Beier 10A Mini Speed Controller MFR-1210

Art.nr: MFR-1210

390,-

Du vil motta en e-post så snart produktet er på lager!

En ukjent feil har oppstått. Prøve igjen

Beier -Electronic

4 På lager

Informasjon
Produsent

Beier 10A Mini Speed Controller MFR-1210

Liten og hendig ESC for børstemotorer opp til 10A strømtrekk.

Mini speed controller for brushed DC motors
Perfect for auxilary drives and the
Complete speed control for small models
Supply voltage: 6 - 16 V
Max. current of motor: 10 A
BEC with 5,0 V and 0,5 A (short-term max. 1 A)
Smooth EMF motor brake
PWM frequency of 20 kHz
Soft polarity reversal through permanent monitoring of motor speed
Control of temperature, current and correct signals from receiver
Small size: 26 x 19 x 6 mm

Description

The small but versatile mini speed controller MFR-1210 is perfect to control smooth forward and backward movements of auxilary drives, as well as the complete drive of small models.

Possible examples of motor movements are trailer supports, crane arm movements, tilt function or the movement of a tank tower can be easily controlled.

The MFR-1210 is suitable for brushed motors up to 10 A and includes a short circuit protected BEC with 5V. With a PWM frequency of 20 kHz, there are no disturbing noises audible.

With the EMF motor brake the model can actively be stopped. The brake starts as soon as the throttle stick is in neutral position (center). When rolling out, the engine is continuously decelerated to a complete stop. When accelerating, the engine brake automatically releases.

For gentle operation of the engine and battery, the engine speed is continuously monitored. This is especially important when changing between forward and backward drive. Before polarity reversal, the motor is decelerated to a complete stop and then accelerated in the other direction.

The speed controller requires no additional teaching of the transmitter. The zero point (center position) of the gas channel is suitable for almost all remote controls at 1.500 ms.

The MFR-1210 involves several protection features. With acoustic signals it warns of over-temperature, over-current and missing gas channel signals from the receiver.

To control the motor movements and to equip it with the right sound, the speed controller can be connected to the servo outputs of following BEIER modules:

More information can be found in our operating manual: MFR-1210 (PDF).

Technical data

Supply voltage (U_b):	6 – 16 V DC
Power consumption:	Stand-by current: ca. 3 mA
Motor current:	max. 10 A
BEC voltage:	5,0 V
BEC current:	0,5 A (short-term max. 1 A)
Proportional inputs:	1 piece (1,000 - 2,000 ms) Fix zero point at 1,500 ms Full throttle forward at 2,000 ms Full throttle backward at 1,000 ms
Protection features:	Short circuit protection at motor output stage Short circuit protection at BEC Temperature monitoring Failsafe for proportional inputs
Cables for connection:	Battery connection: 2 x 0,5 mm², length ca. 25 cm Motor connection: 2 x 0,5 mm², length ca. 25 cm Receiver connection with servo cable: 3 x 0,14 mm², length approx. 30 cm
Permitted ambient temperature:	0 – 60° C
Permitted humidity:	Max. 85 %
Size:	26 x 19 x 6 mm
Weight:	17 g