med konsekvent og effektiv kraftoverføring. 540 motor medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere NiMH eller LiPO batteri Batterilader PS maling Enjoy Fun 2WD Off-Road Action This all-terrain 2WD buggy R/C assembly kit features a low center of gravity bathtub frame, oil damper-equipped 4-wheel double wishbone suspension, and full ball bearings for an exciting high-performance package. The edgy, stylish body is made from durable, lightweight polycarbonate and its yellow paint scheme provides a great match for the gray-colored dish wheels. Grooved front tires and rear spike tires ensure excellent traction on any surface. High-Performance 2WD DT-02 Chassis With a longitudinally-mounted battery and centrally-positioned R/C mechanisms, the DT-02 bathtub frame chassis offers optimum balance. 4-wheel independent double wishbone suspension features long suspension arms, CVA oil dampers, and adjustable upper arms that effectively absorb bumps and shocks and provide a variety of suspension customization possibilities. To prevent dirt and debris from interferring with operations, the diff gear-equipped gearbox is fully enclosed. A total of 14 ball bearings and metal parts of drive shaft and joint cup provides consistent and efficient power transmission. Specifications ●Length: 384mm, Width: 248mm, Height: 140mm ●Wheelbase: 260mm ●Lowest Ground Clearance: 26mm ●Weight: 1,042g ●Motor: Type 540 ●Drivetrain: Rear Wheel Drive ●Tread: (Front & Rear) 216mm/208mm ●Diff. Gear: 3-bevel diff. ●Steering Tie Rod: 2-piece ●Suspension: 4-wheel Double Wishbone ●Gear Ratio: 9.28:1

TTamiya 58391 Hot Shot 2007 Kit  Hot Shot 2007 fra Tamiya, kit  rerelease 1985. Leveres med regulator og motor. Nødvendig tilbehør: Radio/Motaker  Servo Batteri og Lader Ønsket lexanlakk PS Om bilen skal brukes anbefales kulelagersett 54002 (eventuellt løse lager 13 stk 1150 5x11x4 (Pakke med 16stk 54579 ) + 5stk 850 5x8x2.5 Se under relaterte produkter for anbefalt tilbehør: 【En R/C-legende vender tilbake 】 Med sin aggressive karosseridesign og lave tyngdepunkt laget Tamiya Hotshot,  deres første akseldrevne 4WD R/C-buggy, da den ble introdusert i 1985. Det unike 3-delte chassiset inkluderer innovative funksjoner som mono-sjokk oljedempere foran/bak, 4-hjuls dobbel bærearmsfjæring utstyrt med stabilisatorer, og helt lukkede girkasser foran/bak utstyrt med trykkkulelager og differensialgir. Et bredt utvalg av tilleggsdeler ble produsert spesielt for å modifisere Hotshot, og maskinen ble noe som enhver ungdom på den tiden drømte om. Fansen har ropt etter en gjenutgivelse av den epokegjørende R/C-bilen, og Tamiya tar nå tilbake denne legenden for å la fansen gjenoppleve barndomsminnene sine.   【En gammel hund med nye triks】 Tamiya-designere har gitt Hotshot en makeover, erstattet eldre deler som er vanskeligere å sette sammen med moderne ekvivalenter, men fortsatt tro mot ånden til den originale Hotshot. Mens de doble bærearmsopphengene foran/bak og justerbare mono-sjokk oljedempere forblir de samme, har drivverket moderne drivaksler av hundeben for økt pålitelighet. Oljepakningene i støtdemperne er også skiftet til den mer moderne membrantypen. Dessuten, med bruk av en moderne ESC, var den originale Hotshots bakre aluminiumskjøleribbe ikke lenger nødvendig. Hotshot ville imidlertid ikke se lik ut uten den, så løsningen vår var å installere en dummy-del for å forbli tro mot det originale utseendet. Ta denne oppdaterte Hotshot-en ut på en tur og sammenlign den med dagens R/C-buggies for å oppleve hvor langt denne hobbyen har utviklet seg! New, more efficient dog bone type front/rear drive shafts and propeller shaft.    Progressive type rear suspension features pushrod and connecting plate.    You can see the dummy aluminum heat sink clearly in this rear view.    Front/rear mono-shocks feature diaphragm type oil dampers and feature adjustable springs.    Kit includes metal maintenance stand bars, which can be used together with the battery holder to lift the car.   【 Specifications 】　●Length: 390mm　●Width: 235mm　●Height: 150mm　●Weight: 1270g　●Tread: (Front/Rear) 194mm　●Tire Width/Diameter: (Front) 28/82mm, (Rear) 34/82mm　●Frame: ABS Resin Monocoque　●Drivetrain: Shaft-driven 4WD　●Diff. Gear: 3-bevel　●Steering: 2-piece Tie Rod　●Suspension: 4-wheel Double Wishbone　● Gear Ratio: 8.1：1, 10.04：1　●Motor: Type RS540　 【 Separately Required Items 】　●2-Channel FET-equipped R/C System ●7.2V running battery & charger●Speed Controller: ESC               

Tamiya 58418 - The Boomerang (2008) Kit Gjenopplev barndommen din med denne favoritten! Det elektriske Boomerang 2008 4WD-kitet i størrelse 1/10 gjenskaper den elskede buggyen fra 1980-tallet og finjusterer den med dagens mest ettertraktede funksjoner! Den tilbyr ikke bare forbedret styring og støtdempere, men den har også en mer effektiv girkasse, drivaksler og akselledd enn originalen. Et chassisdeksel forhindrer at smuss og rusk forstyrrer moroa. Monter din favoritt 2-kanals radio, 6-cellers NiMH-batteri og lader, så er du klar! Nødvendig tilbehør: 1 x servo  Regulator (ESC)(vår anbefalig **HW1060) Radio/Motaker Batteri/Lader (Ved valg av batteri med annen kontakt enn Tamiya kan adapter1 eller  adapter2 brukes) Ønsket lakk PS til karosseri   INKLUDERER 1/10 skala Tamiya Boomerang Buggy-byggesett med karosseri, 540-motor, bruksanvisning, klistremerkeark.  Badekarchassis i ABS-harpiks. Firehjulsdrevet buggy. Motor i størrelse 540. Karosseri i klart polykarbonat (lexan). Tre oljestøtdempere i plast. Styre bellkrank med servosaver. Lukket girkasse. Bladlignende støtfanger foran med klistremerkeark. 88,5 mm ytre diameter, 50 mm indre diameter og 25,4 mm brede semipneumatiske Super Gripper-dekk foran; 90 mm ytre diameter, 50 mm indre diameter og 37 mm brede semipneumatiske Super Gripper-dekk bak. Hvite 5-hulls felger i nylonharpiks. Fast camber. Justerbar toe-in via styrestag, camber refererer til vinkelen på toppen av dekkene fra vertikalt sett forfra eller bakfra på bilen.  Styring Styrestag: Justerbare, caster/toe-in refererer til vinkelen på forhjulsopphenget sett fra siden av bilen i forhold til chassiset.   SPESIFIKASJONER CHASSIS Lengde: 245 mm Bredde: 93 mm Høyde: 76 mm KAROSSERI Lengde: 10" Bredde: 5,25" Høyde: 2,75" 70 mm

Tamiya 58452 Sand Scorcher Off-Road Racer 2010 Kit Sand Scorcher fra Tamiya, kit med mye metalldeler og med kulelager og ny THW-1060 regulator med Tamiyakontakt inkludert. Nødvendig tilbehør: 1 x servo Radio/Motaker Batteri/Lader (Batteri må være av kort type, slik som Shortypack eller lignende, dette er laget for å passe perfekt i holderen 5-1 Nimh) Ønsket plastlakk TS Se under relaterte produkter for anbefalt tilbehør:   Sand Scorcher ble opprinnelig utgitt i 1979, og ble godt mottatt av fans over hele verden med sin humoristiske form og suverene mekanisme. Denne re-utgivelsen av Sand Scorcher, som holder seg til den grunnleggende utformingen av originalen mens den inneholder mange videreutviklede deler, vil minne deg om originalen. Denne modellen gjengir realistisk den unike formen til bilen som ble sett på one-make-løpet på “Baja 1000” i California, USA. Karosseriet er støpt i hvit polystyren og kan males med Tamiya plastmodellmaling. Det bakhjulsdrevne 2WD-chassiset har realistisk og aggressiv ytelse som uten tvil vil begeistre deg. Tamiya is celebrating the 30th anniversary of the Sand Scorcher with an improved re-release of the model. The new improvements include more fine tuned parts. Just as the original, the updated Sand Scorcher features ribbed front tires and paddle rear tires. Since the Sand Scorcher and the Buggy Champ use the same chassis, the spare parts are interchangeable .   Type Detail Scale 1/10 Construction type assembly kit Terrain use off-road Drive-train 2WD RWD Drive type gearbox Drive line universal Differential type Live axle Suspension independent suspension Steering mechanism bell-crank Shock damper oil-filled damper Shock damper material aluminum Tire type rubber Tire tread radial Body material ABS Plastic Chassis material aluminum Electronic Speed Control (ESC) included ESC model THW-1060 0LED Light buckets no LED lights no Motor 540-brushed type Bearings shielded ball bearing Adjustable camber fixed Adjustable toe angles front only Adjustable ground clearance fixed Adjustable gear ratio yes Adjustable wheelbase fixed Adjustable track width fixed Adjustable shock angle fixed Special feature 1 1/10 scale R/C assembly kit of the Sand Scorcher Special feature 2 Officially Licensed Special feature 3 Comes equipped with full ball bearings to reduce friction loss Special feature 4 Type 540 motor included Special feature 5 A duraluminum plate reinforced 2mm thick FRP main frame for added strength Special feature 6 Newly designed die-cast front and rear suspension arms, front axle, and wheel hubs Special feature 7 Transparent case protects the R/C mechanisms Special feature 8 Reinforced front uprights Special feature 9 Redesigned oil dampers Special feature 10 Detailed hard plastic body included Requires A 7.2 battery & charger Requires B 2-channel radio gear Requires C TS plastic model paint

Tamiya 58470 - 1/10 Holiday Buggy DT-02 Kit Holiday Buggy kommer nå på DT-02 chassis som har sin batteripakken legges på midten av “badekar” rammen og har utmerkede kjøreegenskaper selv på ujevnt underlag. Karosseri i støpt blå PE plast. Nødvendig tilbehør: 1 x servo Radio/Motaker Regulator (THW-1060-RTR) leveres på versjon 1 (Vår anbefaling til versjon 2  HW1060)  Batteri/Lader Plastlakk (TS-23) til taket om man vil ha dette i en annen farge enn støpt hvit Maling/Lakk til detaljer (Box art anbefaling XF-1 Sort Matt (TS-6), XF-2 Hvit Matt, XF-3 Gul Matt, XF-15, XF-62) For fullt kulelagring trenger du 14 stk 1150 lager (5x11x4mm) Eller en pakke fra Tamiya (54579) Se under relaterte produkter for anbefalt tilbehør: Length: 390mm. Image shows finished model.   Relive The Fun! The 2WD R/C off-road car Holiday Buggy made its debut in 1980 and attracted many R/C fans due to its sprightly handling characteristics. Now, Tamiya is proud to release the updated Holiday Buggy (2010), which comes mounted on the proven DT-02 chassis. It features a 4-wheel double wishbone suspension, and its simple, durable construction makes for easy assembly. The durable soft resin body features a pre-painted driver figure wearing a cowboy hat for enhanced realism. Fun-to-Drive DT-02 Chassis The bathtub type frame chassis features a longitudinal battery layout for lower center of gravity and optimum weight distribution. 4-wheel double wishbone suspension is equipped with coil spring damped units to provide superb off-road traction. A sealed gearbox protects against sand and debris and is equipped with differential gears to efficiently transmit the power from the type 380 motor. By installing separately available Type 540 motor and corresponding pinion gear, more powerful driving can be enjoyed. Specifications ●Length: 390mm, Width: 240mm, Height: 164mm ●Wheelbase: 260mm ●Ground Clearance: 26mm ●Weight: 1,250g ●Type 380 Motor Included ●Rear Wheel Drive 2WD ●Tire Width/Diameter: F=22/81mm, R=39/86mm　●Tread: F/R=217mm/208mm ●3-Bevel Differential Gear ●2-Piece Steering Tie-Rod ●F/R Double Wishbone Suspension ●Gear Ratio=15.77:1

Tamiya 58502 Blitzer Beetle 2011 Kit med THW1060 regulator Blitzer Beetle fra Tamiya, kit med lakkert hardplastkarosseri i sort. Nødvendig tilbehør: 1 x servo Batteri/Lader  Ønsket klarlakk for glans TS Enkel starterpakke med Radio/Motaker, Servo, 7.2V 2000mAh Nimh Batteri med enkel USB lader ( M-STYLE ) Anbefalt 12 stk 5x11x4 kulelager   Se under relaterte produkter for anbefalt tilbehør: This is a re-release version of the Blitzer Beetle R/C assembly kit, which was inspired by the exciting off-road desert racer designs seen in the United States.    Type Detail Scale 1/10 Construction type assembly kit Terrain use off-road Drive-train 2WD Drive type gearbox Drive line dog bone Differential type gear Suspension fully independent double wishbone Steering mechanism direct servo Shock damper oil-filled damper Shock damper material plastic Tire type rubber Tire tread pin spike Body material ABS Plastic Chassis material plastic Electronic Speed Control (ESC) included ESC model n/a LED Light buckets no LED lights no Motor 540-brushed type Bearings plastic bushing Adjustable camber yes Adjustable toe angles front only Adjustable ground clearance yes Adjustable gear ratio fixed Adjustable wheelbase fixed Adjustable track width fixed Adjustable shock angle fixed Special feature 1 1/10 scale R/C assembly kit Special feature 2   Special feature 3 The durable resin body is molded in white and comes with side mirror parts. The body may be painted with Tamiya's TS spray paints, which are formulated in synthetic lacquer for the best finish and durability Special feature 4 The tough, lightweight ABS bathtub chassis features a rear-mounted motor, rear-wheel drive layout Special feature 5 4-wheel independent double wishbone suspension is equipped with C.V.A. oil filled shock units and extremely durable monocoque-type lower arms Special feature 6 The front spiked tires feature three ribs for enhanced stability while the rear tires feature both spikes and an X-shaped tread pattern along the center to ensure high levels of grip Special feature 7 Fully-enclosed gearbox protects against dirt and debris Special feature 8 Driver figure included     Requires A 7.2 battery & charger Requires B 2-channel radio gear and ESC Requires C TS plastic model paint

Tamiya 58517 Super Hotshot 2012 Kit Nødvendig tilbehør: Radio/Motaker med  minst 2 kanaler Batteri/Lader (7.2V Nimh eller 2S Lipo Rund kasse batteri anbefales) lader etter valgt batteri eller vår anbefaling E680 og ladekabel Deans/T-Plugg Regulator (Kan anbefale denne HW1060  om du bruker batteri med T-plugg/Deans, Med Tamiyakontakt HW1060 Servo (Vår anbefaling HD-9001MG ) Ønsket lexanlakk PS Se under relaterte produkter for anbefalt tilbehør:   As Super As Ever Tamiya ga opprinnelig ut en spesialversjon av 4WD racingbuggyen Hotshot i 1986. Denne berømte maskinen er satt til å komme tilbake som Super Hotshot og har moderne forbedringer samtidig som den beholder den grunnleggende layouten til originalen. Karakteristiske ytre funksjoner som det stilige sølvfargede karosseriet og bakvingen, gule oljedempere og knastedekk med gullmetallbelagte felger har også blitt beholdt. Moderne oppdateringer i chassiset opprettholder de originale egenskapene til Super Shot, inkludert den slitesterke ABS monocoque-rammen, rullebur og underbeskytter. Samtidig minimerer kulelager friksjonstap ettersom kraften fra den horisontalt monterte motoren overføres til alle fire hjulene via drivaksler av dogbonestype. 4-hjuls dobbel bærearmsoppheng er utstyrt med oljedempere som tillater 3 justerbare fjærspenninger for å matche baneforholdene. I tillegg gir en GT-tunet motor (25T) rikelig med kraft for dynamisk terrengkjøring            The Super Shot, which was originally released in 1986 is now available again as the re-named Super Hotshot. Specifications Length: 390mm　 Width: 235mm　 Height: 150mm　 Weight: 1,330g (not including R/C unit, battery pack)　 Tread: 205mm (Front), 208mm (Rear)　 Tire Width/Diameter: 31/88mm (Front), 38/88mm (Rear)　 ABS Monocoque Chassis Frame　 Shaft-Driven 4WD　 F/R 3-Bevel Differentials　 2-Piece Steering Tie-Rod　 4-Wheel Double Wishbone Suspension　 Gear Ratio＝8.1:1 or 10.04:1　 GT-Tuned Motor (25T) ESC - Not Incuded Anbefalt lakk fra Tamiya PS-12 X-2 X-11 XF-1 XF-2 XF-15  

