Futaba R3008SB T-FHSS 8 kanals mottaker

Art.nr: R3008SB

959,-

Du vil motta en e-post så snart produktet er på lager!

En ukjent feil har oppstått. Prøve igjen

Futaba

Informasjon
Produsent

Futaba R3008SB T-FHSS 8 kanals mottaker

8-kanals mottaker, kun kompatibel med sendere som har T-FHSS-modulasjon. Det er også mulig å bruke kanal 9 og 10 via S.Bus.

In spite of its small size of only 47.3 x 24.9 x 14.3 mm and a weight of just 11 g the R3008SB receiver is a multi-talented device. It features an integral telemetry transmitter, and can send up to 32 telemetry data sets to the ground over a range of up to 1000 m.

Naturally the receiver features eight PWM outputs for normal servos. Channel 8 is switchable to S.BUS(1) mode, enabling up to ten S.BUS(1) servos or other devices to be connected to this output.

The switched channels 9 and 10 can only be accessed via the S.BUS 1 or 2 output, and require suitable S-BUS compatible devices / servos. Both S-BUS2 servos and sensors can be connected to the separate bi-directional S.BUS2 socket; up to 32 telemetry channels can be transmitted. The integral transmitter sends the telemetry data present at the S.BUS2 socket to the T-FHSS® transmitter, where the data are displayed on-screen or generated in audible form (speech, vibration alarm, sound or beeper).
When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.

This receiver "only" works with the new telemetry-capable T-FHSS® transmitters. It is not compatible with FASST or FASSTest® or S-FHSS transmitters or these types of modulation.

Specifications
Channels: 10
Weight: 11g
Antenna length: 14cm

The R3008SB receiver features bi-directional communication with a T-FHSS Air-2.4GHz Futaba transmitter using the S.BUS2 port. Using the S.BUS2 port an impressive array of telemetry sensors may be utilized. It also includes both standard PWM output ports and S.BUS output ports.

R3008SB Specifications:

Applicable systems: Futaba T-FHSS Air-2.4GHz system transmitters
T-FHSS Air-2.4GHz system/S.BUS2 and S.BUS port and 8 channels for conventional system receiver
Dual antenna diversity
Size: 24.9 x 47.3 x 14.3 mm
Weight: 10.1 g
Power requirement: 4.8V to 7.4V
Battery F/S Voltage: It sets up with a transmitter
Extra Voltage port: 0 ～ 70V DC

* Be sure that when using ESCs regulated output the capacity of the ESC must meet your usage condition.

http://www.futabarc.com