Tamiya 58546 1/12 Vanessas Lunch Box CW-01 Black Edition Kit Byggesett av Tamiya Vannesas Lunch Box du trenger i tillegg for å få komplett bil, radio/motaker/servo, batteri og lader. 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri Inkludert THW1060 regulator. Skal bilen brukes anbefales det å kulelagre den: 1150 x 9 stk 850 x 1 Komplett lagersett : 54997 This R/C assembly kit recreates a fun and boxy classic VAN with over-sized monster truck tires. It is one of Tamiya's classic creations from the 1980’s (First released in 1987). It has been a fan favorite for its original appearance as much as for its R/C performance. The boxy minivan body has been raised up over monster truck wheels to ensure that this R/C van will grab the attention wherever you choose to drive it.  2WD Chassis Mounted on Big 115mm Diameter Tires  The durable and easy-to-assemble 2WD chassis employs a box type frame, and features front independent swingarms and a rear rolling rigid suspension. Big 115mm diameter tires offer dynamic running on even the toughest of surfaces. Sealed gearbox protects the diff gear from dirt and sand during off-road driving. Rear mounted wheelie bar enables wild stunt driving.  • 1/12 scale R/C model assembly kit. Length: 385mm, width: 290mm, height: 220mm.  • The legendary Lunch Box body is molded in red styrene for great realism.  • Comes with red color plated wheels.  • A new color variation of the classic stickers has white and blue stripes to go perfectly in the red theme!  • The durable and easy-to-assemble 2WD chassis features a box type frame with front swing arm independent and rear rolling rigid suspension setups.  • A pre-assembled, sealed gearbox protects the diff gear from sand and other intruding debris.  • Features a rear wheelie bar for wild wheels-in-the-air driving.  • Includes 540-motor.  • Requires: 2-Channel Radio, servo,ESC, 7.2-7.4volt battery pack & compatible charger, and Tamiya TS paint. (If you decide to paint the body) SPECIFICATIONS Adjustable Gear Ratio Fixed Bearings Plastic bushing Body Material ABS Plastic Body Stickers Included Chassis Material ABS Plastic Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Motor Brushed 540 Type Requires A 2-channel radio, steering servo, 7.2volt battery & battery charger Scale 1/10 Shock Damper Friction type Suspension Independent front/solid axle rear Terrain Use Multi-Purpose Electric R/C Car Series no.546 1/12 R/C Lunch Box "Black Edition" Item No: 58546 Length: 385mm. Image shows painted and assembled model.   Back, and in Black The popular Lunchbox model from Tamiya's catalog makes a comeback in stylish black. This R/C assembly kit features the trademark boxy minivan body with metal-plated fenders, front grille and dampers, and includes a sticker set to add the finishing touches. All this is raised up over monster truck wheels cased in 115mm tires for a cool number that you can take for a spin any time, anywhere.   2WD Chassis Mounted on Big 115mm Diameter Tires The durable and easy-to-assemble 2WD chassis employs a box type frame, front swingarm independent and rear rolling rigid suspension. Big 115mm diameter semi-pneumatic tires on black wheels offer dynamic running on even the toughest of surfaces. The sealed gearbox protects diff gear from dirt and sand during off-road driving and a rear mounted wheelie bar enables wild wheels in the air stunt driving.   Specifications ●Length: 385mm, Width: 290mm, Height: 225mm ●Weight: 1,560g (not including R/C mechanism and battery) ●Wheelbase: 207mm ●Tread: 212mm (Front), 216mm (Rear) ●F/R Tire Width/Diameter: 71/115mm ●ABS Box Type Frame ●Rear-wheel 2WD ●Suspension: Independent Swingarm (Front), Rolling Rigid (Rear) ●F/R Friction Dampers ●3-Bevel Differentials ●Gear Ratio: 14.7:1 ●Type 540 Motor ●Requires an Electronic Speed Controller (sold separately)   Separately Required Items ●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger Information is current as of December 2012. Specifications are subject to change without notice.

Tamiya 58570 1/10 Lancia Delta Integrale TT-02 4WD Kit (Inkl ESC THW-1060)  Byggesett av Lancia Delta Integrale, du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) Anbefalt kulelagersett : 54476 (Alternativ løse lager 4stk 1280 8x12x3.5 , 4stk 1150 5x11x4 , 8stk 1050 5x10x4 )   Se anbefalt tilbehør under relaterte produkter.   LAKK 【 The 1992 Champion 】　This is a 1/10 R/C model assembly kit of the Lancia Delta Integrale, winner of the 1992 World Rally Championship. The polycarbonate body recreates the look of the angular 4-door hatchback, complete with front/rear blister fenders and down to details such as the bulge on the front bonnet and the numerous air intakes in the front bumper. The kit also includes separate parts to depict the side mirrors and roof spoiler. Stickers recreate the markings, including the famous Martini Racing stripes. The model runs on the shaft driven 4WD TT-02 chassis, and comes complete with rally block tires to allow it to drive on road or flat dirt. 【 Adaptable TT-02 Chassis offers balanced shaft driven 4WD 】　The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings (the higher position is used with the Lancia Delta Integrale) and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.   Grippy rally block tires will provide ample traction, even on flat dirt. Features high ground clearance at the front and rear. Gearbox cover can be removed simply with the loosening of screws on the frame. 4-bevel resin differential gears offer smooth movement. The chassis utilizes resin ball links in its joints. Wheel hubs are shaped to look like brake discs. Receiver case protects from dust. Motor cover includes removable cooling duct (not attached in above image). Battery pack is located in a longitudinal position on the left. Also compatible with LF3700-6.6V Racing Pack.     【 Specifications 】　●Length: 407mm, Width: 186mm, Height: 159mm ●Wheelbase: 257mm　●Tire Width/Diameter (Front and Rear): 27/69mm ●Bathtub-type Frame ●Shaft Driven 4WD ●Front/Rear 4-Bevel Resin Differentials ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front/Rear Friction Dampers ●Gear Ratio = 9.58:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) ●Type 540 Motor ●Electronic Speed Controller is included 【 Separately Required Items 】　●2-Channel R/C Unit　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Tamiya 58572 M-06 1/10 Volkswagen Beetle M-06 Kit Du trenger i tillegg for å få komplett bil, radio/motaker/servo, batteri og lader, lexan lakk. This is the M-06 M-chassis machine fitted with Tamiya's classic Volkswagen Beetle Type 1 Body.. The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and the iconic car saw military service during the Second World War. The R/C model of this car was released in 1996 on the M-04 chassis. The 2013 model now sits on the modern and highly popular rear wheel drive M-06 chassis platform.  FEATURES Chassis: Molded plastic bathtub style Drive: Rear wheel Differential: Planetary gear type Shocks: Friction, plastic body Body: Clear lexan untrimmed Volkswagen Beetle with chrome plated plastic bumpers and mirrors Motor: 540 size brushed ESC Tamiya TBLE-04S Bumper: Front, urethane foam Tires: On-road 0.94" (24mm) wide, 2.2" (56mm) diameter, with 60D radial tread and foam inserts Suspension: Fully independent double wishbone Wheels: One piece plastic with chrome finish 0.94" (24mm) wide, 1.5" (38mm) diameter Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: 3-piece linkage INCLUDES M-06L Chassis Car Kit with tires, chrome wheels, foam inserts, tires, 20T pinion gear, shocks, decal sheet, instruction manual, 540 motor ESC, and instruction manual REQUIREMENTS Radio: 2-channel with high-speed steering servo Battery: 6-cell 7.2V stick pack Battery Charger: To match selected battery Paint: Polycarbonate safe spray or brush-on Building and track equipment SPECIFICATIONS Vehicle; Width: 6.5" (165mm) Tread: 5.4" (138mm) distance between wheel centers side-to-side Wheelbase: Choice of three by changing rear section, Short: 8.3" (210mm) Medium: 8.8" (225mm) Long: 9.4" (239mm) Body; Length: 13.5" (370mm) Width: 6.5" (168mm) Height: 3.75" (114mm)

Tamiya 58577 NovaFox 1/10 2WD Kit Nødvendig tilbehør: 1 x servo Radio/Motaker Batteri/Lader Ønsket lexanlakk PS Se under relaterte produkter for anbefalt tilbehør:   【 Back on the Track! 】　This is an update of a popular 2WD buggy model which was a stablemate of the famous Hotshot in the late 1980s. The elegant, slim polycarbonate body brings to mind the image of a full-size racing buggy, and its markings take inspiration from the original model. Jazzy gold color metal-plated wheels are fitted with front ribbed and rear oval block tires for excellent off-road performance. The model includes a driver figure to install in the cockpit.   【 Updated Rear-Wheel 2WD Off-Road Chassis 】　This classic model retains its highly dust-resistant monocoque frame and 4-wheel independent double suspension, while also receiving updates to make it suited to the modern R/C world. Dog-bone type drive shafts are added, as is a stabilizer to help neutralize roll. Sealed gearbox and rear uprights now include a total of 8 ball bearings as standard, providing even more effective power transmission.    The front of the model features monoshock front double-wishbone suspension and a stabilizer to reduce roll.    Rear suspension features 2 CVA dampers placed near-vertically. Also fitted with dog-bone type drive shafts as standard.    Slim and durable monocoque frame provides excellent protection for the R/C equipment contained inside.   【 Specifications 】　●Length: 425mm ●Height: 133mm ●Width: 225mm ●Weight: 1,140g (Not including R/C equipment and battery pack) ●Wheelbase: 260mm ●Tread: 198mm (Front), 183mm (Rear) ●Tire Width/Diameter: 23/83mm (Front), 38/88mm (Rear) ●ABS Resin Monocoque Frame ●Rear-Wheel 2WD ●3-Bevel Differentials ●4-Wheel Double Wishbone Suspension ●CVA Oil Dampers x3 (Front & Rear Total) ●Gear Ratio= 8.7:1, 7.25:1 ●Type 540 Motor ●Requires Electronic Speed Controller (sold separately) ※Cannot be used with Tamiya LF3700-6.6V Racing Pack (sold separately)   【 Separately Required Items 】　●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter      

Tamiya 58587 - NEO Fighter Buggy 2WD DT-03 Kit Nødvendig tilbehør: Radio/Motaker/Servo Batteri/Lader PS lakk til Lexan body Regulator (Vi kan anbefale denne HW1060) For full kulelager option trenger den 14 stk 5x11x4 lager (1150) alternativ 54579 16x5x11x4   Neo Fighter Buggy er montert på det ny utviklede DT-03 chassisplattformen. Dette chassiset er lett å montere og enkelt og vedlikeholde. DT-03 er ment som en lett-å–komme–i gang-modell for å oppmuntre unge sjåfører til å komme inn i RC verdenen. Den lar sin intuitive men tøffe utforming og problemfri montering en enkel og rimelig inngang til RC. Den gir mindre erfarne brukere muligheten til å ta fatt med R/C modell bil bygging og kjøring. Dette er ren glede. Neo Fighter Buggy (DT-03 Chassis) Item No: 58587 Length: 400mm. Image shows assembled and painted kit. 【 A Fighter, and a Winner! 】　The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers! 【 DT-03 Chassis: Great Fun, Minimum Fuss 】 The stylish slimline form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to friction dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering. Front suspension arms are attached at a 25-degree angle to improve off-road ability. Rear gearbox is sealed to protect from dust and dirt, and the built-in differential provides smooth cornering. Dust cover protects the model's R/C equipment from sand and dust, helping prevent running trouble. The sticker sheet includes logos used on the original Frog model, plus Neo Fighter Buggy logos. Paint the tough polycarbonate body and apply markings as you like to create your own cool racer! 【 Specifications 】　●Length: 400mm, Width: 248mm, Height: 132mm ●Wheelbase: 287mm ●Tread (Front/ Rear): 221mm/208mm ●Tire Width/Diameter: 27/80mm (Front), 41/86mm (Rear) ●Monocoque Frame ●Rear Wheel 2WD ●3-Bevel Differentials ●2-Piece Steering Tie-Rod ●Front & Rear Double Wishbone Suspension ●Gear Ratio = 9.28:1 ●Type 540 Motor ●Requires electronic speed controller (sold separately) 【 Separately Required Items 】　●2-Channel R/C Unit with Reciver　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter Information is correct as of February 18, 2014. Specifications are subject to change without notice.    

Tamiya 58611 - WR-02C Honda City Turbo 1/10 Kit Leveres med THW-1060 regulator med Tamiya batteri kontakt, fin starterpakke for Tamiya biler her med Radio/Motaker, 1 batteri med enkel USB lader og en servo. M-Style Nødvendig tilbehør: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Rundkassebatteri og Lader for valgt batteri A Funky Blast from the Past! Dette bygesettet er en komisk gjenskaping av racingversjonen av Hondas 1983-lansering i Japan – City Turbo. Det tøffe hardplastkarosseriet har skarp støping, og settet inkluderer en førerfigur med hjelm for å gi ekstra moro. Klistremerker følger med for å dekorere bilens karosseri og førerhjelmen. WR-02C-chassiset er nytt for denne modellen, og det kjører på dekk med asymmetriske venstre-høyre-mønster. The 58611 kit was reissued July 19th 2025, at 22.000 Yen. This RC model is an updated release of a Tamiya classic, which was released as "Willy"s Wheeler" back in 1983. It has returned upon a newly-overhauled variant of the WR-02 chassis. It is fitted with a Honda City Turbo body, which also includes a comical driver figure. WR-02C The WR-02 chassis features a 2WD drive-train with fully independent double wishbone suspension. The 185mm wheelbase WR-02C chassis utilizes a sturdy monocoque frame which encompasses and protects the gearbox, enhanced by side members. The gear differential unit housed inside the sealed gearbox receives its power from the centerline-mounted motor, and passes it on to the rear wheels. A longitudinal position for the battery pack contributes to the model's optimal weight distribution to ensure that when the City Turbo accelerates in a hurry, it performs a dynamic and thrilling wheelie, cushioned by the wheelie roller bar to ensure that the car doesn't topple over. The steering servo is also positioned along the centerline of the chassis, using a 2 tie-rod setup for straightforward handling. The model also features 4-wheel independent double wishbone suspension for a smooth ride. For ease of assembly, the gearbox and motor come pre-assembled. Tire Width/Diameter: 35/70mm (Front), 42/70mm (Rear) Resin Monocoque Frame Rear-Wheel 2WD 4-Wheel Double Wishbone Suspension Front/Rear Friction Dampers 2-Piece Steering Tie Rod 3-Bevel Differentials Gear Ratio: 16.5:1 Torque-Tuned Motor

Tamiya 58618 Monster Beetle 2015 Kit Monster Beetle 2015 fra Tamiya, kit med resin hardplastkarosseri i rødt. Nødvendig tilbehør: 1 x servo Radio/Motaker Batteri/Lader  Ønsket klarlakk for glans TS Inkludert Regulator THW-1060-RTR Se under relaterte produkter for anbefalt tilbehør: The Tamiya Monster Beetle was a classic R/C phenomenon from the 1980’s. After a long absence it is back as an updated assembly kit ready to traverse back yards across the country. The model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted with big tires for rough-and-tumble off-road fun. This updated version promises to be great fun for both beginners and Tamiya R/C kit veterans alike! Look Who's Back! This re-release version of the Monster Beetle assembly kit features a number of updates while keeping the basic layout of the original off-road car released in 1986. It features a realistic customized Beetle body depicted in tough polystyrene resin, with metal-plated parts supplied in the kit to add the finishing touch for handles and headlight frames. A resin driver figure is the icing on top of the cake! Tough Space Frame Chassis This hardy model's rear-wheel drive chassis is based around a durable ABS space frame to withstand all-action off-road driving. 4-wheel independent suspension uses CVA oil dampers, and has double wishbone front and trailing arm rear setups. Superlative cushioning and grip are provided by 130mm-diameter, 58mm-width lug pattern pin spike tires on flashy gold color plated wheels. Efficient and durable universal shafts come with rubber boots. Specifications ●Length: 410mm ●Width: 285mm ●Height: 240mm ●Wheelbase: 247mm ●Tread: 220mm (Front); 225mm (Rear) ●Tire Width/Diameter: 58mm/130mm ●ABS Resin Space Frame ●Rear-Wheel Drive ●3-Bevel Differential Gear ●2-Piece Steering Tie-Rod ●Suspension: Double Wishbone (Front); Trailing Arm (Rear) ●Oil Dampers ●Gear Ratio = 14.7:1 ●Type 540 Motor ●Electronic Speed Controller  Separately Required Items ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter

Tamiya 58633 Blackfoot 2016 Kit BlackFoot fra Tamiya, kit med støpt hardplastkarosseri i sort inkludert motor og regulator (ESC) Nødvendig tilbehør: 1 x servo Radio/Motaker Regulator (vår anbefaling HW1060) INKLUDERT THW1060 Batteri/Lader  Ønsket klarlakk for glans TS Se under relaterte produkter for anbefalt tilbehør:   This is a modern successor to the Blackfoot line of trucks. It features the classic body from the Blackfoot III kit and it is mounted on the chassis used in the Monster Beetle (2015) radio control model. The chassis is an all-action 2WD machine fitted with big tires for rough-and-tumble off-road fun. The Blackfoot R/C model is ideal for great fun for both beginners and Tamiya connoisseurs alike.   Product Specifications (Specifications subject to change) Type Detail Scale 1/10 Construction type Assembly kit Terrain use Multi-Purpose Drive-train 2WD Drive type Gearbox Drive line Dog bone Differential type Gear Suspension Independent suspension Steering mechanism Direct servo Shock damper Oil-filled damper Shock damper material Plastic Tire type Rubber Tire tread Lug/pin-spike Body material ABS Plastic Chassis material Plastic Electronic Speed Control (ESC) Included ESC model Not included LED Light buckets No LED lights No Motor 540-brushed type Bearings Plastic bushing Adjustable camber Fixed Adjustable toe angles Front only Adjustable ground clearance Fixed Adjustable gear ratio Yes Adjustable wheelbase Fixed Adjustable track width Fixed Adjustable shock angle Fixed Special feature 1 Length: 440mm, width: 290mm, height: 270mm. Special feature 2 The ABS resin Blackfoot III body has newly designed markings that carry on the theme of the original series of Blackfoot models. Special feature 3 Plastic driver figure is included. Special feature 4 The rugged ABS space frame chassis utilizes double-wishbone front and trailing arm rear suspension setups in tandem with CVA oil dampers. Special feature 5 Rear universal drive shafts come with rubber boots to protect them from dust. Special feature 6 A resin undercover protects the sealed gearbox at the rear of the model. Special feature 7 123mm semi-pneumatic lug pattern tires are paired with yellow 1-piece wheels. Requires A 2-channel radio gear Requires B 7.2 battery & charger Requires C TS plastic model paint    

Tamiya 58643 1/10 The Grasshopper II (2017) Kit Grasshopper II kit fra Tamiya, dette er relansert versjon fra 1988! Drev for bruk sammen med 540motor 18t 32P 0.8M Du trenger i tillegg. 1 x servo Radio/Motaker Batteri/Lader Lakk av TS type hvis man vil lakkere TS Klarlakk hvis man vil ha blank finish Se under relaterte produkter for anbefalt tilbehør:   The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model.   Product Specifications (Specifications subject to change) Type Detail Scale 1/10 Construction type Assembly kit Terrain use Off-Road Drive-train 2WD Drive type Gearbox Drive line Solid axle Differential type Gear Suspension Independent front/solid axle rear Steering mechanism Direct servo Shock damper Friction damper Shock damper material Plastic Tire type Rubber Tire tread Grooved front/pin spike rear Body material ABS Plastic Chassis material Plastic Electronic Speed Control (ESC) Included ESC model TBLE-02S LED Light buckets No LED lights No Motor 380-brushed type Bearings Plastic bushing Adjustable camber Fixed Adjustable toe angles Front only Adjustable ground clearance Fixed Adjustable gear ratio Fixed Adjustable wheelbase Fixed Adjustable track width Fixed Adjustable shock angle Fixed Special feature 1 Length: 400mm, width: 221mm, height: 139mm Special feature 2 The Grasshopper II body is molded in durable polystyrene resin, and has a driver figure for attachment. Special feature 3 Features a rugged ABS resin bathtub chassis. Special feature 4 Front swing axle and rear rolling rigid suspension setups are actuated by coil-sprung friction dampers. Special feature 5 Fully enclosed rear gearbox contains a differential gear to aid smooth cornering. Special feature 6 Front ribbed tires give great straight-ahead grip, and rear spike tires provide powerful drive. They are matched with 8-spoke one-piece lightweight wheels. Special feature 7 Compatible with tune-up parts such as standard Type 540 motors (requires nine 1150 ball bearings & one 850 ball bearing) and CVA mini oil dampers. Special feature 8 Includes Tamiya TBLE-02 S ESC (May be used for brushed and brushless motor applications) Requires A 2-channel radio gear Requires B 7.2 battery & charger Requires C TS plastic model paint

Tamiya 58650 1/10 Volkswagen Beetle Rally - MF-01X Kit (NO ESC) Nødvendig tilbehør: Radio/Motaker, Regulator, Batteri/Lader/Servo/PS- Lakk (Se relaterte produkter for vår anbefaling)   This R/C model assembly kit recreates the classic Volkswagen Beetle in rally racing form. Thanks to its superlative reliability and uncomplicated upkeep, it was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. The VW body sits atop Tamiya’s proven shaft-driven 4WD MF-01X chassis, which is at home on a range of surfaces from road to flat dirt. About the MF-01X: Power is transmitted from the rear mounted motor to the front wheels via a propeller shaft that runs down the side of the MF- 01X. Gearboxes are integrated into the monocoque for a sturdy and easy-to-assemble structure. The MF-01X has a three-section make-up; changing the central spacer section enables short (210mm), middle (225mm), and long (239mm) wheelbases. The Rallye Beetle uses the 239 mm wheelbase configuration.    Product Specifications (Specifications subject to change) Type Detail Scale 1/10 Construction type Assembly kit Terrain use On-Road Drive-train 4WD Drive type Gearbox Drive line Dog bone Differential type Gear Suspension Fully independent double wishbone Steering mechanism Direct servo Shock damper Friction damper Shock damper material Plastic Tire type Rubber Tire tread Radial Body material Polycarbonate Chassis material Plastic Electronic Speed Control (ESC) Not Included (Anbefaler HW1060) ESC model TBLE-02S LED Light buckets No LED lights No Motor 540-brushed type Bearings Plastic bushing Adjustable camber Fixed Adjustable toe angles Front only Adjustable ground clearance Yes Adjustable gear ratio Yes Adjustable wheelbase Yes Adjustable track width Fixed Adjustable shock angle Fixed Special feature 1 Length: 385mm, width: 178mm, height: 175mm Special feature 2 The Beetle body is expertly captured in lightweight, durable polycarbonate Special feature 3 Side mirrors are recreated using separately molded plastic parts Special feature 4 The 4WD MF-01X chassis has a rear mounted motor, and uses a prop shaft to transmit power to the front wheels. It features a robust, easy to maintain monocoque frame. It is at home on road and flat dirt surfaces Special feature 5 This model uses the L wheelbase (239mm). The chassis can be set up in S (210mm) and M (225mm) wheelbases using separately-sold propeller shafts Special feature 6 A range of option parts are available to hop up the MF-01X chassis, including lightweight, rigid aluminum propeller shafts Special feature 7 Includes a Tamiya TBLE-02S ESC and Torque Tuned motor. ESC features brushless motor mode for easy expandability Requires A 2-channel radio gear Requires B 7.2 battery & charger Requires C Polycarbonate paint

Tamiya 58654 - 1/10 Lancia 037 Rally TA02-S Kit Nødvendig tilbehør: Radio/Motaker Servo Batteri og Lader Lakk for Hardplast(TS)/Byggeverktøy Kjør en legende Lancia 037 Rally ble utviklet for Gruppe B-løp, og var en bakhjulsdrevet bil med racingspesifikasjoner for chassis, en 2-liters DOHC rekkefiremotor med kompressor på over 300 hk og et aggressivt karosseri designet av Pininfarina. Den slo konkurrentene av banen med en én-to-plassering i sesongåpningen av Monte Carlo Rally i 1983, og fortsatte i samme stil med seire i det 5., 6., 7. og 10. løpet, noe som ga den produsentmesterskapet. Fantastisk realisme og spennende drivkraft Dette er et fjernstyrt modellbyggesett som viser den dominerende Lancia 037 Rally-bilen som prydet rallyscenen i 1983. Det støpte karosseriet fanger den stilige 037 Rally-formen på en mesterlig måte med karakteristiske spoilere foran og bak. Separate deler viser vindusviskere, sidespeil og fire tåkelys foran; gjenskapinger av lysene bruker metallbelagte og klare linser for suveren realisme. Interiørdeler (med bilder av fører og medfører) er også inkludert, pluss klistremerker som viser sponsorlogoer. Det akseldrevne 4WD TA02-S-chassiset tilbyr god ytelse med uavhengig firehjulsoppheng med doble wishbone-armer, CVA-oljedempere, realistiske halvglansbelagte felger og semi-slick racingdekk. Spesifikasjoner ★Length: 422mm, Width: 186mm, Height: 132mm ★Wheelbase: 236mm ★Tread (Front & Rear): 152mm ★Tire Width/Diameter (Front & Rear): 27/65mm ★Bathtub-Type Frame ★Shaft-Driven 4WD ★3-Bevel Differential (Front), Ball Differential (Rear) ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★CVA Oil Shocks ★Gear Ratio = 8.59:1 ★Type 540 Motor ★ ESC (Regulator) Inkludert Lakk/maling anbefalt av Tamiya: TS-26 Pure White X-2 White X-6 Orange X-11 Chrome Silver X-18 Semi Gloss Black X-26 Clear Orange X-27 Clear Red XF-1 Flat Black XF-2 Flat White XF-7 Flat Red XF-8 Flat Blue XF-15 Flat Flesh XF-19 Sky Grey

Tamiya 58656 - 1/10 Mercedes 190E E2 ZackSpeed "debis" TT01E  Byggesett av Mercedes-Benz 190E 2.5-16 - TT01E Evo.II, Radiostyrt byggesett av DTM bilen. Modellen er konstruert på TT-01E chassiset, med firehjulsdrift. Dette chassiet er designet for enkel bygging og vedlikehold. Karosseriet er i holdbart polykarbonat (lexan) og modellen leveres med en kraftig børstemotor.  Du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Regulator (Kan anbefale denne HW1060  om du bruker batteri med T-plugg/Deans, Med Tamiyakontakt HW1060 Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) Se anbefalt tilbehør under relaterte produkter.   Se anbefalt tilbehør under relaterte produkter.   LAKK   Dette er en klassisk Mercedes DTM bil fra begynnelsen av 1990-tallet. Den gjenskaper den ikoniske 190 E 2.5-16 Evo.II. Lakkeringen i dette settet gjenskaper trofast fargene til Team Zakspeed-bilen som kjørte  DTM i 1991. Av spesiell historisk veddeløpsnote; i løp 6 og 7 av sesongen ble bilen nummer 20, da kjørt av en ung Michael Schumacher, som senere vant 7 verdensmesterskap i Formel 1. Hovedsponsor for bilen var Daimler-Benz sitt nå nedlagte konsernselskap Debis. TT-01 E (Evolved Chassis) Chassiset til den utviklede akseldrevne 4WD TT-01 Type-E har motoren og batteriet nær bakken for lavere tyngdepunkt og optimal balanse. Montert på chassiset er et glassfiberforsterket nylon toppdekk og girdeksler som forbedrer stivheten, samt en 3-delt avstiver som gir jevn styring. Det lave tyngdepunktet, den svært balanserte designen, 4-hjuls doble bærearmfjæringssystem og differensialgir foran og bak gjør dette til en lettkjørt og morsom bil. • 1/10 skala R/C-modellmonteringssett. Lengde: 445 mm, bredde: 184 mm. • Karosseriet er laget av slitesterkt polykarbonat,(lexan) med separate støpte speil-, vinge- og gitterdeler, samt et belagt Mercedes-Benz 3-spiss stjerneemblem. • Merkeklistremerker inkludert for å gjenskape sponsorlogoer og numre på No.20-bilen. • 6-eikers hjul er støpt i mykt grønt og sammenkoblet med slicks gummi dekk. • TT-01 Type-E-chassiset har akseldrevet 4WD-system og full uavhengig fjæring som gir enkel håndtering og gode tilpassbarhet. Lakk/maling anbefalt av Tamiya: PS-1 White PS-21 Park Green PS-31 Smoke TS-26 Pure White X-18 Semi Gloss Black Spesifikasjoner: Lengde: 44,5 cm Bredde: 18,4 cm Chassis type: TT-01E Skala: 1/10 Terreng: On-road Drift: 4WD Batteripakke: 7,2V Ni-Mh eller en 7.4V Lipo pakke (Round case) med Tamiya-kontakt (ikke inkludert) Motor: Type 540 Børstemotor (inkludert) Forseglet differensial Body: Klar lexan (lakk/maling ikke inkludert)

Tamiya 58664 1/10 Ford Mustang GT4 (TT-02) Kit  Byggesett av Ford Mustang GT4 (TT-02), du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Regulator (Kan anbefale denne HW1060 ) Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS)   Se anbefalt tilbehør under relaterte produkter.   LAKK DESCRIPTION Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 has been designed and engineered jointly by Ford Performance and Multimatic Motorsports to compete in sports car championship racing series globally, including the IMSA Continental Tire SportsCar Challenge, Pirelli World Challenge GTS/GT4, and GT4 European Series.  The Tamiya Ford GT4 faithfully captures this sleek racing car as a 1/10 scale radio control replica. The highly-detailed polycarbonate body sits atop the easy-to-build Tamiya TT-02 chassis that you can customize for added performance!  TT-02 Chassis:  The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.  • 1/10 scale R/C model assembly kit. Length: 459mm.  • Polycarbonate body was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate.  • Wheel arches are pre-cut out for a simpler body assembly experience.  • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis.  • Separately molded plastic components depict rear wing and side mirrors.  • Racy 10-spoke wheels are molded in gun metal and paired with slick tires.  • Stickers are included to create an original livery, as are masking stickers for use when painting.  • Includes Tamiya Torque Tuned Motor.  • Requires: 2-Channel Radio, servo, ESC, 7.2-7.4volt battery pack & compatible charger, and Tamiya PS paint.   Length: 459mm. Image shows painted and assembled kit.   ★This R/C model assembly kit depicts the Ford Mustang GT4, a powerhouse developed by the US auto giant in line with GT4 class regulations. ★The dominating form of the car is captured stylishly by a lightweight and durable polycarbonate body. ★The TT-02 chassis provides a proven, adaptable and user-friendly base for the model. ★Gun metal color 10-spoke wheels are paired with racing slick tires. Information is correct as of March 5, 2019. Specifications are subject to change without notice.

Tamiya 58664 1/10 Ford Mustang GT4 (TT-02) MED ESC Kit Byggesett av Ford Mustang GT4 (TT-02), du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) Leveres med TBLE-04S regulator og Torque tuned Mabuchi RS-540 motor   Se anbefalt tilbehør under relaterte produkter.   LAKK DESCRIPTION Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 has been designed and engineered jointly by Ford Performance and Multimatic Motorsports to compete in sports car championship racing series globally, including the IMSA Continental Tire SportsCar Challenge, Pirelli World Challenge GTS/GT4, and GT4 European Series.  The Tamiya Ford GT4 faithfully captures this sleek racing car as a 1/10 scale radio control replica. The highly-detailed polycarbonate body sits atop the easy-to-build Tamiya TT-02 chassis that you can customize for added performance!  TT-02 Chassis:  The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.  • 1/10 scale R/C model assembly kit. Length: 459mm.  • Polycarbonate body was designed with access to the actual car’s CAD data for superb accuracy. Front and rear light cases are also molded in polycarbonate.  • Wheel arches are pre-cut out for a simpler body assembly experience.  • The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis.  • Separately molded plastic components depict rear wing and side mirrors.  • Racy 10-spoke wheels are molded in gun metal and paired with slick tires.  • Stickers are included to create an original livery, as are masking stickers for use when painting.  • Includes Tamiya Torque Tuned Motor.  • Requires: 2-Channel Radio, servo, 7.2-7.4volt battery pack & compatible charger, and Tamiya PS paint.   Length: 459mm. Image shows painted and assembled kit.   ★This R/C model assembly kit depicts the Ford Mustang GT4, a powerhouse developed by the US auto giant in line with GT4 class regulations. ★The dominating form of the car is captured stylishly by a lightweight and durable polycarbonate body. ★The TT-02 chassis provides a proven, adaptable and user-friendly base for the model. ★Gun metal color 10-spoke wheels are paired with racing slick tires. Information is correct as of March 5, 2019. Specifications are subject to change without notice.

Tamiya 58667 1/10 Audi quattro Rallye A2 TT-02 4WD Kit  Byggesett av Audi quattro Rallye A2, du trenger i tillegg til kitet for å få det komplett: Regulator/Esc : Vi anbefaler HW1060 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS)   Se anbefalt tilbehør under relaterte produkter.   LAKK A Giant of the Rally World The Audi quattro is a true rallying legend that was a pioneer of 4WD rally technology. This is an R/C model assembly kit recreating the Audi quattro Rallye A2, the car which debuted in 1983. It features an accurate polycarbonate body recreating the 2-door form, with separate parts for side mirrors, rear wing and light cases. The adaptable TT-02 chassis provides the base, with 5-spoke wheels and tread patterned tires.   TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. 5-spoke wheels are paired with tread-patterned tires.   ★The instantly recognizable form of the car is recreated accurately in lightweight and durable polycarbonate. ★Also included in the kit are stickers to decorate the body, plus masking stickers for use in the paint job. ★Separate parts capture the distinctive triple fog lamp clusters, which add to the rally air of the model.   ★This close-up shot shows the bullet-shaped side mirrors, also recreated using separately molded parts. ★At the rear of the car, the sporty wing is another separate part, with sticker-depicted oil coolers. ★Silver color 5-spoke wheels are paired with tread-patterned racing radial tires that provide a grippy drive.   Specifications ★Length: 458mm, Width: 187mm, Height: 135mm ★Wheelbase: 257mm　★Tire Width/Diameter: 26/66mm (Front & Rear) ★Bathtub-type Frame ★Shaft-Driven 4WD ★Front/Rear 4-Bevel Resin Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front/Rear Friction Dampers ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-Channel R/C Unit with ESC ★Battery Pack & Charger ★R6/AA/UM3 batteries for transmitter Information is correct as of June 25, 2019. Specifications are subject to change without notice.

Tamiya 58672 - Monster Beetle Trail GF-01TR Kit Nødvendig tilbehør:  Radio/Motaker Batteri/Lader Servo GF-01TR: Fantastisk framkommelighet ! Dette firehjulsdrevne chassiset er basert på en lett og tøff monocoque-ramme, med kraft levert av den sentralt plasserte motoren. Reduksjonsgir/Portaler på hver aksel reduserer drivakselrotasjonen for enormt trekkraft, god bakkeklaring og evnen til å takle tøft terreng. Girkassen er forseglet for å beskytte mot støv og rusk, og integrert i rammen; innebygde differensialgir gir utmerket trekkraft og holdbarhet ved bruk av inkludert differensialsparkel. Firehjuls dobbel wishbone-fjæring bruker friksjonsdempere, mens et todelt styrestag med servoen til venstre gir utmerket respons. Gule hjul er utstyrt med hybriddekk med spike- og traktor spikes mønster på 115 mm for overlegen demping og grep. Chassiset bruker et «firkantet» oppsett med lignende slitebane- og akselavstandslengder. Trail Beetle Dette byggesettet skaper et kjøretøy som tilbyr utmerket terrengkjøring. Støpt i detaljert ABS-plast, er det spreke karosseriet inspirert av spesialtilpassede Volkswagen Beetle, og har overdrevne skjermer, en forenklet bakende, trippel ekstralys og mer. Metallbelagte deler gjenskaper frontlykter, ekstralys og fremstilling av motoren. GF-01TR-chassiset gir en dynamisk terrengkjøring. Specifications ★Length: 333mm, Width: 270mm, Height: 215mm ★Wheelbase: 174mm　 ★Tread: 210mm (Front & Rear) ★Tire Width/Diameter: 68/115mm (Front & Rear) ★Monocoque Frame ★3-Bevel Differential Gears ★2-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★Gear Ratio = 37.35:1 (using kit standard 18T pinion gear) ★Type 540 Motor ★Electronic Speed Controller (ESC) is included ★Monster Beetle Trail tilbyr enormt grep som vil ta den over alle slags hindringer. ★Karosseriet er støpt i ABS-plast og byr på mange detaljer. Metallbelagte deler gir et ekstra lag med realisme. ★Fronten er utsmykket med trippel ekstralykter, som er metallbelagte deler med klistremerker for dekorasjon. ★Avbildninger av motor og lyddemper er også metallbelagte deler. Karosseriet har også en sporty veltebøyle. ★Bruk den medfølgende kitten i girdifferensialene for å gi denne modellen suverent grep. ★Alle hjul har navreduksjonsenheter, som reduserer drivakselens utgang for større dreiemoment. ★Chassiset har høyere bakkeklaring som ytterligere øker dens egenskaper i tøft terreng. ★Kjernen i GF-01TR-chassiset er en slank monocoque som også fungerer som girkasse. ★Ta en nærmere titt på det komplekse drivverket, vist her i denne profilvisningen av chassiset.

Tamiya 58674 1/10 TOYOTA GR Supra 2019 TT-02 4WD  Leveres med torque tuned motor men uten regulator. Byggesett av TOYOTA GR Supra 2019 TT-02 4WD  , du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Regulator : Vår anbefaling: Quicrun 1060 Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS)   Se anbefalt tilbehør under relaterte produkter.   Length: 457mm. Image shows painted and assembled kit.   A Real Beauty Upon its global debut in January 2019, the TOYOTA GR Supra created a worldwide buzz. Now, it appears as an R/C model assembly kit. The sensuous long nose, short deck form with striking double-bubble roof is recreated in lightweight and durable polycarbonate, with separate polycarbonate front and rear light cases, plus molded plastic side mirrors. Stickers are included in the kit to depict details such as wipers and emblems, and the car is based upon the reliable and beginner-friendly TT-02 chasssis.   TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. 10-spoke wheels feature rim stickers and are paired with tread-patterned racing radial tires. Specifications ★Length: 457mm, Width: 188mm, Height: 133mm ★Wheelbase: 257mm　★Tire Width/Diameter: 26/66mm (Front & Rear) ★Bathtub-type Frame ★Shaft-Driven 4WD ★Front/Rear 4-Bevel Resin Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front/Rear Friction Dampers ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of November 20, 2019. Specifications are subject to change without notice.

Tamiya 58677 M-06 1/10 Volkswagen Karmann Ghia Kit Du trenger i tillegg for å få komplett bil, radio/motaker/servo, batteri og lader, lexan lakk. Length: 410mm. Image shows painted and assembled kit. A Classy Ride 1955 was the debut of the Volkswagen Karmann Ghia, which combined a Volkswagen chassis with a 2+2coupe body designed by Italian outfit Ghia and manufactured in Germany by Karmann. An air cooled flat-four engine in the back powered the rear wheels, and its fusion of looks, low ride height and affordable price tag made it a popular model that still retains a fan base in the modern day. This radio control model assembly kit depicts the car in 1/10 scale. The elegant lines of the low-slung car are accurately recreated by a polycarbonate body, with separately molded metal-plated light case, bumper and side mirror parts adding extra realism.   ★Left: The front of the model is resplendent with plated bumper and overriders. Light cases are compatible with separately sold LEDs. ★Right: The side mirror is fastened from the inside of the polycarbonate body using snap pin. This is a dedicated part for this car.   ★Left: The rear bumper is also metal-plated, and rear light cases can be fitted with separately sold LEDs for an extra level of realism. ★Right: Classic metal-plated dish wheels add a further accent to the model, and are paired with grippy, treaded tires for a great drive.   Great RR Performance from the M-06 The M-06 chassis features a rear-mounted motor, rear-drive setup and has a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses metal-plated wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response.   ★Left: The M-06 chassis' three-piece steering linkage ensures you have great control and direct steering feel. ★Right: A close-up on the independent double wishbone front suspension setup, which employs friction dampers.   ★Left: The rear-mounted motor, rear-wheel drive setup provides the model with excellent traction at the rear. ★Right: A close-up on the rear suspension. Use separately sold pinion gears to achieve different gear ratios.   Specifications ★Length: 410mm, Width: 182mm, Height: 125mm ★Wheelbase: 239mm ★Tread (F/R): 138mm ★Rear-Motor, Rear-Wheel Drive ★3-Bevel Differential Gear ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio = 5.8:1 (using kit-standard 20T pinion) ★Tire Width/Diameter (F/R): 25mm/59mm ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately)   Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of March 31, 2020. Specifications are subject to change without notice.

Tamiya 58684 1/10 Toyota GR Yaris 2020 M-05 FWD Kit Denne 4WD-sportsbilen ble kunngjort i 2020, og har et kompakt tredørs kombikarosseri. Den har forskjellige spennende karakterer: RZ med høy effekt og RZ med høy ytelse, RC-konkurransespesifikasjoner og FF-layout RS-modellen. Alle er sammenkoblet med GR-FOUR sports 4WD-system og en 272 hk 1,6-liters 3-sylindret motor. Dette byggesettet fanger opp slike funksjoner slik som den fremtredende radiatorgrillen, de svulmende bakskjermene og takspoileren bak, og gjenskaper det kraftige karosseriet i polykarbonat. Det forhjulsdrevne M-05-chassiset legger til rette for en livlig kjøring, og bruker svarte 11-eikers hjul med dekk utskåret med realistisk slitemønster. Leveres med den nye TBLE-02S ESC som kan kjøres påbåde børstemotor(medfølger) og Tamiya sin anbefaling av børsteløs motor. Du trenger i tillegg: Radio/Motaker, servo, standard stickpack/lipo round corner batteri, og lader til batteri, 1-2 bokser lakk.   ★Left: Rendering of powerful front mask. ★Right: Separate door mirrors with depictions of turn signals.   ★Left: Features a powerful image with bulging rear fenders and roof rear spoiler. ★Right: Black 11-spoke wheels have tires with realistic tread patterns and inner sponge.   M-05 Chassis: Low Center of Gravity, High Performance! The front wheel drive M-05 chassis features a lightweight, narrow, durable, and easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. 11-spoke wheels are molded in black and have tires with realistic tread patterns and inner sponge. In this kit, the chassis is setup with the 239mm L wheelbase.   ★Left: A centerline steering servo is at the heart of the 3-piece steering tie-rod for superb response. ★Right: This image gives a closer look at the front double-wishbone suspension with friction dampers.   ★Left: The kit includes a transponder stay component, which is a must for those who want to race. ★Right: The rear section can be re-configured for three different wheelbases (this model: 239mm).   Specifications ★Length: 372mm, Width: 168mm, Height: 137mm ★Wheelbase: 239mm ★Tread (Front & Rear): 138mm ★Tire Width/Diameter (Front & Rear): 25/59mm ★Monocoque Frame ★Front midship motor and front wheel drive system ★3-Bevel Differential Gear ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front & Rear Friction Dampers ★Gear Ratio = 5.8:1 ★Type 540 Motor ★Electronic Speed Controller (included)   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of October 5, 2020. Specifications are subject to change without notice.

Tamiya 58687 Ford Escort Mk.II Rally 1/10 (Painted Body) (MF-01X KIT)   Nødvendig tilbehør: Radio/Motaker, Batteri/Lader/Servo/Regulator (Se relaterte produkter for vår anbefaling) Uten ESC. Kjør et ikon! Den ikoniske Escort ble produsert mellom 1968 og 2004 av Ford Europe. Mk.II ble produsert fra 1975 til 1980, en frontmotor, bakhjulsdrevet bil med ett klassisk karosseri. RS1800 ble utstyrt med en høyytelses DOHC 4-sylindret motor og ble grunnlaget for en vellykket rallybil forrallyteam som sikret produsent- og sjåførmesterskap i 1979. Nå er denne rallylegenden gjenskapt i et radiostyrt byggesett , med en lexankarosseri som nøyaktig fanger den tidløse stilen. Basert på det allsidige MF-01X-chassiset, vil det gi mye moro på både vei og rallyunderlag. Anbefales å sette inn kulelager om den skal brukes. Kulelagersett : 54643  (Alternativ løse lager 20 stk 1150 5x11x4 , 2 stk 5x8x2.5 , 2 stk Flenslager 5x8x2.5mm ★The iconic boxy form of this two-door legend is rendered artfully in polycarbonate, pre-painted white. ★Plenty of separately molded parts up the realism - spotlights, headlight cases, bumper and side mirrors. ★Here is a close-up on the side mirror design. Window sections come pre-painted in tinted Smoke (PS-31).   ★The square lines of the rear are artfully depicted, with the spoiler on the boot also captured. ★Eight-spoke light blue wheels are paired with 60mm-diameter, 26mm-width rally block tires for great grip. ★Why not employ the separately sold Tamiya LED Light Unit to add even more realism to your Escort Mk.II Rally?   MF-01X - Compact 4WD At Home on a Range of Surfaces Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and 8-spoke wheels are paired with rally block tires.   ★This chassis features highly capable 4-wheel independent double wishbone suspension, with friction dampers front and rear. ★A slimline three-piece monocoque forms the centerpiece of the MF-01X chassis, and the propeller shaft is positioned to the right. ★The motor is planted in the 4WD chassis' rear, with power going via gears to the rear wheels and propeller shaft to the front.   Specifications ★Length: 414mm, Width: 172mm, Height: 135mm ★Wheelbase: 239mm (L) ★Tire Width/Diameter (Front & Rear): 26/60mm ★Tread (Front & Rear): 138mm ★Monocoque Frame ★Shaft-Driven 4WD ★3-Bevel Differential Gears ★2-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front & Rear Friction Dampers ★Gear Ratio = 9.5:1 ★Type 540 Motor ★Electronic Speed Controller (sold separately)   Separately Required Items ●2-Channel R/C Unit with ESC　●Battery Pack & Charger ●R6/AA/UM3 batteries for transmitter Information is current as of February 12, 2021. Specifications are subject to change without notice.  

Tamiya 58691 - 1/10 1998 Ford Escort MK5 Custom (TT-02) Kit Byggesett av 1998 Ford Escort Custom, du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Regulator (ESC) Vår anbefaling HW1060 Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS)   Se anbefalt tilbehør under relaterte produkter.   LAKK Length: 425mm. Image shows painted and assembled kit.   Custom Classic This R/C model assembly kit recreates a three-door hatchback Ford Escort Mk.6 with customizations such as blister fenders, front spoiler and rear wing. The powerful form is captured by a lightweight and durable polycarbonate body, and stickers are included to add detail. The model is based upon the adaptable and user-friendly TT-02 chassis, which offers shaft-driven 4WD.   ★Left: Take a look at the model from the rear, showing off the polycarbonate body's blister fenders and stylish wing. ★Right: Dedicated, separately injection molded parts are used to recreate the Escort's side mirrors.   ★Left: This image goes close-up on the mini wing at the rear, which is another separately molded component. ★Right: White dish wheels are in keeping with the simple look, and are paired with treaded tires.   TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. White dish wheels use tread patterned semi-pneumatic tires.   ★Left: Resin ball links in the steering linkage joints make for smooth, comfortable motion. ★Right: Wheel hubs are shaped to look like brake discs.   ★Left: Motor cover includes removable cooling duct (not attached in image). ★Right: This image gives a closer look at the rear double-wishbone suspension with friction dampers.   Specifications ★Length: 425mm, Width: 189mm, Height: 145mm ★Wheelbase: 257mm　★Tire Width/Diameter: 27/67mm (Front & Rear) ★Bathtub-type Frame ★Shaft-Driven 4WD ★Front/Rear 4-Bevel Resin Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★Front/Rear Friction Dampers ★Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of April 21, 2021. Specifications are subject to change without notice.  

Tamiya 58694 1/10 TOYOTA GR 86 2021 TT-02 4WD Leveres med torque tuned motor med regulator TBLE-04S. Byggesett av Tamiya 58694 1/10 TOYOTA GR 86 2021 TT-02 4WD  , du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) * ved valg av lipo må overgang AM-8003 benyttes eller lodde om ESC til t-plug/Deans. Se anbefalt tilbehør under relaterte produkter.   Length: 428mm. Image shows painted and assembled kit.   A Mouthwatering Prospect The Toyota GR 86 is a lightweight front-engine, rear-wheel-drive sports car which was announced in April 2021; Powered by a 2.4-liter horizontally opposed four-cylinder DOHC engine capable of 235hp, the GR 86 delivers direct feel and the joy of driving to owners. It is recreated by this R/C model assembly kit, with the stylish form expertly recreated by a polycarbonate body.   ★This image gives another angle on the model, with the car's stylish form captured by a polycarbonate body. ★Headlight cases are separate polycarbonate parts, and give a super realistic look with stickers applied. ★The air intakes which sandwich the front bumper on either side are also depicted with authenticity by stickers.   ★The Functional Matrix Grille is also depicted using a sticker; the license plate is cut out of polycarbonate. ★Stickers on the rear of the front fenders are on hand to ensure that air outlets are realistically rendered. ★Side mirrors use two types of black (bottom: semi-gloss); mirror surfaces are also cut out of polycarbonate.   ★Left: The roof indentation is captured in style, as is the stylish shark fin. ★Right: The duckbill trunk lid is an eye-catcher. Rear combination lamps are separate polycarbonate parts.   TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Black 10-spoke wheels use tread patterned semi-pneumatic tires.   ★Left: Resin ball links in the steering linkage joints make for smooth, comfortable motion. ★Right: Wheel hubs are shaped to look like brake discs.   ★Left: Motor cover includes removable cooling duct (not attached in image). ★Right: This image gives a closer look at the rear double-wishbone suspension with friction dampers.   Specifications ★Length: 428mm, width: 188mm, height: 131mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel resin differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of September 15, 2021. Specifications are subject to change without notice.

Tamiya 58695 - 1/10 Wild One RWD Off-Roader Blockhead Motors Kit KLASSIKER! Sett øynene på denne ferdiglakkerte versjonen av den klassiske Wild One Off-Roader, som er verket til Blockhead Motors' kreative drivkraft Jun Watanabe. Gitt en smakfull blå farge i kontrast til den røde og svarte fargeskalaen til originalen, er karosseriet ferdigmalt og kuttet, og kan utstyres med det medfølgende vindusnettet, skilt og til og med en dummy-antenne for det typiske retro utseende. Dedikerte klistremerker har Blockhead Motors-logoen blant mange flere for et travelt og stilig utseende. Kompatibel RWD Off-Road chassis! Modellens holdbare ramme av ABS-plast er matchet med et batterideksel som er kompatibelt med moderne batterier som Tamiya Racing Packs og LF-batterier.Firehjuls avhengig hjuloppheng er utstyrt med aluminiums oljedempere foran og bak, og frontdemperfestet er også av aluminium. Girkassedifferensialen gir jevne svinger og er plassert vekk fra sand og andre fremmedlegemer i en lukket girkasse; drivaksler med lavfriksjon av dogbones har støvmansjetter på leddene for ytterligere beskyttelse. Den sølvfargede veltebøylen har metallkomponenter, og sølvbelagte felger, opphengsarmer, sidevern og girkasse gir denne vognen en stilig finish. Nødvendig tilbehør: Radio/Motaker  Servo Regulator (ESC) Batteri og Lader Anbefalt tilbehør: Radio/Motaker med  minst 2 kanaler Batteri/Lader (7.2V Nimh eller 2S Lipo Rund kasse batteri) lader etter valgt batteri eller vår anbefaling E680 og ladekabel Deans/T-Plugg Regulator (Vår anbefaling HW1060) Servo (Vår anbefaling HD-9001MG ) Kulelager ( 10 stk 1150 5x11x4mm eller pakke med 16 stk 54579 ) + 3 stk 850 5x8x2.5mm Specifications ★Length: 425mm, width: 225mm, height: 140mm ★Wheelbase: 255mm　★Tread: 190mm (front & rear) ★ABS plastic box frame ★Polycarbonate body ★Rear motor, rear-wheel drive ★3-bevel differential ★2-piece steering tie-rod ★Single trailing arm suspension (front & rear) ★Tire width/diameter: 23/83mm (front), 38/38mm (rear) ★Aluminum oil dampers (front & rear) ★Gear ratio = 7.54:1, 9.05:1 ★Type 540 motor ★Electronic speed controller (ESC) is sold separately.       ★With a wide and low stance to offer great off-road performance, the buggy features a rear motor, rear-wheel drive setup. ★The durable box frame is molded in ABS plastic, and is compatible with Tamiya 7.2V Racing Packs and LF battery packs. ★This image gives a closer look at the trailing arm front suspension, with aluminum cylinder oil dampers for a great ride.   ★Silver color metal-plated wheels give a stylish accent, and at the front they are paired with ribbed tires for excellent directionality. ★Metal-plated parts are also used for the sealed rear gearbox, which contains a differential gear to give smooth cornering. ★Note the metal-plated arm on the rear trailing arm suspension setup, with aluminum cylinder oil dampers just like on the front.   ★Dogbone design drive shafts are highly durable, particularly with dust boots attached to offer extra protection when going off-road. ★Wider rear wheels are also metal-plated components, and are shod with hybrid oval block/spike pattern tires to ensure great grip. ★Window nets are a nice touch, bringing to mind a full-size racer. The polycarbonate driver figure also comes pre-painted.   ★Car number boards at the rear are finished with a base yellow sticker and then your desired number stickers on top. Customize! ★Check out our PR video for the model on our YouTube channel!    

Tamiya 58696 1/10 Super Avante (TD4) Et supernytt ansikt! Dette byggesettet skaper Super Avante, en 4WD buggy som er tildelt Tamiyas legendariske Avante-navn. Den har en eksepsjonelt lav profildesign muliggjort delvis av dens fremre innvendig fjæring, med en akseldrevet 4WD-drivlinje drevet av en midtstillt motor og har kuledifferensialer både foran og bak og leveres fullt kulelagret. Dens futuristiske karosseridesign er laget av Kota Nezu ved znug design, og har mange klare seksjoner som bare bidrar til Super Avantes utpreget moderne stemning, det samme gjør cockpit-bakstøtten og de fire miniskjermene.  Nødvendig tilbehør: Radio/Motaker, regulator, batteri lader og lexan lakk. Electric R/C Car Series no.696 1/10 R/C Super Avante (TD4) Item No: 58696 Length: 387mm. Image shows painted and assembled kit.   A Super New Face This R/C model assembly kit creates the Super Avante, a 4WD off-road buggy that is bestowed with Tamiya's legendary Avante name. It features an exceptionally low profile design enabled in part by its front inboard suspension, with a shaft-driven 4WD drivetrain powered by a midship motor and employing front/rear ball differentials plus full ball bearings. Its futuristic body design is the work of Kota Nezu at znug design, and features numerous clear sections that just add to the Super Avante's distinctly modern mood, as do the cockpit-rear buttress and the four mini fenders.     ★Take a separate look at the pioneering, futuristic design (the work of Kota Nezu at znug design) from the rear of the model, too! ★Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders. ★This is a close-up on the driver figure included in the kit, who is ready to take the wheel and give your buggy a realistic look.   ★A further glance inside the cockpit shows stickers for display elements. Clear parts are used in three other locations across the car. ★All four wheels have an individual mini-fender; they are both practical (helping to block flying debris) and provide a unique design element. ★Buttresses are a trendy aerodynamic item at present, and the Super Avante is endowed with its own polycarbonate design, a separate part.   ★Left: Two different wing stay designs (high and low) are included in the kit, to help you tweak the car's downforce. ★Right: Vibrant yellow star dish design wheels are paired with high grip square spike tires for superior off-roading.   TD4 - Low Profile, High Performance The TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance. The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment. Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.   ★The shaft-driven 4WD chassis makes a major contribution to the model's low profile, and is a highly slimline deisgn to boot. ★Take a closer look at the front double-wishbone setup with lower "H" arms, and turnbuckle upper arms that allow easy camber tweaks. ★Rocker arms and push-rods are used to actuate the front inboard CVA oil dampers, which are near-horizontal (10 degrees) in their position.   ★The TD4 chassis has its motor in a midship position, and ducts are worked into the design to ensure that it is cooled as much as possible. ★This picture is a close-up on the TD4's propeller shaft, which runs along the side of the chassis to provide the front wheels with power. ★Both front and rear gearboxes are sealed, and contain one of these - a ball differential. Steel joints contribute to the model's durability.   ★Left: Like the front, the rear double wishbone suspension utilizes upper turnbuckle shaft and rear "H" arms. ★Right: Access to the battery pack is provided by the front suspension, which springs up dynamically.   Specifications ★Length: 387mm, width: 246mm, height: 117mm (with low wing stays employed) ★Wheelbase: 283mm　★Tread: 214mm (front), 205mm (rear) ★Plastic bathtub frame ★Shaft-driven 4WD ★Front & rear ball differentials ★3-piece steering tie-rod ★4- wheel double wishbone suspension ★Tire width/diameter: 32/82mm (front), 41/82mm (rear) ★CVA oil dampers ★Gear Ratio = 10.71:1 ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of August 7, 2021. Specifications are subject to change without notice.

Tamiya 58697 - 1/10 Astute 2022 TD2 Kit Nødvendig tilbehør: 1 x servo (må være lavprofil servo) Kan anbefale denne DS8570 Radio/Motaker Batteri/Lader Ønsket lexanlakk PS Motor og Regulator(ESC) Virkelig fantastisk! Denne 2WD R/C offroad-byggy byggesettet arver navnet sitt fra Tamiya 2WD modell «Astute» fra 1980-tallet. Det lavprofilerte, slanke karosseriet er designet av Kota Nezu fra znug design. Modellen har en førerfigur i cockpiten og individuelle små skjermer foran/bak. To typer (høy/lav) vingestag er inkludert for å justere nedtrykket. Astute 2022 er basert på et monocoque-rammechassis med midskipsmotor og batteripakke plassert bakover, og bruker ribbede dekk foran og firkantede pigger bak. TD2 er et bakhjulsdrevet buggychassis som bruker innvendig frontfjæring for slank, lavprofilform, og en monocoque-ramme med optimal plassering av R/C-utstyr. Den har en tverrgående motor midtskips og tverrgående batteripakke plassert bak. Den forseglede girkassen har en innebygd kuledifferensial for å begrense slipp, og 4-hjuls uavhengig dobbel wishbone-fjæring bruker CVA-oljedempere. Strammeskruer for bruk som overarmer forenkler justering av cambervinkel. Forhjulsopphenget har en glidevinkel på 25 grader og vinklede dempere for jevn ytelse. Ribbede firkantede piggdekk foran og bak gir stabilitet og godt grep. Forhjulene er festet med sekskantnav. Spesifikasjoner : Lengde: 387 mm, bredde: 246 mm, høyde: 125 mm (med lave vingestag) ★ Akselavstand: 284 mm ★ Mønster: 215 mm (foran), 205 mm (bak) ★ Plastramme for badekar ★ Bakhjulsdrift ★ Kuledifferensial ★ 3-delt styrestag ★ 4-hjuls dobbel wishbone-fjæring ★ Dekkbredde/diameter: 27/79 mm (foran), 41/82 mm (bak) ★ CVA-oljedempere ★ Girforhold = 10,71:1 ★ Fulle kulelagre ★ Type 540-motor og elektronisk hastighetskontroller (ESC) selges separat. Separat nødvendige varer ★Motor type 540 ★2-kanals fjernstyrt system med ESC ★R6/AA/UM3-batterier for sender ★Batteripakke og lader ★Take a look at the Astute 2022 body from another angle, drinking in the honed form with splayed rear, designed by Kota Nezu. ★The TD2 layout has the motor installed midships, while the battery pack in a position toward the rear to aid with traction. ★A hi-torque servo saver comes included as standard, and helps actuate the steering via a three-piece tie-rod setup. ★Smooth front inboard suspension has suspension arms with a 25-degree skid angle and CVA oil dampers at a similar gradient. ★Upper "I" and lower "H" arms are employed in the front suspension. Turnbuckle shaft upper arms allow swift adjustment of camber. ★Black star dish design wheels are paired with sturdy hex hub nuts and front ribbed tires for superior directionality. ★The motor is attached in a transverse position to the rear of the battery pack, providing power to a drivetrain with 3 gears. ★A ball differential is housed in the sealed gearbox. Steel joint cups secure the durability needed for a demanding off-road drive. ★CVA oil dampers have red springs in keeping with the livery theme of the stylish Astute 2022. ★The rear suspension setup features a combination of lower "H" arms and upper turnbuckle shafts. ★At the rear, black star dish wheels are used in combination with square spike tires to give the model plenty of bite. ★Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders. ★The cockpit is a particular highlight, with an aircraft-inspired canopy and a driver figure installed inside for superb realism. ★Two different wing stay designs (high and low) are included in the kit, to help you tweak the car's downforce. This image shows low types. Front polycarbonate mini-fenders are screw-attached to their upright. Blue sections are taken care of with stickers. If you like, side pontoon front sections can be left unpainted to provide a window into the car's inner workings!

Tamiya 58701 1/10 1995 Opel Calibra V6 Cliff TT-01E 4WD KIT (NO ESC)  Leveres med torque tuned motor. Byggesett av Opel Calibra , du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS)  Regulator : Vi anbefaler Hobbywing 1060   Se anbefalt tilbehør under relaterte produkter. Length: 448mm. Image shows painted and assembled kit.   A Fine Vintage The cars in the 1995 German DTM touring car series were finely honed beasts, battling it out over twenty-four races in six countries. Opel, Mercedes-Benz and Audi cars took part; six Opels from two teams took to the track, including this Calibra V6 clad in a striking black livery bearing the name of title sponsor Cliff, and piloted by JJ Lehto. This R/C model assembly kit depicts the car in style, with the two-door coupe body molded in lightweight polycarbonate and stickers included to recreate markings.   ★Left: This image gives a close-up on the stylish silver color dish wheels and slicks, housed under the distinctive fenders. ★Right: Separate injection molded plastic parts depict the side mirror (stickers are used for mirror surface) and wiper.   ★Left: The front of the full-size car had a complex design for cooling and downforce, realistically depicted by this model in scale. ★Right: The dynamic combination of large rear wing and long stays is a one-piece depiction. Stickers recreate the Opel logo and more.   Evolved Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a three-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Silver dish wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!   ★Left: Dedicated TT-01 Type-E upright designs offer excellent reliability and fit that translates into a great, long-lasting drive. ★Right: A three-piece steering tie rod setup employs aluminum pipes for superior parts fit and smooth steering motion.   ★Left: This image shows an example of how drivers in R/C races can use the included transponder stay when setting up their car. ★Right: Damper stay and gear cover are separate parts; the stay features two different damper attachment holes to choose from.   Specifications ★Length:448mm, width: 185mm, height: 128mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm ★Bathtub type chassis frame ★Longitudinally-mounted motor, shaft-driven 4WD ★Front & rear 3-bevel differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front & rear friction dampers ★Gear ratio = 8.35:1 ★Type 540 motor ★Requires an Electronic Speed Controller (sold separately)   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of March 3, 2022. Specifications are subject to change without notice.  

Tamiya 58703 - TOM’S GR Supra (TT-02) 4WD Kit  Dramatic Champion Dette byggesettet gjenskaper au TOMs GR Supra som gjorde et forbløffende comeback for å ta Super GT-serien GT500 klassemesterskapet med seier fra fjerde plass på banen i sesongavslutningsløpet på Fuji.  Karosseriet i polykarbonat fanger på en kunstig måte bilens form, inkludert svulmende overskjermer og komplekse sideseksjoner, med separate polykarbonat-kanarder og lyskasser, pluss ABS-speil og sidespeil. Byggesett av Tamiya 58703 Toyota Supra (TT-02) 4WD, du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Regulator (Vi kan anbefale denne HW1060) Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri  lakk (PS)   Se anbefalt tilbehør under relaterte produkter.   Spesifikasjoner: RC byggesett Chassis type: TT-02 Skala: 1/10 Lengde: 46,6 cm Bredde: 18,8 cm Høyde: 12,5 cm Terreng: On-road Drift: 4WD firehjulsdrift Batteripakke: 7,2V Ni-Mh eller en 7.4V Lipo pakke (Round case) med Tamiya-kontakt (ikke inkludert) Motor: Torque-Tuned 540 Børstemotor (inkludert) Body: Ulakkert polykarbonat (lakk/maling ikke inkludert) Lakk/maling anbefalt av Tamiya: PS-1 White PS-5 Black PS-31 Smoke PS-62 Pure Orange TS-29 Semi Gloss Black TS-98 Pure Orange TS-101 Base White Info fra Tamiya: ★Take a look at the rear of the model, the powerful GT car form unerringly captured by the kit's polycarbonate body. ★Headlight cases and dual canards on each side of the nose are separately molded polycarbonate parts for even more detail. ★Side mirrors are molded separately in plastic, and are dedicated parts developed for this model.   ★Left: Complex side sections with "lateral duct" detailing are depicted in style. ★Right: The rear of the body features a distinctive flat trunk and racy diffuser.   ★Left: The rear wing is recreated by a single part molded in ABS plastic. ★Right: 12-spoke wheels are molded in gun metal color, and paired with racing slicks.   TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 12-spoke wheels use slick tires.   ★Left: Resin ball links in the steering linkage joints make for smooth, comfortable motion. ★Right: Wheel hubs are shaped to look like brake discs.   ★Left: Motor cover includes removable cooling duct (not attached in image). ★Right: This image gives a closer look at the rear double-wishbone suspension with friction dampers.   Specifications ★Length: 466mm, width: 188mm, height: 125mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of September 14, 2022. Specifications are subject to change without notice.

Tamiya 58705 1/10 Ford Bronco 2021 CC-02 4WD Kit CC-02 byggesett av Ford Bronco 2021, du trenger i tillegg for å få komplett bil, regulator/radio/motaker/servo, batteri og lader, lexan lakk. Tamiya er stolt over å kunngjøre lanseringen av Ford Bronco 2021 som den nye R/C-modellen CC-02 chassis. Ford Bronco har blitt solgt siden 1966, og Ford Bronco 2021 ble annonsert som sjette generasjons modell i 2021, 25 år siden siste generasjons utgivelse. Denne bilen bruker en 2,3-liters rekke 4 motor (standard) eller 2,7-liters V6-motor (ekstrautstyr). Modellen viser den første utgaven av 2-dørstypen. Om modellen • Dette er et byggesett i skala 1/10. Lengde: 447mm, bredde: 204mm, høyde: 233mm Akselavstand: 252 mm (*1). • Den lette, slitesterke 1,2 mm tykke polykarbonatkroppen fanger realistisk den karakteristiske formen med runde frontlykter, hevede linjer på forskjermer, og avlange baklykter i stil med originalen. • Har PC-ABS hardplast deler (gitter, speil, reservedekkdeksel og dørhåndtak) og metallbelagte K-deler (lette saker). • PC-ABS takstativdelen er inkludert som standard del for å gi modellen et kraftig off-road utseende. • CC-02-chassiset har stigeramme som er inspirert av kjøretøy i full størrelse, gir både stivhet og kult utseende, og gir stabil ytelse selv på vanskelige steinete veier og grusveier. (*1: Bruken av M-størrelse akselavstand med CC-02-chassiset er første gang.) • 12-eikers sorte hjul (bredde: 26 mm, forskyvning: +6) (*2) er sammenkoblet med semi-pneumatiske gummidekk. Leveres med ledlyssett  Kulelager om man ønsker å oppgradere:  2 x 5x8x2.5mm (850) 16 x 5x11x4mm (1150) Alternativ 54579 pakke a 16 stk 2 x 6x12x4mm (1260) 2 x 10x15x4mm (1510) Mine's a Bronco! This R/C model assembly kit depicts a 2-door model of the Ford Bronco 2021, and features a realistic polycarbonate body that artfully depicts the car, with classic Bronco features such as the rounded headlights, oblong taillights and front fender-top indentations. Also included are separate parts for recreating a roof rack, the front grille, mirrors, spare tire covers and more. Front and rear light cases are plated parts, and can be fitted with separately sold LEDs.   ★The stylish form with firm Bronco roots is accurately captured in polycarbonate. ★The front grille is a separately molded part and features accurate renderings of the rounded headlights. ★Dedicated, separately molded plastic parts are used to depict the Bronco's boxy side mirror designs.   ★Separately molded components to recreate door handles give the model another layer of realism. ★The molded plastic roof rack will make sure that your Bronco looks the part off-road! ★The tire cover can be decorated with the included stickers. Taillight shapes also catch the eye.   ★Left: Twelve-spoke wheels are molded in black for an authentic look, and are paired in this kit with block pattern tires. ★Right: This image shows off the model's plentiful ground clearance, which helps it take on tough off-road obstacles.   CC-02 Chassis - Off Road, Evolved Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with black twelve-spoke wheels and grippy block pattern tires.   ★Left: The ladder frame is modeled upon those employed by full-size cars, and offers excellent rigidity on this 1/10 scale vehicle. ★Right: The motor is mounted in the chassis front-middle; power goes via gearbox and propeller shafts to front and rear axles.   ★Left: Both front and rear ends of the CC-02 chassis utilize 4-link rigid setups with shock absorption provided by CVA oil dampers. ★Right: Axle housings are molded in reinforced plastic, and house 3-bevel differentials. They can be locked when running on lower-grip surfaces.   Specifications ★Length: 447mm, width: 204mm, height: 233mm ★Wheelbase: 252mm　★Tread: 164mm (front), 167mm (rear) ★Tire width/diameter: 36/94mm (front & rear) ★Ladder frame ★Longitudinal motor, shaft-driven 4WD ★3-bevel differential gears ★4-link rigid suspension (front & rear) ★Gear ratio = 17.33:1 (using kit-standard 16T pinion) ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of May 26, 2022. Specifications are subject to change without notice.

Tamiya 58706 - Thunder Shot 2022 Re-Released 1/10 4WD Kit Svært tiltalende re-realeaset modell fra Tamiya Dette byggesettet er en gjenutgitt og oppdatert versjon av Thunder Shot, hvor originalen først ble utgitt i 1987. Den har ett stilig karosseri støpt i polykarbonat, som er ferdigkuttet og ferdigmalt i hvitt og blå, med en gjennomsiktig canopy. En valgfri bakvinge er også inkludert for å la deg finjustere Thunder Shot (2022), også ferdigmalt og ferdigkuttet. Akseldrevet 4WD Med et motoroppsett midtskips og akseldrevet 4WD-oppsett, er chassiset basert rundt en lett og stiv ABS-plastramme som oppbevarer R/C-utstyr internt og har girkasseenheter med intern differensial foran og bak som har fjæringen festet til seg. Den firehjuls doble bærearmsfjæringen har øvre "I" og nedre "H"-armer og har en enkelt CVA-oljedemper foran, med et par dempere bak, pluss en frontstabilisator: Resultatet er en jevn, flytende kjøring. Andre viktige funksjoner inkluderer et motorfeste i aluminium, pluss grippy piggdekk på alle fire hjul. Option : 17stk x 1150 (5x11x4mm Kulelager)  4 stk x 850  (5x8x2.5mm Kulelager) Nødvendig tilbehør:  Radio/motaker  Regulator (ESC) Vi kan anbefale HW Quicrun 1060 Drivbatteri (rundkasse) og Lader til dette Thunder Shot (2022) Item No: 58706 Length: 390mm. Image shows painted and assembled kit.   Highly Appealing This R/C model assembly kit is a re-released and updated version of Thunder Shot, the original of which was first released in 1987. It features a stylish body molded in polycarbonate, which is pre-cut and pre-painted in white and blue, with a transparent canopy. An optional rear wing is also included to let you fine-tune the Thunder Shot (2022), also pre-painted and pre-cut.   Smooth Shaft-Driven 4WD With a midship motor layout and shaft-driven 4WD setup, the chassis is based around a lightweight and rigid ABS plastic frame that stows R/C equipment internally and features gearbox units with internal differential front and rear that have the suspension attached to them. That four-wheel double wishbone suspension features upper "I" and lower "H" arms and packs a single CVA oil damper at the front, with a pair at the rear, plus a front stabilizer: the result is a smooth, flowing drive. Other features of note include an aluminum motor mount, plus grippy spike tires on all four corners.   ★The compact, futuristic body is molded in lightweight and durable polycarbonate. ★Sturdy and easy to work on, the chassis has an ergonomic design based around an ABS bathtub. ★The front double-wishbone suspension employs upper "I" and lower "H" arms.   ★A front monoshock setup sees the CVA oil damper laid on its side. The stabilizer helps supress roll. ★An aluminum motor mount not only keeps the motor securely attached, it also acts as a heat sink. ★The rear of the chassis also uses double-wishbone suspension, with a pair of CVA oil dampers.   ★One-piece dish wheels will attract less mud, and are paired with semi-pneumatic spike tires. ★A polycarbonate cover helps minimize debris getting into the chassis, and even features a driver figure! ★A separate rear wing is also included for optional attachment to the Thunder Shot (2022).   Specifications ★Length: 390mm, width: 240mm, height: 135mm ★Wheelbase: 260mm ★Ground clearance: 23mm ★Tread: 203mm (front), 194mm (rear) ★Tire width/diameter: 38/83mm (front/rear) ★Bathtub type frame ★Shaft-driven 4WD ★Front/rear 3-bevel differentials ★3-piece steering tie-rod ★Front/rear independent double wishbone suspension ★Gear ratio = 7.68:1 ★Type 540 motor ★Electronic speed controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of April 21, 2022. Specifications are subject to change without notice.

Tamiya 58710 -  Hotshot II Blockhead Motors KIT Nødvendig tilbehør: 1 x servo  Regulator (ESC) Radio/Motaker Batteri/Lader Ønsket lexanlakk PS   Customized Hotshot II The Hotshot II debuted in 1987, a follow up to the Hotshot, our wildly popular first-ever shaft driven 4WD buggy. Now, the Hotshot II makes a re-appearance with various tweaks added by the famous Japanese designer Mr. Jun Watanabe. It features an overhauled color scheme of brilliant blue (body and wing are pre-painted in this color, and pre-cut), with a prominent white stripe. The driver figure position has also been reevaluated, while the upper deck and roll cage are new components, bringing the driver up to a more realistic location. Guards and car number plates were also designed by Watanabe, while the motor has a dedicated sticker.   Shaft Driven 4WD Chassis Based upon the original Hotshot II design, this shaft driven 4WD chassis has sealed gearboxes and differentials front and rear and gives an intuitive drive. The front of the four-wheel double wishbone suspension employs a monoshock setup, with two dampers at the rear (all are CVA oil dampers molded in yellow), while metal plated parts such as uprights and wheels give the model a realistic look. The latter are shod with hybrid oval block/pin spike low-profile tires.   ★The model viewed from behind, complete with the rear guide designed by Watanabe. ★Matte plated front uprights give the model a classy accent. ★The front monoshock CVA oil damper is molded in yellow and joined by a stabilizer.   ★The driver figure has a slightly raised position, and is surrounded by a roll cage with window netting. ★Crafted in metal, the roof-top includes an air intake, while guard plates are installed to the front and rear of the cockpit. ★Car number plates add another customized touch to this model.   ★Rear uprights have a matte plated finish. ★CVA oil dampers are used on the rear, their tension being adjustable via spacers. ★Matte plated wheels are paired with semi-pneumatic hybrid tread tires.   ★This kit also includes a polycarbonate rear wing, with lots of stickers to decorate it.   Specifications ★Length: 390 mm, width: 235 mm, height: 150 mm ★Weight: 1,285 g ★Tread: 205 mm (front), 200 mm (rear) ★Tire width/diameter: 31/88 mm (front), 38/88 mm (rear) ★ABS monocoque ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel double wishbone suspension ★Gear ratio = 8.70:1 ★Type 540 motor (with dedicated sticker) ★Electronic speed controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of February 2, 2023. Specifications are subject to change without notice.

Tamiya 58712- 1/10 Porsche 911 GT3 (992) (TT-02) Kit  Byggesett av Porsche 911 GT3 (992) (TT-02), du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Regulator (Kan anbefale denne HW1060 ) Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) Tamiya gjenskaper her Porsche 911 GT3 (992) med et fantastisk og svært detaljert lexan karosseri. Settet er basert på det nybegynnervennlige og svært tilpassbare TT-02-chassiset. Den syvende generasjonsmodellen i full størrelse, Porsche 911 GT3, har forstilling med doble bærearmer – endret fra MacPherson fjærben – og en horisontalt motsatt 6-sylindret motor. Lette komponenter og aerodynamisk design har forbedret ytelsen betydelig. Karbonfiberforsterket frontdeksel i plast, som ble brukt til produksjonskjøretøyer for første gang, gir lett design. Spoiler feste, av hengende type gir også større nedkraft og lavere luftmotstand. Tilpassbart TT-02-chassis tilbyr balansert akseldrevet 4WD Det akseldrevne 4WD TT-02-chassiset har en langsgående layout med batteriet til venstre og motoren til høyre, for å gi utmerket stabilitet. I tillegg har den identiske venstre og høyre opphengsarmer og hjulnav for enkel montering, pluss girkasse som er enkle å vedlikeholde. Det er et svært tilpasningsdyktig chassis, siden det tilbyr 2 forskjellige akselavstander, 2 bakkeklaringsinnstillinger og 2 hjul stillings oppsett i tillegg til 10 forskjellige utvekslings forhold. Den har også ett flott  og skal riktig utseende, med bremseskiveformede hjulnav og stilig støtfangerstøtter foran. Mesh-type hjul er sammen med racing slick dekk. Se anbefalt tilbehør under relaterte produkter. Disse fargene er det referert til i manualen, for å få modellen til å se ut slik Tamiya har designet den. PS-5 PS-30 PS-31 TS-29 TS-44 Det anbefales kulelagere til modellen, 54476. eller Med olje fra Yeah Racing  

Tamiya 58714 Volkswagen Golf II GTI 16V Rally 1/10 (MF-01X KIT)  Nødvendig tilbehør: Radio/Motaker, Regulator (ESC) Batteri/Lader/Servo/PS- Lakk (Se relaterte produkter for vår anbefaling) Nok ett ikon fra Tamiya! (Bilde viser ferdigmontert og lakkert bil) Golf er en av Volkswagens mest ikoniske biler. Fra den første opptredenen i 1974 har Volkswagen Golf fortsatt å utvikle og lede den verdensomspennende kompaktbilklassen, samtidig som den deltar aktivt i motorsport. Andregenerasjonsmodellen - resultatet av et fullstendig modellskifte i 1983 - hadde en GTi-sportsmodell med en 1781cc inline-4-motor. Dette byggesettet etterligner den bilen som møtte suksess i globale rallyløp i 1986 og ble mester i sin klasse. Den har et lett og slitesterkt karosseri i polykarbonat (lexan), sammen med MF-01X-chassiset som har ett akseldrevet 4WD chassis gjør den anvendelig til en flott kjøretur på vei og flatt grusunderlag. 1980 -tallet var tiåret som det ble populært igjen med såkalte hatch back ! En av de mange bilprodusentene som gjorde hatchbacks populære var Volkswagen, og deres MK2 GTI 16V var en favoritt blant mange bilfans. Tamiya har gjenskapt MK2 GTI som en rally -bil som sett i A7 - klasse.    ★The classic lines of the Golf II are rendered artfully by the polycarbonate body. ★Headlight cases and spotlights are separately molded parts that are compatible with separately sold LED light unit. ★Dedicated parts recreate the distinctive side mirrors, and stickers are used for the mirror surfaces.   ★Left: Taillight cases are separate parts, and can be combined with separately sold LED light unit. The bumper is also a separate component. ★Right: Dish wheels are paired with rally block tires.   MF-01X - Compact 4WD At Home on a Range of Surfaces Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and 8-spoke wheels are paired with rally block tires.   ★Left: A close-up on the double wishbone front suspension. Uprights and hub carriers are off-road spec. ★Right: A slimline three-piece monocoque forms the centerpiece of the MF-01X chassis, and the propeller shaft is positioned to the right.   ★Left: The motor is planted in the 4WD chassis' rear, with power going via gears to the rear wheels and propeller shaft to the front. ★Right: This image shows the double wishbone rear suspension with its coil sprung dampers.   Specifications ★Length: 397mm, width: 170mm, height: 142mm ★Wheelbase: 239mm (L) ★Tire width/diameter (front & rear): 26/60mm ★Tread (front & rear): 138mm ★Monocoque frame ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel double wishbone suspension ★Front & rear friction dampers ★Gear ratio = 9.5:1 ★Type 540 motor ★Electronic Speed Controller (sold separately)   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of August 29, 2023. Specifications are subject to change without notice.  

Tamiya 58718 - TT-02 Toyota Celica GT-Four (ST165) 4WD  Dette byggesettet gjenskaper Toyota Celica GT-Four (ST165) med et fantastisk og svært detaljert polykarbonat karosseri. Settet er basert på den nybegynnervennlige og svært tilpassbare TT-02-chassiset, som er beregnet på asfalt og flate grusbaner for morsom rally med masse action! TT-02-chassis med axeldrevet 4WD Aksel drevet 4WD TT-02-chassis bruker en langsgående utforming med batteriet til venstre og motoren til høyre, for å tilby utmerket stabilitet. I tillegg har den identiske venstre og høyre suspensjonsarmer og stag for enkel montering, pluss lett å vedlikeholde. Det er et meget tilpasningsdyktig chassis, ettersom det er mulig å bygge bilen med 2 forskjellige akselavstander, 2 bakkeklaringer og 2 vinkel oppsett i tillegg til 10 mulige girforhold. Det er heller ikke holdt tilbake på utseende, med bremseskiveformede hjulnav og stilige støtfangerstøtter foran. • 1/10 skala R/C modellmonteringssett. Lengde: 450mm, bredde: 185mm, høyde: 130mm. Axelavstand: 257mm. • Lett, holdbar 1,0 mm tykk polykarbonatlegeme. • Kittet er basert på det axeldrevne 4WD TT-02-chassiset som gir stor tilpasningsevne med forskjellige typer oppsett. • Rally Dish -hjul støpt i hvitt og med racingdekk med slitebaner som på racing. • Leveres med klistremerker og vindusmaskeringstape for bruk i malingsprosessen. • Inkluderer motor. • Krever 2-kanals radio, styresservo, ESC, 7.2-7.4Volt-batteri med kompatibel lader og Tamiya PS-maling for å fullføre. Du trenger i tillegg til kitet for å få det komplett: 1 x servo anbefalt minst 6.5kg Radio/Motaker Regulator vi kan anbefale HW1060 , alternativ Tamiyakontakt HW1060 Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS) Anbefalt kulelagersett : 54476 (Alternativ løse lager 4stk 1280 8x12x3.5 , 4stk 1150 5x11x4 , 8stk 1050 5x10x4 )   Se anbefalt tilbehør under relaterte produkter. Toyota Celica GT-Four (ST165) (TT-02) Item No: 58718 Length: 450mm. Image shows painted and assembled kit.   ★A triumphant return on the TT-02 chassis for this subject, which depicts the Celica GT-FOUR that graced Japanese domestic rallies in the 1990 season. ★The flowing lines of the car are depicted artfully by the polycarbonate body. ★The TT-02 chassis offers highly controllable shaft-driven 4WD. ★Dish wheels are paired with racing radial tires. Information is current as of March 3, 2023. Specifications are subject to change without notice.  

Tamiya 58719 - BB01 BBX 2WD 1/10 Offroad Buggy Kit  BBX er en ny off-road buggy på det splitter nye BB-01 chassiet fra Tamiya. Karosseriet er designet av Atsushi Arino i 1980-talls stil og kommer med matchende retro hjul. Kommer som byggesett. Nødvendig tilbehør: Radio-Motaker Servo 4.8 -9.8kg (Lavprofil) Regulator (ESC) Vi kan anbefale denne ( HW1060 ) Motor  Batteri og egnet lader for batteri, kan bruke både Nimh eller 2S Lipo/Liion PS Lakk for Lexankarosseriet X-XF maling for detaljer og sjåfør Det anbefales å sette inn kulelagere. Om modellen BBX er Tamiyas nyeste bakhjulsdrevne buggy, en nydelig modell inspirert av Stateside enseters racingbuggyer i full størrelse. Den er basert på det realistiske BB-01-chassiset, som har et chassis med flat underside, montert ett rullebur, ramme og oppheng; batteripakken er i langsgående posisjon, og motoren er plassert helt bakerst, noe som gir den trekkraften til hjulene en hjelpende hånd. Den forseglede girkassen inneholder en kuledifferensial, mens fire aluminium oljedempere sørger for eksemplarisk ytelse og fjæring. Tamiyas designere valgte fremre doble bærearm (A-armer, 25-graders hjul) og bakre trailingarm justerbart oppsett for fjæringen, og det stilige karosseriet er delt opp i seks biter for montering på rørburet.  Lengde:    414mm Høyde :    136mm Bredde :   233mm Hjulbase:  283mm     ★Take a look at the chassis without the body fitted, showing off the highly realistic roll cage. ★Plated wheels are a hex hub design, and are paired with front ribbed and rear square spike tires. ★Front double-wishbone suspension uses A arms with 25 degrees of caster, and cushioned by oil dampers.   ★The motor is positioned at the rear of the BB-01 chassis. Rear trailing arm suspension alignment is adjustable. ★The battery pack is located along the chassis centerline. Remove the nose cowl and stopper pin to access it. ★A busy and realistic cockpit area features a driver figure, light pods and safety nets.   ★Left: Remove the rear roll cage screws and it swings up to give access to the motor. ★Right: The BB-01 chassis offers great suspension stroke and tread, making it the perfect off road partner.   ★Left: A flat underbelly helps minimize problems with rough off road surfaces. ★Right: Why not buy a separately sold spare tire and fit it on the rear when you're not driving the BBX? Information is current as of May 15, 2023. Specifications are subject to change without notice.

Tamiya 58721 - Fiat Abarth 1000 TCR Berlina Corse 1/10 (MB-01 KIT) Flotte ting kommer i små pakker! Her kan du velge om du vil ha forhjulstrekk eller bakhjulstrekk! Fiat Abarth 1000 TCR Berlina Corse ble klassemester i Europa Touring Car Championship i 1968 og 1969. Basert på den kompakte 2-dørs Fiat 600, ble den tunet av Abarth for løp. Den muskuløse formen foran og bak over skjermer, et stort radiatordeksel integrert med støtfangeren foran, og horisontalt åpnet motordeksel. En 982cc inline-4-motor med en kraft på over 110 hk underbygget dens kraftige ytelse. Dette byggesettet skildrer den lille, men mektige silhuetten av bilen elegant ved hjelp av et karosseri i polykarbonat (lexan) og massevis av separat støpte plastdeler, hele pakken er basert på det nye MB-01-chassiset. Nødvendig tilbehør:  Radio/Motaker Batteri/Lader Servo Regulator (ESC) Lakk til lexan (PS) TS lakk til hardplastdeler og eventuell X-XF maling for detaljer Det kompakte 2WD MB-01-chassiset gir et valg mellom tre typer akselavstand og for- eller bakhjulsdriftssystem. Abarth bruker en midtstillt motor med bakhjulsdrift. Uten å fjerne batteripakken, motoren og elektronikk fra midtrammen, kan du ganske enkelt endre drivretning til akslingene og styreoverføring for å bytte mellom for- og bakhjulsdrift, lav eller høy motorstilling kan velges for bakhjulsdrevne biler. Den 4-hjuls doble bærearmsfjæringen har symmetrisk struktur og friksjonsdempere. Samlede seksjoner som motorfeste, akslinger og fjæring forenkler montering og effektivt vedlikehold. Opprinnelsen til M-Chassis-serienes historie går tilbake til desember 1994, og denne serien har vært populær på grunn av kostnadseffektive sett med et bredt utvalg av karosserier, enkelt vedlikehold og passer godt alle nivåer av sjåfører. M-05 er etterfulgt nå av MB-01 Det nye MB-01-chassiset fortsetter den tradisjonen og tillater seks oppsett ved å velge fra tre typer akselavstand, og bak- eller bakhjulstrekksystem. Det første valget gjenskaper Fiat Abrh 1000 TCR Berlina Corse, som var en bil utviklet med høye tune ups basert på den kompakte 2-dørs Fiat 600. Options :  Kulelager :   2 x (1280) 8x12x3.5mm 12 x (1050) 5x10x4mm  (Gummiforseglet)   4 x (850) 5x8x2.5mm The MB-01 Chassis The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.   ★The compact MB-01 chassis. For this model, it is assembled with a short wheelbase: 210mm. ★The servo is installed in the right-rear of the model, and moves the steering linkage via a link rod. ★The four-wheel double wishbone suspension uses symmetrical arms.   ★Coil sprung dampers come as standard, although you can upgrade them with M-Chassis aluminum dampers if you wish. ★The motor mount is assembled as a unit, and secured to the chassis using two screws. ★The 4-bevel gear differential is the same as that on the TT-02; this chassis is compatible with TT-02 Hop-Up Option differentials.   ★Left: The flip-up battery holder gives quick access. ★Right: Rear double wishbone suspension gives a stable drive.   ★Left: Suspension elements are also unitized to help with pit and repair work. ★Right: This versatile chassis can be assembled into three wheelbases and two drivetrain layouts.   Specifications ★Length: 374mm, width: 168mm, height: 140mm ★Wheelbase: 210mm (Short) ★Tread: 140mm (front & rear) ★Tire width/diameter: 25/55mm (front), 25/59mm (rear) ★Bathtub type chassis ★Midship motor, rear-wheel drive ★4-bevel differential gear ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Friction dampers ★Gear ratio = 5.83:1 (using kit 29T pinion) ★Type 540 motor ★Electronic speed controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger Information is current as of August 24, 2023. Specifications are subject to change without notice.

Tamiya 58723 1/10 Fiat 131 Abarth Rally Olio Fiat - MF-01X Kit Nødvendig tilbehør: Radio/Motaker, Regulator, Batteri/Lader/Servo/PS- Lakk (Se relaterte produkter for vår anbefaling eller kontakt oss på post@rc-shop.no) Rallystjerne fra 70-tallet Fiat 131 Abarth Rally debuterte i globale rallyløp i 1976 og ble mester tre ganger. Basert på den populære Fiat-familiebilen 131 Mirafiori, ble rallyversjonen tilpasset av Abarth og i 1976 og 1977 kjørte den hovedsakelig i fargen til Fiat-oljemerket Olio Fiat: dette byggesettet skaper en R/C-modell av den bilen. Den forlokkende formen til bilen gjenskapes ved hjelp av et karosseri i polykarbonat/lexan, med separate deler for firedoble frontlykter, ekstralykter og bakrutespoiler.   ★Denne klassiske rallybilen passer perfekt til det svært kapable MF-01X-chassiset. ★Et nærbilde foran på bilen, som har separate deler for frontlykter og ekstralykter. ★Sidespeil er også separate plastdeler, mens førernavn er inkludert på klistremerkearket.   ★ Venstre: Den støtfangerløse bakdelen er et punkt av interesse, og bagasjelokkspoileren er en separat støpt komponent. ★Til høyre: Her ser du nærmere på takspoileren, som også er støpt separat fra karosseriet.   ★Venstre: De tykke overskjermene er et viktig element til bilens image, og luftinntaksdekselet er også avbildet. ★Høyre: Dish-hjulene er sammenkoblet med rallyblokkdekk med en diameter på 60 mm og en bredde på 26 mm.   MF-01X - Kompakt 4WD hjemme på en rekke overflater Basert rundt en tøff monocoque-ramme med integrerte differensialer gir dette kompakte 4WD-chassiset en spennende kjøretur enten du tar den på vei eller flate jordoverflater. Den har en bakmontert motor, med differensialdrevene hjul og en mellomaksel som overfører driv til fronten. Både fremre og bakre differensial har differensialgir. Batteripakkens plassering i chassissenteret sikrer utmerket balanse, mens 4-hjuls uavhengig dobbel bærearmfjæring bruker friksjonsdempere. Offroad-kompatible M-05Ra-karosseristolper og svingaremer er også inkludert, leveres med dishfelger sammen med med rallyblokkdekk.   ★Venstre: Motoren er plassert bak på 4WD-chassiset, med kraft som går via differensialer til hjulene og mellomaksel overfører kraften til foran. ★Høyre: En slank tredelt monocoque utgjør midtpunktet i MF-01X-chassiset, og mellomakselen er plassert til høyre.   ★ Venstre: Et nærbilde av den doble bærearmsfjæringen foran. C-Huber og svingarmer er off-road-spesifikasjoner. ★Høyre: Dette bildet viser den doble bærearmsfjæringen med spiralfjærende dempere.   Spesifikasjoner ★ Lengde: 400 mm, bredde: 180 mm, høyde: 132 mm ★ Akselavstand: 239 mm (L) ★ Dekkbredde/diameter (foran og bak): 26/60 mm ★Senter på hjul (foran og bak): 138 mm ★ Monocoque-ramme ★ Akseldrevet 4WD ★3-bevel differensialgir ★2-delt styrestag ★4-hjuls dobbelt bærearmfjæring ★Front og bak friksjonsdempere ★Girforhold = 9,5:1 ★Type 540 motor Torque Tuned   Nødvendige tilbehør ★2-kanals R/C-system m/ESC ★Batteripakke og lader★Elektronisk hastighetskontroller (selges separat) Informasjon er gjeldende per 4. desember 2023. Spesifikasjoner kan endres uten varsel.  

Tamiya 58725 - 1/10  Squash Van GF-02 Kit  Tamiya lanserer her en ny terrengbil med store dekk. Navnet er Squash Van, og den er satt opp med et nytt girdrevet 4WD GF-02-chassis. Mens GF-01-chassiset har en komisk design, har GF-02-chassiset en mer realistisk akselavstand og en ramme med stige/rør konstruksjon. Dette byggesettet er inspirert av amerikanske panelvans fra 1950-tallet, og har en utmerkete egenskaper selv på gress eller ujevne overflater. Det girdrevne 4WD GF-02-chassiset har motoren i en lav, sentral posisjon i den lette, slitesterke monocoque-rammen, og overfører kraften foran og bak via drev. Den kan også settes opp for 4 hjuls styring med en ekstra servo og radio med 4WS program. Om du vil kulelager hele bilen har den 32stk 1150 (Pakke med 16stk 54579)(Løse lager (12156) og 2 stk 850 (12160) Pump opp de gode tidene! Dettebyggesettet er inspirert av amerikanske varebiler fra 1950-tallet. Den stilige karosseriet med avrundet panser, unik dekkhusform og lave frontlys- og grillposisjoner er støpt i lett og slitesterk polykarbonat. Klistremerker har design som squash-illustrasjoner, navnelogo og triple pin-striper i gull, svart og blått. Det girdrevne 4WD GF-02-chassiset bruker 4-hjuls dobbel bærearmsfjæring utstyrt med friksjonsdempere, og er utstyrt med dekk med en diameter på 123 mm, noe som sikrer kraftig ytelse på jordunderlag og terreng.   ★Vil retrostilingene til Squash Van fange oppmerksomheten din? ★ Et nærbilde av modellens front. ★ Svulmende fendere fremhever karosseriet sider, og klistremerker er inkludert for logoer og mer.   ★Dørhåndtak, nøkkelhull, bakre støtfanger og mer er gjenskapt av klistremerker. ★Hvite, dype felger og 123 mm dekk avrunder modellen, og sørger for at den er riktig hjemme i terrenget.     GF-02-chassis Det girdrevne 4WD GF-02-chassiset har motoren i en lav, sentral posisjon i den lette, slitesterke monocoque-rammen, og overfører kraft til front og bak via drev. Den lange akselavstanden og brede slitebanen sørger for stabil terrengytelse. Den slanke rammen er inspirert av stige/røroppsett og har integrerte forseglede girkasser som hjelper til med å holde steiner ute. Girdifferensialer foran og bak tillater jevn svinging, mens tannhjulsgir som selges separat tilbyr et valg mellom tre typer girutvekslinger, og et motorvern øker påliteligheten i terrenget. Den 4-hjuls doble bærearmsopphenget har fire friksjonsdempere, og styreleddet bruker identiske lengde styrestag. Dype felger i ett stykke er sammenkoblet med 123 mm halvpneumatiske dekk med stor diameter.   ★ GF-02-chassiets lange akselavstand og brede slitebane gir den suveren stabilitet. ★ Motoren er i en sentral posisjon, og kraften overføres via drev. Differensialer er installert foran og bak. ★ Styreservoen er installert på venstre side av chassiset, og er sammenkoblet med styrestag av samme lengde.   ★ Et nærbilde på frontfjæringen med dobbel bærearm med spiralfjærende dempere. ★ Baksiden er også et oppsett med dobbel bærearm. Skruehull for en annen servo (for 4WS-oppsett) er i chassiset.     Spesifikasjoner ★ Lengde: 454 mm, bredde: 280 mm, høyde: 238 mm ★ Akselavstand: 267 mm ★ Dekkbredde/diameter: 60/123 mm (foran og bak) ★ Slitebanen: 222 mm (foran og bak) ★ Monocoque-chassis med integrerte girkasser ★ Gear- 4WD ★3-fas differensialer ★2-delt styrestag ★4-hjuls uavhengig dobbelt bærearmfjæring ★Friksjonsdempere ★Girforhold = 18,03:1 ★Type 540 motor   Separat nødvendige elementer ★2-kanals R/C-system m/Servo ★Batteripakke og lader★Elektronisk hastighetsregulator (ESC) selges separat.   4-hjulsstyring (4WS) Sett sammen fjæringen igjen og bruk en separat solgt 4WS-radiosender, for 4-hjulsstyring og manøvrerbarheten og strammere svingsirkler som medfører. Informasjon er gjeldende per 4. desember 2023. Spesifikasjoner kan endres uten varsel.

Tamiya 58729 - Opel Kadett GT/E 1975 1/10 (MB-01) Kit (Inkl ESC THW-1060)  Flotte ting kommer i små pakker! Her kan du velge om du vil ha forhjulstrekk eller bakhjulstrekk! Opel Kadett GT/E ble utgitt i 1975 var en høyspesifisert versjon av Opel Kadett, en bil som nøt stor popularitet i Europa på 1970-tallet. GT/E hadde et 2-dørs coupé-karosseri, en høyspesifisert 1,9-liters motor og forsterket fjæring; fabrikkens Opel Eurohändler-team, satellitt-team og private deltok i rallyløp med modifiserte versjoner av denne bilen, og i 1976 sikret den andreplassen i produsentens mesterskap i globale rallyløp. Dette byggesettet  gjenskaper bilen i skala 1/10, med et karosseri i polykarbonat som fanger bilens klassiske linjer, basert på den kompakte 2WD-en til MB-01-chassiset. Nødvendig tilbehør:  Radio/Motaker Batteri/Lader Servo Lakk til lexan (PS) TS lakk til hardplastdeler og eventuell X-XF maling for detaljer Det kompakte 2WD MB-01-chassiset gir et valg mellom tre typer akselavstand og for- eller bakhjulsdriftssystem. Giulia bruker en midtstillt motor med bakhjulsdrift. Uten å fjerne batteripakken, motoren og elektronikk fra chassiset, kan du ganske enkelt endre drivretning til akslingene og styreoverføring for å bytte mellom for- og bakhjulsdrift, lav eller høy motorstilling kan velges for bakhjulsdrevne biler. Den 4-hjuls doble bærearmsfjæringen har symmetrisk struktur og friksjonsdempere. Samlede seksjoner som motorfeste, akslinger og fjæring forenkler montering og effektivt vedlikehold. Opprinnelsen til M-Chassis-serienes historie går tilbake til desember 1994, og denne serien har vært populær på grunn av kostnadseffektive sett med et bredt utvalg av karosserier, enkelt vedlikehold og passer godt alle nivåer av sjåfører. M-05 er etterfulgt nå av MB-01 Det nye MB-01-chassiset fortsetter den tradisjonen og tillater seks oppsett ved å velge fra tre typer akselavstand, og bak- eller bakhjulstrekksystem.  Options :  Kulelager :   2 x (1280) 8x12x3.5mm 12 x (1050) 5x10x4mm  (Gummiforseglet)   4 x (850) 5x8x2.5mm The MB-01 Chassis The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. Specifications ★Length: 417mm, width: 174mm, height: 138mm ★Wheelbase: 239mm (Long) ★Tread: 140mm (front & rear) ★Tire width/diameter: 25/59mm (front & rear) ★Bathtub type chassis ★Midship motor, rear-wheel drive ★4-bevel differential gear ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Friction dampers ★Gear ratio = 5.83:1 (using kit 29T pinion) ★Type 540 motor ★Electronic speed controller (ESC) is included. Take a look at the polycarbonate body from another angle, and see how it captures the elegantly sloped Kadett GT/E form. Quadruple fog lamps on the front are separate parts. Flat side mirrors are separate parts, with stickers for the mirror surfaces. The rear bumper is also a separately molded part. Rear combination lamps have PC-ABS light cases compatible with separately sold LEDs. Classical dish wheels are paired with treaded 60D radial tires. The compact MB-01 chassis. For this model, it is assembled with a long wheelbase: 239mm. The servo is installed in the right-rear of the model, and moves the steering linkage via a link rod. The four-wheel double wishbone suspension uses symmetrical arms. The motor mount is assembled as a unit, and secured to the chassis using two screws. The motor is installed in the left-rear, and provides power via propeller shaft. The 4-bevel gear differential is the same as that on the TT-02; this chassis is compatible with TT-02 Hop-Up Option differentials. The flip-up battery holder gives quick access. This versatile chassis can be assembled into three wheelbases and two drivetrain layouts.

Tamiya 58732 - Alfa Romeo Giulia Sprint GTA 1/10 (MB-01) Kit  Flotte ting kommer i små pakker! Her kan du velge om du vil ha forhjulstrekk eller bakhjulstrekk! Alfa Romeo Giulia Sprint GTA ble utviklet som den lette, tunede racerversjonen av 2-dørs coupe Giulia Sprint GT og utgitt i 1965. 500 enheter ble produsert og på slutten av 1960-tallet ble arbeidsbilen klassemester flere ganger i European Touring Bilmesterskap; også drevet av andre racingteam fanget det mange øyne på racerbanen. Dette byggesettet gjenskaper den klassiske bilen som en radiokontrollmodell, med et karosseri i polykarbonat pluss klistremerker for å lage et design inspirert av de mange klubbkjørerne drevet av amatørsjåfører. Denne modellen fanger den legendariske stilen med et lett polykarbonatkarosseri, basert på den kompakte 2WD-en til MB-01-chassiset. Nødvendig tilbehør:  Radio/Motaker Batteri/Lader Servo Regulator (ESC) Lakk til lexan (PS) TS lakk til hardplastdeler og eventuell X-XF maling for detaljer Enkel starterpakke med Radio/Motaker, Servo, 7.2V 2000mAh Nimh Batteri med enkel USB lader ( M-STYLE ) Det kompakte 2WD MB-01-chassiset gir et valg mellom tre typer akselavstand og for- eller bakhjulsdriftssystem. Giulia bruker en midtstillt motor med bakhjulsdrift. Uten å fjerne batteripakken, motoren og elektronikk fra chassiset, kan du ganske enkelt endre drivretning til akslingene og styreoverføring for å bytte mellom for- og bakhjulsdrift, lav eller høy motorstilling kan velges for bakhjulsdrevne biler. Den 4-hjuls doble bærearmsfjæringen har symmetrisk struktur og friksjonsdempere. Samlede seksjoner som motorfeste, akslinger og fjæring forenkler montering og effektivt vedlikehold. Opprinnelsen til M-Chassis-serienes historie går tilbake til desember 1994, og denne serien har vært populær på grunn av kostnadseffektive sett med et bredt utvalg av karosserier, enkelt vedlikehold og passer godt alle nivåer av sjåfører. M-05 er etterfulgt nå av MB-01 Det nye MB-01-chassiset fortsetter den tradisjonen og tillater seks oppsett ved å velge fra tre typer akselavstand, og bak- eller bakhjulstrekksystem.  Options :  Kulelager :   2 x (1280) 8x12x3.5mm 12 x (1050) 5x10x4mm  (Gummiforseglet)   4 x (850) 5x8x2.5mm The MB-01 Chassis The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. Specifications ♦Length: 385mm, width: 168mm, height: 132mm ♦Wheelbase: 225mm (Middle) ♦Tread: 140mm (front & rear) ♦Tire width/diameter: 25/59mm (front & rear) ♦Bathtub type chassis ♦Midship motor, rear-wheel drive ♦4-bevel differential gear ♦3-piece steering tie-rod ♦4-wheel double wishbone suspension ♦Friction dampers ♦Gear ratio = 5.83:1 (using kit 29T pinion) ♦Type 540 motor ♦Electronic speed controller (ESC) is sold separately.   This classic body is revitalized with a new color scheme inspired by club racers in days gone by. A metal-plated front grille and stickers with markings in the colors of the Italian tricolor are included. Plated side mirrors are separately molded. Stickers recreate the rear combination lamps. Classic wheels are paired with treaded radial tires. The compact MB-01 chassis. For this model, it is assembled with a middle wheelbase: 225mm. The servo is installed in the right-rear of the model, and moves the steering linkage via a link rod. The four-wheel double wishbone suspension uses symmetrical arms. Coil sprung dampers come as standard, although you can upgrade them with M-Chassis aluminum dampers if you wish. The motor resides in the left rear, with power going to the wheels via propeller shaft. The motor mount is assembled as a unit, and secured to the chassis using two screws. The 4-bevel gear differential is the same as that on the TT-02; this chassis is compatible with TT-02 Hop-Up Option differentials. The flip-up battery holder gives quick access. Rear double wishbone suspension gives a stable drive. Suspension elements are also unitized to help with pit and repair work. This versatile chassis can be assembled into three wheelbases and two drivetrain layouts.

Tamiya 58733 -  BT-01 Toyota Supra (JZA80) Kit Litt historikk: Fjerde generasjon Toyota Supra (JZA80) ble annonsert som Toyotas flaggskips sportsbil i 1993. RZ-modellen i toppklasse benyttet en 3-liters inline-6 ​​sylindret turbomotor med 280 hk, 6-trinns girkasse, 4-hjuls dobbelt bærearmfjæring og ventilert skivebremser foran og bak. Den muskuløse formen og høyspesifiserte ytelsen hypnotiserte fans over hele verden og oppnådde suksess i motorsportsløp.  Om byggesettet: Dette byggesettet leveres med et realistisk klart Supra karosseri i polykarbonat/lexan. Flere alternativer: 2WD BT-01-chassiset gir et valg mellom to typer akselavstand og for- eller bakhjulsdriftssystem, uten å fjerne batteripakken, motoren og utstyrsoppsettene fra midtrammen,  du kan ganske enkelt endre festeretningene til differensialen og styrekoblingen for å bytte mellom for- og bakhjulsdrift; motorposisjon foran (FR) eller midmontert bak (MR) kan velges for bakhjulsdrevne biler. Den 4-hjuls doble bærearmsfjæringen har symmetrisk struktur og friksjonsdempere. Samlede seksjoner som motorfeste, sluttdrev og fjæring forenkler montering og effektivt vedlikehold. Et MR-oppsett anbefales for denne modellen av Supra, mens FR-oppsettet er likt det for en bil i full størrelse og vil være verdt et forsøk om man ønsker. Spesifikasjoner Lengde: 457 mm, Bredde: 186 mm, Høyde: 125 mm Akselavstand: 257 mm (standard) Slitebane: 157 mm (foran og bak, chassisbredde: 184 mm) Dekkbredde/diameter: 27/67 mm (foran og bak) Badekar Chassis Bakhjulsdrift/Forhjulsdrift Plast 4 bevel differensialdrev 3-delt styrestag 4-hjuls dobbel bærearmfjæring Friksjonsdempere (foran og bak) Girforhold = 8,27:1 (med sett standard 22T pinion) Type 540-børstemotor Elektronisk hastighetskontroller (ESC) selges separat. med medfølgende motor kan vi anbefale denne HW1060 Nødvendig tilbehør: 1 x servo anbefalt minst 6.5kg Radio/Motaker Batteri og Lader 7.2V Nimh eller *7.4V Lipo(2S) Lader for valgt batteri 1-2 bokser lakk (PS)   The classic Supra form is artfully captured by the polycarbonate body and several separately molded parts. Separate headlight cases give the front a highly realistic look. Side mirrors are molded separately in ABS plastic. The gently curving rear wing is also molded in ABS. 10-spoke wheels are paired with treaded semi-pneumatic tires. Here is the BT-01 chassis, which is a joy to build and work on thanks to its use of various unitized sections. The servo is housed in the right rear, with a long link rod used in the 3-piece setup. The double-wishbone suspension uses symmetrical arms. While coil-sprung dampers are fitted as standard, the BT-01 can be used with separately sold TRF Special Dampers (Hard Black Coating). The unitized motor mount is affixed to the chassis with 2 screws. Power goes from the midship rear motor to the rear wheels via propeller shaft. The BT-01 uses a plastic 4-bevel differential gear, and is compatible with TT-02 Hop-Up Options such as ball differentials and oil-filled differentials. Here is the rear double-wishbone suspension. As the car corners, rear wheels gain toe-in for better stability. Suspension components are also unitized for smoother pit work. Flip-up battery holders let you change the battery quickly. A transponder holder is also included – great for races! As illustrated here, the BT-01 can be assembled in 3 different setups, each offering 2 wheelbases: 251mm and 257mm.